Hi, I have P3300 with wifi. At home I have Ovislink 1120 as home wifi network. When I can connect with my p3300 I turn on the wifi and wait until the manager show "connect". After that I turn on ping application and see that first ten pings are about 3ms... next 10X about 200ms and next connection failed... Simply, my internet connection works only few seconds:-( .... 1120 works great!
I flashed an older fw to ovislink and it helped...
But I have another problem... When I am connected to the internet longer time (about 20min) my phone lost the mobile signal. There is only an icon, which show that phone is finding the signal. When I turn off wifi and wait about 5-10min the phone find out the signal. why?
Hi friends,
I have a terrible problem with my fine TouchPro2.
It constantly loses the wifi-connection. My old TouchPro1 never had these issues.
I have the actual HTC stockROM installed. Tried WiFiMonster - but again. After a few seconds it loses the connection.
Sometimes I'm able to download three, four mails, but then it breaks again :-(
Any idea?
re
To be more specific: WiFi goes off after 30 sec. or so. :-(
does wifi turn off? or simply disconnect? if it's disconnecting, first thing i'd do is reboot my router with wifi enabled on the phone and see if the connection improves. if wifi is physically turning off i'd guess it's an issue in the rom. maybe try another rom? and make sure wifi is set to "best performance" on phone.
Is this everywhere or on a specific router?
Does your connection drop after a certain activity (e.g. screen going into standby, opening a specific program, etc.)? Also, have you tried to backup your device and perform a hard reset?
Similar Problems
I've been having similar problems for about two weeks now.
I have tried several things like hard reset, soft reset, changing the rom, playing with the wireless connection and just about everything in the connection folder but no.
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection. However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
If anyone have any suggestion(s), I would greatly appreciated it.
solved...
Thx guys,
I performed a Hardreset and testet one by one the installed software... and found it: I installed a CommManager and it caused the WiFi-Problem :-(
thx
biddle said:
I my case, when I turn the wifi connection on through the comm. manager, it slows down the phone while its trying to connect and then it just goes off, leaving me with t-mo data connection.
Click to expand...
Click to collapse
What do you mean "slows down the phone"?
biddle said:
However, when I turn off data connections in comm. manager, it connects to the router and stays connected but it does nothing with the connection. Meaning, I am connected to the router, but somehow I won't be able to use the connections.
Click to expand...
Click to collapse
If your wifi connects but you cant get out, check to make sure you don't have the proxy box checked in connection settings. I have seen this box mysteriously become checked in the past.
Just a little comment
I will be getting TP2 very soon, but speaking of WiFi problems in general..
I had 3 phone: TyTN II, Samsung Omnia & iPhone 3g. only the TyTN could connect to WiFi at home while the other two can connect but will not get any data... however, they worked flawlessly in numerous other locations...
the problem was with my linksys router
apparently some older routers not compatible with the newer devices...
just wanted to share
Ok. As of today, it seems to be working, thanks for the help. However, I think it might have been my router. I think it had something to do with overheating because I put my modem on top of it. But the funny part was, everything, with the exception of my phone, was connecting. However, the connection was never really strong or reliable.
Anywho, thanks for the suggestion, even though it didnt really help me, I appreciate the gesture.
I had Garmin on my old Kaiser, and it never tried to connect to the internet, yet every time I start Garmin on my Tilt 2 it connects. I have set Garmin to "Never" connect, but it still continues to connect. Any suggestions? My primary concern is battery drain. If I manually disconnect from the internet after Garmin started, it doesn't reconnect. It's just a pain to have to disconnect every time I start Garmin. Garmin already drains the battery without the added drain of a data connection.
Is assisted GPS enabled in the stock Tilt 2 rom?
Perhaps if I use Advanced Config to disable aGPS, it might not connect every time I start Garmin.
try disabling traffic. and also anything else that sounds internet-y like google panoramio.
Fixed! I used Advanced Config 3.3 to disable aGPS
No longer automatically connects to data when Garmin starts.
volumnus said:
No longer automatically connects to data when Garmin starts.
Click to expand...
Click to collapse
Thanks alot volummus, I was looking through the internet looking to solve the same problem. Your post totally saved me .
Alright, so I've heavily tested this with a ton of bluetooth devices and 5 access points, both 5Ghz and 2.4Ghz.
When I have both wifi and bluetooth on, with the device connected to both services (both a BT device and an AP) neither radio works. WiFi says connected, but doesn't load anything, can't ping out at all. Bluetooth will find the device, connect, and disconnect within a few seconds.
I tested the same devices but only using one radio at a time and all the BT devices stay connected with WiFi off, and all APs are connected and load data with BT off.
Does anyone know what's going on? I've suspected this to be an issue since 4.0, but it's still around in 5.0.1. It's persistent across ROMs and RUUs, so it can't be a rom issue. Currently I'm on Viper 4.6.1, S-off, SCID (although this happened before I S-Off'd as well)
Does anyone else experience this issue? Any potential fixes?
I run into something similar periodically...
My 5ghz wifi always works no matter what.
2.4ghz / bluetooth will work for 2-3 days... then it stops... no 2.4ghz SSIDs show up in wifi and no bluetooth device will connect... Even turning BT/Wifi/Airplane on or off in any combo. Only a reboot will fix it.
My friend also started having this issue.
I've been all over and no one has a solution. I use an android wear device, so bluetooth is necessary :/
Hi, I've tried all the troubleshooting steps on how to fix wifi connection but it seems there's no luck.
I've already change the firmware but still no connection.
The problem is, I can connect to a wifi but it has no connection. It will only "saved,secured" and that's all.
Anyone can help?
Same issue here.
I'm starting to think that the eletronics trash can is the solution...
My Samsung Galaxy T-520 detects all Wi-Fi networks, but it doesn't connect to any. The status shows "saved, secured", but it fails to connect. I tried everything, switching on/off passpoints, bluetooth and whatever, even factory resets (twice). I also tried to start the device without the Google account, skipping everything. I also tried a cell phone access point, it's all useless. All my other devices work, so it's not the router. Maybe it's a hardware problem. It suddenly stopped working