Related
Hi guys!
I haven't yet rooted my Desire(I would have but I was fool enough to install the 2.2 OTA).The main reason for me to root would be the ability to overclock my device.All this time that I have been around here on the Desire and Nexus One forums I have been seeing that our devices are overclocked only up to 1113MHz and only in very rare cases 1267MHz.However,to my great surprise,I noticed on OpenDesire ROM's thread that the Desire can be overclocked @1344MHz(which of course made me think a big HELL YEAH!).Is that number ok for all of us or for some select few?I remember from my Hero days that only some few,lucky guys like myself could overclock up to 768MHz,although there were cases of people,rare,yet not unheard of,that could overclock @844MHz.Is this the case here or are things different with the Snapdragon?
Many many thanks guys!
C'mon guys,no one?
tolis626 said:
I have been seeing that our devices are overclocked only up to 1113MHz and only in very rare cases 1267MHz.
Click to expand...
Click to collapse
I don't think overclocking to 1267MHz happens in rare cases. I had no problems oc-ing to 1267 and it seems that a lot of forum member were able to do this too.
Why don't you downgrade your HBoot to 0.80, root your phone and try it out?
Just make sure your phone does not become too hot if you try 1344MHz.
I have to ask the question, but does it really matter?
IMHO, the Desire is plenty fast enough that overclocking it simply isn't necessary.
I can understand underclocking to eek out more battery life, but other than gaining a few points on some benchmarks, I really don't see the point in overclocking.
Regards,
Dave
foxmeister said:
I have to ask the question, but does it really matter?
IMHO, the Desire is plenty fast enough that overclocking it simply isn't necessary.
I can understand underclocking to eek out more battery life, but other than gaining a few points on some benchmarks, I really don't see the point in overclocking.
Regards,
Dave
Click to expand...
Click to collapse
so this, its really not needed at all. a decent fast rom and 1ghz is more than enought for things to be super speedy. any decent kernal will provide more than enough speed.
overclocking(and lots of other things these days!) reminds me of that bit in jurassic park where they are all sat around the table and geoff goldblum says:
"Yeah, but your scientists were so preoccupied with whether or not they could, they didn't stop to think if they should".
herein lies the lesson, just because you can do it doesnt mean you should do it.
Well,I have my reasons wanting to overclock...First off,I will check if I can see any difference in speed or smoothness.If there isn't,I will just revert the clock back to normal after some benchmarks.
I just am the kind of guy that wants to get the most out of his phone!
I think ALL Desires can overclock to 1267Mhz. It's not that rare and I've not seen anyone having a problem with it.
It does make things a bit snappier as well.
sbdags said:
I think ALL Desires can overclock to 1267Mhz. It's not that rare and I've not seen anyone having a problem with it.
It does make things a bit snappier as well.
Click to expand...
Click to collapse
That's what I'm talkin' about man!
And now that I think of it,it's not that much.I mean,the Hero could overclock @768,which is 45% overclocking.The Desire's 1267 is about 27% and 1344 is about 34,5%.Nothing too much!So why not?
Every CPU is different. The Qualcomm Snapdragon is a very different beast compared to the Qualcomm MSM 7200A.
We are just starting to learn what we can do with the Snapdragon without damaging it.
Kinma said:
Every CPU is different. The Qualcomm Snapdragon is a very different beast compared to the Qualcomm MSM 7200A.
We are just starting to learn what we can do with the Snapdragon without damaging it.
Click to expand...
Click to collapse
Well my man,in this case the MSM7200A is no beast but rather a pooch that barks to no avail!Good pet however!
Joking aside,the Snapdragon is a beast for a mobile phone,but even beasts get beaten.Now,if I can somehow reach or even get close to the performance of the Galaxy S or the Droid X I'll be happy.Software wise I believe that HTC is far superior ,but it's hardware is a little out of date.Let's see what their new devices will do for us!
Btw,does anyone know if the so anticipated HTC Ace will be anything better than what we already have or if it will be the Evo for GSM users?
Thanks!
The desire is plenty fast as it is and I don't see the point of overclocking it. I've had it to 1267 in the past and it made no difference at all for usability. I'm also the type that overclocks all his computers...
Sent from my HTC Desire using Tapatalk
Personal preferences dude...What everyone does with their phone is their own business.I wish I could resist overclocking too!
However,I was watching a thread over at the N1 forums in which a dude named Storm9999(genius dude,not just a random one) stated that an overclock @1,3GHz could fry our phones.Is that so?I mean,I know overclocking reduces the CPU's lifetime,but is it THAT MUCH dangerous?
I think overclocking can kill your phone.. I use to overclock my own o2 orbit and it died after a year..
Friend of mine just burned his old HTC by overclocking it and as a consequence is going to buy a desire.
I had my phone overclocked at 1345Mhz for a moment, just to test it, and it made no real difference to when it was overclocked at around 1.2Ghz, which in turn has very very little difference to stock 1Ghz.
I think the only case where you see some small impact is in games.
I've tested HD recording at 1.345 Ghz and stock speed and there was no difference.
If anything, it's going to kill your battery and shorten its life for sure, going so high. If ever I will OC again I won't go over 1.1 and only if I find some tangible improvements.
As said, this phone is always fast, there is no real need to OC, other than for 'fun'.
The fun is what I want...Well,most probably I will have my phone overclocked at the maximum speed it can get for about a week or two and then go back to 1 or 1,1GHz...
Btw,your signature kicks ass andycted!
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
cjward23 said:
Why do you need to overclock that high? I've used the 1.8Ghz and found that to.be overkill. I'm running at about 1ghz at that seems ample.
Sent from my CM7 powered Desire Z
Click to expand...
Click to collapse
+1
Wouldn't that fry your phone without any active cooling system or something? Sounds unnecessarily risky..
dietotherhythm said:
Hai Guise!
Back a little while ago the G2/Vision thread (before Desire Z was merged) had a thread about overclocking made by a user named Flippy. I followed it for a while because it was getting insanely out of control and awesome. I had used 1.9Ghz as my max oc for a while and It was great. Now I'm on 1.8Ghz again because the 1.9Ghz kernel was removed later on and replaced with the 1.8Ghz update zip. (For some reason doesn't work for me so I had to fastboot it)
So the reason I made this thread is because I would like to have the 2.0Ghz kernel. I know it's possible and has been done already. I've looked into compiling my own but apparently I need linux to compile it and I'm not fond of installing VM's on my old computer that will barely run as it is.
Now I ask of you, if anyone who is kind enough to possibly please compile a 2.0Ghz zimage for me, I would be greatly in your debt and appreciate it much so! I understand that it is my fault if I mess up my device and only I am held responsible.
Thank you in advanced to anyone kind enough to offer their services.
Click to expand...
Click to collapse
You don't need a VM. You need to wipe the garbage off and install linux on the "bare metal".
While it would be *neat* to oc this phone to 2GHz - just because. It would be beyond useless and I can just see some noob burning down their parents house or possibly starting a nuclear war with Russia by accident. Lets not forget your carrier reporting you to the CIA for having a nuclear reactor in your phone.
Look, with no active cooling it's just downright stupid to go that high. However being the genius' that we are I'm sure somebody could devise a method to install a mini fan or some liquid cooling on this phone. But then you may need that nuclear reactor to power all that stuff. Haven't we already set a guiness world record at 1.8GHz on a production phone anyway? Maybe we need to tell them so we can make it in the book
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL, it didn't make you go back in time or some ****?
The 1.9Ghz kernel caused my phone to crash. 2.0 would burn your phone's processor out. Just use the 1.8Ghz kernel and have the profiles on SetCPU set to the lowest speeds when the display's off.
Your phone may not actually run stable at 2GHz. Mine doesn't run stable past 1.6GHz, and that runs psx4droid *perfectly*, especially with the optimization they've done in the app recently.
Also, even with setCPU profiles, battery drain when you ARE running that high is a beeeotch.
Honestly, it's not really for OCing that high, but rather the look at what I can do I had a friend just ask be how high I can OC my phone and at 1.5GHz he's like woah :O His face at 2GHz would have been like
I previously used Flippy's kernel on my G2 and did OC it to 1.8 GHz, and got a Quadrant score of 3037. It was cool to see how fast my phone could actually get, but I'm more than comfortable with OC'ing it to 1.4 GHz. Anything more than that seems to be unnecessary to me, but that's just my opinion. Last thing I want is to have my G2 melt while it's in the pocket of my pants.
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
mejorguille said:
Try the .ko module and overclock that way
Sent from my HTC Vision using XDA App
Click to expand...
Click to collapse
Oh yeah totally forgot that existed. Thank you for the useful response.
tried the module but the phone freezes after doing anything above 1.4ghz
I believe it needs voltage tweaking which I don't know how to go about sooo... yeah
MacaronyMax said:
My phone froze at 2Ghz... I went in for 2.2Ghz at first but it froze after a couple seconds
Click to expand...
Click to collapse
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
KCRic said:
Nope, not for me anyway. I know different HW revisions and such have an effect on how high you can oc but my phone doesn't skip a beat at 1.8GHZ. I'm sure I could go to 2GHZ or a bit higher but unless I'm trying to emulate a PS3, I don't see the purpose - aside from maybe setting a record.
Click to expand...
Click to collapse
Same. I can do 1.8 all day if I keep near a charger. Anything over 1.3 will drain my battery like a monster though.
I keep at 1.2 regularly and only go higher for games.
Sent from my HTC Vision using XDA App
EdWRX said:
LOL!! Froze? Or more like "fried"!! Hehe
Doesn't it happen to you guys that when running @1.5Ghz u get many FC from some games? Running excessive OC might stop your phone from working.
Why do you need 2Ghz?!
Click to expand...
Click to collapse
I can jog 1.8 and 1.9Ghz for a day without even reaching a dangerous temperature.
Can I get some supportive ideas and less herp derp personal opinions?
Highest Ive pushed mine is 1.5ghz. No need to go any further, Im satisfied with the performance. I get a full days battery life and the temperatures never get critical (my setcpu profile is set to underclock at 38.2 degrees Celcius but my G2 hasn't gotten close to that). Im curious at what stage my G2 would score 3000+ in Quadrant.
You might PM flippy and see if he will customize a kernel for you that goes that high. Let him know you will send a certified letter signed in blood and a video of you stating you release him of all liability for what ever town you destroy when your phone goes nuclear.
Seriously though, I'm willing to be he'll make it for kicks if you ask nicely - btw, call guiness so you can make it into the record books. Also, I'm not sure but if you flash a 'blank' kernel couldn't you just echo the speed and voltage in the 00banner file or whichever one it is?
I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium
Each Evo is different. Some of them can't handle that high overclock, or can't be undervolted very low. Each one is different, each has its limits.
I don't understand the big deal with overclocking. It burns your battery faster. I personally underclock, with little to no lag and is good enough for my casual gaming needs
Mine doesn't like a clock much at all. I can get about 1.1 before it starts locking up but even then it hangs a lot. I honestly don't see a difference from 1.0 to 1.2. Get a decent rom, good kernel and try out the v6 script an I almost guarantee you will like that better.
beaumontcali48 said:
I have a og evo I want to know why when I overclock to 1.2ghz it freezes my phone why does it do that ?
Sent from my Nocturnal 4G using xda premium
Click to expand...
Click to collapse
Well for us to be able to help you, you would need to provide us with more details on how you are trying to accomplish this.
I use no frils cpu but have also tried setcpu and viperMOD I know that's the best way to overclock but is very confusing. Have any step by step instructions to of to 1.2 I know having higher voltages helps as well.
Sent from my Nocturnal 4G using xda premium
Sent from my Nocturnal 4G using xda premium
Overclocking is overrated. If you need to overclock for every day usage, then something is wrong - at least in my opinion. Resource intensive gaming is different, but you shouldn't need to overclock for browsing, texting, casual games, etc.
Try out the V6 Supercharger script. I'm not currently using it, but have in the past and it seemed to make my phone more snappy. A lot of people swear by it and it's a great script, definitely worth a shot. There are other things you can do to speed up your phone without overclocking. I'd try other options first since overclocking will chew through your battery. Increase the dalvik vm heap size, there are plenty of free apps on the market to help with this task. Uninstall apps you don't use, I'll bet that you never use some of the apps on your phone. Back them up with Titanium Backup and you can restore them if you ever need them again.
In case you didn't already know, the Evo can't overclock past 1.2, I'm not 100% sure why - it has something to do with the processor.
Supersonic Evo 4G | MIUI | Tapatalk
I never oc over 1075 and only when plugged in if i play a game I need to oc.for I just activate my charging profile and plug up and play 1.2 ghz is a good chance of doing serious.damage as these older scorpion processors get very very hot at that clock speed so they lock up to try and protect themselves from heat damage or they shut down the phone 1075 is as high as you should need to go for any games the evo can handle on the subpar gpu
Sent from my Classic-EViLizED-ToMAToFiED-EVo4g-
beaumontcali48 said:
...also tried setcpu and viperMOD I know that's the best way to overclock.
..
Click to expand...
Click to collapse
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!
shift
Get a shift. Mine runs fine at 1.9. But usually run it art 254-1200 on demand.
{ParanoiA} said:
I'm pretty sure viperMOD is more for undervolting than overclocking, which are not suppose to be combined together. I am running vipermod with max voltages - 50. Other nite was playing snes9x and was getting some lag with a game so I bumped max CPU up to 1.2. Phone went into a bootloop and had to superwipe and reflash everything. Don't know if its b/c vipermod + 1.2 CPU or just bumping up CPU. Didn't try it again.
Support TrevE!!
Click to expand...
Click to collapse
You can overclock and undervolt together just fine. You just need to ensure that every frequency has a high enough voltage to run the processor at that step. My Evo is overclocked and undervolted just fine, although IIRC I can only push it up to 1.1 GHz . My tablet is 1ghz to 1.6ghz and is undervolted as well, though.
merge rls 2.0, iron monkey, Droid overclock because of the profiles options. I set up four profiles including one for temp. sometimes i'm underclocking and sometimes overclocking but only up to 1.19 to prevent freeze and boot loops. Only downside is right at open Droid overclock needs su permission but that is my choice since profile changes at open.
Very snappy afterwards.
Sent from my PC36100 using XDA Premium App
When I had the 4G, I was never able to go above 1118, or somewhere around that. It would have freezing issues.
On my evo shift, I was able to do 1.7 gHz (compared to stock 800 mhz) ok. 1.6 pretty reliabily, and I could run 1.5 all day long. Some guys could do 1.9. It just depends on the phone.
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
Shoot the brutha a link
TrevE Supporter!
tommy0823 said:
Actually overclocking and undervolting is counter-productive. What you should do, is read carhaulers and ropodopes guide over at vaelepak. Its give some good useful info about how to set up a good aosp rom. I'm underclocked, undervolted, and still getting 1400+ benchmarks. Check it out bro. You'll love the results.
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101
Yea shot me the link too bro.
Sent from my PC36100 using xda premium
First let me say I don't use viper mod or any voltage controlling mod.
On sense 3.0 roms such as mikg I over clock to 1152 and set the minimum to 384 and its smooth as butter. No problem and battery lasts all day.
On aosp however such as decks (I'm on it now) I underclock to 499 and leave the min at 254. Smooth as always and battery lasts forever.
Anything past 1152 is going to cause problems (at least in my experience) also the rom/kernel can effect how much you can overclock.
Sent from my PC36100 using xda premium
Gary13579 said:
What? Overclocking and undervolting are two completely different things, and they aren't mutually exclusive. Unless you can provide a good reason as to why it's counter productive to do both, I don't buy that at all. Just checked my phone, my overclock requires an extra 25 mV for all three steps I've overclocked. 25mV isnt much, and it certainly isn't going to kill my battery that much faster.
Besides, the only time the CPU is going to be entering these high power modes is when it needs to do work, and it's better to do work as fast as possible to go back to sleep. Would you rather wake up, do a mundane task for 5 minutes, then go back to sleep or wake up, do a task at 2x the speed while only consuming 30-50% more energy, then going back to sleep after only 2.5 minutes?
HUGI is real.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Its counter productive because it is giving less to something that needs more. (Don't take this post as me trying to be a ****. Just voicing how someone explained it to me a while ago)
Think of this as cars.
Lets say you have a nice fancy v8 mustang. Stock, everything is well, balanced.
If you start adding parts and get it pushing out 1000 horsepower (overclock) your most likely gonna need more feul (voltage) or at least stock amount flowing into the engine just to keep it running.
Now lets say you got that same 1000 horsepower gas destroying mustang and you start to lower the amount of gas flowing into the engine (undervolt (done in vipermod)) cylinders (CPU) wont get enough gas, it wont work, and your stuck going no where.
So if that made sense (did to me) then you can see why they are counter productive. Unless your using vipermod to overvolt (which idk if you can since I don't use it) then you can disregard this whole post
Sent from my PC36100 using xda premium
Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101
Gary13579 said:
Your car analogy is completely irrelevant. You can look up the exact voltages that the CPU runs on at every frequency, *even when overclocking*. Overclocking an Evo 1ghz to 1.2ghz takes maybe a 5% bump in voltage, and that 5% extra power is only going to be used *when the CPU is running at max speed* (which is only when there is a lot of work to do), and even then, it's *still better to let the CPU run at max speed with a tiny bit more power consumption than to cap the CPU at a slower speed and make it work for even longer*. Intel calls it HUGI, Hurry Up and Get Idle.
I know what I'm talking about, and I wish people would stop trying to argue with me based off of second hand speculation. I do this for a living, after all. There is absolutely nothing wrong with overclocking and undervolting, and it's the best way to get the most battery life *and* performance out of your phone, period.
Sent from my Transformer TF101
Click to expand...
Click to collapse
Hmm, *interesting*. I believe the best answer to the OP was covered rather well earlier. It's all about your rom/kernel/hardware combination. With all the variables to consider as relevant, your best bet is to experiment and find what works for your device. Don't check set on boot untill you are confident the set-up is stable. Higher is not always better with overclocking. My device runs blazingly well underclocked @768max. Gets insanely great battery @499max. However my quadrants are better @ 1036 than at 1190.
Great thing about android is you can experiment and learn through trial and error.
Sent from my PC36100 using xda premium
I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?
iArtisan said:
I heard there was a problem with stability issues before. Has it been fixed?
Also, do any of you guys feel the need to OC in the first place?
Click to expand...
Click to collapse
I tried OC'ing to 1,4 for a short time, didnt get any instabilities.
Which leads me to question two. No I don't feel the need to OC this phone, it is still good enough to cope with everything i throw at it.
The worst that will happen is that it will run a little hotter than normal. I was running Trinity Kernel on RasCream ROM clocked at 1.5GHz and it was fine, nothing crashed, no reboots, all was well.
Besides; It's a Nexus, it was built for this!
This varies for everyone
Sent from my GT-I9300 using Tapatalk 2
Meh. It all varies. No 2 chipsets are the same. What may work for someone else may not work for you. Trial and error is the only surefire way to find out.
Hi,
I agree with what has been said above, all the CPU's are not equal but actually the progress made by the kernel devs allows all (or almost) phones to run at 1.3* Ghz (1.34/1.35 Ghz, it depends of the kernel) without any issues.I think it's for all, actually I don't remember a user with issues at 1.3* Ghz...
And for most phones 1.5 Ghz is fine.For some others, above 1.5 Ghz is problematic but it depends also of too many factors.
Now it's not like it when the Genx came out, where 1.3 Ghz was the limit of CPU overclock for all the phones.
And many people can run stable at 1.65 Ghz, also it depends of the kernel.
For me for example my max CPU freq usable each day, so stable is 1.72 Ghz with Glados kernel, above (like 1.8 Ghz) it runs fine for 30 mins, sometimes 1 hour, but after always freeze/reboot... maybe my CPU can't reach this CPU freq or maybe my settings are wrong (voltage) ...
I agree, an extreme overclock like 1.72 Ghz is not really necessary for all day (heat, battery life, etc...) but a little overclock like 1.5/1.53 Ghz and you a difference in certain case (openning some apps, general UI, browsing, etc...).
But if we have the ability to test and play...why not... ,in any case for me it's yes, I like overclock and test the possibilities/limits of my phone, different settings...
Everyone does as he wants and it depends on what you want (battery life,a little more power in some situation like playing or a higher bench score ).
Well considering Texas instruments recommended highest clock speed for this processor is 1.5 ghz I'd say your fine. Anything above that is dependent on how well your chip set will handle it. Besides who honestly has needed to OC for anything other than benchmarks?
Sent From My Sprint Galaxy Nexus
Well i have a phone, and in that forum members says that Overclock the cpu shorts the motherboard life, is that true? and for those who are using Overclock, do u really feel something diferent with the performance of the tablet? or do u see something wrong with Overclock? like random reeboots or makes the tablet hot? Im thinking in OC or not my tab, so i wanna see the experience from other members, thx in advance. :good:
Deshabilitado said:
Well i have a phone, and in that forum members says that Overclock the cpu shorts the motherboard life, is that true? and for those who are using Overclock, do u really feel something diferent with the performance of the tablet? or do u see something wrong with Overclock? like random reeboots or makes the tablet hot? Im thinking in OC or not my tab, so i wanna see the experience from other members, thx in advance. :good:
Click to expand...
Click to collapse
I cover this in the guide I wrote in general (which has been pushed down quite a ways) but anyways here goes another version.
Overclocking varies from device to device, even of the same model. Variances in tolerance is on a per chip basis, as long as they pass within a certain range they are sent out for production in devices. Overclocking in general is within means of the chip's abilities, if it isn't, you'll know it. Generally speaking, 1.4 GHz is perfectly fine on our devices. 1.5 GHz is also usually ok, but is the upper end of what the Tegra2 can usually tolerate. Few an go past 1.58 GHz, my old G2x's tegra2 could hit 1.7 GHz,but that's well beyond "normal" range.
Overclocking a device is the same as overclocking a PC, you need to be careful with it. Don't just ramp it to 65% overclock and expect it to run fine. Every chip is different. Do it in steps, and test each step before moving on. Test it in normal usage, test it in heavy usage, gaming, etc.
An overclocked device will certainly run hotter then normal, it's running faster, drawing more power, and that creates a hotter running core, no way around it. Keeping in mind there is no airflow in these things, that makes the biggest enemy to CPUs even more dangerous.Does it run so hot that it can shorten component life? Sure it can. Will you still have the device when it happens? I doubt it. Likely, we'll be on Tegra5 before it even begins to show signs of stress.
One of the nice things, though, is our CPUs range so much in speed according to load that just because your Max is 1.5 GHz, it doesn't always run there. Most times, it won't even be in the overclocked speeds. Does it run faster? Sure does. Benchmarks will raise nicely, and games that maybe got choppy before will smooth out, movies that couldn't play well will be fluid, the heavens will align, mankind will discover world peace and I'll win the lottery.
All that being said, I don't usually overclock, in fact I tend to underclock a little to 800MHz. Its usually sufficient to do normal tablet stuff, and I adjust the speed according to what I require. If my movie is lagging, I'll bump it up until it smooths out. Same for a game if it needs it.
In the end, its all personal choice, really. Just because you CAN overclock, doesn't mean you NEED to. IMO a well tuned governor will give as good a result as overclocking in normal usage, and a good I/O Scheduler will also help alot, without adding anymore heat or stress to your device.
TL;DNR:
Overclocking is fun. It causes more heat. It likely won't explode within the time you own it. Or your children. Your battery will suck.
thanks pio for the answer, thats what i needed to read, cuz usually when u talk about OC its like "yeah dude, OC its "tha greeeeeat doi it dude" or something like "dont do it!!! u will decrease your tablet life" and yes, i know that devices are way to diferent even if they are the same model, and also im agree with u, governors and I/O works better than OC but we dont have many for our device, i miss the smartass v2 governor,or the brazzilianwax too, but well, hope someone can port it for us someday.