Develop Bugs

[Q] Vodafone France ruu

HTC ONE X
H-BOOT - 0.94.0000
RADIO-1.204.90.13
System Image Ver - 1.28.163.9
Im stuck in a bootloop....i really need to find the correct ruu for my phone ...except i cant find it...is there any other way i could get my phone to boot properly??
I could only find 1.26.163.2 .....Any idea when the 1.28 ver would surface??
Please help need to fix phone urgent!!!

Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid

Mr Hofs said:
Is the bootloader unlocked, are u running a custom rom ?
What are the results If you do these 2 fastboot commands
Fastboot getvar version-main
and
Fastboot oem readcid
Click to expand...
Click to collapse
My Bootloader is Unlocked ..Im running ARHD 9.2.7
Fastboot getvar version-main i get 1.28.163.9
CID : VODAP203

Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....

Mr Hofs said:
Hmm i think you are stuck to a custom rom for a while until there is a matching nandroid or ruu available, i don't see them......but you say the phone is bootlooping ?
What has been changed ?
You can get into the bootloader ? If yes , you can flash the boot.img file from the rom again and you can flash the rom itself again .....
Click to expand...
Click to collapse
Thnx ...I was able to flash the custom rom again...and it booted properly...but still how can i go back to stock?

Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there

Mr Hofs said:
Well basically you need to find a ruu that matches the main version number, you need one exactly like that one starting with 1.28 or 1.29 or 3.14 then you can return to stock.....
Or you need a nandroid backup matching the cid and main version
I checked htcruu.com but there is no ruu for you, only one with a lower version number (but you can't use that one because downgrading is not possible)
Maybe there is one available on the file factory but i don't have an account there
Click to expand...
Click to collapse
So is there any way to get a nanodroid backup??

sridheepan said:
So is there any way to get a nanodroid backup??
Click to expand...
Click to collapse
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best

Mr Hofs said:
Well you should have made one right after you installed the custom recovery, what you can do is make a request in the nandroid backup thread by matt95 in the general section and hope for the best
Click to expand...
Click to collapse
OH..okie..my bad i gues..Thank You Very Much Mr Hofs ...btw is dere any other way i can install jellybean?

Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376

Mr Hofs said:
Actually yes there is a way, check this thread and read the OP and see if your CID is supported for the firmware update
http://forum.xda-developers.com/showthread.php?t=1957376
Click to expand...
Click to collapse
Yes its supported...so what do i do???just flash the firmware?

You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!

Mr Hofs said:
You have to read the instructions how to, i have never done this method so i know as much as you do about it
But yes you have to do some reboot locking and flashing procedures, that's all i know about it
But backup the sdcard before you start doing the updating because locking and Re-unlocking wipes everything !!!
Click to expand...
Click to collapse
Oh Okie...thnx ...btw can i use this method : http://www.forum-generationmobiles.net/t63139-rom-zip-stock-operateur ?

Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:

Mr Hofs said:
Lol i don't understand any French
Maybe this tool comes in handy
http://forum.xda-developers.com/showthread.php?t=1924003
:thumbup:
Click to expand...
Click to collapse
Oh...lolzz...okie..Thank You

Good luck mate

I found the files on that french website...was able to revert back to stock for JB update!!!....had to flsh the files maunally though but worked like a charm!! Cheers

That's good news mate :thumbup:
Enjoy !!!
CASE CLOSED

Updating HBOOT & JB

Right basically i have a HOX and i want CM 10.1 on it! I have already rooted it with CWM recovery and still running the stock ICS 4.04, my HBOOT is version 1.12 and my CID is HTC__001. I have read that you need at least HBOOT version 1.31 to flash any JB rom but ive also read that once you flash the ROM you have to flash the BOOT.IMG after and it will work?? Help please!
and i keep seeing people refering to fastboot commands, i have fastboot files but not entirely sure how they work?? any help much appreciated

Did you alter the stock rom ..... Removed any system apps or something like that . Otherwise flashing back the stock recovery might be enough to update to JB

Ok so i guess being on HBOOT 1.12 doesnt matter, but i dont get how to flash the BOOT.IMG after flashing the ROM using fastboot. I dont want to go into it not knowing what im doing :laugh:

Mr Hofs said:
Did you alter the stock rom ..... Removed any system apps or something like that . Otherwise flashing back the stock recovery might be enough to update to JB
Click to expand...
Click to collapse
Yeah i deleted lots of bloatware and general crap i wont use. That was 1 thought i had if i updated the official firmware it would also update the hboot but didnt think it would be possible after rooting. If you hadnt guessed im a bit of a noob to this :laugh:

Edit : oke flashing the stock recovery won't work. You have to choices
1 flash a standalone firmware to lift your hboot
2 run the matching ruu to install the phone back to stock and then update to JB

Mr Hofs said:
You are now on stock rom , android 4.0.4 .... I guess when you flash back the stock 2.17 recovery back you can update with the official ota from HTC
Click to expand...
Click to collapse
You guess or know? No offence but i dont want my phone ending up bricked lol.

I'm the last guy to brick your phone !
What is your exact software number
Its probably
2.17.401.**
Can you confirm that ?

Mr Hofs said:
I'm the last guy to brick your phone !
What is your exact software number
Its probably
2.17.401.**
Can you confirm that ?
Click to expand...
Click to collapse
Sorry, i always get paranoid when doing stuff like this haha but yes that's it

Now i assume your bootloader is still unlocked ?
First you Google for the ANDROID SDK PACKAGE. Download it and unpack it, check in the package for a folder named PLATFORM TOOLS, in there you see a file named FASTBOOT.EXE
In that folder you open a command window and type there (with the phone in the bootloader)
Fastboot devices
When a serial comes out you are good to go !
This file will bring the phone back to stock. back up what you need ....also the sdcard !!!
http://androidfiles.org/ruu/securek...Radio_2.1204.135.20_release_274900_signed.exe
Download that file, put the phone in the bootloader and lock the bootloader with a fastboot command
Fastboot oem lock
The bootloader will restart with a warning sign, that's oke
Then keep it in the bootloader and execute the ruu from the pc with administrator rights.
Follow the program !

Ok thanks but i need help with these fastboot commands where do i do this from pc or phone? And how
Oh wait nevermind it looks like i completely ignored most of your post lol

If you have 1.5 hours i can help on teamviewer ? If you want !

Thanks mate ill give it a go myself if i get stuck anywhere i shall write on here

Sure mate ! Good luck ... Check for the collection of firmwares ....ready to flash :thumbup:

Mr Hofs said:
In that folder you open a command window and type there
Click to expand...
Click to collapse
How do i do this? If i double click fastboot.exe i see CMD open and close real quick?

The trick is to open a command window inside that folder where the fastboot file is. Usually done by holding shift and right click in that folder - open command window here
There you need to type the commands. (Its in a dos commando window)

Ahhhh okay thanks i didnt know how to open it in a specific folder cheers will give it a go in the morning :good:

Im back to stock downloading the software update now woop woop thank you so much for your help!! I guess once its done i just unlock the bootloader again and can flash CM?

You used the ruu ? Then yes update the phone as much as you can
And yes unlock, flash a custom recovery DO A NANDROID BACKUP ASAP! and then you start flashing roms :thumbup:

Mr Hofs said:
You used the ruu ? Then yes update the phone as much as you can
And yes unlock, flash a custom recovery DO A NANDROID BACKUP ASAP! and then you start flashing roms :thumbup:
Click to expand...
Click to collapse
Yes used the ruu phone went back to how i got it from the shop i did 1 update which finished real quick and now its downloading the main one yes of course haha thanks alot!!

Good then !
Then i say
CASE CLOSED !

[Q] HTC one x corrupted my IMEI and baseband

Hi all,
I m still a noob to android and I was trying to flash viperx jellybean rom on my htc one x international tegra 3 version. But after the flashing I noticed that my IMEI and baseband have been erased. The stupid thing I did was not to take a backup before proceeding. So now my phone cant connect to the network.
Can you please let me know if there is a way to fix this phone?

Reflash the rom and in aroma choise: "venom kernel".
After or before, you have to flash the boot.img that you can found in zip rom...

Guich said:
Reflash the rom and in aroma choise: "venom kernel".
After or before, you have to flash the boot.img that you can found in zip rom...
Click to expand...
Click to collapse
Just to confirm reflash the viperx jellybean rom, after after reflashing in aroma choose venom kernal
after that flash the boot.img ?
thanks much for help.

Now, you have wifi signal and network signal?
If no, this is the problem.
So:
1) Extract boot.img from zip folder and put it (boot.img) into your fastboot folder
2) Make an erase cache: "fastboot erase cache"
3) Flash the boot.img: "fastboot flash boot boot.img"
4) Make another erase cache: "fastboot erase cache"
5) Reboot into recovery
6) Flash the rom with a full wipe and at kernel voice, choise Venom kernel
You can resolve with this procedure

Thanks. I have wifi signal but no cell phone signal since my IMEI is erased. Its unable to connect to network.
I will give it a try right now.
thanks.

Unfortunately this didnt work for me. It still doesnt show the IMEI and baseband info on my phone. Both are unknown.
My kernal version is 3.1.10 if that matters.
Please help.

Which version of rom you've flashed?
And what's you hboot?

i think that one way to retrieve it back is with a ruu, going back to full stock ! can you give the out come of :
fastboot getvar version-main

Mr Hofs said:
i think that one way to retrieve it back is with a ruu, going back to full stock ! can you give the out come of :
fastboot getvar version-main
Click to expand...
Click to collapse
I had the same issue...
And I resolved with a reflash of rom, its' strange that for him didn't work...

Mr Hofs said:
i think that one way to retrieve it back is with a ruu, going back to full stock ! can you give the out come of :
fastboot getvar version-main
Click to expand...
Click to collapse
version-main: 3.14.401.31
Also could you please point me on how to go back to stock ? Can I go to ICS or should I go to JB stock?

well if this does not work....i have no other option....this will bring the phone back to factory state
download this file
http://androidfiles.org/ruu/securek...Radio_5.1204.162.29_release_302015_signed.exe
steps :
1: charge the battery full
2: backup all content you need to keep
3: boot the phone in the bootloader and relock the bootloader
fastboot oem lock (the bootloader reboots with a warning in the bootloader, thats fine. keep the phone there)
4: execute the RUU on the pc with admin rights (right mousebutton -> select : run as administrator)
5: sit back and follow the steps on screen. it takes about 7-10 minutes and your phone is back to factory settings
6: hopefully it works

Guich said:
Which version of rom you've flashed?
And what's you hboot?
Click to expand...
Click to collapse
I flashed venom 3.3.7
hboot is 1.39
my cid is htc__001 is that matters

R: [Q] HTC one x corrupted my IMEI and baseband
spacemango80 said:
I flashed venom 3.3.7
hboot is 1.39
my cid is htc__001 is that matters
Click to expand...
Click to collapse
We have only the cid different, but for me worked my steps
Try with the steps by Mr Hofs
Sent from HOX

thats all good....but the IMEI thing is not ......i say try the above and report back !

Just a question on this process:
Dont I have to flash the boot.img and recovery.img too?

Nope.....all is done by the ruu

Mr Hofs said:
Nope.....all is done by the ruu
Click to expand...
Click to collapse
I belive there is something wrong with my windows box (may be a driver issue)
After I run the RUU it goes as far as "waiting for rebooting the bootloader.."
then it gives up saying the phone is not connected.
Is there any way to run this from MAC?

Mr Hofs said:
Nope.....all is done by the ruu
Click to expand...
Click to collapse
Everything went through fine with RUU and now am back to stock.
However the problem persists. IMEI is still not there and baseband is still unknown. This is really killing me.
Any help is highly appreciated
thanks

Then i can't give you the answer....

R: [Q] HTC one x corrupted my IMEI and baseband
spacemango80 said:
Everything went through fine with RUU and now am back to stock.
However the problem persists. IMEI is still not there and baseband is still unknown. This is really killing me.
Any help is highly appreciated
thanks
Click to expand...
Click to collapse
Before the first flash of viper, did you have unlocked your phone or this was unlocked?
And, this problem appears after the flash of Viper Rom??
Sent from HOX

[Q] Need help my phone gone all glichy

I've tried to update my phone HBOOT from 1.28 to 1.39 and I've used JBFWflasher to do it so I can try using Viper ROM. To cut a long story short I've tried several methods and resorted to flashing it with back to stock but now if looks like it has Viper on it. The phone has gone to being very slow and glichy and I'm stuck with what should I do? .
Can I flash it back to stock again?

What are the steps you have been taken ?
You need to flash the boot.img from the viper rom.zip with fastboot, then make a FULL wipe in the recovery .... not the sdcard ofcourse.
Then install the viper x rom zip.....
Your hboot is updated successfully ?
Give some (or all) info of the steps you did. Including what recovery you are using. Its easier to give proper help

isptim elizabeth
Mr Hofs said:
What are the steps you have been taken ?
You need to flash the boot.img from the viper rom.zip with fastboot, then make a FULL wipe in the recovery .... not the sdcard ofcourse.
Then install the viper x rom zip.....
Your hboot is updated successfully ?
Give some (or all) info of the steps you did. Including what recovery you are using. Its easier to give proper help
Click to expand...
Click to collapse
I've tried Android Revolution HD 20.1 the last few hours still not any better. I've flashed the boot img using jbfwtool21 and then flashed the rom and did a full wipe. Does it have anything to do with the hboot? How do I check?

Check your hboot number in the bootloader. Its number is in there. And what recovery are you on ???

Mr Hofs said:
Check your hboot number in the bootloader. Its number is in there. And what recovery are you on ???
Click to expand...
Click to collapse
hboot is 1.39.0000 recovery is twrp

All should be oke then. Did you try another rom....or maybe its a bad download.

Phone still appears to be acting up even after flashing with another rom. Is there anyway to flash back to stock?

Can you do
Fastboot getvar version-main

Sorry how do i do this? I'm a bit of a noob:laugh:

Ah think I got it, its 3.14.401.31

Oke download this file
http://bugsylawson.com/files/file/1...-r-radio-5120416229-release-302015-signedexe/
Then relock the bootloader
Fastboot oem lock
Then run the ruu with administrator rights....it will flash the phone back to full stock

Or try flashing the rom without the jbfwflasher and just use cmd
A
Viper 3.5.4 xm296

Thank you Mr Hofs followed your instructions and I'm so releived that its now fixed and that I don't have an expensive paperweight
Thank you soooo much!!!
:laugh::good:

Very good mate !
CASE CLOSED !

[Help] Installing AOKP/JB over 4.0.4 ViperX

Hi there,
I am currently old venom rom (2.7.1) based on ICS (4.0.4), I want to switch to Jellybean/AOKP with JB base.
Do I need to go through the whole relocking bootloader, getting CID , flashing update fiasco? because I sort of lost my unlock code.bin file and those seem a little too much work. In any case, I'm very much of a novice, so I'd be extremely grateful to anyone who could tell me the next steps in a bit of details/laymen

Do you have a stock nandroid backup ?

no
Mr Hofs said:
Do you have a stock nandroid backup ?
Click to expand...
Click to collapse
Sorry dude, I just have the nandroid backup for my current rom,( viper x 2.7 based on 4.0.4)
Could you please tell me how do I get to jellybean or aokp based on jellybean?

I need your main version . Perform this fastboot command
Fastboot getvar version-main
And post the number here please

here
Mr Hofs said:
I need your main version . Perform this fastboot command
Fastboot getvar version-main
And post the number here please
Click to expand...
Click to collapse
Version-main : 1.29.401.7
Just in case, cid htc__001

Cool ! Download this one
http://bugsylawson.com/files/file/1...12-radio-2120413520-release-274900-signedexe/
Make backups of what's really important on the phone. Then boot to the bootloader and relock the bootloader
Fastboot oem lock
Keep the phone in the relocked bootloader and execute the ruu with a right click and select run as administrator
After the ruu you boot the phone and start searching for OTA's in the phones menu. And update to JB !
Then unlock again, flash a custom recovery and flash any rom available in this forum for the hox. Just get a new unlock code !

ok
Mr Hofs said:
Keep the phone in the relocked bootloader and execute the ruu with a right click and select run as administrator
After the ruu you boot the phone and start searching for OTA's in the phones menu. And update to JB !
Then unlock again, flash a custom recovery and flash any rom available in this forum for the hox. Just get a new unlock code !
Click to expand...
Click to collapse
can't seem to find where to perform an OTA from
and umm... what exactly did u mean by get a new unlock code? I already have an unlock code.bin from when i first unlocked the bootloader. would that work or do I have to generate a new unlock code.bin AFTER i have installed JB?

In the OP you say that you lost it. You can use the old one, its not generated on software but on phone ID.

ok
Mr Hofs said:
In the OP you say that you lost it. You can use the old one, its not generated on software but on phone ID.
Click to expand...
Click to collapse
can't find where to perform OTA from? about>software>updates still retains the 4.0.4... a little help? just need to make it JB, as of now,
version : 2.17.401.2
CID: HTC_001

shadh said:
can't find where to perform OTA from... a little help? just need to make it JB, as of now,
version : 2.17.401.2
CID: HTC_001
Click to expand...
Click to collapse
Come on man, explore a little!
Settings > About > Software Update > Check Now
Sent from my HTC One X using xda app-developers app

athulele said:
Come on man, explore a little!
Settings > About > Software Update > Check Now
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
lolll ..... i went there, it downloaded just a small update at first, then i checked in the update settings "any updates" .... then it downloaded a 360 mb update and after restarting , it's still showing 4.0.4

Try again
Edit :
Did the update install complete, was there any sign of a problem during the update ?

no
Finally managed it in the third try, in the third try, the data cable was unhooked....makes no sense but that might have been the problem, or something else. But none of that matters now since I've got jb and have successfully unlocked the bootloader again. Could you suggest me a good cwm? Should I stick to the 5.8 or 6.0 ?
In any cases, I owe you big time...thanks a lot

http://db.tt/YDfPyjjn
This one works fine ....and its the latest