hey guys, im new to all of this rooting and unlocking business( recent apple guy) now i have a gigantic problem. I deleted my operating system. Like an idiot! I was a little under the weather aka drunk and rummaging through my phones settings , trying to restore my device to factory, when i accidentally deleted everything, including my operating system. my device is unlocked and rooted. I do not have the original computer i used to do the root. Can someone please help me with a list of what i need to download and do in order. I am very confused and quite near suicide! jk, not funny. Any help will be greatly appreciated and may recieve a donation. please and thank you.
re: stock-rooted
towerslug420 said:
hey guys, im new to all of this rooting and unlocking business( recent apple guy) now i have a gigantic problem. I deleted my operating system. Like an idiot! I was a little under the weather aka drunk and rummaging through my phones settings , trying to restore my device to factory, when i accidentally deleted everything, including my operating system. my device is unlocked and rooted. I do not have the original computer i used to do the root. Can someone please help me with a list of what i need to download and do in order. I am very confused and quite near suicide! jk, not funny. Any help will be greatly appreciated and may recieve a donation. please and thank you.
Click to expand...
Click to collapse
Here is the best and easiest way to start fresh with stock rooted T999 Jellybean 4.1.1 rom.
Here is the step by step guide:
After you have followed these instructions your phone will be in the same condition
as it was the day you have purchased it except with the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your desktop and unzip the file
using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Related
i have a galaxy s3 and i tried to install a rom and mess around with it and its stock on a boot screen that has a spinning cirlce and says CyanogenMod and continues to spin and i dont wanna re do my phone how can i just get it back to the way it was before without losing anything thank you
Restore your nandroid.
Other way is to factory reset, which will wipe your data.
Aerowinder said:
Restore your nandroid.
Other way is to factory reset, which will wipe your data.
Click to expand...
Click to collapse
is there any other way i have tons of personal information on my phone
You need to factory reset in order to install Cyan anyways or most custom roms.
Best alternate route is to sideload a touchwiz rom, but that will probably fail also now. You need to factory reset to boot back up probably. I suggest more reading before doing things, as you are probably upset now.
re: stock rom
Eli9144 said:
i have a galaxy s3 and i tried to install a rom and mess around with it and its stock on a boot screen that has a spinning cirlce and says CyanogenMod and continues to spin and i dont wanna re do my phone how can i just get it back to the way it was before without losing anything thank you
Click to expand...
Click to collapse
Easy step by step guide:
After you have followed these instructions your phone will have stock rom except for
benefit of being rooted and you will NOT loose any pictures, videos. contacts or music.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Misterjunky said:
Easy step by step guide:
After you have followed these instructions your phone will have stock rom except for
benefit of being rooted and you will NOT loose any pictures, videos. contacts or music.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Click to expand...
Click to collapse
For the love of all that is holy, make a new thread. Put the contents of this post in said thread. Put link to said thread in your signature. Tell people to look at your signature instead of clogging my screen with this crap several times a day.
re: contents
Aerowinder said:
For the love of all that is holy, make a new thread. Put the contents of this post in said thread. Put link to said thread in your signature. Tell people to look at your signature instead of clogging my screen with this crap several times a day.
Click to expand...
Click to collapse
Can you please tell me where I can find the "Un-Thank" button?
I looked everywhere but cannot find it. LOL
Multiple times a day, this huge post pops up, as it is helpful, it is annoying along with the Einstein head.
i just tried to put a stock rom on my phone and while it was flashing my phone just rebooted and now my phone wont boot or go into recovery...all i see is the teamwin screen then it just wont go into recovery it will kind of start then just vibrate and galaxy s3 will pop up and then just stay like that...please help...should i just use odin to flash my recovery again...?
re: Odin Flash
phordych05 said:
i just tried to put a stock rom on my phone and while it was flashing my phone just rebooted and now my phone wont boot or go into recovery...all i see is the teamwin screen then it just wont go into recovery it will kind of start then just vibrate and galaxy s3 will pop up and then just stay like that...please help...should i just use odin to flash my recovery again...?
Click to expand...
Click to collapse
If the phone will not boot and it will not go into recovery mode then
here is a sure way to fix it.
Easy step by step guide:
After you have followed these instructions your phone will in the same condition
as it was the day you purchased it with the benefit of being rooted.
Download the stock-rooted T999 firmware: http://www.androidfilehost.com/?fid=9390169635556426451
After downloading it make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Here is a link for ODIN which is required for flashing the stock rooted firmware (a windows app) http://d-h.st/Q14
Download and extract Odin into the same folder you made containing the TAR file.
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
I was waiting for this all morning HAHA @Aerowinder
If all else fails, and even if you are successfull, buy one of them. They are magical.
http://www.ebay.com/itm/UNBRICK-SAM...er_Cell_Phone_Accessories&hash=item4d0c5441f5
ebay search usb jig samsung.
I cannot find the return to stock. How do I do it?
re: return to stock
joeym11 said:
I cannot find the return to stock. How do I do it?
Click to expand...
Click to collapse
Easy and sure way to return your phone to stock condition: Here is the step by step guide:
After you have followed these instructions your phone will be in stock condition
as it was the day you have purchased it.
Download the stock Samsung Galaxy S3 Jellybean v4.1.1 T999 firmware: http://www.androidfilehost.com/?fid=22940013536739731
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Im running clockwork 6.0.3.1 and tried to install the latest CM 10 build. I did all the wipes and all. But im getting an error cant mount external_sd. I just rooted my phone yesterday and everything went fine. I did a backup of my stock rom also but since the sd card will not mount I cant do a restore either. Please help. Do I need to unlock the bootloader? I just rooted using Odin.
re: solved
dpshptl said:
Im running clockwork 6.0.3.1 and tried to install the latest CM 10 build. I did all the wipes and all. But im getting an error cant mount external_sd. I just rooted my phone yesterday and everything went fine. I did a backup of my stock rom also but since the sd card will not mount I cant do a restore either. Please help. Do I need to unlock the bootloader? I just rooted using Odin.
Click to expand...
Click to collapse
First thing to try is to boot into cwm and do a factory reset and reboot the phone that should fix the ex sdcard issue.
If that don't work the only other thing to do is to do an ODIN flash TAR file of the stock-pre-rooted 4.1.2 T999
Tmobile Jellybean rom and from there using rom manager you will be able to restore your backup
or flash any other cwm flashable zipfile.
good luck!
Anyone have a link to the TAR file of the stock-pre-rooted 4.1.2 T999?
re: download link
dpshptl said:
Anyone have a link to the TAR file of the stock-pre-rooted 4.1.2 T999?
Click to expand...
Click to collapse
Here is the download link for it.
T999_UVDMD5
good luck!
mister, since you are so helpfull. I need some more help with Odin. Do i select PDA in Odin and only have F. reset checked? I used Odin to root but not to restore.
re: odin
dpshptl said:
mister, since you are so helpfull. I need some more help with Odin. Do i select PDA in Odin and only have F. reset checked? I used Odin to root but not to restore.
Click to expand...
Click to collapse
YES PDA but unzip the rooted rom first, copy it into an empty folder and copy odin into the same folder.
Best thing to do is to close odin and open it again to be sure that it's in default settings mode.
Only use the PDA option to get the tar file into it.
Do not change any of the settings in odin, leave it default and be sure that the [COM:XX] lights up
after you get the phone into download mode and plug in the usb cable to the computer and your phone.
Once it lights up then start the flash. Have patience after it's done it will take it 5-10 minutes to fully reboot after the flash.
This guide will get your phone back up and running properly
Easy and sure way fix your problem - Here is s step by step guide:
Download the newest pre-rooted Samsung Galaxy S3 T999 Jellybean v4.1.2 rom: T999_UVDMD5
After downloading make a folder on your computer's desktop and unzip the
file using Winzip or 7zip so the .TAR file is in the new folder you just made.
Download and extract Odin into the same folder you made containing the TAR file
Here is the link for Odin: http://d-h.st/Q14
Download ODIN which is required for flashing the stock rooted firmware (a windows app)
Download the Odin Flash firmware for T999 Tmobile then copy it to the same folder as Odin
Run Odin by double clicking the Odin.exe within the same folder as the TAR file you extracted
Turn off your phone and boot into DOWNLOAD MODE (Volume Down + Home + Power Hold until phone powers up, then release and press Volume Up to enter Download Mode)
Once in Download Mode, connect the USB/Charger cable to the phone and plug into the USB port on your computer.
You should now see a COM** port listed toward the top-left of Odin (under ID:COM)
Click on the PDA button in the middle-right area of Odin.
Browse to and select the Firmware you downloaded (TAR file)
Make sure Auto-Reboot and F. Reset Time are the only options checked and that PDA is the only other thing checked.
TRIPLE CHECK your settings and that you have selected the correct firmware for your model phone and are using the correct options.
If you are using a laptop, make absolutely sure you are plugged in, or if on battery, that it is charged enough and will not go into sleep mode during flash.
Click Start to begin the flash. This will take a while, so be patient!
Once complete, in the top-left box in Odin, it will say PASS and the phone should have automatically rebooted.
You may unplug the phone and close Odin if you wish.
Wait at least 5-10 minutes for the system to boot the first time and then build its cache!
(It may seem to hang during boot, this is normal and you must be patient!!!)
Good Luck!
As a general FYI, if you think you need to repartition your phone it is also possible that your phone has experienced:
a) A hardware issue, possibly partial or total emmc failure.
b) A mismatch between bootloader (sboot.bin) and trustzone (tz.img) versions. See this post or my MK6 stock thread for some possible options to fix this.
As a step of last resort to recreate the partition table on your phone, a pit file may be what you need. This can be done in either Odin or Heimdall.
Warning - repartitioning your phone may erase all data and might cause other unintended consequences. You assume all risk.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
To use a pit file in Odin, this is typically done as part of a flashing a stock rom package, like the LJ2 or MA4 package for the i317 (or similar package for the i317m). You specify the pit file in the PIT section, make sure the repartition box is checked, and then add the rom package in the PDA section like usual.
If you are running an official 4.3 or later bootloader you will not be able to successfully flash a stock firmware package that contains earlier bootloaders - Odin will hang and you will need to find a different stock package to flash that does not contain a bootloader. (i.e. If you took the the i317 4.3 OTA and are running the MK6 bootloader or a later bootloader, you'll want to avoid UCAMA4)
The attached zip includes pit files for both the i317 and the i317m. The partition mapping is the same for both (see the included analysis files), but the pit files have unique security signatures which are accepted only by the bootloader of the specific model phone for which they are intended. I've tested the file for the i317 and can confirm that it works as intended. The file for the i317m was pulled the same way by an XDA member (thanks @plemen !) with an i317m and I've confirmed it is formatted correctly. It has now been confirmed as working.
If you want to learn a bit more about pit files, check out this thread by Adam Outler:
http://forum.xda-developers.com/showthread.php?t=2540480
Very interested in this, as I need the pit file for my I317. Question about the bootloader, though.... I've never taken an OTA, just flashing CM and OmniROM nightlies (was on 4.4.2 when my phone committed suicide). Should I be safe to use this pit file? And what factory firmware would you recommend to go with it?
pit files should be back in a day or two (I'll be testing over the weekend).
Depending on what happened to your phone it's still highly probable that your pit (partition) data is fine. There's a way to confirm this using Heimdall - when time permits I'll add instructions to post #2. That's a safer first step than attempting a repartition.
As for bootloader and firmware - if you've never taken an OTA, and you're not on a 4.3 bootloader your best bet for stock firmware is UCAMA4. It's a more complete and somewhat newer package than the other option (UCALJ2). You can get this from sammobile, or a mirror copy I have linked in post #2 here:
http://forum.xda-developers.com/showthread.php?t=2589891
that post also has information on a couple apps you can load that will allow you to check which bootloader you have loaded once your phone is operational.
Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.
anine said:
Thanks for doing this! Did you have any luck over the weekend? Looking to re-partition as I'm unable to mount.
Click to expand...
Click to collapse
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?
Zen Arcade said:
I expected a test phone on Saturday that didn't arrive until Tuesday thanks to the USPS getting the day off on Monday. Once I confirm the files work as intended I will repost them.
As for the issue you are having - what partition isn't mounting? Can you provide more detail?
Click to expand...
Click to collapse
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Help
anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...
anine said:
The Note 2 (ATT) suddenly rebooted and stuck on the "Samsung Galaxy Note 2" screen. A couple reboots and a battery pull did not solve the issue. I even let the phone stay on the screen in the event it needed to do some sort of repair.. but after an hour, nothing changed.
I loaded CWM recovery and got recovery mount errors. Also, I am unable to mount any of the internal file system when attempting from the advanced menu. After a couple of hours of following tutorials I went into download mode and installed the stock ATT rom. It was successful but still did not boot (attempted this twice). I came upon a few suggestions for similar issues that said the PIT file was needed to repartition. I used Beanstalk 4.4.2 before the crash.
Click to expand...
Click to collapse
The symptoms you describe are similar to those I've seen on the Q&A forum recently. I don't want to be the bearer of bad tidings, but I suspect you have a partial emmc (hardware) failure.
My time during the week is limited so I expect to have testing done this weekend.
terpencar said:
I desperately need this PIT file as well.. not on 4.3 however..I can get to download mode and into recovery but it spits a bunch of errors about unable to mount /cache etc...
Click to expand...
Click to collapse
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
http://www.androidfilehost.com/?fid=23060877490003986
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.
rob_z11 said:
I had similar issue, and was able to resolve it by following this thread. YOu need to restore factory original by following this thread from XDA.
Please don't forget to Thank
The files provided are only for phone I317 and not I317M
Instructions:
1. Download "back to stock" zip folder I uploaded. It contains all the files needed. No need to search around.
2. Unzip the file and extract the folder to your desktop.
3. Open folder and install Samsung drivers if not already done so.
4. Now make sure you have root and custom recovery on the phone. Turn the phone off. Hold volume up, home and power button at the same time.Wait till u see custom recovery screen and then let go off all the buttons.
5. Once in recovery... delete data, system, cache, dev cache like you want to flash a new rom. Turn the phone off by pulling the battery or see option for power off device under custom recovery.
6. Once the phone is completely off lets get into download mode. Hold volume down, home and power button until you see the screen with an option to press volume up to get into download. Press volume up to enter download mode when asked.
7. Now open odin3.07 I provided in the folder u downloaded. Once open connect your phone via usb. Windows should install device drivers. Once thats done, you should see com## on the Odin software.
8. On odin software you should see button called PDA. Click on it and browse to the file called KIES_HOME_I317UCALJ2_I317ATTALJ2_215287_REV04_user _low_ship.tar. in the folder provided by me. select it and hit ok. Odin will process the file. It will take max 2 to 3 min.
9. Before you click start on Odin make sure auto reboot and F. reset time is checked only. Everything else unchecked. Click start button. Odin will start flashing the factory firmware. It will take time.
10. Once Odin is done flashing. phone will reboot. Now you can disconnect the usb cable. When phone is fully rebooted, skip all the prompt and get to home screen.
11. Turn the phone off again and get into download mode. Connect usb cable to computer with Odin open. Click Pda and select file called CF-Auto-Root-t0lteatt-t0lteatt-samsungsghi317.tar. Let Odin process it and then click start. Once flashing the root file is done. Phone should reboot to home screen. Now you have root. The reason we need root is to get rid of counter # in download more. It should say zero.
12. Connect your phone to computer while on the home screen. Open phone internal storage and go to download folder and copy Triangle away.apk into it.
13. Go into settings and security and check unknown sources.
14. Go to apps and open application "my file". Go to download folder and select triangle away application to install. install it. Open application application and scroll down and select reset counter option. Make sure your are connected to wifi. Confirm you phone is I317 and triangle away will download the file. Your phone should reboot into some type of reset counter recovery screen. follow the instruction on the screen to reset the counter. After that phone should reboot.
15. Once rebooted uninstall triangle away apk. Now open super user application and scrool down and click fully unroot. When done go into stock recovery and clear data and cache. reboot phone. All done. Your counter is set to zero. Your phone should read normal under settings.
You can update your phone under settings from att servers.
Enjoy.
Thanks to chainfire for his triangle away app and root for our device.
Click to expand...
Click to collapse
Thanks.. It just hangs at system.img in odin
Nice job Zen
Sent from my SGH-I317 using XDA Premium 4 mobile app
Pit files are back up and attached to the OP. The i317 pit file is tested and confirmed working.
The i317m file is identical, except for the security signature. I'm currently looking for someone with a healthy i317m willing to test flash the i317m pit file to confirm it works. (I would do this myself, but I don't have an i317m).
Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!
My phone was not booting and stopped at Samsung logo. After the pit file and stock rom, my phone is live again. I am still having issue with storage but at least I have good starting point.
thanks
Works fine on i317m
anine said:
Unfortunately it did not work for me. emmc failure suspected. Strange thing is that in ODIN I can still "Successfully" install a ROM.. and even the PIT file succeeded. I still got a logo screen for several minutes.
Fortunately for me, I have an additional mainboard from a otherwise damaged note 2. I'll be swapping that out.
Thank you anyway. Hope your file helps others!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2626593
qkster said:
http://forum.xda-developers.com/showthread.php?t=2626593
Click to expand...
Click to collapse
See posts #9 and #13 on the thread above for the specific potential solution to try.
Corrupt pit file it says. for note 2 att help
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE
kumar_420 said:
I have a Att note 2 i flash the mj9 firmware using mobile odin first. Then i formatted storage, data, system, and cache. And now its says i have NO ios Installed with is true but when i try flashing another rom in TWRP it fails iv'e try stock ATT, Jedi Rom, MeanBean Rom. now i tryed to flash stock firmware through J Odin but it always say corrupt pit file...Someone Please Help MEE
Click to expand...
Click to collapse
Err mj9 is verizon haha
Sent from my lightning fast Note II running MeanBean 2.0 SuperCharged