Related
All modems (radio / baseband) here are for the T-Mobile M919 I9505 variant only!!
i've seen quite a few people around the threads looking for just modems so figured i'd share. i'll try to keep the thread up to date as our new firmwares release. i'll look into making CWM for those that may want it to be flashable but for now
please follow these instructions
with Odin:
Extract the contents of 7zip/zip archive. Put it in your Odin folder. Do not try to extract files from the .tar.md5.
Run Odin 3.07.exe, and prepare Odin:
1. Check "auto-reboot", and uncheck all other options.
2. Click Phone and select the TAR.md5 you downloaded. Leave other fields empty.
3. Don't panic. Odin may freeze while it checks the MD5 signature of the TAR. This is normal.
* Put your device into Download Mode:
5. Power down fully and disconnect the USB cable.
6. Hold Volume Down + Home + Power.
7. You should now be at Download Mode. Connect your device and wait for it to be recognized.
8. Click Start in Odin.
9. Wait!
10. Device will auto reboot
UVUAMDL Baseband - 05.07.2013
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Can someone make is twrp flashable?
Lolento said:
Can someone make is twrp flashable?
Click to expand...
Click to collapse
it's a two part file so i'm not sure that's possible yet. i'll have to look into it tmw when i have time. if anyone else knows how to, i'll def add it to the OP.
xXchrizhurtyXx said:
This should be stickied
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ditto!
Sent from my Nexus 7 using xda premium
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Pinan said:
Thank you mrvirginia. I just did this and it worked just fine.
Wicked ROM v1
Click to expand...
Click to collapse
np :silly:
It'll be awesome if it can be flashed through TWRP or CWM.
With this (and possibly a kernel flash), we can now run any on the international i9505 ROMs, right?
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
mrvirginia said:
np
Click to expand...
Click to collapse
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Same
xXchrizhurtyXx said:
I've tried to Odin mdl but it stays at mdb
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
BDHela said:
Same
Click to expand...
Click to collapse
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
Pinan said:
Can we get the MDB radio as well? Would be good to have to experiment with. I found some dead areas, that I did not notice were dead before I changed to MDL.
Click to expand...
Click to collapse
if you can pull it. i don't have those files on hand. i may get them tmw.
mrvirginia said:
make sure you are selecting Phone and not PDA. confirmed working by numerous people.
if you can pull it. i don't have those files on hand. i may get them tmw.
Click to expand...
Click to collapse
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
nitrogen618 said:
Seems like i9505 have the solution to flash through recovery.
http://forum.xda-developers.com/showthread.php?t=2192025
Maybe we would get it soon? ;p
Click to expand...
Click to collapse
this is a one part modem.bin. the Odin file in OP is a two-part modem, modem.bin and NON-HLOS.bin. i'm fairly certain we need both parts and am not sure how that works via CWM. i can make one with both parts flashed to the modem location, but can't guarantee what that would do if anything...
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
not sure what to tell you, mate.
BDHela said:
I did that sir. Still saying MDB in about. Sorry
Running Wicked 2
Click to expand...
Click to collapse
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Orical said:
I did the same, Odin to phone and it says MDB but Odin reported 1 successful and 0 failed. Isn't there two files though?
MD5 checked out so I know all of that is solid it wasn't a bad download, maybe it's a glitch or something.
Click to expand...
Click to collapse
yes, two files but it will always say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
mrvirginia said:
yes, two files but it will stay say 1 successful. says same when you flash an entire stock image which includes quite a few files (imgs).
Click to expand...
Click to collapse
I saw the other file you listed in the scroll report while flashing but it never said it errored at all just listed then completed the reboot, meh maybe it's just one of those things it's hit or miss depending on the device.
I am going to switch my service from att to t mobile. Can I odin, a t mobile stock Rom on the att phone? I want to have wifi calling on it. I believe all the hardware is the same and it should work. I just want to make sure. Thanks in advance.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
I did the opposite. I put a T-Mobile note 2 onto the AT&T network. I asked if I could put an AT&T rom in the T-Mobile phone and I was told it "could" cause compatibility issues. I went ahead and put the matching T-Mobile software in the phone.
Of course you should see what the more experienced folks have to say. I have been curious myself. I've been thinking about trying an AT&T rom in the phone. They did say the hardware is pretty much the same, but that it could cause issues with the factory installed software that remains even after a rom install.
Hopefully we hear from someone soon.
---------- Post added at 08:19 PM ---------- Previous post was at 08:08 PM ----------
I found the post. It was for the SGS III I was playing with, my wife has it now. Hope this helps.
Check this post.
I know I can flash t mobile roms via cwm or twrp. But I want to use odin to change modem and everything. Basically make it a stock t mobile phone. It is for my wife, and stock is fine.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
I have an AT&T Note 2 running T-Mobile stock rom.
You can't flash the T-Mobile radio to the AT&T phone but, mine is working every well with this setup.
Did you flash via recovery? Or Odin?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Micronads said:
Did you flash via recovery? Or Odin?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ODIN. I had to take out parts of the original ROM that I knew would make it fail via ODIN upon install.
Sent from my SGH-T889
tooter1 said:
ODIN. I had to take out parts of the original ROM that I knew would make it fail via ODIN upon install.
Click to expand...
Click to collapse
I know this is an old thread, but how do you do this? I've got an AT&T phone that I would like to load the stock T-Mobile build on. I've got a .md5 file for ODIN. Is it as simple as untar-ing the file, deleting the modem image, then retar-ing it and generating the .md5 file?
An additional complication is that I've enabled all of the radios using a Qualcomm utility.
chris.arney said:
I know this is an old thread, but how do you do this? I've got an AT&T phone that I would like to load the stock T-Mobile build on. I've got a .md5 file for ODIN. Is it as simple as untar-ing the file, deleting the modem image, then retar-ing it and generating the .md5 file?
An additional complication is that I've enabled all of the radios using a Qualcomm utility.
Click to expand...
Click to collapse
I need to look and see if I can remember the files to remove. I know I did a trial and error thing and I can't seem to find my saved stock ROM. I'll keep looking for it though.
I assume it was the modem file, but I don't know for sure. The bigger question I have is how to re-create the ODIN file. I untar-ed a stock T-Mobile image from this thread. I deleted the modem.bin file, and tried to retar it according to the instructions here. I tried flashing it, but it's been "flashing" the boot image for over an hour. I'm about to reboot it, and try something else. Maybe tar-ing up each individual image, and flashing them one at a time? I don't understand why ODIN won't let me flash a .img or .bin file, but it'll allow a .tar that contains a .img or .bin? I'm hoping I haven't bricked it!
chris.arney said:
I know this is an old thread, but how do you do this? I've got an AT&T phone that I would like to load the stock T-Mobile build on. I've got a .md5 file for ODIN. Is it as simple as untar-ing the file, deleting the modem image, then retar-ing it and generating the .md5 file?
An additional complication is that I've enabled all of the radios using a Qualcomm utility.
Click to expand...
Click to collapse
chris.arney said:
I assume it was the modem file, but I don't know for sure. The bigger question I have is how to re-create the ODIN file. I untar-ed a stock T-Mobile image from this thread. I deleted the modem.bin file, and tried to retar it according to the instructions here. I tried flashing it, but it's been "flashing" the boot image for over an hour. I'm about to reboot it, and try something else. Maybe tar-ing up each individual image, and flashing them one at a time? I don't understand why ODIN won't let me flash a .img or .bin file, but it'll allow a .tar that contains a .img or .bin? I'm hoping I haven't bricked it!
Click to expand...
Click to collapse
What happened with the process? I can't seem to find my old file(s) that I flashed, must have deleted it since I haven't had that phone in quite some time.
What I did was, I started to delete files within the ROM like modem, tz, hidden etc. until it fully booted.
Sorry I couldn't be more useful about this. I should have put it in my response thread on how I did flashing process.
I use the Sprint SlimBean ROM and I had no issues with it on my SCH-S960L. I had no issues with my mobile connection except for the fact that it it took some time to connect to mobile data services or even required a restart or Airplane mode toggled. This along with it sometimes did not switch between 3G and LTE when it should. Because of this I attempted to flash a newer Sprint Galaxy S3 modem. This completely disestablished any connection to services. It has 0 bars and cannot make calls, send texts, or use data. I have tried to reflash the ROM but of course, it did not help at all.
Now in the light of hope, I made a backup of the efs and firmware folders before flashing. I'm not sure how I can fix my issue with this but it was suggested to do so before flashing.
My baseband version was S960LWYAMD6. While I could reflash the old modem, (with help) I would prefer a better modem. (if there are any)
Any help is appreciated.
With best regards,
SirBenjamin
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
prboy1969 said:
Well this just may be your day. Apparently chxnugs just posted the Modem for your particular device HERE. I would update PRL / Profile first just to see if that will help. Also have you tried ##72786# ?
Click to expand...
Click to collapse
chxnugs said:
i know this is sprint galaxy s3 section, but the straight talk s3 is basically the same phone and there is no section for it.
if you own this particular model, then you would know that its pure hell trying to find ANY files. this is the stock MD6 modem.bin ripped from my phone. ive seen people ask for this modem because they flashed the MD4 modem in hopes of getting their MSL and/or for the benefits of being able to use the 16-digit password. (which reminds me.. i have read of ways to port the 16-digit password from a .dll file in the phone? i have done loads of searching, but the password is NO WHERE to be found) and needed the stock modem. so for anyone that needs it here it is.
hopefully us ST S3 users will eventually gather up all the odin files to completely restore our phones when needed
Click to expand...
Click to collapse
I tried to flash the file chxnugs provided. I used both Mobile Odin and replaced the modem file in another flashable ZIP. Neither of them worked and I still get 0 bars/unknown baseband.
Honestly I have no idea what to do to fix this but it needs to work.
Again I say, all help is appreciated.
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
chxnugs said:
Oh and just asking.. have you extracted the .bin file from the zip and tried it
Sent from my SCH-S960L using Tapatalk
Click to expand...
Click to collapse
chxnugs said:
ok i extracted a fresh modem.bin straight from my phone. let me know if it works
Click to expand...
Click to collapse
I got the same results. I extracted the .bin but renamed it to NON-HLOS.bin since Mobile Odin would not accept it as modem.bin. Am I flashing this wrong?
Sent from my SCH-S960L using Tapatalk
Did you try any of my other suggestions form post #2 ?
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
prboy19648801865 said:
Did you try any of my other suggestions form post #2 ?
Click to expand...
Click to collapse
chxnugs said:
im sure your trying to flash it under phone section.. i managed to try to make a flashable CWM version. maybe you can try that and let me know if it works
Click to expand...
Click to collapse
Proby, I tried to do the other things you suggested. I can't update the PRL/Profile since I'm on a custom ROM. That is unless there is another way. I did not understand what you meant with the number you mentioned. If you wanted me to call that it did nothing.
As for chx, unfortunately it still did not fix it. This quick little modem update is turning into a nightmare. Not only that, but no sound plays, the microphone does not work, and DSP Manager crashes whenever I try to play media.
I really appreciate both of your support though.
Yay! I used Mobile Odin Pro and flashed a file from another thread. It may have been the file or using Mobile Odin Pro since it downloaded the correct driver. I appreciate all of your help, though.
Sent from my SPH-L710 using Tapatalk
I like the touchwiz UI but i want the added enhancements of custom firmware, i know ill probably get flamed with people saying "search
for asking this, but can you guys recommend a custom touchwiz rom? preferably the most popular/up to date
DN3 if you want a 4.3 Rom
Tweaked if you want a 4.1.2 Rom
Double0EK said:
DN3 if you want a 4.3 Rom
Tweaked if you want a 4.1.2 Rom
Click to expand...
Click to collapse
So DN3 looks great but its a N7105 rom, which apparantly is fine, except that it insists that i flash one of 3 modem options, none of which are for my phone. also i heard that for my phone (t889v), once you flash a modem for the wrong device you cant get the correct modem back again.
The T889v doesnt have a flashable modem available?
nodyarg said:
So DN3 looks great but its a N7105 rom, which apparantly is fine, except that it insists that i flash one of 3 modem options, none of which are for my phone. also i heard that for my phone (t889v), once you flash a modem for the wrong device you cant get the correct modem back again.
Click to expand...
Click to collapse
I would take the dn3 zip and take out the n7105 modem files and replace them with t889v modem files.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
cnote74 said:
I would take the dn3 zip and take out the n7105 modem files and replace them with t889v modem files.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I tried that by replacing the modem.bin files in the rom's folders for the 3 modem versions with the wind 4.3 modem.bin, it took 2 flashes before my phone would start working but still had a no network symbol instead of signal bars. i also tried flashing the wind 4.1.1 modem through recovery after but no luck. i can see that others on the t889 have had success with this rom, so i should be able to use it on a t889v, cant figure out what the problem is.
nodyarg said:
I tried that by replacing the modem.bin files in the rom's folders for the 3 modem versions with the wind 4.3 modem.bin, it took 2 flashes before my phone would start working but still had a no network symbol instead of signal bars. i also tried flashing the wind 4.1.1 modem through recovery after but no luck. i can see that others on the t889 have had success with this rom, so i should be able to use it on a t889v, cant figure out what the problem is.
Click to expand...
Click to collapse
Once the 889V gets the wrong devices modem you will have a tough time getting it out from what I have seen.
Hastily spouted for your befuddlement
Coug76 said:
Once the 889V gets the wrong devices modem you will have a tough time getting it out from what I have seen.
Hastily spouted for your befuddlement
Click to expand...
Click to collapse
I got it working by wiping basically everything except external sd, and incidentally soft bricking my phone, then going into download mode and using odin to flash a factory rom. got signal bars back, so then i reflashed custom recovery and tried flashing dn3 with a new modem again but im not having any luck with it.
nodyarg said:
I got it working by wiping basically everything except external sd, and incidentally soft bricking my phone, then going into download mode and using odin to flash a factory rom. got signal bars back, so then i reflashed custom recovery and tried flashing dn3 with a new modem again but im not having any luck with it.
Click to expand...
Click to collapse
Not having luck with data? Have you set your APNs? Check the obvious stuff first.
Double0EK said:
Not having luck with data? Have you set your APNs? Check the obvious stuff first.
Click to expand...
Click to collapse
Its not data. Its just plain network signal. Instead of seeing bars at the top right ive got a no smoking sign without the cigarette in the middle. Thats what i meant by "no network" symbol. Im pretty sure that its a modem issue. Strange taht flashing a modem over it wonrt work, and other than that the rom works perfectly, but not being able to use my phone to make calls is kind of a dealbreaker.
Most popular will be those listed on the first page of development
Thanks
FNSM
This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW
Nice
First too. Didn't even realize
Sent from my SGH-I317 using Tapatalk
Thanks:laugh:
Not going to need this but great work man!
Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Duffman14 said:
Choice for a flash able zip?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495
talkingmonkeys said:
There already is one here
http://forum.xda-developers.com/showthread.php?t=2749495
Click to expand...
Click to collapse
Ty sir
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
You're all quite welcome. I may reupload sometime soon with boot loader / modem included to make it easier for people. (There would be two different versions, one with the at&t modem and one with the bell/telus/rogers one)
Can anyone confirm whether or not this is a daily driver?
n_alvarez2007 said:
Can anyone confirm whether or not this is a daily driver?
Click to expand...
Click to collapse
Aside from not being able to send MMS with WiFi on (SMS works fine) this should be fully capable of being a DD.
Use Handcent messaging app, set it as default and mms while Wi-Fi is active will work
Restl3ss said:
This, for the most part, is not my work. What this is is @DocHoliday77 's port of the sprint SGS3 4.4.2 ROM, which I have repackaged into an Odin .tar.md5; the point being for those who would rather flash this via ODIN instead of twrp/cwm.
You can thank DocHoliday77 for his hard work here, all I did was edit the build.prop and repackage with multiboot. Download link below.
Included in this .tar.md5:
-System image, with build.prop edited to accurately reflect our device.
-multiboot 2.12 recovery image (for those who don't know, it's TWRP 2.7 with the added ability to boot other ROMs in a sandbox)
-KT747 boot image, which is included with the original port flashable zip.
YOU MUST HAVE AN OFFICIAL 4.3 BOOTLOADER / MODEM INSTALLED. THERE IS NO WAY TO CIRCUMVENT THIS.
Download: Stock rooted 4.4.2 TW
Click to expand...
Click to collapse
I cant seem to get this to flash with odin..... STOCK_ROOTED_4.4.2_TW_I747.tar.md5 is invalid
Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app
Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me
chivas1311 said:
Can I install on i747m like this?
Sent from my SGH-I747M using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Restl3ss said:
Confirmed, this is not working at the moment. The system image is broken and I'm not sure why, bear with me
Click to expand...
Click to collapse
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It does yeah, but I tried it without the md5sum and it failed as well, just after nand write start. On the download here the md5 check fails because the binary is supposedly invalid.
The system image was made by running mkfs-yaffs2-x86 on the system folder from the original port zip, running unyaffs does unpack it, but something is definitely not right with this image, I tried using unpack-ext4 on windows which usually works on odin system images but it didn't on this one.
Making an odin flashable isnt a straight forward process for the S3 it seems. MrRobinson is the only one I know of off hand that has an effective process to do so. He only gives clues to his process in his op. Ive done one a long time ago, but I think what I had to do was take tar the system.img dumped directly from the device using the dd command.
If I remember right, it had to be done immediately after flashing, been too long though so I cant remember for certain.
So if I am recalling it correctly, flash the rom, factory reset, then while still in recovery, using either adb or the built in terminal emulator, use dd to dump the image to your sd card.
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Not sure as I cant read your language, sorry. But one part says its LI1 and another says ND3. First, the bootloader/firmware version MUST be a 4.3 build.
Second, what is the ND3? Is that some sort of test build? Or did I miss something somewhere?
Does it fail at the md5 check?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
It's a Stock 4.3 bulid from Telcel, Mexico, in SamMobile says this:
In english:
Ok, thanks for the clarification on that. Once its confirmed working, you should be able to flash it just fine. If that baseband is not 4.3 though, you will likely have to update it as well.
For now though, you can always just flash the rom this was built from. Should get you exactly the same thing, only the method is different.
Sent from my SGH-T999 using Tapatalk