Related
So this is kind of a unique issue i'm having. I have the I-747 on AT&T and flashed AOKP rom (it was taking too long to get JB). It worked for about 3 days and then got stuck in the android boot screen (used the rom feature to get rid of the pink unicorns). after that, I booted into recovery and reset my phone, and it worked again for a few more days, then it wouldnt boot again (I dont believe I changed any settings between the boots). After this time, it wouldnt let me boot into recovery and would only boot to the android start screen and stop. I used odin to flash the stock rom, which only took me to the 2nd samsung boot screen and stopped (after the AT&T splash shows up). I looked online and saw someone say try CF-root using odin, tried that and it didnt help. Then tried using a custom kernel siyah s3, and now it will only show the initial samsung splash screen before turning off again. Any suggestions here? I figured I'd stop researching since i dont want to really mess up my phone worse than it already is
mrneilix said:
So this is kind of a unique issue i'm having. I have the I-747 on AT&T and flashed AOKP rom (it was taking too long to get JB). It worked for about 3 days and then got stuck in the android boot screen (used the rom feature to get rid of the pink unicorns). after that, I booted into recovery and reset my phone, and it worked again for a few more days, then it wouldnt boot again (I dont believe I changed any settings between the boots). After this time, it wouldnt let me boot into recovery and would only boot to the android start screen and stop. I used odin to flash the stock rom, which only took me to the 2nd samsung boot screen and stopped (after the AT&T splash shows up). I looked online and saw someone say try CF-root using odin, tried that and it didnt help. Then tried using a custom kernel siyah s3, and now it will only show the initial samsung splash screen before turning off again. Any suggestions here? I figured I'd stop researching since i dont want to really mess up my phone worse than it already is
Click to expand...
Click to collapse
I have a similar issue, someone please help
Your main issue now is that you flashed siyah. We don't have one. If you can get to download mode, you will want to flash back to stock.
Sent from my SGH-I747 using xda premium
As DeathSdoor said...flash stock.
Sent from my SAMSUNG-SGH-I747
d3athsd00r said:
Your main issue now is that you flashed siyah. We don't have one. If you can get to download mode, you will want to flash back to stock.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Thanks guys! So I used odin to flash the stock boot loader and stock rom, but it is still hanging up on the 2nd samsung screen like it initially did (the one after the AT&T boot animation). Any other ideas on what could be the cause?
How long is the hang? Sure is just not the 1st initial boot of the new rom?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
blaker13 said:
How long is the hang? Sure is just not the 1st initial boot of the new rom?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
The first boot can take as long as 5 minutes sometimes. So, if you haven't waited that long, then try out some patience. Otherwise, try booting into recovery (stock now) and factory reset.
Sent from my SGH-I747 using xda premium
bump!
I have this same issue. I have restored to stock rom and it does the Samsung boot, then AT&T, then it goes to Samsung pulsating with a blue pulsating LED.
I have left it in that mode for at least 15 minutes and it never boots.
I can still get into download mode.
Thanks in advance for any help!
Has anyone tried booting into recovery after flashing the stock ROM and wiping caches then rebooting?
jethro650 said:
Has anyone tried booting into recovery after flashing the stock ROM and wiping caches then rebooting?
Click to expand...
Click to collapse
I let it run for 2 hours (left the house came back and i was still on. And phone wont boot into recovery at all ( i tried many times, but it just boots normally and skips recovery until it gets to the 2nd samsung screen, then stops there).
I dont know if this is relevant, but while the phone is off and plugged in, i can still see the battery meter and the Green LED (so i'm guessing it's still working, it just wont boot)
mrneilix said:
And phone wont boot into recovery at all ( i tried many times, but it just boots normally and skips recovery until it gets to the 2nd samsung screen, then stops there).
Click to expand...
Click to collapse
Same here!!!
jethro650 said:
Has anyone tried booting into recovery after flashing the stock ROM and wiping caches then rebooting?
Click to expand...
Click to collapse
As Jethro said clean everything and factory format in recovery. Your just not doing the buttons right to get in to recovery
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
blaker13 said:
As Jethro said clean everything and factory format in recovery. Your just not doing the buttons right to get in to recovery
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I went into recovery many times before, I'm definitely hitting the buttons right but it still wont go into recovery, it just tries booting like normal. I can go into download mode easily, but that's it.
jbizz, did you start getting this error after flashing AOKP rom also? trying to figure out what could have caused the issue in the first place
I'm not really skilled on these things, but I once had a similar issue with my phone not booting and had to end up using Kies to emergency restore it. Odin wouldn't recognize my phone but kies would.
Although I think my issue with odin may be stemming from my computers usb ports...
Sent from my SGH-I747 using XDA Premium HD app
I actually flashed a bad kernel and the phone wouldn't boot after that.
What is the proper way to boot into Stock Recovery?
Sent from my SAMSUNG-SGH-I777 using xda premium
Fixed it! What I did was go into Kies software and did a firmware upgrade instead of trying to flash from odin, then put it in download mode instead of recovery, but it still worked. Thanks for all the help, guys! guess it's time to move to a CM based rom?
mrneilix said:
Fixed it! What I did was go into Kies software and did a firmware upgrade instead of trying to flash from odin, then put it in download mode instead of recovery, but it still worked. Thanks for all the help, guys! guess it's time to move to a CM based rom?
Click to expand...
Click to collapse
Thats bad badassness! I will try that when I get home!
Sent from my SAMSUNG-SGH-I777 using xda premium
mrneilix:
Please give me step by step what you did! Kies is being a bastard!
Sent from my SAMSUNG-SGH-I777 using xda premium
jbizz said:
mrneilix:
Please give me step by step what you did! Kies is being a bastard!
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Sure, I'm doing this largely from memory since I mostly figured it out by throwing stuff at the wall to see what sticks.
Open Kies->tools->firmware upgrade and initialization->enter model name then serial number (they're behind the battery) -> put the phone in download mode and plug it in. it should take care of the rest.
Fair warning, this will fully wipe your phone, i lost all my pics (thank you google+'s instant upload or i'd be PISSED) and titanium backup (there goes my 3 stars on every level in angry birds and great scores in temple run), but at least you get a phone that can function as more than a paper weight, right?
mrneilix:
You're my new best friend and I don't even know you!!!
Thanks for the help, you're a legend!
Sent from my SAMSUNG-SGH-I747 using xda premium
Hi I have a Tmobile Galaxy s2 I was rooting my phone, following step by step to download mode to CWM recovery mode. i was following GalaxyS2Root.com every step, so what i did was in CWM recovery mode an install tmobilegalaxys2root.zip, it work but onto i have to Titanium Backup app to root it. Titanium Backup app did not work, did no see root. So i went back to CWM recovery an install SuperSU.zip. It was installing but when the phone turn off to reboot, It did not turn back on, I hold the power button, hold Volume buttons an power button, Still nothing
Please help??????
I have the same problem and really need some help. The phone won't turn on no matter what I try. I was trying to update a nightly rom and kernel to 4.2.2 and gapps. So I selected all 3 files, when it got to the gapps install, it wasn't installing gapps, I must have clicked a different folder by mistake. It said update.zip
The phone then said It was updating to clockwork mod from twrp. I was using TWRP and I'm sure this is what caused this problem. Is my phone bricked? What can I do?
eleazargray said:
I have the same problem and really need some help. The phone won't turn on no matter what I try. I was trying to update a nightly rom and kernel to 4.2.2 and gapps. So I selected all 3 files, when it got to the gapps install, it wasn't installing gapps, I must have clicked a different folder by mistake. It said update.zip
The phone then said It was updating to clockwork mod from twrp. I was using TWRP and I'm sure this is what caused this problem. Is my phone bricked? What can I do?
Click to expand...
Click to collapse
Same thing happen to me you might have to get into download mode and restore from there. I flashed twrp over cwm one time and my phone would not boot so i got into download mode and fixed it.
Sent from my SGH-T989 using Tapatalk
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
GTS02GA said:
Hi I have a Tmobile Galaxy s2 I was rooting my phone, following step by step to download mode to CWM recovery mode. i was following GalaxyS2Root.com every step, so what i did was in CWM recovery mode an install tmobilegalaxys2root.zip, it work but onto i have to Titanium Backup app to root it. Titanium Backup app did not work, did no see root. So i went back to CWM recovery an install SuperSU.zip. It was installing but when the phone turn off to reboot, It did not turn back on, I hold the power button, hold Volume buttons an power button, Still nothing
Please help??????
Click to expand...
Click to collapse
Does anything show up at all? Even a white line across the screen when you try to turn it on? If you can't get into recovery get into download mode and it can be fixed.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
Same thing happen to me you might have to get into download mode and restore from there. I flashed twrp over cwm one time and my phone would not boot so i got into download mode and fixed it.
Sent from my SGH-T989 using Tapatalk
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Does anything show up at all? Even a white line across the screen when you try to turn it on? If you can't get into recovery get into download mode and it can be fixed.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Problem is I can't even get into download mode. Nothing happens when I plug it in. Nothing shows on screen. It's completely dead..
Am i screwed?
You can buy a usb download jig for 5 bucks on amazon or ebay it will put your phone in download mode automatically if its not fried. By the way how did you try to get into download mode?
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
You can buy a usb download jig for 5 bucks on amazon or ebay it will put your phone in download mode automatically if its not fried. By the way how did you try to get into download mode?
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Yea i just ordered a Jig. I took out the battery, held the vol+ and - and then plugged in the usb to computer. But nothing happened. I waited a good minute.
Hopefully the jig saves me. If not are there any other options? Should I sell the phone for parts?
What does computer say when the phone is plugged in? If it says QHS_USB_DOWNLOAD that is not good at all. You can try mobiletechvideos site they fix alot of bricks. But yeah if you have to you can sell the parts . People on craigslist sell them all the time and there is places like usell.com that buy them. If you have a warranty you can send it in and just say you received a notice to update and when you did it never booted again.
Sent from my SGH-T989 using Tapatalk
richardlibeau said:
What does computer say when the phone is plugged in? If it says QHS_USB_DOWNLOAD that is not good at all. You can try mobiletechvideos site they fix alot of bricks. But yeah if you have to you can sell the parts . People on craigslist sell them all the time and there is places like usell.com that buy them. If you have a warranty you can send it in and just say you received a notice to update and when you did it never booted again.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Nothing at all happens. Its completely dead. Ill await the jig and report back with results.
eleazargray said:
Nothing at all happens. Its completely dead. Ill await the jig and report back with results.
Click to expand...
Click to collapse
Hope you get lucky with the jig.
Sent from my SGH-T989 using Tapatalk
Just send it back for warranty
Tmobile
Sent from my SGH-T989 using Tapatalk 2
Hi
My galaxy note 2 is stuck on the boot screen Samsung galaxy note 2 gt n7100.
I had tried 11 times flashing a recovery (cwm and twrp) onto the device, but every time when it rebooted after flashing with odin i could see some light brown lines flickering fast on the screen and then it would boot into my stock android system. Then i downloaded goomanager and could from there boot into recovery then i got into a cwm recovery. So i installed a custom rom (slimbean) and now i tried again to flash a cwm onto the device hoping it would work normally but now i am stuck on the galaxy boot screen.
I can get into the stockk android recovery when pushing power, home and vol down.
What should i do?
I tried several times flashing different recvories, and got into the philz touch one once, and then im back at where i started, it seems like it wont let me get into a custom recovery mode.
Can my phone be locked in any way?? Since every time i try to flash a custom recovery and then enter it but pressing the buttons it just puts me back to the stock recovery.
When you get into the Recovery Mode, do a format/clean cache
I have now managed to install cm 10.1 and gapps, now my problem is i dont get any cell signal and there is an error when searching for carriers.
My IMEI is unknown which i think might be a problem but what should i do?
I have no idea what to do mow, can someone please pointm e in the right direction?
Using my old laggy zte blade now and its killing me!
antton93 said:
I have now managed to install cm 10.1 and gapps, now my problem is i dont get any cell signal and there is an error when searching for carriers.
My IMEI is unknown which i think might be a problem but what should i do?
Click to expand...
Click to collapse
If you have a n7100 did you do a efs folder backup like the instructions and tutorials say to do..
Sent from my GT-N7105 using xda premium
---------- Post added at 05:10 PM ---------- Previous post was at 04:52 PM ----------
bearusa said:
If you have a n7100 did you do a efs folder backup like the instructions and tutorials say to do..
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Here are the guidelines. It clearly states to root your device first. Then take a EFS backup.
http://forum.xda-developers.com/showthread.php?p=40172458
Sent from my GT-N7105 using xda premium
No i dont have an EFS backup thats the problem.
I flashed stock firmware and everything on the phone, got it running.
My imei is the standard 0049 from corrupted imei?
So is there not anything i can do to like write my imei into some file?
I did this with a hex editor on my zte blade and then flashed the file to my phone and it worked but there is no such solution for the n7100?
Before you wipe and erase everything, try to figure out what's causing the overlook. ADB logcat and log files can help.
SenK9 said:
Before you wipe and erase everything, try to figure out what's causing the overlook. ADB logcat and log files can help.
Click to expand...
Click to collapse
I dont understand you now, what overlook?
Sorry, boot loop. Damn autocorrect.
SenK9 said:
Sorry, boot loop. Damn autocorrect.
Click to expand...
Click to collapse
I have managed to flash the phone with a stock firmware and everything and its working fine now except the wrong imei..
Hi Guys,
So I have a Samsung Galaxy Note 2 that as of 5 hours ago was completely stock and running android 4.3 (the official one from AT&T). I got bored last night and decided I wanted to root my phone (something I hadn't yet done in the entire year I had my phone). So I looked up how to root, read the instructions all the way (I thought my research was complete). I rooted using the CF auto method. After doing that I flashed TWRP using ODIN. I also downloaded Titanium Backup, Rom Manager & My Backup Root. I tried to use all three of these applications to make a backup of my device so that I could flash the custom Rom I wanted without losing all my information. That is when my troubles began.
Whenever I tried to access any of these apps I got a pop up saying Unfortunately, SuperSU has stopped and a notification stating An attempt to access a secure area on your phone without authorization has been blocked. None of the apps would run either and just kept freezing or loading forever.Thinking I'd done something wrong I repeated the root process all over again. I still kept getting the same notifications though. I typed in the unauthorized access notification message into google and discovered about Knox. Doing some tinkering of my own I went to settings (more tab)>>security>>device administrators>> unchecked knox>>deactivate. After deactivating Knox I once again tried to gain root access and had no success. I followed the advice from previous threads and tried to change all Knox.apk files to knox.apk.bak using Explorer, I downloaded Android terminal and tried to delete knox via the command line su pm... That also did nothing. I went to the market and tried to download the SuperSU app by CHAINFIRE, it wouldn't work as it already says the app is installed but offers me no updating options. I also downloaded the Update SuperSU zip file and tried to flash it. My phone wont boot into recovery though so that hasn't gotten me anywhere. Downloaded Rom Manager and GooManager to try to get into recovery mode and still no success. later flashed philz_touch via ODIN as people who had similar problems had posted about it working for them. Didn't work for me. Flashed TWRP again using ODIN and am now just scratching my head trying to figure out how to fix this issue.
I'm personally not worried much about the warranty stuff but am more concerned with the fact that I can't root my phone. All I want is to be able to load a custom rom (MIUI v5) onto my phone. Any and all help would be greatly appreciated.... If you've seen someone else with an issue like mine please just redirect me to the proper thread then.
p.s. I also tried running the root verify app and it got stuck on a loading page.
When I power my phone off and boot into recovery mode (or whatever its called) my stats read as:
ODIN MODE
Product name: SGH-I317
Custom Binary Download: Yes (7 counts) - this is from all my attempts to reroot and flash different recoveries
Current Binary: Custom
System Status: Custom
Knox Warranty Void: 1
AP SWAEV: A2
Not sure if it matters but my phone still works fine and I can make and recieve calls, texts, etc so it doesn't seem like anything is "broken." Just no root access on a rooted phone.
Originally Posted by Ladyfinesse08
Thanks so much for your help. I tried doing what you said. When I go to SuperSU application under application manager it won't allow me to reomove it. All I can do is Turn it OFF. When If I go to the play market after turning it off the only option I get is to enable it again. Looking under App Info though it's showing that I'm on version 1.93 of SuperSu. I think from all the stuff I've been reading I'm supposed to be on version 1.95.
As for flashing it your TWRP I can't because I can't load into recovery mode with TWRP. The only thing thats working for me is ODIN. Not sure if there's a way to flash from ODIN or not but I personally don't know of one (I'm new to ODIN).
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
Here's a copy to flash in ODIN. If you can't boot into recovery after this, there are other things we can try from ODIN.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
Originally Posted by Ladyfinesse08
Thanks so much for your help. I tried doing what you said. When I go to SuperSU application under application manager it won't allow me to reomove it. All I can do is Turn it OFF. When If I go to the play market after turning it off the only option I get is to enable it again. Looking under App Info though it's showing that I'm on version 1.93 of SuperSu. I think from all the stuff I've been reading I'm supposed to be on version 1.95.
As for flashing it your TWRP I can't because I can't load into recovery mode with TWRP. The only thing thats working for me is ODIN. Not sure if there's a way to flash from ODIN or not but I personally don't know of one (I'm new to ODIN).
http://goo.im/devs/OpenRecovery/t0lt...lteatt.img.tar
Here's a copy to flash in ODIN. If you can't boot into recovery after this, there are other things we can try from ODIN.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Fixed it. I was being special :angel:
Ladyfinesse08 said:
it's saying the file you've requested is not found. Do you have another link for the file or whats the name of it so I can search for it myself?
Click to expand...
Click to collapse
http://teamw.in/project/twrp2/124
Should be main TWRP ATT page
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
Ladyfinesse08 said:
Fixed it. I was being special :angel:
Click to expand...
Click to collapse
fixed the link or completely whooped root's butt?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
http://teamw.in/project/twrp2/124
Should be main TWRP ATT page
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 08:59 PM ---------- Previous post was at 08:47 PM ----------
fixed the link or completely whooped root's butt?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the link. the tar file is the same one that I've been using though so not sure if it'll work or not. When flashing it should I still be under PDA or should I switch to phone, csc, etc?
Ladyfinesse08 said:
the link. the tar file is the same one that I've been using though so not sure if it'll work or not. When flashing it should I still be under PDA or should I switch to phone, csc, etc?
Click to expand...
Click to collapse
Yep PDA.
Which version of ODIN you using?
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
v.3.07
Ladyfinesse08 said:
v.3.07
Click to expand...
Click to collapse
K. Should work.
2.6.3.0 will also.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/t0lteatt
Philz ClockWorkMod recovery
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I flashed the first recovery file but it still won't boot into recovery for me. When I try to boot into recovery it keeps taking me to the default recovery screen. Tried launching titantium backup and what not again and they're all still not working for me.
Got the philztouch one to flash. Still won't boot into custom recovery though.
Ladyfinesse08 said:
I flashed the first recovery file but it still won't boot into recovery for me. When I try to boot into recovery it keeps taking me to the default recovery screen. Tried launching titantium backup and what not again and they're all still not working for me.
Got the philztouch one to flash. Still won't boot into custom recovery though.
Click to expand...
Click to collapse
K. Try this. 69% sure it will work.
- Download from http://d-h.st/CDK
I317UCUBMK6-TZ-PARAM.zip
- Extract the .zip file to get to I317UCUBMK6-TZ-PARAM.tar.md5
- Put your Note 2 in Download Mode.
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Open ODIN and place the I317UCUBMK6-TZ.tar.md5 file in PDA and flash.
I know you know how to do all that's written there, I just copied and pasted from a post.
dicksteele said:
K. Try this. 69% sure it will work.
- Download from http://d-h.st/CDK
I317UCUBMK6-TZ-PARAM.zip
- Extract the .zip file to get to I317UCUBMK6-TZ-PARAM.tar.md5
- Put your Note 2 in Download Mode.
Entering download mode is very simple. First you will need to turn off your device. Once it’s off, you need to press this button combination: volume down, power button and home button. Keep them pressed until the download mode shows up. Once you’re there, you will be required to press volume up to enter the download mode or volume down to cancel and reboot the device.
Open ODIN and place the I317UCUBMK6-TZ.tar.md5 file in PDA and flash.
I know you know how to do all that's written there, I just copied and pasted from a post.
Click to expand...
Click to collapse
This didn't work for me either. Not sure exactly what's wrong with my note but I may just have to give up on gaining root access. maybe i'll try a different method to root.... I'm 100% sure I'm rooted though based on what the phone says when I boot into the default system recovery. Just don't understand why I can't gain root access and boot into custom recovery. Thank you for all your help though you've been an absolute doll. :angel:
Ladyfinesse08 said:
This didn't work for me either. Not sure exactly what's wrong with my note but I may just have to give up on gaining root access. maybe i'll try a different method to root.... I'm 100% sure I'm rooted though based on what the phone says when I boot into the default system recovery. Just don't understand why I can't gain root access and boot into custom recovery. Thank you for all your help though you've been an absolute doll. :angel:
Click to expand...
Click to collapse
No worries. I aim to please.
You aren't the first this has happened to. Just trying to remember what I did. I know what I did to fix it, I think it's this version though.
Download and try this one
http://d-h.st/OYC
It's the MK4 version of the earlier param/tz you tried.
That should have worked, clueless why it didn't.
...
ODIN this one, let it reboot back into ROM.
Power down, go into download mode and flash either one of the custom recoveries.
Let it reboot, power down, then try and go into recovery.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
No worries. I aim to please.
You aren't the first this has happened to. Just trying to remember what I did. I know what I did to fix it, I think it's this version though.
Download and try this one
http://d-h.st/OYC
It's the MK4 version of the earlier param/tz you tried.
That should have worked, clueless why it didn't.
...
ODIN this one, let it reboot back into ROM.
Power down, go into download mode and flash either one of the custom recoveries.
Let it reboot, power down, then try and go into recovery.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It seems my life has become a horrible case of Murphy's Law (as far as rooting this dang phone goes). So I used the 4.3param_tz.tar file that you posted previously. After being flashed via ODIN my phone automatically booted into Philz Touch recovery more. I initially decided that I was going to flash the SuperSU update then but decided to wait as I wanted to follow the instructions completely and flash TWRP instead. rebooted the phone. Turned it off again and booted back into recovery..... I was once again met with the default stock recovery (I thought my problems were solved and was already half way through writing a post to you confessing my love).
At this point I proceeded with some caution and tried to flash TWRP. Didn't work. ODIN/my phone kept getting stuck in recovery.img. Disconnected the phone after a couple minutes, pulled the battery and rebooted into stock recovery mode. Once again ODIN/my phone got stuck on recovery mode. Tried flashing 4.3param_tz.tar again and this time got stuck at param.bin.
Did some Google searching and people recommended re-installing the drivers, re-installed device drivers and rebooted into stock recovery mode. Went back to ODIN and flashed TWRP. It flashed completely and automatically rebooted the device. When I turned the device off again and tried to go to recovery mode I was again taken to the stock recovery mode page. tried to reflash 4.3param_tz.tar and it got stuck on param.bin again. Since then I've unplugged and rebooted into recovery mode countless times and tried flashing any and every thing and I keep getting stuck at either param.bin or recovery.img.
I have to go to class now so I'll probably come back sometime tonight and try to re-install the drivers and see if I can get param to flash again. If you give up completely I understand. The longer this takes the more convinced I am that it's a sign from above that I simply need to get my ass a new phone.
Ladyfinesse08 said:
It seems my life has become a horrible case of Murphy's Law (as far as rooting this dang phone goes). So I used the 4.3param_tz.tar file that you posted previously. After being flashed via ODIN my phone automatically booted into Philz Touch recovery more. I initially decided that I was going to flash the SuperSU update then but decided to wait as I wanted to follow the instructions completely and flash TWRP instead. rebooted the phone. Turned it off again and booted back into recovery..... I was once again met with the default stock recovery (I thought my problems were solved and was already half way through writing a post to you confessing my love).
At this point I proceeded with some caution and tried to flash TWRP. Didn't work. ODIN/my phone kept getting stuck in recovery.img. Disconnected the phone after a couple minutes, pulled the battery and rebooted into stock recovery mode. Once again ODIN/my phone got stuck on recovery mode. Tried flashing 4.3param_tz.tar again and this time got stuck at param.bin.
Did some Google searching and people recommended re-installing the drivers, re-installed device drivers and rebooted into stock recovery mode. Went back to ODIN and flashed TWRP. It flashed completely and automatically rebooted the device. When I turned the device off again and tried to go to recovery mode I was again taken to the stock recovery mode page. tried to reflash 4.3param_tz.tar and it got stuck on param.bin again. Since then I've unplugged and rebooted into recovery mode countless times and tried flashing any and every thing and I keep getting stuck at either param.bin or recovery.img.
I have to go to class now so I'll probably come back sometime tonight and try to re-install the drivers and see if I can get param to flash again. If you give up completely I understand. The longer this takes the more convinced I am that it's a sign from above that I simply need to get my ass a new phone.
Click to expand...
Click to collapse
Hmmm. Maybe it's my fault.
That's my last name for reals.
So the param/tz you flashed I previously posted, was the first one or second one?
Try flashing the first param.bin/tz.img combo.
Sorry for the run around.
My fault again. When i posted the Philz recovery I should have mentioned either one would have been fine.
For the custom recovery, it gets down to personal preference. Both versions are working fine. They both are touch. You are just going to have to play with both and see which one trips your trigger.
I'm getting lost where we are at.
Try flashing the original param file from the 4.3 OTA. Let's see if that completes successfully. Then we'll go from there.
I'm thinking
-Fix booting into stock recovery.
-Do chainfires CF-AUTOROOT in ODIN.
-Boot phone and try updating Supersu again
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
I'm in the same boat this person is in, and i was about to open a new thread. I hope you don't mine joining in for help. My husband was a ninny and accepted the full OTA when I only told him to swap over his cards into the new warranty exchange we just got in. So I didn't know about it until I started trying to root and running into problems. I ran the TZ.tar.md5 file in Odin. I tried this little method here mentioned here: http://forum.xda-developers.com/showthread.php?p=50532028. I can't get anything to happen other than watching the flash counter go up. I just want root so i can restore his app with Rom Toolbox from his other phone...... This Knox thing is BS......
whitetiger_0603 said:
I'm in the same boat this person is in, and i was about to open a new thread. I hope you don't mine joining in for help. My husband was a ninny and accepted the full OTA when I only told him to swap over his cards into the new warranty exchange we just got in. So I didn't know about it until I started trying to root and running into problems. I ran the TZ.tar.md5 file in Odin. I tried this little method here mentioned here: http://forum.xda-developers.com/showthread.php?p=50532028. I can't get anything to happen other than watching the flash counter go up. I just want root so i can restore his app with Rom Toolbox from his other phone...... This Knox thing is BS......
Click to expand...
Click to collapse
A ninny. Something my wife has never called me I'll have to admit. Don't think she's ever considered that, I'll have to confirm that.
Back to work.... what does can't get anything else to work mean?
So what have you did? Any of the steps listed above?
We haven't heard from LadyF so assuming she's good to go. No reason to open another can't root thread.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
dicksteele said:
A ninny. Something my wife has never called me I'll have to admit. Don't think she's ever considered that, I'll have to confirm that.
Back to work.... what does can't get anything else to work mean?
So what have you did? Any of the steps listed above?
We haven't heard from LadyF so assuming she's good to go. No reason to open another can't root thread.
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for getting back to me. I tried the CF Auto Root file in Odin. I tried just flashing a custom recovery so I could flash SU to gain root. Those are the 2 main things I remember trying..the rest is a late night blur. I was going to just try and flash one of the rooted stock roms, however, and this is kinda' sad, I don't remember which spot to place it in Odin.
whitetiger_0603 said:
Thanks for getting back to me. I tried the CF Auto Root file in Odin. I tried just flashing a custom recovery so I could flash SU to gain root. Those are the 2 main things I remember trying..the rest is a late night blur. I was going to just try and flash one of the rooted stock roms, however, and this is kinda' sad, I don't remember which spot to place it in Odin.
Click to expand...
Click to collapse
Just PM'd you all the goodies.
dicksteele said:
Just PM'd you all the goodies.
Click to expand...
Click to collapse
I appreciate your time helping me. Things are up and running.
Hello all,
previous searches have yielded limited answers so I apologize if this has been answered already.
I've been running CM for the past 5 or 6 months and have had zero problems with it. Last week however something happened and I got stuck in a boot loop. Me being a genius obviously didn't make a backup of anything so I flashed the stock rom via odin back onto the phone. After flash through odin I get the green light and pass indication. I go to restart the phone in recovery and I get the sick droid with the red yield sign above him. I then go to wipe/factory reset then reboot and it goes as far as the Samsung logo doing its animation and then stops just after and freezes. A regular power up without going into recovery first results in a boot loop.
I tried the recovery process through Kies and get the "This devices version cannot be updated" error. I am running the current version of Kies. I'm assuming its because it knows I've been rooted?
Note 2 Sprint
thank you in advance.
Rhett
eshleman said:
Hello all,
previous searches have yielded limited answers so I apologize if this has been answered already.
I've been running CM for the past 5 or 6 months and have had zero problems with it. Last week however something happened and I got stuck in a boot loop. Me being a genius obviously didn't make a backup of anything so I flashed the stock rom via odin back onto the phone. After flash through odin I get the green light and pass indication. I go to restart the phone in recovery and I get the sick droid with the red yield sign above him. I then go to wipe/factory reset then reboot and it goes as far as the Samsung logo doing its animation and then stops just after and freezes. A regular power up without going into recovery first results in a boot loop.
I tried the recovery process through Kies and get the "This devices version cannot be updated" error. I am running the current version of Kies. I'm assuming its because it knows I've been rooted?
Note 2 Sprint
thank you in advance.
Rhett
Click to expand...
Click to collapse
Which stock version did you flash through odin? Mc2, mk4, or ne2?
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
Which stock version did you flash through odin? Mc2, mk4, or ne2?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ne2
I dont think kies has NE2 yet so you can only use odin. Boot into recovery (stock is fine) and do a factory reset. Then power off (do not reboot) and go into download mode and flash ne2 tar again through odin. Then hopefully you will be able to boot. Note that 4.4.2 is a large rom and will take around 5 mins to actually boot up.
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
I dont think kies has NE2 yet so you can only use odin. Boot into recovery (stock is fine) and do a factory reset. Then power off (do not reboot) and go into download mode and flash ne2 tar again through odin. Then hopefully you will be able to boot. Note that 4.4.2 is a large rom and will take around 5 mins to actually boot up.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for the response,
When I go to wipe/reset I get the dead android with the red triangle. I am assuming there is a fault in my stock recovery. I still went ahead and wiped/reset data and removed battery after, waited a few minutes, inserted battery, booted into download mode, flashed stock ne2, everything with odin passed. I booted phone up and it immediately went into a boot loop with the samsung logo for about 5 minutes then shut off completely. the battery has a full charge.
I'm open for other options if some are available.Would it be possible to skip the stock recovery and go straight into a custom recovery? I'm planning on rooting and installing CM again but obviously making a backup this time.
eshleman said:
Thank you for the response,
When I go to wipe/reset I get the dead android with the red triangle. I am assuming there is a fault in my stock recovery. I still went ahead and wiped/reset data and removed battery after, waited a few minutes, inserted battery, booted into download mode, flashed stock ne2, everything with odin passed. I booted phone up and it immediately went into a boot loop with the samsung logo for about 5 minutes then shut off completely. the battery has a full charge.
I'm open for other options if some are available.Would it be possible to skip the stock recovery and go straight into a custom recovery? I'm planning on rooting and installing CM again but obviously making a backup this time.
Click to expand...
Click to collapse
Use odin to flash philz touch recovery 6.0.7.9.
Sent from my SPH-L900 using XDA Free mobile app
skye206 said:
Use odin to flash philz touch recovery 6.0.7.9.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
Like he said use odin to flash philz 6.07.9 but uncheck reboot option. Once everything is done disconnect and pull battery (this is safe as long as everything finished flashing). Then do recovery key sequence while inserting battery. Then flash your rom. If still having issues with booting I have a special file that you can odin that should fix it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Like he said use odin to flash philz 6.07.9 but uncheck reboot option. Once everything is done disconnect and pull battery (this is safe as long as everything finished flashing). Then do recovery key sequence while inserting battery. Then flash your rom. If still having issues with booting I have a special file that you can odin that should fix it.
I downloaded the 6.07.09 philz zip file, however I'm having trouble finding the tar.md5 file to flash through odin.
Also, once philz touch recovery is installed can I immediately flash a recent version of CM11 nightly straight from my external SD card?
Thank you,
Rhett
Click to expand...
Click to collapse
Here is a direct link to 6.07.9 tar.md5 https://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/philz_touch_6.07.9-l900.tar.md5/
Once you flash it boot into recovery and flash cm11. If cm11 wont boot I have another file for you to use but it is only needed if cm11 does not boot.
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
Here is a direct link to 6.07.9 tar.md5 https://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/philz_touch_6.07.9-l900.tar.md5/
Once you flash it boot into recovery and flash cm11. If cm11 wont boot I have another file for you to use but it is only needed if cm11 does not boot.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I really appreciate the help,
I successfully flashed Philz recovery through odin. Booted to recovery and went to wipe/reset for a new rom, then installed zip - CM11 (yesterday's version) flashed successfully, selected reboot, samsung logo flashed and then phone shut off.
Am I rooted automatically if I have Philz recovery? They only thing I can think of is I don't have an OS at all on my device or I am not rooted?
Thank you in advance
eshleman said:
I really appreciate the help,
I successfully flashed Philz recovery through odin. Booted to recovery and went to wipe/reset for a new rom, then installed zip - CM11 (yesterday's version) flashed successfully, selected reboot, samsung logo flashed and then phone shut off.
Am I rooted automatically if I have Philz recovery? They only thing I can think of is I don't have an OS at all on my device or I am not rooted?
Thank you in advance
Click to expand...
Click to collapse
Yeah kind of thought that might happen. Flash the attachment from this (fix.tar) http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287 through odin and it should fix your issue. Also you are not rooted automatically because of Philz. Root is controlled by the rom but almost every custom rom (omni excluded) comes rooted so hope that helps that question.
jlmancuso said:
Yeah kind of thought that might happen. Flash the attachment from this (fix.tar) http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287 through odin and it should fix your issue. Also you are not rooted automatically because of Philz. Root is controlled by the rom but almost every custom rom (omni excluded) comes rooted so hope that helps that question.
Click to expand...
Click to collapse
I'm assuming the fix.tar changes the recovery to CWM? I flashed the fix zip successfully, rebooted, CM logo came on for a couple minutes, I did a happy dance, then the phone shut off again. Pulled battery, turned back on and its stuck in a boot loop now with samsung logo.
eshleman said:
I'm assuming the fix.tar changes the recovery to CWM? I flashed the fix zip successfully, rebooted, CM logo came on for a couple minutes, I did a happy dance, then the phone shut off again. Pulled battery, turned back on and its stuck in a boot loop now with samsung logo.
Click to expand...
Click to collapse
Do a factory reset (normal not clean for new rom) and see what happens.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
Do a factory reset (normal not clean for new rom) and see what happens.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I flashed the fix.tar. it changed the recovery to CWM which only gives me the option to wipe data/factory reset, whereas with the philz I had the option to wipe for just a new rom. or a complete reset
Good then you can mix them up. Do the factory reset. Also you sure it is cwm or is it the stock recovery? I have not used that file since 4.4.2 came out but thought it was all stock.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
Good then you can mix them up. Do the factory reset. Also you sure it is cwm or is it the stock recovery? I have not used that file since 4.4.2 came out but thought it was all stock.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, after the fix.tar flash the recovery changed to CWM. However, I'm still having no luck. I tried system wipe/restore then reboot but the phone boots to samsung logo then shuts off. Ill go over the steps I've taken again.
1. Flashed stock recovery through odin - got red triangle above dead android. I'm assuming problem with stock recovery
2. Flashed Philz recovery through odin - did factory reset, flashed current version of CM11, boot, samsung logo comes on then phone shuts off.
3. Flashed fix.tar. through odin.- boot, CM logo comes on like its booting for a minute, then phone shuts off, pull battery, restart phone then goes into a boot loop. wipe data does the same thing. After a couple times of that I'm now at a point where when I reboot from recovery it goes straight to samsung logo then shuts off. Holding the power button (like a regular startup) does nothing. The phone is only responsive to recovery mode and download mode. Not to mention the phone has to be plugged in to either the computer or the wall for any of this to work. Even though the battery indicator says the charge is at 100%.
eshleman said:
Yes, after the fix.tar flash the recovery changed to CWM. However, I'm still having no luck. I tried system wipe/restore then reboot but the phone boots to samsung logo then shuts off. Ill go over the steps I've taken again.
1. Flashed stock recovery through odin - got red triangle above dead android. I'm assuming problem with stock recovery
2. Flashed Philz recovery through odin - did factory reset, flashed current version of CM11, boot, samsung logo comes on then phone shuts off.
3. Flashed fix.tar. through odin.- boot, CM logo comes on like its booting for a minute, then phone shuts off, pull battery, restart phone then goes into a boot loop. wipe data does the same thing. After a couple times of that I'm now at a point where when I reboot from recovery it goes straight to samsung logo then shuts off. Holding the power button (like a regular startup) does nothing. The phone is only responsive to recovery mode and download mode. Not to mention the phone has to be plugged in to either the computer or the wall for any of this to work. Even though the battery indicator says the charge is at 100%.
Click to expand...
Click to collapse
So you can not run on battery power at all? Sounding like a hardware issue. If you know someone else with a note 2 I would try swapping batteries. After that I am not sure what to try.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
So you can not run on battery power at all? Sounding like a hardware issue. If you know someone else with a note 2 I would try swapping batteries. After that I am not sure what to try.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have a friend that also has a note 2, I'll try his battery this weekend and let you know what happens. Thanks again for all the help.
eshleman said:
I have a friend that also has a note 2, I'll try his battery this weekend and let you know what happens. Thanks again for all the help.
Click to expand...
Click to collapse
A different battery didn't help. I reflashed the stock rom, where I get the original problem of the red exclamation point laying down android screen. Is there a way to rid the download screen of the system status as being displayed as "custom" and the knox warranty void: as 1 with the condition the phone is in? I believe if I can reset the counter and prove it is a hardware problem they will cover it under warranty. If not I believe my only option is to destroy/crush the phone beyond repair and claim the insurance which is $200 to replace the phone.
Can you post the link where you got the stock rom?
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2