Related
I am running v6.0.1.4 and it won't do anything.
It wont backup, restore, or install, it just freezes.
If I try to run a factory reset or a dalvic cache wipe it freezes too.
Nothing is working and I can't even start my phone because I tried to restore it and again, it froze.
Can anyone help me out here at all? I have no clue what to do, and I really would appreciate the help.
spuzwuzzel said:
I am running v6.0.1.4 and it won't do anything.
It wont backup, restore, or install, it just freezes.
If I try to run a factory reset or a dalvic cache wipe it freezes too.
Nothing is working and I can't even start my phone because I tried to restore it and again, it froze.
Can anyone help me out here at all? I have no clue what to do, and I really would appreciate the help.
Click to expand...
Click to collapse
Odin back to stock, or flash twrp and try that. Also this should not be in this section bud. Prepare to be flamed by the community
Sent from my SGH-T989 using xda app-developers app
I had the same thing happen to me when I updated to the latest one, it would freeze at either restoring, or wiping cache. Luckily I was able to just reboot, and everything was fine on the phone, I then downgraded to 5.XXX
I've been having the same issue on stock recovery, where it sometimes it freezes at wiping, then flash the one from rom manager and its all good. by the way mods please move the thread to Q/A
Wrong section bro. Please see the noob video.
Sent from my SGH-T989 using xda premium
You don't have to Odin stock or any of that stuff, just fastboot flash the 6.0.0.5 version (or that last one that worked for you) and you should be fine.
spuzwuzzel said:
I am running v6.0.1.4 and it won't do anything.
It wont backup, restore, or install, it just freezes.
If I try to run a factory reset or a dalvic cache wipe it freezes too.
Nothing is working and I can't even start my phone because I tried to restore it and again, it froze.
Can anyone help me out here at all? I have no clue what to do, and I really would appreciate the help.
Click to expand...
Click to collapse
Ok, don't panic. I've been having this twice a day every day for the past little while. I first started having this problem when I flashed MIUI JB, but very soon after every JB ROM out there started hanging on me, or killing my recovery in this fashion. It's fixable, though for the life of me I can't tell you what causes it.
Don't ODIN back to stock. Not yet anyway.
ODIN your very first recovery, just as if you are about to root your phone for the first time. ODIN CWM 5.0.2.7, not 6.0.1.4. Yes, it's ancient, I know. Catch your phone as it's rebooting after the flash, and get it to enter recovery. Don't let it boot into whichever ROM you have installed. Then go to MOUNT > MOUNT USB and attach your phone to the computer. Copy Darkside Superwipe over. Unmount from the computer and unmount from the phone. Then get CWM to run the script. You must superwipe your phone, so if you have something important, hope you have a backup. This time around it won't hang on you.
Your phone is recovered, you can now flash anything you want and it will work. You can restore your nondroid backup as well and this will also work. If your nandroid back is in the new CWM format, you will want to flash CWM v6 first. Feel free to flash whichever recovery works for you, but CWM 5.0.2.7 is your fallback recovery in case you need to recover your phone again. It is the only one that does not seem to get corrupted in this way.
You can ODIN back to stock now if you want to make absolutely sure everything is wiped clean, but in my experience this does not contribute much to the overall cleanliness of things: it's not called Superwipe for nothing. It doesn't hurt, though: as long as you do it AFTER you have superwiped, or not even ODIN will recover your phone. It really scared me once when I skipped the superwipe step and was left with a 100% stock phone which wouldn't boot.
---------- Post added at 10:28 PM ---------- Previous post was at 10:12 PM ----------
Careful with ODIN: Make sure you have NO PIT file selected, or you will kill your phone! Been there, done that, and I don't recommend it. Do it by the book!
kangelov said:
Ok, don't panic. I've been having this twice a day every day for the past little while. I first started having this problem when I flashed MIUI JB, but very soon after every JB ROM out there started hanging on me, or killing my recovery in this fashion. It's fixable, though for the life of me I can't tell you what causes it.
Don't ODIN back to stock. Not yet anyway.
ODIN your very first recovery, just as if you are about to root your phone for the first time. ODIN CWM 5.0.2.7, not 6.0.1.4. Yes, it's ancient, I know. Catch your phone as it's rebooting after the flash, and get it to enter recovery. Don't let it boot into whichever ROM you have installed. Then go to MOUNT > MOUNT USB and attach your phone to the computer. Copy Darkside Superwipe over. Unmount from the computer and unmount from the phone. Then get CWM to run the script. You must superwipe your phone, so if you have something important, hope you have a backup. This time around it won't hang on you.
Your phone is recovered, you can now flash anything you want and it will work. You can restore your nondroid backup as well and this will also work. If your nandroid back is in the new CWM format, you will want to flash CWM v6 first. Feel free to flash whichever recovery works for you, but CWM 5.0.2.7 is your fallback recovery in case you need to recover your phone again. It is the only one that does not seem to get corrupted in this way.
You can ODIN back to stock now if you want to make absolutely sure everything is wiped clean, but in my experience this does not contribute much to the overall cleanliness of things: it's not called Superwipe for nothing. It doesn't hurt, though: as long as you do it AFTER you have superwiped, or not even ODIN will recover your phone. It really scared me once when I skipped the superwipe step and was left with a 100% stock phone which wouldn't boot.
---------- Post added at 10:28 PM ---------- Previous post was at 10:12 PM ----------
Careful with ODIN: Make sure you have NO PIT file selected, or you will kill your phone! Been there, done that, and I don't recommend it. Do it by the book!
Click to expand...
Click to collapse
what do you mean my very first recovery? Also, I'm not familiar with Odin, I just install it on my pc right?
Miui JB is what I did too. Love me some Miui, but too many bugs. I can't even find the ICS Miui anymore...
spuzwuzzel said:
what do you mean my very first recovery? Also, I'm not familiar with Odin, I just install it on my pc right?
Miui JB is what I did too. Love me some Miui, but too many bugs. I can't even find the ICS Miui anymore...
Click to expand...
Click to collapse
Look, I'm sorry for your troubles but there is a good reason why we have four different sections. This thread being in DEVELOPMENT is only causing clutter. You will get much better help if its moved to its proper place, Q&A or general. Please PM a Mod to move this.
Sent from my SGH-T989 using xda premium
spuzwuzzel said:
what do you mean my very first recovery? Also, I'm not familiar with Odin, I just install it on my pc right?
Miui JB is what I did too. Love me some Miui, but too many bugs. I can't even find the ICS Miui anymore...
Click to expand...
Click to collapse
I am referring to the process you followed to install CWM on a stock phone. It didn't come with CWM already loaded, so you must have loaded it somehow. If not with ODIN, then what did you use?
kangelov said:
I am referring to the process you followed to install CWM on a stock phone. It didn't come with CWM already loaded, so you must have loaded it somehow. If not with ODIN, then what did you use?
Click to expand...
Click to collapse
I dont really know where to find 5.0.2.7. the website doesnt seem to have it. I used revolutionary
Thank you for your contribution to the development of the gs2.
Sent from my SGH-T989 using xda premium
Download the clock work mod app from playstore. Then your first choice after opening the apk, your first possible choice is flash cwm, do that. Pm me after that if you need help. he should be good now thanks
Sent from my SGH-T989 using xda app-developers app
Rushing said:
Download the clock work mod app from playstore. Then your first choice after opening the apk, your first possible choice is flash cwm, do that. Pm me after that if you need help. he should be good now thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
There is no clockworkmod app, unless you mean rom manager. At least, I can't find any. Also, I can't even get my rom to load at all
spuzwuzzel said:
There is no clockworkmod app, unless you mean rom manager. At least, I can't find any. Also, I can't even get my rom to load at all
Click to expand...
Click to collapse
Now that you are in the right place, I will help you. It looks like you flashed a corrupted recovery. What you need to is Odin flash CWM. Go here
http://forum.xda-developers.com/showthread.php?p=27290471
Download Odin and recovery.tar, and Odin flash it. Will boot up just fine after. Don't fear Odin. Its safe as long as you are careful and READ!!
Sent from my SGH-T989 using xda premium
LoopDoGG79 said:
Now that you are in the right place, I will help you. It looks like you flashed a corrupted recovery. What you need to is Odin flash CWM. Go here
http://forum.xda-developers.com/showthread.php?p=27290471
Download Odin and recovery.tar, and Odin flash it. Will boot up just fine after. Don't fear Odin. Its safe as long as you are careful and READ!!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Ya Odin flash the recovery tar is probably the easiest way to go
Sent from my Galaxy Nexus using xda app-developers app
Odin is a tool used internally by Samsung. As such, you can't expect Samsung to write you a manual. Be very careful, you can cause a lot of damage with it. It is powerful, though: it can bring your phone back from the brink of death. Or it can take a healthy phone and send it over the edge. What you are doing now is something every rooter does on day 1, and only after days and days of research. I am uncomfortable with what you are going to do now given that you have never done this before, but you have no choice: it's this or a useless phone.
Here's the rundown:
A PIT file is something like the Master Boot Record of your harddisk. Problem is, the first partition is something like your computer's BIOS: it tells your phone how to bootstrap. It can bootstrap into the normal mode, which runs Android, or it can initiate Download mode. Download mode is what ODIN needs to replace parts or all of your phone's software. If something goes wrong with that bootloader, your phone is something called a hard brick: it won't power on, it won't even run Download mode so that you can recover it back to stock. It is dead. If that ever happens, you need something called a JTAG flash: you send your phone out somewhere, and someone takes it apart, hopefully carefully, plugs a programmer into an engineering port on your phone's logic board, and reprograms the bootloader back again). Now with PIT file having the major potential to trash things completely, you really have to pay attention you don't load the wrong one. Problem is, the ODIN you just downloaded DOES come with a PIT file, and that PIT file is WRONG for your device. Follow the instructions! Follow the instructions really really carefully. Don't check off extra things! Don't uncheck things that should be checked! Don't add PIT files! Make sure you load the right file to the right place in ODIN. Your phone depends on it.
ODIN will program your phone from scratch, but you wouldn't want to use it too often. It's a dangerous tool, as you can imagine, and it is meant to replace your phone's software, not maintain it! That's why we have Recovery. Recovery is what you use to do basic maintenance to Android, such as factory reset and clean cache and stuff. With those custom recoveries out there, you gain the added ability to flash custom ROMs and a few other things as well, which is what this forum is all about. So, step one in anyone seeking to root their phone is, flash a custom recovery using ODIN, since you need Download mode for that. In an ideal world, you will never need to use ODIN again after you flash your custom recovery. Well, in the real world, you should needed it only very infrequently.
Your phone first got its custom recovery from a tool designed to automate things for you, and sent you flashing without ever giving you an idea how your phone works. Now you don't know how to recover your phone from a flash gone wrong: in the long run that tool did not do any favours to you. The steps I gave you will bring your phone back to life, it brought mine several times already. Something about those new JB ROMs corrupts every recovery I have tried. I don't know why, I don't know how, but it does it. To make matters worse, ODIN without a proper PIT file cannot repartition your phone and fix whatever mess caused the problem to begin with, so restoring stock directly won't do the trick, you need to flash custom recovery, to fix recovery, and then Superwipe to recreate and realign your system, data and cache partitions: that's a good chunk of your phone. So, after you do this, you should be back in business. From beginning to end, if you know what you are doing, the entire process should not take more than 30 minutes, but don't rush. Take your time: take hours, take days. Take all the time you need.
Read before you do anything, and ask if you don't understand.
I have this issue every now and then when I use the stock recovery (the one i use to root) with ODIN, where it get stuck on everytime i try to wipe or flash, What I used to do is factory stock with Odin, then realize the even though it froze on wiping factory data, the rom wiped!! so what i do know is install rom manager and flash their recovery and problem solve,
this thread is very useful thanks guys.
by the way i dont flash JB roms yet until I they completely fix the call issues so. do you think its not only JB roms?
gypsy214 said:
I have this issue every now and then when I use the stock recovery (the one i use to root) with ODIN, where it get stuck on everytime i try to wipe or flash, What I used to do is factory stock with Odin, then realize the even though it froze on wiping factory data, the rom wiped!! so what i do know is install rom manager and flash their recovery and problem solve,
this thread is very useful thanks guys.
by the way i dont flash JB roms yet until I they completely fix the call issues so. do you think its not only JB roms?
Click to expand...
Click to collapse
I have had the problem you describe as well. Some ROMs like certain recoveries better than others and if you end up with the wrong combo, they don't boot. Flashing the right recovery after that fixes it instantly, without even a need to reflash the ROM. No, this is a different problem.
We are talking about a problem where flashing a ROM corrupts your recovery so it will stop working on you completely: it just hangs, it won't restore, it won't flash anything. Also, one or more of the ROM partitions on your phone get corrupted somehow so that even ODIN back to stock doesn't get your phone working again (you end up with a fully stock phone that doesn't boot). Maybe the two are related, but I will let those who know more speak. I am just a regular guy who fiddles with his phone a lot more than he should.
As for the problem being on JB only: I've only had it when flashing JB ROMs. I first noticed it with MIUI, but then AOKP started acting up, and when I finally dared to flash a CM10 unofficial nightly for the first time, it happened too... And then I noticed it doesn't happen always, only sometimes, and other times it just leaves me with a JB ROM that doesn't boot, and in some rare occasions: it works without a hitch. Go figure.
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
SectorNine50 said:
I have unbricked this phone probably 15 times in the past day trying to just install a custom ROM.
I run through the unbricking process, get root, load the stock AT&T ROM, factory reset, and it boots just fine from there. However, after I load Clockwork Mod and try to load any custom ROMs at all, the phone will just bootloop forever. It also appears to remove the Clockwork Mod recovery image as well, since I no longer am able to get back into recovery after the flash of the new ROM.
I've scoured this forum for hours, and I'm at a complete loss. Any ideas?
P.S. I made a backup of my ROM before doing all of this using the latest version of Clockwork Mod, but was unable to restore it. It seems that the 6.x.x.x version of the recovery for this phone is busted in some way, it always reports that it can't access any of the root folders, even though the phone has been rooted. The 5.x.x.x versions don't seem to do this, but I still have issues flashing.
Click to expand...
Click to collapse
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
lordcheeto03 said:
Is it possible that your hosts file needs modifying when installing the AT&T ROM? If the LG Support tool connects to LG's servers instead of your local http you set up, it will load the official ICS and completely wipe your phone to install that ROM... With my limited amount of knowledge, that's about all I could see if the process removes CWM Recovery.
Also, CWM 6.x is working fine for me, even manually flashed the touch recovery a few minutes ago, backed up my ROM and installed an updated ROM. No problems at all.
Click to expand...
Click to collapse
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
Swetnes said:
I don't know if anyone has tried the unbrick method with the new version of cwm but you might try twrp. When a similar version of cwm was in beta there were all sorts of issues. So maybe they haven't been fixed. Also are you installing cwm from GB? ICS has a locked boot loader so that might also be an issue.
http://forum.xda-developers.com/showthread.php?t=1888910
Now I would start with the unbricking guide for a 16th time but follow the directions to install twrp instead of cwm. You might also find you like it better. Good luck.
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
SectorNine50 said:
I don't believe that the unbricking process would work if the hosts file was wrong, but I checked it again anyway, and it appears to be correct.
The AT&T ROM gets pushed via the abd shell after the unbrick and rooting process. The root appears to work, as the AT&T ROM that I push works fine, it's just not the ROM I want!
After the unbricking process (after I get through all the nonsense on the Korean ROM), the phone is running the GB AT&T ROM, from there I push the CWM recovery.img to the phone using the abd shell. All seems to be working perfectly up until I go to flash the custom ROM! I don't get any errors when I flash the .zip either.
Initially I had installed CWM 6.x.x.x using the ROM Manager application. That's before all this nonsense started, and the phone was on the stock (but rooted) AT&T ICS ROM, so I know that's why I "bricked" my phone the first time.
I'll give TWRP a shot, hopefully that will work.
Click to expand...
Click to collapse
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Ok so we know it's not the boot loader issue of ICS after dozens if not hundreds of successful installs using the unbricking guide the only thing left is the new version of cwm. Hopefully twrp will do the trick for you. Has anyone out there successfully completed the unbricking guide with the new version of cwm?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
SectorNine50 said:
I haven't tried the TWRP recovery a shot yet, since I haven't been home, but I figured it was worth pointing out that the CWM 5.x.x.x (can't remember exact version numbers right now) didn't work for me either. Every time I flashed a ROM, I'd end up with a boot loop on first boot, and then when I'd try to go back into recovery, I'd find that it wouldn't go back in there either.
It was basically acting like when I flashed the ROM that it overwrote the recovery partition, except no one else seems to have this same issue. Yet, if I didn't flash a ROM, I was able to go in and out of CWM recovery as often as I wanted.
Bah.
Click to expand...
Click to collapse
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
drumist said:
Can you clarify exactly what method you are using to flash the ROM? I just can't imagine a scenario where flashing a ROM would overwrite the recovery. What ROM are you flashing?
Also, please confirm what phone you have.
Click to expand...
Click to collapse
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
You are correct, the Nitro is P930. And I'm sure this doesn't need pointing out, but when you download the ROM, make sure it's for P93x and not SU640. Most of the ROMS in the developer section have versions for both models.
Also, when you say you can't access CWM after flashing a ROM, how are you trying to access it? Holding Power+Volume down until the Factory Reset screen pops up? It still shows that screen even with CWM installed, but when you press the power button to perform the factory reset it SHOULD take you into CWM Recovery instead.
SectorNine50 said:
Sure, I may be using the wrong term (my first experiences with custom ROMs date back to Windows Mobile, so the terminology probably blends together), but I'm basically loading the .zip from the SD Card in CWM. I've tried both the CM9 P930 ROM and Paranoid Android CM10.
That was my thought too, I didn't think that the custom ROMs even had recovery images in them. I may be wrong in saying that it deletes CWM, but after the wipe and flash I am no longer able to access it.
I have the LG Nitro HD, and from what I can gather, that is the P930, correct? I hope the issue I'm having is as simple as I'm flashing for the wrong phone...
By the way, thank you all for your help and input, I really appreciate it!
Click to expand...
Click to collapse
To access recovery, turn the device completely off. (If you're in a bootloop, pull battery or hold power button for ~20 seconds until screen stays off.) Then when phone is off, press and hold volume down and power buttons at the same time, not releasing until you see text asking if you want to factory reset. Press power button twice to confirm and you'll get to recovery.
Is this the method you're using to try to get to CWM?
My guess as to why you are getting bootloops is that you aren't wiping data first.
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
SectorNine50 said:
Yup, that's how I'm accessing CWM. After the flash, after I press the power button twice, I get something similar to a boot loop. A recovery boot loop, if you will.
Well, I've tried a couple ways now. I've tried using the "factory reset/wipe user data" menu item in CWM, and I've tried going into each partition and wiping them individually before flashing as well.
Just got home, I'll try flashing using the TWRP and let you guys know.
Click to expand...
Click to collapse
Good luck. Other possible things to try:
1) Check zip MD5 hash (or just redownload and replace) to make sure it's not corrupted.
2) Reformat entire SD card.
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
SectorNine50 said:
Interesting update:
I decided to give getting back into CWM recovery one more shot before I went through the process of re-unbricking again, and this time it managed to get in (for whatever reason).
So, I did a factory wipe, cleared dalvik cache, flashed the ParanoidAndroid ROM, backed out, did another factory wipe, and tried to reboot into the newly flashed ROM.
No luck. Boot looped, and didn't even get to the ROM animation. Following that, I had trouble getting back into the CWM recovery. Managed to try about 5 times and finally got in, however CWM stated:
Code:
CWM-based Recovery v5.0.2.7
E:Error in /cache/recovery/last_log
(Read-only file system)
So... my phone may have potentially unrooted it's self, somehow... Interestingly, it still shows the file systems as mounted.
So, now I'm doing a full SD card reformat. Figured I'd get that variable out of the way before I go any further.
Click to expand...
Click to collapse
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
drumist said:
You are installing the wrong version of CWM. Never use anything older than 5.8.2.0. This is the one you want: http://download2.clockworkmod.com/recoveries/recovery-clockwork-5.8.2.0-p930.img
Anything older than that is known to not work.
Second thing: You seem to have an incorrect understanding of what "root" means. Having "root" simply means you have administrator access to your current ROM. When you install a new ROM, whether you had root access to your old ROM is meaningless frankly.
Click to expand...
Click to collapse
Ah, thank you! I must've been viewing an old thread. Now that I look at the version number, it appears that's the version I had been hunting for since the newest one didn't work.
Interesting, I most certainly misunderstood, I was under the impression that "rooting" the device was a filesystem level permission change. Good to know!
It seems like we are getting closer to a solution here. Thanks for your patience!
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
SectorNine50 said:
Well, that appears to have been my problem the whole time! That's kind of embarrassing, considering how much time I sunk into this and how simple the solution was!
Anyway, thank you all very much! I assume that TWRP would have also solved my problems as well. It would seem that both the older and newest versions of CWM have some problems (at least for me!).
Click to expand...
Click to collapse
Yeah, the new one (6.0.1.5) just came out. I'll have to test it to see if it works for me.
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Malnilion said:
For what it's worth, I haven't had any issues with 6.0.1.5 yet. The touch version is a must, though.
Click to expand...
Click to collapse
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Swetnes said:
Have you had a chance to compare to twrp?
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I really enjoy the integration Rom Manager/CM Updater has with CWM. If twrp is capable of running the install scripts those two use, I might consider trying it out, but I don't really like manually going through the steps to flash a rom every day.
Prior to receiving my GS2 from T-Mobile I did research on how to Root, Flash ROMs, you know, all the cool things Android phones can do, and I mean A LOT of research. When I finally did recieve my phone the first thing I did was root it, which worked flawlessly - at which point I thought "Hey, this isn't so hard I won't have any problems at all!" OH BOY WAS I WRONG.
Here's where everything went wrong: The first ROM I thought I'd install was AOKP Milestone and then I'd try CM10, so I put both .Zip files into my SD card. I backed up to Titanium Backup and to my External SD card through Clockwork mod then I installed AOKP Milestone and made it to the home screen with some force close messages. It was running, but didn't look very stable to me and the whole "Swagger" thing turned me off to it. I went back to Clockwork Mod and the website that I got CM10 from also told me to run DarkSide Wipe before installing the ROM so I did just that. Ran Darkside, installed CM10, then installed Gapps. I then rebooted my phone and CM10 started to load up, but after 10 minutes of just the splash screen I assumed it was stuck in a bootloop. I then restored the backup I made before installing Milestone, but I remember there being an error and it not being successful. It was at this point that Clockwork Mod started being buggy. Starting to panic, I tried a factory reset through CWM. It formatted data no problem, but it would hang at "formatting /cache" until I turned off the phone. So I panicked some more and formatted system, emmc, data. (Not a smart idea, I know.) but it would hang when I tried formatting the cache again. And its been stuck in a bootloop ever since.
I read somewhere that you could use Odin to revert your phone to make it completely stock by flashing a kernel. I thought my prayers were answered! I was finally going to just start over and forget this ever happened! No. My computer won't even recognize my phone is plugged into it. (Yes, I have all drivers up to date. Yes, I am using Samsung Micro USB, and Yes, I have Keis installed.) Since my computer won't recognize my Phone, Odin won't.
* I can access Clockwork mod, and Download mode, but my computer won't recognize my phone when plugged in.*
I know it's a lot to read but I have tried so many things I'm just so discouraged about this whole thing. I know I'm a noob so please explain your answers like I'm 5. I don't understand most Android modding slang.
Thank you.
What version of CWM are you using?
Sent from my SAMSUNG-SGH-T989 using xda premium
6Seven said:
What version of CWM are you using?
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
v6.0.1.9 Touch
If you have an external sd card, load a rom on to it from your computer and then get your phone into recovery mode and choose to install from external sd card. See if that works. Also sometimes a cache wipe can take a while. Also don't panic and start doing things you know nothing about. I would recommend and ice based rom then figure how to get twrp recovery then move on to cm10. . If you can get past this, I can help you. Pm me
badaphooko01 said:
If you have an external sd card, load a rom on to it from your computer and then get your phone into recovery mode and choose to install from external sd card. See if that works. Also sometimes a cache wipe can take a while. Also don't panic and start doing things you know nothing about. I would recommend and ice based rom then figure how to get twrp recovery then move on to cm10. . If you can get past this, I can help you. Pm me
Click to expand...
Click to collapse
Ok, I will see if I can get an ICS ROM onto my Micro SD. If it works I will PM you. Thank you.
I'm still open to more suggestions!
EDIT: The funny thing is, when my phone is in CWM my computer recognizes it and I can mount USB storage, but won't recognize it while in download mode. Weird.
don't use superwipe with cwm 6+. it will break your recovery and cause a bootloop.
also it seems that a lot of people have problems with cwm 6.0.1.9 and it seems like it doesn't wipe properly so i would recommend latest twrp or sk8terwitskil's cwm. i think that's what happened with aokp and why you were having so much fcs.
merrygocow said:
don't use superwipe with cwm 6+. it will break your recovery and cause a bootloop.
also it seems that a lot of people have problems with cwm 6.0.1.9 and it seems like it doesn't wipe properly so i would recommend latest twrp or sk8terwitskil's cwm. i think that's what happened with aokp and why you were having so much fcs.
Click to expand...
Click to collapse
Duly noted. Thank you for the info, really helps.
also have you looked at this thread?
http://forum.xda-developers.com/showthread.php?t=1513359
have you tried removing your battery and see if that will help your computer recognize your phone? i don't know if it will work or not but try. :laugh:
merrygocow said:
also have you looked at this thread?
http://forum.xda-developers.com/showthread.php?t=1513359
have you tried removing your battery and see if that will help your computer recognize your phone? i don't know if it will work or not but try. :laugh:
Click to expand...
Click to collapse
Yes, that is what I was referring to here:
I read somewhere that you could use Odin to revert your phone to make it completely stock by flashing a kernel. I thought my prayers were answered! I was finally going to just start over and forget this ever happened! No. My computer won't even recognize my phone is plugged into it. (Yes, I have all drivers up to date. Yes, I am using Samsung Micro USB, and Yes, I have Keis installed.) Since my computer won't recognize my Phone, Odin won't.
Click to expand...
Click to collapse
Battery pull didn't work either. :/
UPDATE: I've tried installing 3 different ICS ROMs from the external SD via CWM but they all seem to freeze 3/4 through the install. After about 5 mins of being frozen the phone reboots and the bootloop just comes back. Once again I have nowhere to go. I'm lost.
If anyone has more suggestions, please share!
i don't know where i read it but i just remember now that someone said kies and odin are incompatible. so maybe that's why odin couldn't detect your phone? kies might have been running in the bg.
so i would uninstall kies and driver. restart comp. then download and install just the driver from samsung website. then put the phone into download mode and connect to pc. see if that will help.
if not, i don't know lol. usually i would suggest flashing to twrp but i don't know how well that's gonna go over a broken recovery.
I would suggest flashing TWRP recovery 2.3.3 and try and flash a ROM again after....CWM has gone downhill in my opinion.
Here is the TWRP thread http://forum.xda-developers.com/showthread.php?t=1768742
Or download GooManager app and install that way
And do not use any cache wipe scripts with this.
Sent from my SGH-T989 using xda premium
You need to have computer install odin driver while you're in download mode before odin works. Try this wipe cache, wipe dalvik, wipe data/factory reset, format system, format cache and format system. Then flash new rom in recovery.
Sent from my SGH-T989 using Tapatalk
RESOLVED!
Funny thing is, I just plugged in my phone to a computer running Windows 7 and Odin recognized it! I guess my XP at home doesn't like phones. From there I flashed a stock kernel and VIOLA! Phone is out of the box new! Now I'm very weary about installing a ROM again.. I don't want to go through that ever again. Maybe i'll do some more research before I molest the software's insides.
Thank you everyone for your contributions!
Try recovery from sk8erwitskil, it's the only one that seems to work w/ my Hercules. I had similar problems to what you were experiencing and it's the only recovery that worked for some reason. I am on a GNex now so take that for what it's worth. I'll pull out the Herc. tonight when I get home to update to the CM10 latest nightly, it's been a while.
A strange predicament indeed. Two identical SPH-L710 phones, both came packaged running 4.1.2 build MD4 and, using this toolkit, I was able to successfully root, flash TWRP recovery and proceed to flash a custom ROM with no issues...at least to one of the phones.
My problems began with the second device. I was able to successfully root and flash recovery (TWRP or CWM) here as well. I question the success of the recovery flash due to the picture as indicated where I get numerous 'unable to...' everything. I might also add that on recovery entry TWRP asks for a password. I am not bricked as I can boot normally into the OS and use the rooted phone. I feel like I have tried everything I could find on this forum as well as several other sites to no avail. I have downgraded to 4.1.1 build LJ7 with the exact same results. I have repartitioned as well. Right now the second device is running build LJ7 since I have come to a screeching halt until I find more things to flash and hack away at this stubborn thing!
This is by no means my first bout with the Android platform, but if anyone can give me a pointer or two to set me on the right path, I will gladly hand out some thank yous!!
I had the same issue on mine. Dropping back to TWRP 2.3.1 solved it for me. Some L-710s just seem to not like the updated version.
Sent from my SPH-L710 using XDA
You can try Flash Image GUI from the Play Store. Or maybe even Rom Manager. Then Uninstall it when you are done.
jdonmc1948 said:
I had the same issue on mine. Dropping back to TWRP 2.3.1 solved it for me. Some L-710s just seem to not like the updated version.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
I initially flashed all the way back to the TWRP build before 2.3.1 but stopped there. I'll report back with results of your recommendation in the morning!
prboy1969 said:
You can try Flash Image GUI from the Play Store. Or maybe even Rom Manager. Then Uninstall it when you are done.
Click to expand...
Click to collapse
ROM Manager was something I tried as a last resort as well, it flashed the custom recovery alright, but soft bricked it with a redundant recovery bootloop. I got past that by Odin-ing back to stock.
Odd. I've used the Toolkit you mentioned in your OP. Also the other methods to install a Recovery. Did you manage to Root again, and install a Recovery ?
prboy1969 said:
Odd. I've used the Toolkit you mentioned in your OP. Also the other methods to install a Recovery. Did you manage to Root again, and install a Recovery ?
Click to expand...
Click to collapse
Yes, I can easily root every time with Mark's toolkit as well as install a recovery, but I always get the 'unable to mount...' message when I attempt to do anything and it will not recognize neither the internal nor the external sdcard.
jdonmc1948 said:
I had the same issue on mine. Dropping back to TWRP 2.3.1 solved it for me. Some L-710s just seem to not like the updated version.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
UPDATE: Still in the same boat even after flashing all the way back to TWRP 2.2.2.0. Recovery can't find or mount anything!
Although I'm not sure why (since I used the same methods and the same toolkit on both phones), I have a feeling that the internal memory and/or partitions somehow got corrupted. The only thing I haven't tried is using Odin to repartition and reflash everything including the bootloader. Hopefully someone has posted the files for us!
n3td3v said:
Yes, I can easily root every time with Mark's toolkit as well as install a recovery, but I always get the 'unable to mount...' message when I attempt to do anything and it will not recognize neither the internal nor the external sdcard.
UPDATE: Still in the same boat even after flashing all the way back to TWRP 2.2.2.0. Recovery can't find or mount anything!
Although I'm not sure why (since I used the same methods and the same toolkit on both phones), I have a feeling that the internal memory and/or partitions somehow got corrupted. The only thing I haven't tried is using Odin to repartition and reflash everything including the bootloader. Hopefully someone has posted the files for us!
Click to expand...
Click to collapse
I believe you can do that with mskip's Toolkit. I would also reformat the SD Card. To format the SD Card you can use SD Formatter.
prboy1969 said:
I believe you can do that with mskip's Toolkit. I would also reformat the SD Card. To format the SD Card you can use SD Formatter.
Click to expand...
Click to collapse
I tried formatting the sdcard as well as without the sdcard and even with a different one to no avail. I'm still on the hunt for pda, csc, etc. Odin files. My last resort will be to figure out how to get it replaced at Sprint as a defective device lol
Sent from my SPH-L710 using xda premium
Have you tried using stock recovery? obviously not to flash anything but just to try and navigate the sd or wipe the cache for example. Just curious if the mounting issues are present in all recoveries or just twrp/cwm. Also a bit intrigued by the fact that the phone still boots and operates normally
Sent from my SPH-L900 using xda premium
billard412 said:
Have you tried using stock recovery? obviously not to flash anything but just to try and navigate the sd or wipe the cache for example. Just curious if the mounting issues are present in all recoveries or just twrp/cwm. Also a bit intrigued by the fact that the phone still boots and operates normally
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Yes, stock recovery allows clearing of cache, depending on whose stock recovery I flash. If I flash the toolkit version of stock, I can clear no problems. There are a couple of other stock recoveries, such as this one, in which everything fails as well.
FYI, I have even flashed the stock builds you have on sxtp with the same results.
Thanks for this -- you solved my problem...at least mostly.
I tried to root a new Sprint SG3 by ODIN'ing CWM and then flashing a root.zip file. That epic failed just like your situation where nothing would mount in recovery whether I used CWM or TWRP. I am assuming that something must've changed on the Sprint S3's and that root method must not work anymore (for whatever reason). So I decided to go back to stock recovery and just wait and see if anything further is discovered about this here (I'm not a dev, so I have to wait for other more talented people to solve my problems). However, the stock recovery image that I downloaded from the same "Easy Root" tutorial here didn't work and I still couldn't mount anything.
Saw your post where you stated that the Toolkit stock recovery image worked, so I just tried that and score! However...my poor little recovery android is on his back with a red triangle and a "!". Everything mounts, I can wipe cache, browse around for an update, etc., but I'm a little concerned that my little Android is sick. Should I be? Is that because I have a flash count of 5 so it thinks I have a custom ROM?
Sorry to hijack your thread a little, but my problems seems to be related.
n3td3v said:
A strange predicament indeed. Two identical SPH-L710 phones, both came packaged running 4.1.2 build MD4 and, using this toolkit, I was able to successfully root, flash TWRP recovery and proceed to flash a custom ROM with no issues...at least to one of the phones.
My problems began with the second device. I was able to successfully root and flash recovery (TWRP or CWM) here as well. I question the success of the recovery flash due to the picture as indicated where I get numerous 'unable to...' everything. I might also add that on recovery entry TWRP asks for a password. I am not bricked as I can boot normally into the OS and use the rooted phone. I feel like I have tried everything I could find on this forum as well as several other sites to no avail. I have downgraded to 4.1.1 build LJ7 with the exact same results. I have repartitioned as well. Right now the second device is running build LJ7 since I have come to a screeching halt until I find more things to flash and hack away at this stubborn thing!
This is by no means my first bout with the Android platform, but if anyone can give me a pointer or two to set me on the right path, I will gladly hand out some thank yous!!
Click to expand...
Click to collapse
I just got a brand new GS3 today and am having the exact same problem you describe. I have rooted several GS3s before... normally is child's play. I am a bit embarrassed to get stuck here. CWM nor TWRP mount anything... major bummer. TWRP prompts me for a password as if it thinks it is an encrypted /data partition... strange.
swiggs98 said:
I just got a brand new GS3 today and am having the exact same problem you describe. I have rooted several GS3s before... normally is child's play. I am a bit embarrassed to get stuck here. CWM nor TWRP mount anything... major bummer. TWRP prompts me for a password as if it thinks it is an encrypted /data partition... strange.
Click to expand...
Click to collapse
Same boat. Rooted probably 6 S3 before now and my wife's new S3 I am seeing same thing.
Sent from my SPH-L900 using xda app-developers app
I'm having the same issue. I finally downloaded an image that allowed me to flash it but I still cannot mount anything in recovery? Any help would be nice
Thanks guys, it is comforting to know I'm not the only poor soul stuck in this rut! I'm pretty sure I have exhausted all flashing resources out there at this point, but I'm eager to try whatever new that has potential of working that anyone cares to conjure up.
One strange thing I have also noticed on the problematic phone is that the signal is significantly weaker than my phone, even when both were at stock. It is always dropping calls and/or going into roaming, etc. I haven't been able to produce a log of any sort as they won't write since recovery cannot mount ANYTHING! Lol
n3td3v said:
Thanks guys, it is comforting to know I'm not the only poor soul stuck in this rut! I'm pretty sure I have exhausted all flashing resources out there at this point, but I'm eager to try whatever new that has potential of working that anyone cares to conjure up.
One strange thing I have also noticed on the problematic phone is that the signal is significantly weaker than my phone, even when both were at stock. It is always dropping calls and/or going into roaming, etc. I haven't been able to produce a log of any sort as they won't write since recovery cannot mount ANYTHING! Lol
Click to expand...
Click to collapse
Folks, A quick search would have led ya here : http://forum.xda-developers.com/showthread.php?t=2183910&page=4 This is a known issue with both TWRP and CWM recoveries on newer S3's. Devs are working on it to find a solution. Just a matter of being patient and waiting. IF you just want root access, you can odin a pre-rooted rom to the phone with no issues. You'll atleast have root at that point. Just unable to change rom/kernels on the fly.
I achieved root with virtually no issues but thank you for the link!
Sent from my SPH-L710 using xda premium
Hi, hope my exact issue wasn't discussed after page 10 of the help & troubleshoot forum, anyway my rooted, unlocked cwm recovery stock 4.2 yakju (if I remember well) Samsung GNEX started to behave strangely slower then usual less then a week ago, then a couple of days later I woke up after night battery recharge to the boot up animation which never gave way to the operating system starting up.
After the first moment of despair I tried reading something here and with the use of adb I was able to first see the device and, after backing up via recovery, to pull the files from the phone (backup included). Problem is the 0 folder is very light for all the data and apps that I had, and inside the DCIM folder there's nothing, no trace of the 1k+ picture I shot in the past couple years, only an igc file which should have been in another folder. But strangely enough the backup weights almost 6GB which is consistent with what was inside prior to the crash.
Before attempting the backup I fiddled with recovery and tried to wipe cache, dalvik and fixing permissions, with no apparent results.
So now I'm undecided whether to take the phone to a samsung job centre which will surely wipe all data and possibly find out I have a corrupt memory or partition table, which renders many files and folders unavailable to be adb pulled or to wipe data/restore factory by myself hopying, fingers crossed, that the backup actually saved all my files and that could be restored without hassle. I actually had hoped that, like for the desktop environment, there was the possibility to awake my phone with a linux live or whatever to check if all files were present and downloadable before actually restoring the phone.
Thanks for your interest and help.
https://drive.google.com/file/d/0B8Pbk0TslYN6cm1wWWZydVM2V0k/edit?usp=sharing
Have you tried dirty flashing your rom?
Sent from my Galaxy Nexus using XDA Free mobile app
This is probably what I was thinking to do in the last sentence, I just have no idea how this could be done. Are there any videos explaining a dirty flash for gnex out there? Thanks for your help
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
berniefranz said:
This is probably what I was thinking to do in the last sentence, I just have no idea how this could be done. Are there any videos explaining a dirty flash for gnex out there? Thanks for your help
Sent from my ASUS Transformer Pad TF300T using XDA Free mobile app
Click to expand...
Click to collapse
Its really easy. Just wipe cache and dalvik cache and then flash your rom (the same rom that is on the phone) again. Reboot.
Sent from my Galaxy Nexus using XDA Free mobile app
As far as I remember there is no identifiable rom files inside my GNEX memory, or wait, it seems I do already have a 6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815 zip in my download folder. So I need to clean cache and dalvik then install from zip. Do you know if this system wipes everything and I need to restore everything applying my hopefully working backup, or if it keeps all the files?
I'll try it tomorrow with fingers crossed.
Thanks again
mrgnex said:
Its really easy. Just wipe cache and dalvik cache and then flash your rom (the same rom that is on the phone) again. Reboot.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
berniefranz said:
As far as I remember there is no identifiable rom files inside my GNEX memory, or wait, it seems I do already have a 6c7ff815e7762f651ad6f8c74e5cb281093f1e0b.signed-yakju-JWR66V-from-JDQ39.6c7ff815 zip in my download folder. So I need to clean cache and dalvik then install from zip. Do you know if this system wipes everything and I need to restore everything applying my hopefully working backup, or if it keeps all the files?
I'll try it tomorrow with fingers crossed.
Thanks again
Click to expand...
Click to collapse
Dirty flashing wont wipe any data. Only cache (which is only helpful with some speed). Cache will rebuild. If thats your rom. Dirty flash it. If it isnt. Adb push the right rom.
Sent from my Galaxy Nexus using XDA Free mobile app
Then I don't think the mentioned file is the my rom but a rom update I wanted to push myself but never did. Now, I'm definitely sure it was already JB, but which flavour? 4.2 JOP40C, 4.2.1 JOP40D or 4.2.2 JDQ39? I guess it should have been the last one, if I intended to update from JDQ to JWR (according to the file name), and I'm quite sure it was Jakju but just can't remember for sure. Is there a way via recovery or adb to check which was my rom? Or should I just close my eyes and download and flash JDQ39?
Again, thanks
mrgnex said:
Dirty flashing wont wipe any data. Only cache (which is only helpful with some speed). Cache will rebuild. If thats your rom. Dirty flash it. If it isnt. Adb push the right rom.
Sent from my Galaxy Nexus using XDA Free mobile app
Click to expand...
Click to collapse
berniefranz said:
Then I don't think the mentioned file is the my rom but a rom update I wanted to push myself but never did. Now, I'm definitely sure it was already JB, but which flavour? 4.2 JOP40C, 4.2.1 JOP40D or 4.2.2 JDQ39? I guess it should have been the last one, if I intended to update from JDQ to JWR (according to the file name), and I'm quite sure it was Jakju but just can't remember for sure. Is there a way via recovery or adb to check which was my rom? Or should I just close my eyes and download and flash JDQ39?
Again, thanks
Click to expand...
Click to collapse
I know that TWRP default names a nandroid as the ROM build name/number and date. Don't know what cwm does for that as its been ages since I used it. You could install twrp and see what that tells you as the name of backup maybe to try and grab current ROM info.
Or using the file manager in recovery(twrp has one dunno about cwm) and see if you can look at the build.prop in /system which will have all relevant ROM information. If you can use adb in recovery try pulling /system/build.prop and looking at it. Right near top will be ROM build and info
Thanks, CWM doesn't have a file manager, but adb did actually pull the build prop id=JOP40D, so I'll go back to download the correct ROM and try to flash it..
ashclepdia said:
I know that TWRP default names a nandroid as the ROM build name/number and date. Don't know what cwm does for that as its been ages since I used it. You could install twrp and see what that tells you as the name of backup maybe to try and grab current ROM info.
Or using the file manager in recovery(twrp has one dunno about cwm) and see if you can look at the build.prop in /system which will have all relevant ROM information. If you can use adb in recovery try pulling /system/build.prop and looking at it. Right near top will be ROM build and info
Click to expand...
Click to collapse
small update, I managed to download the correct rom and I tried to adb push the .tar to the device (twice and attempting a third to /sdcard/ /sdcard/clockworkmod/ and now /sdcard/0/Download/) but still haven't been able to spot the uploaded file to choose for dirty flash. adb shows the file as uploaded , but again no sign of it with CWM Recovery. should I try to install TWRP recovery? with the nexus toolkit there is a function to flash a rom, but it says it will wipe the device first, so it's really not the option I was looking for. Another strange behaviour of CWM Recovery, or maybe my phone, inside mounts and storage menu, mount sdcard seems to be not working as it never changes to unmount after you click it. I think my memory went berserk and that's the reason why the phone rebooted and never woke up again. Maybe I'll take to the nearest job center to ascertain the damage...
thanks for all your help
berniefranz said:
Thanks, CWM doesn't have a file manager, but adb did actually pull the build prop id=JOP40D, so I'll go back to download the correct ROM and try to flash it..
Click to expand...
Click to collapse
installed TWRP and was able to see to rom.tar uploaded via adb in the download folder, but wasn't able to use to flash as probably both recovery wants .zip and not .tar, so I'll now untar and zip the stock rom and upload it again...
small steps...
had a md5 check fail during flash, so still no good news. I was surfing a bit when noticed that developers.google.com doesn't have a factory image for 4.2.1 jop40d but only for 4.1.2 jzo54k. Does this mean I should flash 4.1.2 and then update, or try directly for the 4.2.1 which I can't find (a working one)?
went back to CWM but installation failed as well as TWRP, so I guess my last option is to take it to a samsung job center to check whether I have a corrupted memory or else... ANyway thanks everybody for your support..
berniefranz said:
had a md5 check fail during flash, so still no good news. I was surfing a bit when noticed that developers.google.com doesn't have a factory image for 4.2.1 jop40d but only for 4.1.2 jzo54k. Does this mean I should flash 4.1.2 and then update, or try directly for the 4.2.1 which I can't find (a working one)?
Click to expand...
Click to collapse
Had to take it to the job center where, it was downgraded to 4.0.4 (have still to check which flavour) fixed something and Wiped everything. When I side about he post mortem backup and the intention to try a restore from there I was give an are you kidding look, it could crash again... sigh.
Anyway thanks everyone that spent some time to try and explain a noob how to try to solve this issue.. Now I've got a new galaxy nexus, so after a little grievance I'll start reading on how to flash a nice rom...
berniefranz said:
went back to CWM but installation failed as well as TWRP, so I guess my last option is to take it to a samsung job center to check whether I have a corrupted memory or else... ANyway thanks everybody for your support..
Click to expand...
Click to collapse