Hi there,
I am currently old venom rom (2.7.1) based on ICS (4.0.4), I want to switch to Jellybean/AOKP with JB base.
Do I need to go through the whole relocking bootloader, getting CID , flashing update fiasco? because I sort of lost my unlock code.bin file and those seem a little too much work. In any case, I'm very much of a novice, so I'd be extremely grateful to anyone who could tell me the next steps in a bit of details/laymen
Do you have a stock nandroid backup ?
no
Mr Hofs said:
Do you have a stock nandroid backup ?
Click to expand...
Click to collapse
Sorry dude, I just have the nandroid backup for my current rom,( viper x 2.7 based on 4.0.4)
Could you please tell me how do I get to jellybean or aokp based on jellybean?
I need your main version . Perform this fastboot command
Fastboot getvar version-main
And post the number here please
here
Mr Hofs said:
I need your main version . Perform this fastboot command
Fastboot getvar version-main
And post the number here please
Click to expand...
Click to collapse
Version-main : 1.29.401.7
Just in case, cid htc__001
Cool ! Download this one
http://bugsylawson.com/files/file/1...12-radio-2120413520-release-274900-signedexe/
Make backups of what's really important on the phone. Then boot to the bootloader and relock the bootloader
Fastboot oem lock
Keep the phone in the relocked bootloader and execute the ruu with a right click and select run as administrator
After the ruu you boot the phone and start searching for OTA's in the phones menu. And update to JB !
Then unlock again, flash a custom recovery and flash any rom available in this forum for the hox. Just get a new unlock code !
ok
Mr Hofs said:
Keep the phone in the relocked bootloader and execute the ruu with a right click and select run as administrator
After the ruu you boot the phone and start searching for OTA's in the phones menu. And update to JB !
Then unlock again, flash a custom recovery and flash any rom available in this forum for the hox. Just get a new unlock code !
Click to expand...
Click to collapse
can't seem to find where to perform an OTA from
and umm... what exactly did u mean by get a new unlock code? I already have an unlock code.bin from when i first unlocked the bootloader. would that work or do I have to generate a new unlock code.bin AFTER i have installed JB?
In the OP you say that you lost it. You can use the old one, its not generated on software but on phone ID.
ok
Mr Hofs said:
In the OP you say that you lost it. You can use the old one, its not generated on software but on phone ID.
Click to expand...
Click to collapse
can't find where to perform OTA from? about>software>updates still retains the 4.0.4... a little help? just need to make it JB, as of now,
version : 2.17.401.2
CID: HTC_001
shadh said:
can't find where to perform OTA from... a little help? just need to make it JB, as of now,
version : 2.17.401.2
CID: HTC_001
Click to expand...
Click to collapse
Come on man, explore a little!
Settings > About > Software Update > Check Now
Sent from my HTC One X using xda app-developers app
athulele said:
Come on man, explore a little!
Settings > About > Software Update > Check Now
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
lolll ..... i went there, it downloaded just a small update at first, then i checked in the update settings "any updates" .... then it downloaded a 360 mb update and after restarting , it's still showing 4.0.4
Try again
Edit :
Did the update install complete, was there any sign of a problem during the update ?
no
Finally managed it in the third try, in the third try, the data cable was unhooked....makes no sense but that might have been the problem, or something else. But none of that matters now since I've got jb and have successfully unlocked the bootloader again. Could you suggest me a good cwm? Should I stick to the 5.8 or 6.0 ?
In any cases, I owe you big time...thanks a lot
http://db.tt/YDfPyjjn
This one works fine ....and its the latest
Related
Just popped up on my One X in the UK. Installing now. Looks the same as the other updates (360-odd MB.) At last! Version is 3.16.61.6
Edit - Now installed & feels great. Things I've noticed Orange have done:
- Browser icon changed to previous Orange icon (grrr!)
- Apps now include "Best Deals" (no idea - will disable), HTC Media Link HD (sure it wasn't there before)
Kernel is 3.1.10-g0867ccf
Yes, just got this myself too. There is also a "Lookout Security" app and a "Power Saver" feature. Will try that instead of Juice Defender for a while and see what happens.
OMG i just can't believe it, they said on FB "early new year", and now that suprise
now i have to back to stock and install it
Good news - glad to hear. Thanks.
I can't go back to stock 1.29.061.11 and i don't know why :/ Please share the RUU or ZIP file (is there a way to flash this OTA zip file via stock/custom recovery?).
SeBoLeX said:
I can't go back to stock 1.29.061.11 and i don't know why :/ Please share the RUU or ZIP file (is there a way to flash this OTA zip file via stock/custom recovery?).
Click to expand...
Click to collapse
Have you got the 1.29.061.11 ruu? If so all you have to do is relock your bootloader and then run it. If it won't run while your booted for some reason do it while your in fastboot.
http://www.htcruu.com/?dir=Endeavor
Sent from my HTC One X using Tapatalk 2
Yes, I have this RUU RUU_ENDEAVOR_U_ICS_40_Orange_UK_1.29.061.11_Radio_1.1204.105.14_release_260736_signed. Now i have custom ROM (ARHD 9.7.2) relocked device, stock recovery, hboot 1.12.0000. When I use command "getvar version-main" showes me 2.17.61.3 When I try to install RUU there is an erreo "Error 140: Bootloader version error".
Hi all,
I have a branded Orange HTC One X ORANG001.
I can't find any updates when I check for them and I'm stock, any ideas?
Thanks
FruityTen said:
Hi all,
I have a branded Orange HTC One X ORANG001.
I can't find any updates when I check for them and I'm stock, any ideas?
Thanks
Click to expand...
Click to collapse
I'm at work right now but when I get home I'm planning to flash the RUU and see if I can update to Jelly Bean. will let you know if I have any updates available later.
ghandi500 said:
I'm at work right now but when I get home I'm planning to flash the RUU and see if I can update to Jelly Bean. will let you know if I have any updates available later.
Click to expand...
Click to collapse
Thank you very much kind sir, I was going to try the same so please keep me posted on which RUU you try.
Excited for JB!
SeBoLeX said:
Yes, I have this RUU RUU_ENDEAVOR_U_ICS_40_Orange_UK_1.29.061.11_Radio_1.1204.105.14_release_260736_signed. Now i have custom ROM (ARHD 9.7.2) relocked device, stock recovery, hboot 1.12.0000. When I use command "getvar version-main" showes me 2.17.61.3 When I try to install RUU there is an erreo "Error 140: Bootloader version error".
Click to expand...
Click to collapse
I think u need the 2.17 ruu not the 1.29
I can't find 2.17.61.3 ruu anywhere, but i've got this Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 Can I use it to back to stock?
SeBoLeX said:
I can't find 2.17.61.3 ruu anywhere, but i've got this Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 Can I use it to back to stock?
Click to expand...
Click to collapse
i'm not sure, i'd also like to know... guess we'll have to wait for the clever people to come online... hehe
If that's the case why have t-mobile not released then? Orange is part of EE. bored of the whole process
Sent from my HTC One X using xda app-developers app
Success, Im on stock again
SeBoLeX said:
Success, Im on stock again
Click to expand...
Click to collapse
How did you do it? Did you use Nandroid or RUU?
Has the OTA popped up?
Thanks
Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 then follow instruction and thats it at the end flash stock recovery, relock bootloader. after that small update appear 1,25 MB, restart and now im downloading 300+ MB update 4.1.1
Just ask if you have some questions.
Tell me where and I will upload file OTA_ENDEAVOR_U_JB_45_S_Orange_UK_3.16.61.6-2.17.61.3_release_301586ebnqevgbwdfkb4ee (364 MB)
SeBoLeX said:
Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140 then follow instruction and thats it at the end flash stock recovery, relock bootloader. after that small update appear 1,25 MB, restart and now im downloading 300+ MB update 4.1.1
Just ask if you have some questions.
Tell me where and I will upload the film OTA_ENDEAVOR_U_JB_45_S_Orange_UK_3.16.61.6-2.17.61.3_release_301586ebnqevgbwdfkb4ee (364 MB)
Click to expand...
Click to collapse
From reading the instructions I need to flash Clock WorkMod, then do the Nandroid stuff is that right?
I've already got a relocked bootloader as I did have ARHD.
Could you give me some idiot proof instructions? The ones in that post don't seem to be overly friendly to people who aren't familiar with this. Many thanks
Don't worry it was my first time too
I believe you know how to use te commend line and fastboot commends
1. Unlock your bootloader
2. Flash CWM recovery
3. Download the Nandroid Backup 2.17.61.3 CID ORANG001 from http://forum.xda-developers.com/showthread.php?t=1975140
4. Create folder in sdcard of your HOX (your sdcard\clockworkmod\backup\ put here unpacked nandroid "2012-12-22.14.26.42"
5. Copy boot.img from nandroid folder to fastboot folder in your PC
6. Flash the boot.img
7. Go to CWM and "Backup&Restore" -> "Restore", confirm you want restore it and thats it
8. Now you have only to flash stock recovery and relock bootloader
I hope you can understand my instruction, my english isn't perfect
Thank you for this, I'm gunna give it a go when I get home
HTC ONE X
H-BOOT - 0.94.0000
RADIO-1.204.90.13
System Image Ver - 1.28.163.9
Im stuck in a bootloop....i really need to find the correct ruu for my phone ...except i cant find it...is there any other way i could get my phone to boot properly??
I could only find 1.26.163.2 .....Any idea when the 1.28 ver would surface??
Please help need to fix phone urgent!!!
Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Mr Hofs said:
Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Click to expand...
Click to collapse
My Bootloader is Unlocked ..Im running ARHD 9.2.7
Fastboot getvar version-main i get 1.28.163.9
CID : VODAP203
Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....
Mr Hofs said:
Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....
Click to expand...
Click to collapse
Thnx ...I was able to flash the custom rom again...and it booted properly...but still how can i go back to stock?
Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there
Mr Hofs said:
Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there
Click to expand...
Click to collapse
So is there any way to get a nanodroid backup??
sridheepan said:
So is there any way to get a nanodroid backup??
Click to expand...
Click to collapse
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best
Mr Hofs said:
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best
Click to expand...
Click to collapse
OH..okie..my bad i gues..Thank You Very Much Mr Hofs ...btw is dere any other way i can install jellybean?
Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376
Mr Hofs said:
Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376
Click to expand...
Click to collapse
Yes its supported...so what do i do???just flash the firmware?
You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!
Mr Hofs said:
You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!
Click to expand...
Click to collapse
Oh Okie...thnx ...btw can i use this method : http://www.forum-generationmobiles.net/t63139-rom-zip-stock-operateur ?
Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:
Mr Hofs said:
Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:
Click to expand...
Click to collapse
Oh...lolzz...okie..Thank You
Good luck mate
I found the files on that french website...was able to revert back to stock for JB update!!!....had to flsh the files maunally though but worked like a charm!! Cheers
That's good news mate :thumbup:
Enjoy !!!
CASE CLOSED
Please my htc one x is s-on , HBOOT 0.96 and unlocked i got a virus on my htc so i formatted my sd and now i am stuck on the white screen.
i need to know step by step what to do as i followed many guides and failed to fix it.
Thank you
Unlocked as in running a custom rom, or still on the stock rom ? Please give some more info
So what recovery ?
Stock or custom rom ?
What rom where you using if it is custom ?
Also curious about the virus you had?
webpatrick said:
Also curious about the virus you had?
Click to expand...
Click to collapse
+1 on that, and how it affected the phone in any way !
Mr Hofs said:
Unlocked as in running a custom rom, or still on the stock rom ? Please give some more info
So what recovery ? i am using TWRB recovery
Stock or custom rom ? i was on custom ROM but know everything gone as the Phone is formatted
What rom where you using if it is custom ?
Click to expand...
Click to collapse
I cant Remember
Your help is highly appreciated
Oke then do this fastboot command , we get you a ruu to get back to stock and then you can also update to jellybean
Fastboot getvar version-main
Mr Hofs said:
Oke then do this fastboot command , we get you a ruu to get back to stock and then you can also update to jellybean
Fastboot getvar version-main
Click to expand...
Click to collapse
I did the command then restart the phone but nothing happened
I know it did do nothing ! I need the number that came out
Mr Hofs said:
I know it did do nothing ! I need the number that came out [/QU
ohhhh sorry i am new to this .
the version no is 1.29.415.11
and really much thanks for your help and quick reply
Click to expand...
Click to collapse
Download this file
http://androidfiles.org/ruu/securek...Radio_2.1204.135.20_release_275980_signed.exe
First how is the battery ? Charge it in the recovery if needed. You need at least 30% of power for this !!
1: put the phone in the bootloader and lock the bootloader
Fastboot oem lock
Keep the phone in the bootloader and execute the ruu with admin rights (right click the ruu.exe and select it)
This will flash the phone to stock android 4.0.4 sense 4.1. After this all you go into the settings and check for manual updates, update it to JB !
Thank you it's worked now how to update to jelly bean
Check in the phone
Settings - about - softwareupdates and do manual searching now !
I did the same stupid thing with my HTC One (v. 1.29.651.7) I cant find an RUU to restore. Any suggestions?
Hi i have unrooted my htc one x telecom nz international so i could get official JB update and running stock ICS 4.0.3 but about half way through when the phone is updating, it stops with an error triangle and will not update. I deleted cache and everything, still no luck
Could anyone solve this issue?
Thank you for your help
Can you do
Fastboot getvar version-main
and
Fastboot oem readcid
Post the results back please
Mr Hofs said:
Can you do
Fastboot getvar version-main
and
Fastboot oem readcid
Post the results back please
Click to expand...
Click to collapse
I'm his friend, here's the details of his phone:
Code:
HTC One X internation version
cid: TELNZ001
version-main: 1.26.781.2
hboot: 0.43.0000
Clockworkmod: 5.8.4.0 [Removed Now]
The main question is whether we can actually update it to the official Telecom Jellybean, after rooting and unrooting it?
We tried updating it to Cyanogenmod 10.1 Jellybean before but it didn't work because the hboot version was too low and there was no support for the TELNZ001 cid. We had to download and use someone else's Clockworkmod restore to get the phone to work again (because we forgot to create a backup before trying the new ROM)
Well use this file to go back to full stock
http://bugsylawson.com/index.php/fi...812-radio-112049013-release-251287-signedexe/
Put the phone in the bootloader and relock it.
Fastboot oem lock
After the command you keep the phone in relocked state in the bootloader, then run the ruu with admin rights.
Right click the ruu and select "run as administrator"
This will bring the phone back to full stock and you should be able to update with official ota.
Mr Hofs said:
Well use this file to go back to full stock
http://bugsylawson.com/index.php/fi...812-radio-112049013-release-251287-signedexe/
Put the phone in the bootloader and relock it.
Fastboot oem lock
After the command you keep the phone in relocked state in the bootloader, then run the ruu with admin rights.
Right click the ruu and select "run as administrator"
This will bring the phone back to full stock and you should be able to update with official ota.
Click to expand...
Click to collapse
Okay, downloaded the file and successfully went back to full stock.
Now I have to manually download the jellybean update and because I am behind the university proxy and it does not work on my phone. I had to download the JB update and then transfer it to my phone and then went to recovery mode and then went "Apply update from external storage".
I downloaded the JellyBean update here: http://forum.xda-developers.com/showpost.php?p=37485046&postcount=37
Here's a photo of what I get.
Not going to work, you need to let the phone handle it all the way with the update option
Mr Hofs said:
Not going to work, you need to let the phone handle it all the way with the update option
Click to expand...
Click to collapse
Thank you so much I've updated through wifi option then everything works fine, finally updated to 4.1.1. Can't thank you enough! now i need to root it back again lol
tiwmu246 said:
Thank you so much I've updated through wifi option then everything works fine, finally updated to 4.1.1. Can't thank you enough! now i need to root it back again lol
Click to expand...
Click to collapse
Good !
CASE CLOSED !
Hi guys,
let me fill you in on my situation.
I live in The Netherlands, last year i got my one x.
My service provider is vodafone, current HBOOT version is 1.12 and my CID is VODAP102
At the moment i''m running slim bean 3.1.0 official (android 4.1.2)
I would like to upgrade to a JB ROM but i cant because my HBOOT version is to low.
I followed the instructions from the link below (short version: lock phone, fastboot oem RUU, etc..)
But after locking the phone it wont boot into RUU and it wont flash the new HBOOT version.
I checked and i downloaded the correct HBOOT for my CID.
I followed the steps in the video to the letter but always fails when trying to reboot into RUU and after that to flash the new HBOOT.
https://www.youtube.com/watch?v=fkD3CeSecb8
My best guess would be that the CID that my phone returns to me is not the CID my phone realy has.
Because when i look up the CID it is assosiated with either vodafone UK or vodafone germany not vodafone NL.
Can u help me ?
If you have a backup of stock ICS rom, restore this and lock your phone.
Take the upgrade by OTA and re-unlock your phone with the first code by htc.
p.s. SlimBean works on 1.2x hboot?
Guich said:
If you have a backup of stock ICS rom, restore this and lock your phone.
Take the upgrade by OTA and re-unlock your phone with the first code by htc.
p.s. SlimBean works on 1.2x hboot?
Click to expand...
Click to collapse
i dont have the stock backup anymore.
I searched a backup of ics or the ruu for Jelly, but i don't found nothing.
I hope that someone can post the backup or RUU.
Get the main version
Fastboot getvar version-main
Mr Hofs said:
Get the main version
Fastboot getvar version-main
Click to expand...
Click to collapse
Thanks for your response.
version-main: 2.17.161.4
and my radio is 2.1204.137D1.21
HBOOT: 1.12.000
The same number as this one
http://bugsylawson.com/index.php/fi...-radio-21204137d121-release-280390-signedexe/
Should work. Otherwise we get a nandroid backup
Try the ruu first
Relock the bootloader
Fastboot oem lock
Then run the ruu with admin rights
Right click the ruu and select :
Uitvoeren als administrator (of zoiets)
Mr Hofs said:
The same number as this one
http://bugsylawson.com/index.php/fi...-radio-21204137d121-release-280390-signedexe/
Should work. Otherwise we get a nandroid backup
Try the ruu first
Relock the bootloader
Fastboot oem lock
Then run the ruu with admin rights
Right click the ruu and select :
Uitvoeren als administrator (of zoiets)
Click to expand...
Click to collapse
Thnx, for the quick reply.
to clarify, with "relock the bootloader" you mean Fastboot oem lock right ?
and what is the file linked above, it is over 600 mb bit it isn't an rom ?
dutch_guy90 said:
Thnx, for the quick reply.
to clarify, with "relock the bootloader" you mean Fastboot oem lock right ?
and what is the file linked above, it is over 600 mb bit it isn't an rom ?
Click to expand...
Click to collapse
Correct, its fastboot oem lock
The file is a ruu, it should flash back the stock rom,kernel and recovery back to the phone via a setup menu on the pc. It reads the phone and flashes all for you
Mr Hofs said:
Correct, its fastboot oem lock
The file is a ruu, it should flash back the stock rom,kernel and recovery back to the phone via a setup menu on the pc. It reads the phone and flashes all for you
Click to expand...
Click to collapse
cool il give it a try
do i need to do a nandroid backup ? or just backup sdcard
dutch_guy90 said:
cool il give it a try
do i need to do a nandroid backup ? or just backup sdcard
Click to expand...
Click to collapse
Backups are always good, can't have to many of them
Mr Hofs said:
Backups are always good, can't have to many of them
Click to expand...
Click to collapse
after i have instalt the RUU and whent through the whole proces what should i do ?
Reboot
Mr Hofs said:
Reboot
Click to expand...
Click to collapse
ok that worked, what shoudl i do now ?
Search for updates
Mr Hofs said:
Search for updates
Click to expand...
Click to collapse
sorry for the late response, i have been away for a few days.
Thanks for your help it worked perfectly, i'm on Hboot 1.36 now