Develop Bugs

[Q] Noob here. Is installing Cyanogenmod 10 on my SGH-i747M with Rogers safe?

Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin

Flash a newer recovery prior to flashing CM10.
EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
Sent from my SGH-I747M using xda premium

such as
SaneinOne said:
Flash a newer recovery prior to flashing CM10.
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Such as...

EdwinForTheWin said:
Hello.
I have a GS3 SGH-I747M on rogers. The last one I was trying to get Cyanogenmod 10 on kept getting (Status 7) error. Nothing screwed up at all, until I attempted to unlock the boot loader with some stupid app that said it was safe wit my phone. I finally got a new one, found a solution to my issue (I have to use a different version of clockworkmod) and was wondering if it is safe to do. I mean no chance of risk if I follow instructions (no bricks, etc).
TL;DR: I have an SGH-i747M on rogers and want to out cyanogenmod 10 on with no chance of brick. Could you give me instructions on how to, or tell me if it is safe/unsafe?
Thanks a lot,
Edwin
Click to expand...
Click to collapse
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.

okay
GlassRaven said:
I suggest that you take a look at these first before trying to root your phone:
http://forum.xda-developers.com/showthread.php?t=1739426
http://forum.xda-developers.com/showthread.php?t=1725839
Second, I have Cyanogenmod 10 and I can say that it's playing safe so far - the only disadvantages that you would have are: Samsung's gestures are not functional and CM10 is kinda unstable for games and apps. I also experienced the Status 7 error and from experience, it's caused by using an 'old' version of CWM Recovery. Download the latest one from here (Samsung Galaxy S3 AT&T): http://www.clockworkmod.com/rommanager and download the Cyanogenmod 10 M2 from the CM site.
Assuming that you know how to setup the custom recovery for your phone, delete the current recovery.img on your phone and replace it with the new one that you downloaded. Then just do what you did to setup your custom recovery. I also suggest that you follow the ROM flashing guide on this page: http://wiki.cyanogenmod.com/wiki/Samsung_Galaxy_S_III:_Full_Update_Guide as it is what I followed to ensure that a brick wouldn't happen on my phone. Just a reminder, also wipe the Dalvik cache just to be sure.
TL;DR Flashing and rooting is safe as long as you're patient and you thoroughly follow guides on rooting/flashing your phone.
Click to expand...
Click to collapse
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?

EdwinForTheWin said:
Thanks for the response, do you recommend that I flash another ROM before flashing cyanogenmod 10?
Click to expand...
Click to collapse
I don't really recommend that as that could cause unwanted trouble. From my experience, I just followed the rooting guide that I posted, flash a custom recovery, and flashed the Cyanogenmod 10. Another tip, if you don't want to lose your contacts, make a backup of it before flashing a ROM. Preferrably you write them in a paper so it would be easier. If you have important messages, use an SMS/MMS backup tool to save them. As for applications, make a list of applications that you consider are essential for you so you could just redownload them. Starting out in a custom ROM is really hard at first but you'll get used to it.

Its safety is directly proportional to your ability to follow directions.

Your first mistake was you used the app to unlock the VERIZON S3 bootloader.
All other versions of the GS 3 have unlocked bootloaders.
You should definitely do some more research before you attempt root and custom recovery.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Can you just use ROM Manager after rooting and flashing the stock ROM to download CWM, then CM10? And is the CM10 you're using on your Rogers phone compatible? I don't see a Rogers version on the CM site. Did you use the AT&T one?

Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att

tonymtl said:
Yes for the ROM manager, but the free version doesn't install latest touch recovery. The at&t version is compatible with all Canadian i747m. You can get the latest version here: http://get.cm/?device=d2att
Click to expand...
Click to collapse
What does touch recovery do? And do I have to use that link to flash it, or can I use ROM Manager? And if I were to use that link, I would DL the zip, boot my phone into download mode, plug in, open Odin, make sure auto reboot and F reset time are checked, load the .tar into the PDA, and click start? What happens to the previous ROM that was there?
And when I first root my phone, and load the stock rom, do all of my apps remain? I haven't rooted yet, for my Rogers phone.

A touch recovery lets you touch the screen as apposed to using the volume rocker.
You will keep all your data.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Thanks for the help! Another question, if I would like to unroot my phone, and decrease the flash counter, is there a thread I should see for the I747MVLLH1? I know about triangle away, but Rogers/my model isn't supported for that.

Triangle away does support Rogers gs3

Thanks! So should I flash CM10 through ROM Manager, or through the link that was posted? I'm not exactly clear on how to flash the ROM through the link though. Does flashing a new ROM erase the previous ROM? And 'wiping cache' doesn't wipe your data/apps right, only 'wipe Data and Cache'? And I don't really need to bother with kernels too right?

If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.

tonymtl said:
If you going from stock to cm10 wipe everything: cash, data, dalvik cash. Don't flash kernels unless you want to overclock and undervolt, cm10 comes with kernel and I get pretty good battery life with it. You can flash from ROM manager, and yes it will erase your previous ROM, so do a backup before flashing.
Click to expand...
Click to collapse
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?

Yes it will ask you if you want to wipe, if you download cm10 ROM from ROM manager it will ask you if you want the latest gapps. You can get ROM toolbox or titanium backup to backup your apps and restore them after flashing rom. Backup is just in case but you can always flash stock ROM later if anything goes wrong.

ily112 said:
And when I flash it through ROM Manager, it would give me the option to wipe everything right?
The backup that I would do through ROM Manager, thats just incase anything goes wrong right? It's not to get back my apps once I flash from stock to CM10? Other than manually installing them after flash, is there any way to quickly get back my apps/files?
And does the CM10 flash from ROM Manager include the GAPPS file?
Click to expand...
Click to collapse
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.

s0ulja said:
You should probably flash through your cwm recovery instead of ROM Manager, but yea you can do a backup in recovery or ROM Manager, and I recommend Titanium backup it's easy to use and free.
Click to expand...
Click to collapse
How exactly would I flash through cwm recovery?

[Q] Error 7 with ROMs

I keep getting update failed, error 7 and such with every ROM i try on my phone. Is there a reason for this, i clean cache. davlik, wipe factory, i do everything that is asked, but nope always get update failed.... Running on Rogers

Cholerabob said:
I keep getting update failed, error 7 and such with every ROM i try on my phone. Is there a reason for this, i clean cache. davlik, wipe factory, i do everything that is asked, but nope always get update failed.... Running on Rogers
Click to expand...
Click to collapse
Get the latest version of your recovery (CWM or TWRP). If you still get it, make sure you have the up-to-date bootloaders.
TWRP = GooManager
CWM = ROM Manager

BWolf56 said:
Get the latest version of your recovery (CWM or TWRP). If you still get it, make sure you have the up-to-date bootloaders.
TWRP = GooManager
CWM = ROM Manager
Click to expand...
Click to collapse
Running on rogers he'll also have to flash a d2att recovery not the d2can or it won't work still even after doing that.
Sent from my SGH-I747 using xda app-developers app

KorGuy123 said:
Running on rogers he'll also have to flash a d2att recovery not the d2can or it won't work still even after doing that.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
If on cwm
Yay for twrp!

same problem
looks like I am having the same problem. I have been running liquid smooth since RC5 and my latest is the 4.2.2 version rom 2.3.
this problem began with attempting to flash the 2.4 version and persists with the 2.7 and 2.8.
so please talk me through the latest CWM and is this something I need to flash with odin?
thank you.

Hummm I installed TWRP . but get the same thing when trying a rom.
Note to others switching to TWRP from CWM don't foget to do a backup before doing anything in TWRP, since the CMW backups you had before won't show up in it....
UPDATE: It worked ! Was able to instal new CWM with this method http://forum.xda-developers.com/showthread.php?t=2170635 and ROM installed flawlessly after, WOohoo

[Q] Wind SGH-T999V CM Help

Okay, I'm new to Android and I heard this is the go-to spot for help. Anyway, this is what happened to my Wind SGH-T999V. Mind you i'm VERY new to this rooting thing
I rooted my S3 by using TWRP 2.6.3.0 and i used odin3 v1.85 and it worked. I downloaded a root checker and it said i'm rooted. Then i put CM 10.1.2 on my sd card and wanted to install it via TWRP recovery but it gave me an error that said "No MD5 filed found" or something along those line.
I then tried to use different versions of twrp ( twrp 2.6.1.0) and a different CM (10.1.1) but i still got the same "no Md5 found" error. So, a friend then told me to ditch twrp all-together and download CWM instead. So, I download recovery clockwork touch 6.0.3.7 and put it on my phone.
THEN, i tried to go back to the recovery boot place, but after that small blue font saying "recovery boot", my phone goes black. I dont see the old twrp recovery or the clockwork one.
I just really want to have Cyanogenmod on my phone, i've been having a hard time. Help please?

Just disable the md5 check, most or the ROM files are not going to include a hash file, but will flash fine. TWRP or CWM will error out if the flash fails.
Also, it sounds like your recovery install failed, just reinstall using ODIN and a file from @DocHoliday77 (I recommend TWRP over CWM, but it is just preference)

It's already unchecked.

Install TWRP and try again, should work without issue. Also, redownload the ROM file, preferably the latest version, 10.1.3RC2 (I think)
Sent from my T-Mobile T999L using TapaTalk 4 and delivered by Planet Express.

Can you link me the most STABLE CM that works with my Wind SGh-T999V?

qasde455 said:
Can you link me the most STABLE CM that works with my Wind SGh-T999V?
Click to expand...
Click to collapse
Don't use RC2. If you want stable, use 10.1.2. get.cm, filter it for your device. I think Doc also has them in his signature.

http://get.cm/?device=d2tmo&type=stable
"Stable" is relative, the RCs are just as good.

Aerowinder said:
Don't use RC2. If you want stable, use 10.1.2. get.cm, filter it for your device. I think Doc also has them in his signature.
Click to expand...
Click to collapse
I have cm 10.1.2 downloaded but like i said, it\s not installing for me. I used multiple recovery's and atm i'm using twrp 2.2.2.0 and it's not installing either.
EDIT: I'm getting a status 7 error when I try to install it via twrp install

qasde455 said:
I have cm 10.1.2 downloaded but like i said, it\s not installing for me. I used multiple recovery's and atm i'm using twrp 2.2.2.0 and it's not installing either.
EDIT: I'm getting a status 7 error when I try to install it via twrp install
Click to expand...
Click to collapse
You need to edit the install script because your device isn't supported. Or you can download Doc's version.

Actually I'm pretty sure cm includes the T999V, but I'm betting the firmware needs to be updated.
Look in Aerowinders Sig for the links to the firmware. In that OP you should find a link to the thread with the T999V firmware.
Or, you can go to my T999L thread and get the Rom there. But w/o updated firmware it may be buggy.
Sent from my SCH-I535 using Tapatalk 4

It's already unchecked.

qasde455 said:
I have cm 10.1.2 downloaded but like i said, it\s not installing for me. I used multiple recovery's and atm i'm using twrp 2.2.2.0 and it's not installing either.
EDIT: I'm getting a status 7 error when I try to install it via twrp install
Click to expand...
Click to collapse
CM10.1.3 is now Stable and will be the last 4.2.2 build. It should has the all of the Asserts, including the MB7 one. Also, update your TWRP, the current is 2.6.3.0.

I want to install CM so bad but after reading lot of threads n comments, I am scared. there are many terms used, i even dont know like flash kernel, OTI, radio etc... i just know about rooting, recovery and ROM... so i have decided to install PAC man instaed its a combination of couple roms and is most successful and stable..

malibu.barbie said:
I want to install CM so bad but after reading lot of threads n comments, I am scared. there are many terms used, i even dont know like flash kernel, OTI, radio etc... i just know about rooting, recovery and ROM... so i have decided to install PAC man instaed its a combination of couple roms and is most successful and stable..
Click to expand...
Click to collapse
You should read the sticky threads, and use xdas search for terms or definitions anytime you run into stuff you aren't familiar with.
Sent from my SGH-T999V using Tapatalk 4

[Q] Can't install new ROMs

So I'm currently running Cyanogenmod version 10.2.0 .. Android 4.3.1.
I've updated to the newest version of TWRP.
I factory wipe, then try to install a different ROM.. for example I've tried PA & AOKP.
Every time I try this it fails within 1 second and I have to restore a backup and go back to Cyanogenmod.
EDIT: I have a T-Mobile Galaxy S3
I have attached an image of when I get an error when I try to flash.
UPDATE:
Alright so I was able to get past that error by going into advanced wipe and selecting "System". Now when I flash I get a new error. I am attaching a new picture.

You need to give more info on the error
Sent from my SGH-M919 using Tapatalk

serio22 said:
You need to give more info on the error
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
I'm at work now. I'll post and update with the error later.

Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app

spartan268 said:
Do you have a t-mobile s3? If you are from a different carrier such as wind mobile I could know the problem. I also had a problem flashing 4.3 Roms with my t999v wind s3.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Mine is T-Mobile. I'm still at work til 2AM EST. I'll probably post my error tomorrow.

Alright guys, I attached a screenshot (picture lol) of my phone and the error I am getting when I try to flash different ROMs. Any help?

Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.

Shallwhat said:
Alright guys.. I was able to get past that other error but now I have a new one when trying to install a new ROM.
Here is a screenshot of the error.
Click to expand...
Click to collapse
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.

Noobiologist said:
Update your recovery. You're using TWRP 2.5.5.0 when the latest one is 2.6.3.1. If you can't boot into Android, Odin the TWRP recovery. Also, make sure you completely wipe your internal storage before flashing a custom ROM. If that custom ROM isn't working for you, try another one to see if that flashes since that would indicate that the custom ROM you're trying to flash could potentially be a bad download.
You also need to post more information about your phone.
Which custom ROM are you using?
Which kernel are you using or trying to use?
etc etc.
Click to expand...
Click to collapse
I've tried flashing multiple ROMS.. Slimbeam.. AOKP.. ParanoidAndroid.. I've downloaded from GOOManager and I've also downloaded from external links and put on my external SD card. Nothing works. Like I said in the OP I am running Cyanogenmod 10.2.. Android 4.3.1. I'm using the Ktweaker kernel.
I updated my TWRP from Goomanager and it only updated to 2.5.5.0. How do I get it to update to 2.6.3.1?

So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.

Same problem happened to me last night, I tried to install the modem again but the same error keep coming up.

To everyone with issues updating recovery. Goo has a openrecovery script issue. Your best bet is to flash latest Recovery using Odin. You may choose to use Mobile Odin if you feel like it.

Can't restore anything except Kitkat
I keep getting the same error, except I can't flash or restore any rom that isn't kitkat (all the kitkat roms are buggy so i want 4.3 back). I reflashed twrp 2.6.3.1 with odin but its still not letting me flash anything.
Also if it helps I can't copy anything from the internal SD to the external SD using twrp file manager.

Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3

I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?

Nothing will flash except Kitkat
Perseus71 said:
Older Rom's backups can't be restored due to file system changes. You will have to wipe everything and flash fresh if you want 4.3
Click to expand...
Click to collapse
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something

Shallwhat said:
So I just went to update TWRP from goomanager again and when it went to download it failed because "invaid MD5 sum".
Edit: So I tried updating again and it said it was successful. I rebooted into recovery and it still says 2.5.0.0
I'm lost.
Click to expand...
Click to collapse
Did odin flash of the most current recovery take care of your issue?
Hastily spouted for your befuddlement

GodLik3 said:
I tried the latest version of TWRP, and I'm on StockROM by TeamInferno. I got V7 and I saw an update on it last night (V8) so I downloaded it and tried to install it fom Clockworkmod recovery and it didn't work so I tried TWRP and the same thing happened. Do I have to wipe everything to update my ROM?
Click to expand...
Click to collapse
What was the specific error message when flashing ?
QuatroQuatro said:
Ive tried that multiple times. once the Odin flashable tw 4.3 downloads, I'm going to try that but I can't flash any fresh roms using twrp except 4.4 (Jellybam to be specific).
I tried Stockorama 4.3 tw, but it would just reboot after getting past the "samsung galaxy sIII" screen (tried insecure kernal too). I'm wondering if I'm in a weird soft brick or something
Click to expand...
Click to collapse
What is your TWRP Version ? Also what is your Bootloader version ? (No its not the baseband)

My bootloader is T999UVUEMJC
My baseband is uvuemjc
TWRP is version 2.6.3.1 (I've also tried 2.6.3.0)
I think it got updated bootloader/baseband when I odin flashed stock tw 4.3 (the only jellybean ROM that works)
I also made a backup of my 4.4, but it wouldn't let me restore even that.

You have been talking about 2 different things.
1. Flash a New Rom - Either Touchwiz or AOSP. $.3 or newer.
2. Restore a Rom - I think you are talking about a Nandroid Restore.
If you are referring to Point 1 as "Restore Rom" then you need to change terminology in order to help us understand your problem correctly. Re-Flashing a rom that you used to have is still Flashing not "Restore".
With that UVUEMJC Bootloader, you can completely forget about flashing previous Touchwiz Firmwares such as UVDMD5 or UVDLJC. If you tried them, you WILL brick your phone. If you tried Custom Touchwiz Roms based on those 2 firmwares, it may or may not work.
Now if you are trying to flash a AOSP Rom, either 4.3 or Kitkat 4.4, and you do have latest TWRP, (2.6.3.1), please specify the error message in detail.
You must do Factory Reset and Wipe Dalvik + Cache in the Recovery before flashing the AOSP Roms.

[Q] Clockwork Mod and TWRP not working

Hey folks,
I have tried this with 2 GS 3's, and I have even tried multiple different versions of twrp just to make sure, and I still have the same issue. I flashed Clockwork Mod and twrp using Flashify and Odin, however when I actually go to make Nandroid back up, or flash anything, I get the "can't mount" messages from CWM and an empty folder from twrp. I have attached pictures to show the issue. As I said, I tried multiple methods, and multiple versions, on 2 separate devices, yet came to the same end. Does anyone know anything about this?

Really? No one? lol

ok , just throwing this out there... are you using latest twrp , what about the 'fix permissions' option , tried installing via fastboot from laptop (?). sorry dont have more. still newb-ish myself.
last screenshot says 'no OS' , you have no ROM on your phone(?).
also , are some knowledgeable folks on this thread...
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"

mrrocketdog said:
ok , just throwing this out there... are you using latest twrp , what about the 'fix permissions' option , tried installing via fastboot from laptop (?). sorry dont have more. still newb-ish myself.
last screenshot says 'no OS' , you have no ROM on your phone(?).
also , are some knowledgeable folks on this thread...
http://forum.xda-developers.com/showthread.php?t=2257421
"all i can really do , is stay out of my own way and let the will of heaven be done"
Click to expand...
Click to collapse
If by fast boot you mean use Odin in my laptop, then Yessir I did. Both with clockwork mod and twrp. Everything downloads and installs fine. It's the actual functionality that is dysfunctional. It says I have no os, but I do have my stock Rom on there and it boots just fine. Thank you so much for actually responding, it means a lot. I'll look into the that and hopefully find some info
Sent from my LG-D852 using XDA Free mobile app

fastboot is run from your computer while phone is plugged into it. very very useful. here's a guide if interested or do a google search.
http://forum.xda-developers.com/showthread.php?t=2225405
"all i can really do , is stay out of my own way and let the will of heaven be done"

Do you have the i747m or i747? If you have the i747m, try re-flashing a completely stock ROM from sammobile.com.

audit13 said:
Do you have the i747m or i747? If you have the i747m, try re-flashing a completely stock ROM from sammobile.com.
Click to expand...
Click to collapse
I have the i747M. A completely stock rom? As in a Samsung stock rom? Would I go about doing it the same way as any other rom? Because my recoveries aren't working so I'm not able to do a Nandroid back up. As such I'd rather not do anything until I am able to do a Nandroid back up.

You're installing the latest recoveries for the d2lte, right?

audit13 said:
Do you have the i747m or i747? If you have the i747m, try re-flashing a completely stock ROM from sammobile.com.
Click to expand...
Click to collapse
audit13 said:
You're installing the latest recoveries for the d2lte, right?
Click to expand...
Click to collapse
d2lte? I don't understand, could you elaborate further?

The only recovery that works for the i747m is made for the d2lte. I think you maybe be flashing the wrong recovery.

audit13 said:
The only recovery that works for the i747m is made for the d2lte. I think you maybe be flashing the wrong recovery.
Click to expand...
Click to collapse
Ooooooooook then. Would you be kind enough to direct me to the right place?

What have you been flashing?
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/

audit13 said:
What have you been flashing?
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2lte/
Click to expand...
Click to collapse
I downloaded CWM and TWRP from a couple pages online. I'll try finding their links.
Is this link the correct version of CWM?

That is the correct link.

audit13 said:
That is the correct link.
Click to expand...
Click to collapse
You, sir, are a God send. Thank you. But I must ask, even within the i747m there are different versions? Why?
Sent from my LG-D852 using XDA Free mobile app

All s3 phones sold in Canada are identical hardware-wise. It's only the carrier customizations that make them appear to be different.
You can flash a stock Rogers 4.4.2 over a stock Telus 4.4.2 with no problems. In fact, I have done it myself.
Prior to unified ROM and recovery builds for the s3, the AT&T s3 was referred to as the d2att while the Bell/Rogers/Telus s3 was referred to as the d2can. With unified builds, they are collectively referred to as d2lte. The only two things that are not interchangeable between the i747 and i747m are the modems and bootloaders.

Installing GS3 Rogers...but not really
Hello,
I tried to use the CM installer app/windows install which appeared to work but upon a first reboot a couple of questions pop up asking about if I want root and that the ROM might request a stock recovery. I answered these questions 7 ways to Sunday but it will not boot to CM. I can get in to the recovery screen but that is about it.
Something wrong?
thanks,

If you are stuck at the CM boot logo, try wiping cache, dalvik, and data in recovery?

audit13 said:
If you are stuck at the CM boot logo, try wiping cache, dalvik, and data in recovery?
Click to expand...
Click to collapse
Hi
I'm not stuck at the CM logo, in fact it just boots in to the stock Rogers environment. I can get in to the recovery menu but all I have is
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
I wiped the cache...no improvement.

I recommend you not use the CM install app as it can be hit and miss for some phones.
Before flashing anything, I recommend you verify the bootloader on your phone and post the version here.