Develop Bugs

[Q] Help getting back to stock or decent rom

Hi Guys
I rooted my HD last night with latest cyanogen with everything working fine.
So I then tried to overclock and flashed a kernal to do it
2.6.32.21-ck2-hrkfdn-cyanogenmod-gf01fa7d-dirty
since then the phone has been running like a dog. if i run a benchmark i get device does not support stencil buffers and I cant play games at all.
Is there a better kernal to use or can anyone explain how to get back to the stock kernal ?
Cheers

Flash your cyanogenmod rom again, then you have your old kernel back.

MicBoef said:
Flash your cyanogenmod rom again, then you have your old kernel back.
Click to expand...
Click to collapse
thanks mate ive flashed a new kernal onto it
2.6.35.14 leo droid
now i cant get bluetooth working and i need it for the car
any ideas ?

Try this kernel http://forum.xda-developers.com/showthread.php?t=1085725, i think it's the best aosp kernel here on xda!

Back to stock
Hi guys,
I've unrooted my DHD the other day from LeeDroid 3.3.3, now back to stock (I believe?) 1.32.405.6, Android version 2.2.
When I check online for OTA updates the phone says there are no updates, but I know there is a 2.3 GB version with a 3.0 Sense available.
Any ideea how to get the latest OTA, please?

The only thing I can guess at is that something is not quite 'stock'. Did you restore your old radio and original hboot backup that was made when you originally rooted it? You might've already used this but Yoshi_523 wrote an awesome guide that I used when I needed phone fixed under warranty:
http://forum.xda-developers.com/showthread.php?t=920876

remuspider said:
Hi guys,
I've unrooted my DHD the other day from LeeDroid 3.3.3, now back to stock (I believe?) 1.32.405.6, Android version 2.2.
When I check online for OTA updates the phone says there are no updates, but I know there is a 2.3 GB version with a 3.0 Sense available.
Any ideea how to get the latest OTA, please?
Click to expand...
Click to collapse
U need S-on to receive the official update

ZTE v8200+ New phone, Need help unlocking and installing JB (Vtelca V8200*)

THe venezuelan government has started selling a ZTE based phone with android 4.0.1. I have not had success trying to install CWM, im stuck at android recovery 3e. I would like as much help as you guys can give me, i am the 1st one trying this, there are no references on the internet about it. Im trying to find a ROM that works and if possible, unlock my phone. Thanks in advance. Im attaching complete phone specs.

Carrasco20 said:
THe venezuelan government has started selling a ZTE based phone with android 4.0.1. I have not had success trying to install CWM, im stuck at android recovery 3e. I would like as much help as you guys can give me, i am the 1st one trying this, there are no references on the internet about it. Im trying to find a ROM that works and if possible, unlock my phone. Thanks in advance. Im attaching complete phone specs.
Click to expand...
Click to collapse
I would like that this page support this model....

mike_san said:
I would like that this page support this model....
Click to expand...
Click to collapse
I would like it too! Please! Some support for us! Thanks!

please rom zte v8200
please need a good 4.1 or 4.0 cooked rom improved Venezuela there are a thousand people with this phone and there is no upgrade please help us to update it thanks

hello im downloading sources from cyanogenmod to port it into V8200. when im ready all ask you for testing

[Q] Flashing CM 10.2 over Gingerbread stock ROM?

Hey guys, I recently flashed my Ace II to CM 10.2 and it's working perfectly, but there is just one thing...I don't have any mobile connection which is kinda odd. I have searched to some previous threads and read a reply how I can't flash the CM 10.2 over my original Gingerbread. Is that right and could that be the cause of my network problem since the phone is not showing my phone number or anything that has to do with the SIM card. If that is the problem how do I fix it? Do I need a JB firmware, can I get one here and is any JB firmware for GT I8160 safe for my phone?
I hope someone can help me asap and thank you for reading

you cant flash CM over GB !! -> causes ur problem !!
flash JB first, then install CM.

Yes, always flash roms in order gb > jb > kk

You first have to upgrade to JB first

What to do with the phone to make it usable?

My friend has an xperia m single sim model running latest official firmware and its is very slow. Hangs quite often and takes 2 to 3 swipes to unlock the screen. So i thought ill flash the phone with a custom rom.
Im good with flashing phones and have done it a lot. I always do my research before flashing to get the best rom for the phone. But with this phone i am stuck. I dont think i have found a stable rom yet. I know i should not ask which is the best rom but still can someone suggest a rom which can be flashed to this phone.
The problem is that after i will be meeting my friend for a day and i cannot flash it for a long time. So i dont want to put a rom and then after few days he finds serious bugs.
So some suggestion please. I usually go for omnirom or cm11.Some advice regarding rom,kernel,recovery would help me a lot
Thanks

aswinrulez said:
My friend has an xperia m single sim model running latest official firmware and its is very slow. Hangs quite often and takes 2 to 3 swipes to unlock the screen. So i thought ill flash the phone with a custom rom.
Im good with flashing phones and have done it a lot. I always do my research before flashing to get the best rom for the phone. But with this phone i am stuck. I dont think i have found a stable rom yet. I know i should not ask which is the best rom but still can someone suggest a rom which can be flashed to this phone.
The problem is that after i will be meeting my friend for a day and i cannot flash it for a long time. So i dont want to put a rom and then after few days he finds serious bugs.
So some suggestion please. I usually go for omnirom or cm11.Some advice regarding rom,kernel,recovery would help me a lot
Thanks
Click to expand...
Click to collapse
Try Latest build of CM11 FXP, that is most Stable Rom according to me.

I'd say it's latest build from FXP (it's 326 so far). No serious bug or annoying UI. go for it. :good:

i will go with cm11 then.Thank you guys one more doubt. Does cyandelta work with fxp builds?

What happened here?

After CM 13 rom was flashed build from 17th was ok,then I did update to 18th December build and now this happens on every rom.
Any ideas what to do?
EDIT: ok so after about 5 minutes when phone got cooler it went away and is now okay... anyone has idea why this didn't happen before? could the phone be overheating?

patt2k said:
After CM 13 rom was flashed build from 17th was ok,then I did update to 18th December build and now this happens on every rom.
Any ideas what to do?
EDIT: ok so after about 5 minutes when phone got cooler it went away and is now okay... anyone has idea why this didn't happen before? could the phone be overheating?
Click to expand...
Click to collapse
This is an old well known problem with CM and other CM based Roms. Your problem of split in the screen goes away if u turn the screen off and on again. This will happen on every reboot. In order to get rid of the problem completely u need to flash kitkat boot stack from the link below (for TMO D851 only and not for other variants).
https://www.androidfilehost.com/?fid=23991606952594903
After this u can flash the latest modem of your choice.

Stick to stock rom. CM is garbage

Still_living714 said:
Stick to stock rom. CM is garbage
Click to expand...
Click to collapse
Phone is not mine. Here is what I think: Stock is garbage,laggy , CM: rocks

patt2k said:
Phone is not mine. Here is what I think: Stock is garbage,laggy , CM: rocks
Click to expand...
Click to collapse
I have been running stock since I bought the phone and mine still isn't laggy. Sure when I have tons of apps then I notice lag but cmon. Yeah cm is faster but at what expense?having bugs that make the phone useless?...