Develop Bugs

FINALLY!! Energy ROM 4.1.1 and PacMan 4.2.2. at the same damn time!

Ive had the XT907 Razr M VZW for about 6 months now. ICS came installed and JB officially came out a couple weeks after my purchuse. I have bricked and RSD this phone so many times Ive lost count. First three months of owning this phone I wanted to throw it off the tallest bridge I could find. Now with my phone unlocked and running SafeStrap v3.11 I am able to run Stock VZW 4.1.2 on my stock ROM with Energy ROM 3.14.13 build with VZW 4.1.1 running on my ROM Slot 2. Also im able to have the 4.1.1 camera work on Slot 2 while having the 4.1.2 camera in Stock ROM slot. Once I had both ROMs stable on SafeStrap I went ahead and flashed PacMan 4.2.2 over my Stock slot which was where I had the VZW 4.1.2 stock update running. Being able to now run two kernals through one recovery is bliss. Energy ROM to be is the best 4.1.1 rom out there hands down. Smooth flowing , heavy AOKP based rom that truely fixed my Wifi connection or lack of connection issues. And now I get to run PacMan 4.2.2 which is just straight gangster of a ROM. CM10.1 based ROM that takes the best of numerous ROM builds and apps, throw in crazy amount of customization, and you get pretty much Christmas morning joy of endless options. Long story short, finally got my Razr M to be the beast that I knew it always could be.

You flashed pacman over the stock rom and it work for you? What about flash pacman on ROM slot 1? Manage to get it to work?
Sent from my XT907 using xda app-developers app

Now there's a clean rom
Sent from my XT907 using Tapatalk 2

I don't understand why you would want the energy over PAC... Not to be a jerk or anything. I would just like too understand what energy has that pac doesn't?
I had eclipse for a while. When the bl unlock showed up, well I pretty much crapped brix, I was so happy.
Then I bricked with PAC, restore with Matt's n such and settled again on PAC, and now I cant imagine life on 4.1.1 or 4.1.2, hence why I ask about the desire to keeps dual boot
Sent from my XT907 using xda app-developers app

Hey can you link those ROMs and some detailed instructions on that set up would much like to try it my self? Thanks!
Sent from my XT907 using xda premium

JDroidDeveloped23 said:
Hey can you link those ROMs and some detailed instructions on that set up would much like to try it my self? Thanks!
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
If you go to those ROM's particular threads you will see that on energy you have to set up with safe strap, and with PAC you been unlocked boot loader and just do a straight flash( instructions included on page) I haven't done it, bit I imagine you flash PAC FIRST and then add the safe strap app and tool and "duel boot" energy after.
Good luck!!!!
Sent from my XT907 using xda app-developers app

Kyles1329 said:
Ive had the XT907 Razr M VZW for about 6 months now. ICS came installed and JB officially came out a couple weeks after my purchuse. I have bricked and RSD this phone so many times Ive lost count. First three months of owning this phone I wanted to throw it off the tallest bridge I could find. Now with my phone unlocked and running SafeStrap v3.11 I am able to run Stock VZW 4.1.2 on my stock ROM with Energy ROM 3.14.13 build with VZW 4.1.1 running on my ROM Slot 2. Also im able to have the 4.1.1 camera work on Slot 2 while having the 4.1.2 camera in Stock ROM slot. Once I had both ROMs stable on SafeStrap I went ahead and flashed PacMan 4.2.2 over my Stock slot which was where I had the VZW 4.1.2 stock update running. Being able to now run two kernals through one recovery is bliss. Energy ROM to be is the best 4.1.1 rom out there hands down. Smooth flowing , heavy AOKP based rom that truely fixed my Wifi connection or lack of connection issues. And now I get to run PacMan 4.2.2 which is just straight gangster of a ROM. CM10.1 based ROM that takes the best of numerous ROM builds and apps, throw in crazy amount of customization, and you get pretty much Christmas morning joy of endless options. Long story short, finally got my Razr M to be the beast that I knew it always could be.
Click to expand...
Click to collapse
Is 4.2.2 giving you radio issues? I tried Slim Bean and wifi and 4G/3G REALLY dropped, which hurt batt life.

HighTechHobo said:
Is 4.2.2 giving you radio issues? I tried Slim Bean and wifi and 4G/3G REALLY dropped, which hurt batt life.
Click to expand...
Click to collapse
As far as 4g/ 3g goes, I have heard that you have to set network to lte/CDMA/evdo instead of the standard lte/CDMA.
Concerning WiFi...I don't know :-/
I think it is slim that messed up your network though, because I had to restore to 4.1.2 and then reflash after I lost it all from slim
Sent from my XT907 using xda app-developers app

Please delete

[Q] Question about GPS and RIL

I am using the new Oxygen JB 4.2.2 rom based on CM10.1 My problem is that I can't get GPS working. Any suggestions as to what I can do to fix that. Also will flashing the matching RIL for the RADIO I am using is that recommended on a CM 10.1 rom or not? Will it do any harm if I do flash the matching RIL?

heywheelie said:
I am using the new Oxygen JB 4.2.2 rom based on CM10.1 My problem is that I can't get GPS working. Any suggestions as to what I can do to fix that. Also will flashing the matching RIL for the RADIO I am using is that recommended on a CM 10.1 rom or not? Will it do any harm if I do flash the matching RIL?
Click to expand...
Click to collapse
RILs are only for pre-GB Sense ROMs.

ok thanks

[Q] Problem with T889 and 4.4 Roms....

Hi XDA Members,
I have an average understanding of rooted android devices and roms. I currently have a Tmobile Galaxy Note II (T0ltetmo)(T889) that is rooted. It has TWRP on it. I am running currently pacman rom (pac_t0ltetmo-4.3-20140128.zip) which works fine.
Here is the problem.... I am trying to upgrade to a Pacman Rom that is based on Android 4.4 which I have found. I installed the Pacman rom 4.4 & GAPPS stock 4.4 which works flawlessly, the only problem is..... My Radio doesn't work! I have my GSM Sim in and nothing comes up! Heres the thing aswell... I installed other roms that are based on 4.4 and the radio's doesn't work on any of those ROMs either, as soon as restore my other backups that are 4.3 the radio works.
What could be the problem? Is there something I am forgetting to do that the developers didn't tell me? Do I need to install something else that wasn't specified?
Please help!

Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk

pyr02k1 said:
Flash the newest kernel and modem if you haven't already. I noticed much the same when just testing 4.4 from a 4.1 rom.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
SOLVED! I flashed just the modem and everything was fine! Thank you.

help with installing pure perfomeance x cm version

i have a new question there is a rom called pure performance x cm version i need to know how to install when i go to install it does install when it reboots i go to the kit kat 4.4.2 again every time i am wanting to know how to install it on my samsung galaxy tab 3 7.0 smt210r the rom is for any device so can someone help me with this thanks

It's not an actual ROM. Its just some performance scripts to improve your ROM. I personally like it, and am using it on both stock 4.1.2 and the ported 4.4.2.
Sent from my MB886 using XDA Free mobile app

help
how did you do that can u tell me so i might be able to do the same thanks

Yeah. All you have to do is flash your ROM of choice, boot back to recovery, wipe cache and dalvik cache, then flash the pure performance zip and reboot. That's it. But, if you're flashing a stock based ROM, make sure you use the stock version.
Sent from my MB886 using XDA Free mobile app

help
so if i flashed 4.4.2 and boot in recovery and format the stuff in recovery and then flash the cm performance is that right

Are you using Gr8nole's cm11 or bensonhsu's 4.4.2 port?
Sent from my MB886 using XDA Free mobile app

help
i am using bensonhsu2008 witch one do i need to use

You'll need the one for stock
Sent from my MB886 using XDA Free mobile app

help
ok so i need Gr8nole's cm11 for stock

Jaykingis20 said:
ok so i need Gr8nole's cm11 for stock
Click to expand...
Click to collapse
The PurePerformance Mod has two versions, one for CM and one for Stock. If you're flashing Gr8nole's CM11 you'll want to use the CM version of Pure Performance. If you're flashing Bensonhsu's 4.4.2 port, you'll want to use the stock version of Pure performance.

help
where can i get the ported 4.4.2 at for the cm performance

Jaykingis20 said:
where can i get the ported 4.4.2 at for the cm performance
Click to expand...
Click to collapse
Okay, Gr8nole's CM11 is Cyanogenmod. Bensonhsu's port is simply a port of the t211 STOCK rom. PurePerformance MOD has two different versios. One made ONLY for Cyanogenmod based roms, and one ONLY for STOCK based roms. They cannot be used interchangeably. Therefore if you are flashing Bensonhsu's port, which is a STOCK rom, you'll need to use the STOCK version of PurePerforance MOD. Or, if you are flashing Gr8nole's CM11, you will need to use the CM version of PurePerformance MOD

help
bmatney said:
Okay, Gr8nole's CM11 is Cyanogenmod. Bensonhsu's port is simply a port of the t211 STOCK rom. PurePerformance MOD has two different versios. One made ONLY for Cyanogenmod based roms, and one ONLY for STOCK based roms. They cannot be used interchangeably. Therefore if you are flashing Bensonhsu's port, which is a STOCK rom, you'll need to use the STOCK version of PurePerforance MOD. Or, if you are flashing Gr8nole's CM11, you will need to use the CM version of PurePerformance MOD
Click to expand...
Click to collapse
i will use the stock then when i try to use Gr8nole's CM11 rom the kit kat version its a pre version i know the wifi and bluetooth and sound is not working but if that performance does what is says it does will it fix the wifi sound and bluetooth also can i install the gapps to go with Gr8nole's CM11 if i was to install that let me know

Jaykingis20 said:
i will use the stock then when i try to use Gr8nole's CM11 rom the kit kat version its a pre version i know the wifi and bluetooth and sound is not working but if that performance does what is says it does will it fix the wifi sound and bluetooth also can i install the gapps to go with Gr8nole's CM11 if i was to install that let me know
Click to expand...
Click to collapse
Are you serious? Stop trolling dude.
Sent from my MB886 using XDA Free mobile app

[Q] Bootloader question :)

I recently updated my N7105 to the recent 4.4.2 Nordic ROM ( n7105xxufnd3 )that was floating round that tripped my Knox, which I dont care about.
When i got sick of the updates abysmal battery life i flashed the latest stable release of CM for the GNII LTE a 4.3 based ROM with out issues.
But I'd like to know if i can revert back to my original ROM i.e. WanamLite MC3 V1.3, a TW 4.1.2 based ROM, for its spen support, battery life, atpx and boeffla sound support (im a big music listener) w/ Wanam's Adam Kernel.
Can i do this with out running into any issues, despite the gap between a 4.4.2 boot-loader (as I've been told i cant roll-back from this version) to a TW 4.1.2 ROM?
Thanks in advance guys

greyhamism said:
Can i do this with out running into any issues?
Click to expand...
Click to collapse
Based from what I remember, devs say that when you are with KK BL (ND3), you cannot flash a stock rom lower than it and the lowest custom rom that you can flash is 4.3.

Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
As awesome as CM is, there are touchwiz features specific to the note series that are hard to implement on CM/ASOP based ROMS :/

greyhamism said:
Is there anyway i can flash an older bootloader? and/or is there a similar ROM to Wanam's that uses 4.3 as its base?
Click to expand...
Click to collapse
Do not try to install anything lower as it will break device. I'm sorry, I know nothing about wanam lite.

I have a unrooted note 2, manually installed 4.4.2 as 4.3 had major battery issues.
Things got worse for me in 4.4.2 nordic countries and I went and downloaded the offical roms from sammobile and am now back on 4.1.1 offical.
It can be done.
Sent from my SM-T310 using XDA Free mobile app

hotkolbas said:
It can be done.
Click to expand...
Click to collapse
Wow, I thought once you are in a higher bootloader, you cannot install a lower one. No problems at all?
I'm sorry if I gave out wrong info, that was how I knew it was.

I have no issues at all.
Apart from missing out on features from 4.1.2 and above everything works as if I didnt update the device at all.
I would not do a restore from higher up android versions but if you start feom scratch its all good.
And I can say my zero lemon battery is working at it should be, I now have days worth of battery life.

I'm getting invalid kernel/ ramdisk size error on bootloader screen. This is the first time I got this error while entering recovery screen. I'm don't know much about this. Please help.
I have rooted Moto X (2013) running LiquidSmooth v 3.2
Sent from my Moto X using XDA Free mobile app

Sorry champ but this threqd is for a galaxy note 2 specifically a gt7105 and has installed a samsung stock rom, I have done this and have gone back to 4.1.1 but seeing as you have a rooted romed moto x it is out of my league.
I dare say this process is incompatible with the moto x and seeing as you can get into recovery or cwm or what ever its called you can still flash a rom with the relavent bootloader that was previous to your dilemma
Sent from my SM-T310 using XDA Free mobile app