Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
bradhoschar said:
Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
Click to expand...
Click to collapse
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Okaham said:
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Click to expand...
Click to collapse
You got that right.
:thumbup:
Sent while sleeping in chair.
Okaham said:
since your device is still an AT&T branded Galaxy S III (SGH-i747), you must keep with ROMs designed for that phone. flashing T-Mobile branded Galaxy S III (SGH-T999) ROMs will brick your device, same thing goes for flashing modems.
just because your SIM and Carrier is now T-Mobile, doesn't mean your phone is.
Click to expand...
Click to collapse
Wrong. Flashing an rom meant for the AT&T variant of the S3 on a T-Mobile variant S3 and vice versa will not brick the device. APN setting may get messed up and you have to enter them manually but it will not brick the device. Flashing a ROM for the international S3 on a U.S. variant of the S3 and vice versa will brick the device.
I wouldn't recommend flashing modems between the variants of S3s, that may or may not brick the device but wouldn't try it.
|When Emotion Goes up, Logic Goes Down|
---------- Post added at 03:40 PM ---------- Previous post was at 03:36 PM ----------
bradhoschar said:
Here's the issue. I purchased the At&t s3 (SGH-I747) last year. Long story short, I wanted to go to T-Mobile prepaid with the same phone.
I purchased the SIM activation kit for $10, popped my SIM in and it worked!
Before I put the SIM in it though, I paid for an unlock code. I still have the code.
No 'Network Unlock' screen.
No prompt for my unlock code.
I am getting H+ speeds with the at&t s3 on T-Mobile prepaid without doing ANYTHING.
My question is:
Why cant I get to the unlock screen? I have tried to dial "#7465625*638*# for the prompt to popup and NOTHING.
Can someone tell me...
1. Can I flash a T-mobile rom to this phone? (every time i try I get a build.prop error, even after changing the model to the T999 and all that jazz),
so I can't install a T-Mo rom?
2. Do I have to flash a modem/radio or anything else like that?
3. Or, should I just continue to flash At&t Roms with the t-mo prepaid sim?
I have searched for a while now, and noone has my problem. I never expected to just switch sim's and it would work, so ANY help would be appreciated.
Thanks!
Click to expand...
Click to collapse
If you want to unlock the S3 (you must be stock to do this, stocked rooted may work, but I'm not sure):
Just dial the following keys *#197328640#
Main Menu
[1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
Options [3]Perso SHA256 OFF
(after choosing this option, wait about 30 seconds, then go back one step by pressing the Menu button then select Back, now you are in
[6] Network Lock then choose
[4] NW Lock NV Data INITIALLIZ ..... wait for a minute then reboot your phone
|When Emotion Goes up, Logic Goes Down|
Hello.
If you have signal then why are you trying to use the code? It is unlocked already!
im not an expert but this is what i know from reading a lot:
1.- I installed a t-mobile (t999) rom modified to work in a att s3 (i747), i think you can flash a any rom from the t999 section (i am not sure about this)
2.- Do NOT try to install a modem from t-mobile or you will hard brick your phone.
3.- Thats a good idea, do it and let me know if it works.
I used this files to convert an i747 to a t999 http://forum.xda-developers.com/showthread.php?t=1771021&page=25 (read from post #246) so now i use customs roms for the t999 i did it because where i live do not have good signal, was stuck at edge and with those files now i have 3g signal.
Btw, i am in the $30 prepaid t mo plan.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
re: Hmm
xmanberserker said:
Hello.
If you have signal then why are you trying to use the code? It is unlocked already!
im not an expert but this is what i know from reading a lot:
1.- I installed a t-mobile (t999) rom modified to work in a att s3 (i747), i think you can flash a any rom from the t999 section (i am not sure about this)
2.- Do NOT try to install a modem from t-mobile or you will hard brick your phone.
3.- Thats a good idea, do it and let me know if it works.
I used this files to convert an i747 to a t999 http://forum.xda-developers.com/show...771021&page=25 (read from post #246) so now i use customs roms for the t999 i did it because where i live do not have good signal, was stuck at edge and with those files now i have 3g signal.
Btw, i am in the $30 prepaid t mo plan.
Click to expand...
Click to collapse
#1: If you have a Unlocked AT&T I747 Galaxy S3 you don't need any files to convert it to work on any T999 Tmobile roms.
#2: You can use any T999 Tmobile custom roms as long as you have an Unlocked & Rooted AT&T Galaxy S3 I747 Phone.
#3: There is no such thing as installing or flashing any files which would would change the frequency for 3G on a I747 phone.
#4: Your link is dead... LOL
#4: Your link is dead... LOL[/QUOTE]
http://forum.xda-developers.com/showthread.php?t=1771021&page=25 Fixed
Misterjunky said:
#1: If you have a Unlocked AT&T I747 Galaxy S3 you don't need any files to convert it to work on any T999 Tmobile roms.
#2: You can use any T999 Tmobile custom roms as long as you have an Unlocked & Rooted AT&T Galaxy S3 I747 Phone.
#3: There is no such thing as installing or flashing any files which would would change the frequency for 3G on a I747 phone.
#4: Your link is dead... LOL
Click to expand...
Click to collapse
That is not true. Before following these instructions ( http://forum.xda-developers.com/showthread.php?t=1771021&page=25 ) I could NOT install any t-mo rom as CWM verifies the make/model before installing the rom.
Hence, me having the 'installation cannot continue' build.prop=d2att.
So, now AFTER flashing the 4 files, I was able to install 3 different T-Mobile ROMS. XTREMEPERIA ( http://forum.xda-developers.com/showthread.php?t=2199018 ) was the only one that is giving me 4G. I know, I know, its all in the APN settings, but this is the only one that gave me truly 4G speeds with a T-Mo sim.
re: 3G/4G
bradhoschar said:
That is not true. Before following these instructions ( http://forum.xda-developers.com/showthread.php?t=1771021&page=25 ) I could NOT install any t-mo rom as CWM verifies the make/model before installing the rom.
Hence, me having the 'installation cannot continue' build.prop=d2att.
So, now AFTER flashing the 4 files, I was able to install 3 different T-Mobile ROMS. XTREMEPERIA ( http://forum.xda-developers.com/showthread.php?t=2199018 ) was the only one that is giving me 4G. I know, I know, its all in the APN settings, but this is the only one that gave me truly 4G speeds with a T-Mo sim.
Click to expand...
Click to collapse
You are right, clockworkmod (Rom Manager) does verify, however if you select
and flash the Tmobile T999 recovery image when flashing clockworkmod recovery
all is fine.
Another thing, if you have a unlocked i747 and flash any Tmobile cwm zip file rom as
soon as it reboots and you check the network in the phones settings it will display
"T-Mobile US" and will work properly without the need of any other files or conversions.
However the Unlocked I747 will never work with Tmobile's 3G or 4G networks.
Misterjunky said:
You are right, clockworkmod (Rom Manager) does verify, however if you select
and flash the Tmobile T999 recovery image when flashing clockworkmod recovery
all is fine.
Another thing, if you have a unlocked i747 and flash any Tmobile cwm zip file rom as
soon as it reboots and you check the network in the phones settings it will display
"T-Mobile US" and will work properly without the need of any other files or conversions.
However the Unlocked I747 will never work with Tmobile's 3G or 4G networks.
Click to expand...
Click to collapse
Ahh...good tip about CWM
I currently have 4g on my unlocked S3 from at&t currently on T-Mobile.
And, when I was on stock, I had 3g
re: Tmobile Network.
bradhoschar said:
Ahh...good tip about CWM
I currently have 4g on my unlocked S3 from at&t currently on T-Mobile.
And, when I was on stock, I had 3g
Click to expand...
Click to collapse
Yes but when you were on stock you were on the AT&T network not Tmobile.
Misterjunky said:
Yes but when you were on stock you were on the AT&T network not Tmobile.
Click to expand...
Click to collapse
No, that is incorrect. With the 4 files I flashed, I was on T-Mobile network. It was a T-Mobile ROM, T-Mobile sim, and T-Mobile radio.
bradhoschar said:
No, that is incorrect. With the 4 files I flashed, I was on T-Mobile network. It was a T-Mobile ROM, T-Mobile sim, and T-Mobile radio.
Click to expand...
Click to collapse
Quit saying you are using a T-Mobile radio before you help someone brick their phone. The radio files are NOT interchangeable between ANY of the US variants!
EtherealRemnant said:
Quit saying you are using a T-Mobile radio before you help someone brick their phone. The radio files are NOT interchangeable between ANY of the US variants!
Click to expand...
Click to collapse
Oh, my bad. I thought 'modem' and 'radio' were the same thing.
THEY ARE!!!!
Notice in the picture how under the 'phone' tab, it says MODEM.
Yes, I flashed all 4, and now have a t-mobile setup on an at&t s3.
bradhoschar said:
Oh, my bad. I thought 'modem' and 'radio' were the same thing.
THEY ARE!!!!
Notice in the picture how under the 'phone' tab, it says MODEM.
Yes, I flashed all 4, and now have a t-mobile setup on an at&t s3.
Click to expand...
Click to collapse
You need to specify that you are using an engineering image that T-Mobile used on the 747 before the T-999 was available to test the device. In general if you flash a T-Mobile radio image to a 747, you risk losing calls and data at minimum and a hard brick at worst. It is imperative to make sure to point out that it only works with THAT engineering set.
EtherealRemnant said:
You need to specify that you are using an engineering image that T-Mobile used on the 747 before the T-999 was available to test the device. In general if you flash a T-Mobile radio image to a 747, you risk losing calls and data at minimum and a hard brick at worst. It is imperative to make sure to point out that it only works with THAT engineering set.
Click to expand...
Click to collapse
Ahh...gotcha. Thats what it states in THAT OP, I just thought that once that build was on the phone, from that point on, any T-Mo anything would work. I did have the watermark on my wallpaper, but everything else said 't-mobile'.
But, yes in general, if you flash TMO onto AT&T, there be dragons.
Thanks all, and happy flashing!
Even with that configuration, the only thing T-Mobile you can flash is recovery and custom ROMs. A T-999 baseband or boot loader could very well cause a brick. Its a dangerous hack because it has everyone confused. For all intents and purposes, it is 747 software with T-Mobile's AWS capability. In fact it doesn't even seem to have DC-HSPA, only HSPA+ (21mbps versus 42). It has the benefit of supporting T-Mo LTE though.
Awesome
EtherealRemnant said:
Even with that configuration, the only thing T-Mobile you can flash is recovery and custom ROMs. A T-999 baseband or boot loader could very well cause a brick. Its a dangerous hack because it has everyone confused. For all intents and purposes, it is 747 software with T-Mobile's AWS capability. In fact it doesn't even seem to have DC-HSPA, only HSPA+ (21mbps versus 42). It has the benefit of supporting T-Mo LTE though.
Click to expand...
Click to collapse
Very good to know! Thanks for the info. Perhaps when T-Mo refarms their LTE, I won't have to do much to this beastly phone!
Thanks all!
:good:
bradhoschar said:
Very good to know! Thanks for the info. Perhaps when T-Mo refarms their LTE, I won't have to do much to this beastly phone!
Thanks all!
:good:
Click to expand...
Click to collapse
It doesn't make sense for T-Mobile to refarm their LTE. The 1700 AWS band is the most efficient spectrum they currently own and the AWS spectrum is going to be the most compatible across LTE networks. T-Mobile has pretty much no chance of ever getting the 700MHz that at&t and Verizon are using.
--------------------------------------------------------------------------------
can I flash a at&t stock firmware with odin to my T-Mobile m919 with out any problems...right now my s4 is sim unlocked and im on at&t network .and it seems like its working ok but signal a little on the low side and spotty lte service....would there be any advantage flashing at&t's stock firmware to use on att network ...would my service and signal be any better.....if I wanted to would I be able to flash back to T-Mobile stock firmware...will it work....anyone try this ..anything I should know before I do this ...thanks in advance
Yes, you can. but be aware that you will lose t mobile features like wifi calling which is really useful.
re: wifi calling
XxKINGxX2580 said:
Yes, you can. but be aware that you will lose t mobile features like wifi calling which is really useful.
Click to expand...
Click to collapse
He will NOT loose Tmobile wifi because he never had it, if he has an AT&T unlocked phone and
odin flashes any tmobile rom there will be no wifi calling because AT&T network itself does not offer it.
The only way he will have Wifi calling would be if he switched from the AT&T network to Tmobile network.
No one will have wifi calling regardless which rom they flash unless they have a tmobile sim card.
hope this clears things up a bit.
Misterjunky said:
He will NOT loose Tmobile wifi because he never had it, if he has an AT&T unlocked phone and
odin flashes any tmobile rom there will be no wifi calling because AT&T network itself does not offer it.
The only way he will have Wifi calling would be if he switched from the AT&T network to Tmobile network.
No one will have wifi calling regardless which rom they flash unless they have a tmobile sim card.
hope this clears things up a bit.
Click to expand...
Click to collapse
I have a T-Mobile phone I use on at&t network ...flashing at&t stock firmware wont lock my phone right ..and should be able to flash back to T-Mobile stock firmware if I wanted to right..wont relock sim or bootloader....thanks guys
re: locked/unlocked
[email protected] said:
I have a T-Mobile phone I use on at&t network ...flashing at&t stock firmware wont lock my phone right ..and should be able to flash back to T-Mobile stock firmware if I wanted to right..wont relock sim or bootloader....thanks guys
Click to expand...
Click to collapse
Nope, it won't lock or re-lock your phone, once a phone is unlocked properly it will stay that way
regardless which rom you flash and regardless if you're on the AT&T network or Tmobile network.
Do not Odin flash the AT&T stock firmware on a Tmobile phone even if it's unlocked.
If you do you will not be able to make or receive any phone calls.
You can flash AT&T or Tmobile CWM/TWRP flashable stock or custom zip file roms because
those do not contain the radio/modem images like the Odin flash firmware do.
If you odin flash back to stock Tmobile firmware you will loose root unless you re-root after flashing.
As far as bootloaders go, a Tmobile phone requires a Tmobile bootloader, but you don't need to worry
about that if you flash the stock official tmobile firmware with Odin.
All the other tmobile and at&t cwm/twrp flashable zip file roms found in these threads don't contain
any bootloaders that's why they can be flashed on any unlocked and rooted tmobile or at&t phones.
Misterjunky said:
Nope, it won't lock or re-lock your phone, once a phone is unlocked properly it will stay that way
regardless which rom you flash and regardless if you're on the AT&T network or Tmobile network.
Do not Odin flash the AT&T stock firmware on a Tmobile phone even if it's unlocked.
If you do you will not be able to make or receive any phone calls.
You can flash AT&T or Tmobile CWM/TWRP flashable stock or custom zip file roms because
those do not contain the radio/modem images like the Odin flash firmware do.
If you odin flash back to stock Tmobile firmware you will loose root unless you re-root after flashing.
As far as bootloaders go, a Tmobile phone requires a Tmobile bootloader, but you don't need to worry
about that if you flash the stock official tmobile firmware with Odin.
All the other tmobile and at&t cwm/twrp flashable zip file roms found in these threads don't contain
any bootloaders that's why they can be flashed on any unlocked and rooted tmobile or at&t phones.
Click to expand...
Click to collapse
so the hardware is different is that why you cant flash att stock firmware with odin on a T-Mobile s4
re: locked/unlocked
[email protected] said:
so the hardware is different is that why you cant flash att stock firmware with odin on a T-Mobile s4
Click to expand...
Click to collapse
Exactly, the hardware is only a little different that's why we can use the cwm/twrp flashable zipfile custom
tmobile/at&t roms with either the tmobile locked or unlocked phones or the unlocked at&t phones.
The only exception is that wifi calling only works on an actual tmobile phone with a tmobile
sim card which is on the tmobile network whether it's locked or unlocked.
[email protected] said:
--------------------------------------------------------------------------------
right now my s4 is sim unlocked and im on at&t network
Click to expand...
Click to collapse
Misterjunky said:
The only exception is that wifi calling only works on an actual tmobile phone with a tmobile
sim card which is on the tmobile network whether it's locked or unlocked.
Click to expand...
Click to collapse
Don't think it matters if WiFi calling isn't enabled.
I thought the hardware between the AT&T s4 and the T Mobile s4 was the same. I thought the reason they received different radio frequencies was in the firmware and not the hardware can anyone confirm ..
I wanted to try to flash AT&T stock firmware on my t-mobile s4 for better performance on AT&T network
[email protected] said:
I thought the hardware between the AT&T s4 and the T Mobile s4 was the same. I thought the reason they received different radio frequencies was in the firmware and not the hardware can anyone confirm ..
I wanted to try to flash AT&T stock firmware on my t-mobile s4 for better performance on AT&T network
Click to expand...
Click to collapse
I would love the answer to this question too.
The key is the Modem aka Baseband. This is the Radio file and it is hardware and carrier dependent. If you try to flash this you will mess up the bootloader and radio and you have a brick.
I'm too on AT&T network with T-Mobile phone. I'm using the stock MDL radio and it's working fine. I don't notice a difference between the 2 devices on LTE network. if T-Mobile can't lock on to LTE network, AT&T S4 won't either.
sorry to slightly threadjack.... but does that mean if i flash a custom s4 AT&T rom (i.e. "CleanRom"), i will still be going through a Tmobile bootloader \ kernal etc..?
Is there any foolproof way to "convert" an tmobile s4 to an ATT based s4?
Can't you guys just flash a popular custom rom for sgh-i337 variant and then change the radioband (or whatever it's called) sh*t manually? If you ever flash another carrier rom, make sure ur baseband is the original carrier/phone as stated before. And flash ur carrier/phone kernel(custom or stock, doesn't matter) as well.
I believe these ppl created this topic because they want the stock carrier branded firmware on their phone, so that they can have all the carrier specific features on their phone. Third party ROM is not their choice, otherwise there are tones post out there already. I believe someone must be brave enough to flash it to their phone to test that, otherwise, there is no good answer to that.
Cal-El said:
The key is the Modem aka Baseband. This is the Radio file and it is hardware and carrier dependent. If you try to flash this you will mess up the bootloader and radio and you have a brick.
Click to expand...
Click to collapse
Hi guys, anyone can tell me if this will work:
I have TMO M991 and I want to use it in Europe but have problem with network signal (not registered on network; missed calls & s... like that).
My guess is that radio is different and optimized for LTE, which we dont have here...
I m thinking of flashing I9505 stock rom and baseband...what do You think, will this improve radio reception/stable network signal?
I9505 is the version used in Europe region...
I honestly tried to find similar topics, no luck so far so pls point me in the right direction if nothing else...
Cheers!
Hello all, I recently switched over from AT&T to TMO with an unlocked AT&T GS4. My cell says that I have an invalid sim card when I try to use it as a hotspot. I called TMO and they told me not all TMO features will work on a ATT phone thats unlocked. Any walk arounds??
tony1208 said:
Hello all, I recently switched over from AT&T to TMO with an unlocked AT&T GS4. My cell says that I have an invalid sim card when I try to use it as a hotspot. I called TMO and they told me not all TMO features will work on a ATT phone thats unlocked. Any walk arounds??
Click to expand...
Click to collapse
Flash tmobile base ROM
☞ Sent from here☜???
Cant root I am on 4.3 mj9 att
Sent from my Galaxy S4
Check the att forum, pretty sure there's info there about dual booting and flashing custom rom
Same Boat...
mrhughy said:
Check the att forum, pretty sure there's info there about dual booting and flashing custom rom
Click to expand...
Click to collapse
I have an AT&T variant (unlocked) as well and I while I cannot install a recovery without Safestrap, I do have Safestrap installed. I also called T-mobile about the Wifi Hotspot not working and they advised me that it would not work on their stock rom but I could try flashing a T-mobile version. I've tried about a dozen rom's so far but I cannot get some of them to boot at all and the ones that do, I have no working Wifi. I've also tried about 6 different AT&T kernels with these roms and so far, nothing works. I 'think' this is something to do with Safestrap but I don't know for sure.
My phone is unlocked and this Tmobile rom is about to make me crush this phone, can I load the ATT rom for the skyrocket and use it with my straight talk att sim I am already using?
kcz28 said:
My phone is unlocked and this Tmobile rom is about to make me crush this phone, can I load the ATT rom for the skyrocket and use it with my straight talk att sim I am already using?
Click to expand...
Click to collapse
Will your phone not recognize your SIM? I unlocked my phone and had another SIM other than T-Mobile and it was working perfectly. But yes, you can flash ATT Skyrocket ROMS if you think that can fix your problem. I currently have the Embryo ROM on my Hercules which is meant for the Skyrocket.
ShaDisNX255 said:
Will your phone not recognize your SIM? I unlocked my phone and had another SIM other than T-Mobile and it was working perfectly. But yes, you can flash ATT Skyrocket ROMS if you think that can fix your problem. I currently have the Embryo ROM on my Hercules which is meant for the Skyrocket.
Click to expand...
Click to collapse
It works, but after an update about 2 months ago this phone is slow to load the keyboard when trying to text, closing menus and apps takes forever it didn't used to do that. I figured trying an ATT rom might fix the problem and might have a way to block OS updates.