Develop Bugs

[Q] help troubleshoot something that should be so obvious.

I was gonna try to use mobile odin for the first time, got the pro version. When I try to download a kernel from xda it says download unsuccessful every time. What obvious thing/setting am I missing?!?! I have allow unown sources checked, im running el29 stock rooted with el26 kernel. Please help.

RussellEstridge25 said:
I was gonna try to use mobile odin for the first time, got the pro version. When I try to download a kernel from xda it says download unsuccessful every time. What obvious thing/setting am I missing?!?! I have allow unown sources checked, im running el29 stock rooted with el26 kernel. Please help.
Click to expand...
Click to collapse
Are you trying to download from the website or an app?
Sent from my SPH-D710 using Tapatalk

slick_rick said:
Are you trying to download from the website or an app?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Website xda

some of the file share sites won't download directly to the phone....try downloading to a PC then transfer file to phone...

Also, if you don't have it already, you should get the app 'Download All Files' for the phone. May not apply in this case but a must have app anyway.

tdunham said:
Also, if you don't have it already, you should get the app 'Download All Files' for the phone. May not apply in this case but a must have app anyway.
Click to expand...
Click to collapse
Get the xda app? Just did. I don't see where it says DL all files...

RussellEstridge25 said:
Get the xda app? Just did. I don't see where it says DL all files...
Click to expand...
Click to collapse
I'm not sure what you meant but DL all files is a market app.
And I'm pretty sure it works with the XDA app.

tdunham said:
I'm not sure what you meant but DL all files is a market app.
And I'm pretty sure it works with the XDA app.
Click to expand...
Click to collapse
Thanks man! exactly what I needed.

att fusion 2 / u8665

Hello so I am new to these forums but have used them in the past for assistance. I have been trying to root a att fusion 2 aka u8665 ive seen a couple posts on here about how to and someone said they were successful but vauge steps cause frustration.
http://forum.xda-developers.com/showthread.php?t=1920528
http://forum.xda-developers.com/showthread.php?t=1976657
As i said i have been trying for a while and basically tried everything listed in those two posts, also the post where they said they managed to attain root through fastboot confused me. From what i understood fastboot needs root to be able to operate, otherwise the steps in the post about using adb i just keep running into permission issues where i cant mount anything to root it.

I had trouble myself, but figured it out. I recompiled all the files posted by RFE.
https://www.dropbox.com/s/lm11rrn3z5c2j6v/Huawei-Fusion-2-Recovery-Root.zip
Sent from my NookColor using xda app-developers app

still stuck
thank you for the quick response, but see the issue i was having is that fastboot is installed through the adb, yet i cant get it to recognize my device. but again thanks for the quick reply but one last thing this recovery.img is it a pre rooted image?

gm4n1989 said:
thank you for the quick response, but see the issue i was having is that fastboot is installed through the adb, yet i cant get it to recognize my device. but again thanks for the quick reply but one last thing this recovery.img is it a pre rooted image?
Click to expand...
Click to collapse
were you able to root?
and yes, the recovery.img installs SuperSu on reboot
Sent from my NookColor using xda app-developers app

fastboot not seeing device
RoboticBuddy said:
were you able to root?
and yes, the recovery.img installs SuperSu on reboot
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
not yet i am going to try again in a bit here though, still running into issues where fastboot will not recognize the device. im guessing a driver issue, except not sure why they wont work.

RoboticBuddy said:
were you able to root?
and yes, the recovery.img installs SuperSu on reboot
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
ok so i got to where i need to use the actual flash command but it returns a error " cannot determine image filename for 'recover.img' "

RoboticBuddy said:
were you able to root?
and yes, the recovery.img installs SuperSu on reboot
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
thank you all rooted now

RoboticBuddy said:
I had trouble myself, but figured it out. I recompiled all the files posted by RFE.
https://www.dropbox.com/s/lm11rrn3z5c2j6v/Huawei-Fusion-2-Recovery-Root.zip
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
If anyone else would like to contribute please do. I've had 5 attempts at registering this type of device without triggering a call-home. I've swapped out 90% of all the components that brand the phone AT&T (including huawei-hardware-extensions & mobile phone "care"??). When using Titanium Backup you will notice that some of the specially protected APK files cannot be removed or "found" - you will get the message "APK file not found." The only way to get around this is to use fastboot and pull the file from the device before removing it. If you remove the wrong system APK your phone won't be bricked, but it will give you infinite android.acore force close loops and other nasty crippling bugs (such as no touch-keys backlight). If you want to be sure that you are not doing any damage, do a full reboot and cache clear after uninstalling any of the AT&T prepaid system components. Many of the system components can not be removed or replaced with other versions until their dependencies are replaced or removed as well. Titanium Backup once again comes in handy and lets you select an android ID or "profile" which is a UID that is tied to your Google Play / Android Market account. You will have to create a new random Android ID after you have have replaced all the apps. Make sure you remove any files like Twitter that have been specially made for this phone & include a long unique ID like Twitter-3-6-0-(123456)--00000_V300_001.APK - the phone is incredibly fast without any google or ATT stuff on it.

{ROM} Stock V8

Here is LG Optimus G Sprint V8 Stock Rom.
I have not done anything to it except root and busybox
This is Flashable in Recovery!
I've tested it with TWRP and everything seems to be good.
if there are any bugs please tell me.
Enjoy
DO NOT FLASH IF YOU ARE NOT LS970 (Sprint)!!!!
Click Here To Download
Will Post Better Download Link Once it Finishes Uploading
I Am Not Responsible for Anything you choose to do with your phone.
Thanks to:
Interloper
SnowLeopardJB
B_reezy
If I missed your name Please PM me.

First!
Downloading now!
Probably a dumb question, but if I flash this, will I have to redo my camera mod and Nocturnal's mod aswell?

Yes if you are already on V8 there is no need to flash lol
Sent from my LG-LS970 using xda app-developers app

2nd??? Ok, 3rd!

And MaddOG will be released soon!

Thanks for the hard work guys. YAY A ROM TO FLASH!!!!! Oh and HAPPY NEW YEAR EVERYONE!!!!
Sent from my LG-LS970

I downloaded and tried to flash and it keeps telling me failed...
Says error flashing '/sdcard/stock sprint v8.zip'
Any ideas?

You Sure what recovery are you using?
Can anyone Confirm?

sharkboy0901 said:
You Sure what recovery are you using?
Can anyone Confirm?
Click to expand...
Click to collapse
TWRP.
I downloaded it from my phone, but I'm in WIFI and confirmed the size. Will download from computer and let you know..
EDIT:
Happened again when I downloaded it from computer..

_Epic said:
TWRP.
I downloaded it from my phone, but I'm in WIFI and confirmed the size. Will download from computer and let you know..
EDIT:
Happened again when I downloaded it from computer..
Click to expand...
Click to collapse
Ok Fixed Try it Now

sharkboy0901 said:
Ok Fixed Try it Now
Click to expand...
Click to collapse
Downloading now.. :fingers-crossed:

Awesome thanks!
Sent from my LG-LS970 using xda premium

Heres the md5 sum I got. 84d1b95ad2347ec2a0879ba90d87982d
I'll try it here in a minute.
edit I got a status 6 error in TWRP

Its Because I Changed how the mount points were written so that If a variant tries to flash he wont get bricked.

So is there a work-around? Or wait for the fix?

engine95 said:
Heres the md5 sum I got. 84d1b95ad2347ec2a0879ba90d87982d
I'll try it here in a minute.
edit I got a status 6 error in TWRP
Click to expand...
Click to collapse
I got it to work.
I kept getting status 6 error but it checked the "zip file signature verification" box for some reason. So I unchecked it and it worked ?
Don't know if you downloaded the ROM from dropbox or this new site Engine.
Didn't work at all from dropbox whether i checked or unchecked the "zip file signature verification" box but it worked at the new site.

engine95 said:
So is there a work-around? Or wait for the fix?
Click to expand...
Click to collapse
Did you Download from dropbox or AndroidFileHost?
The one from Android File Host should work.

Dropbox
Sent from my LG-LS970 using xda premium

engine95 said:
Dropbox
Sent from my LG-LS970 using xda premium
Click to expand...
Click to collapse
Hit the Download Button again it should load Androidfilehost now.

Am right now. Thanks
Sent from my LG-LS970 using xda premium

[Q] Still without root...

So, I have tried time and time again, and am still no closer to getting my phone rooted. I have spent hours reading all over these forums, and Google in general, and have yet to get a straight answer to my question as to why my phone refuses to root.
I am thankful for the advice offered, such as trying SuperOneClick that does... well, nothing. [Says my device has no drivers, yet,. Windows sees my phone as an Android device, and the program generally locks up after]. Was told that my image is faulty, and yet, somehow it's still installed on the device/working fine. [Was suggested to re-download the CW MOD image, and re-install] And it just goes on and on... then silence from the community.
So, to boil it down to the nitty-gritty, the only thing I am getting is, while I -attempt- to install SuperUser via CW, I get this:
E:failed to verify whole-file signature
E:signature verification failed!
So, please, someone, assist me in getting my phone rooted!
-Haz

Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app

phatryan69 said:
Really not that bard should take 5 minutes TOPS seeing as u have all the files u need.
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
So, I can by-pass the halt? The phone won't install SuperUser. o.o
-Haz

try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.

yohan4ws said:
try installing superSU...
Now, super one click ... don't use it, it isn't for our roms.
you should be using Odin to flash CW, and then downloading roms and flashing with CW
If you want support from the community, why not offer more information...
What are you running now ? UCLH ? UCLJ ? Jellybean, Gingerbread, ICS ? How did you obtain the version that is running on your phone now ?
i've discovered the only way to root Gingerbread is to download a pre-rooted rom.
ICS, install CW w/ Odin and then flash supersu or superuser .... There was, at a time, I couldn't get ICS to root and had to download a specific SU or SuperSU not on google store that I found by searching the forums ....
Give us more info, as much and as detailed as possible and we can help you further.
Click to expand...
Click to collapse
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
What's SuperSU? Is that different?
For more details, I posted already to the fourms here before they went silent:
http://forum.xda-developers.com/showthread.php?p=35750419 and http://forum.xda-developers.com/showthread.php?p=35811065
As you can see, I tried everything, it's like my phone's being annoying... is it do-able to just re-set the phone to stock Gingerbread, and then just update using another ROM? And, if so, what one do I use? I just want a stable experience. Like, with the leak that came out not too long before the official, there was the keyboard error, and I even had issues with placing and receiving calls...
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz

U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app

phatryan69 said:
U need to install CWM b4 u do anything cause its just so simple. Then u flash watever u want....
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
I thought I already had that on there, I'm confused. I did what the guide specified hosted here on the forums, but, I still get stuck at the signature verification thingy.
Am I missing something?
-haz

Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app

phatryan69 said:
Sounds like a bad download...
Sent from my SGH-I927 using xda app-developers app
Click to expand...
Click to collapse
Tried that as well, unless like, all 10 attempts were bad.
Any other ideas?
-Haz

so why do u just want super user installed?
Sent from my SGH-I927 using xda app-developers app

Why not just install clockwork recovery and flash dmans stock rooted ROM? Since its comes per rooted for you?
Sent from my SGH-i927 using xda premium

Hazarath said:
I used the official update from Samsung when it was fully released... finally. So, running 4.0.4.
At this point, it's getting to the point where I am willing to basicly go back to out-of-the-box, then root the sucker, if I can do that. Seems perhaps a clean slate is in order, anywho.
Thanks for the quick reply, though.
-Haz
Click to expand...
Click to collapse
#1 what version of Odin are you using?
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
#3 Where did you get SuperSU from?
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Do NOT use Superoneclick, there is no SOC that will work for our phone.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.

I stumbled on this randomly.. no usb hubs i guess..
Are you using a USB that is a direct connection to the motherboard? usually that can cause issues, if your not on a connection to the motherboard it won't work..
Click to expand...
Click to collapse

#1 what version of Odin are you using?
Click to expand...
Click to collapse
3.04, as linked in the guide.
#2 What version of CWM are you using? Where did you download it from ? (Here I hope : http://forum.xda-developers.com/showthread.php?t=2007198 )
Click to expand...
Click to collapse
Exactly from there. Same version.
#3 Where did you get SuperSU from?
Click to expand...
Click to collapse
The guide's link, and from their website.
#4 Are you downloading it with your phone's browser, or are you downloading it to a computer and transferring via USB ? (It's possible you have a bad flash card/RAM in the computer/physical hard drive in computer).
Click to expand...
Click to collapse
From my computer, via USB, and not likely at all. Every component is new, and to make it more amusing, I did all this in the past with the leaked ROM before I got this new system on my last compy, so, yeah... if -both- computers does the -exact- same thing... prolly time to format the phone, and try again, somehow?
Do NOT use Superoneclick, there is no SOC that will work for our phone.
Click to expand...
Click to collapse
Guess that's one reason why it doesn't work at all.
It has been some time since I have used ICS. I had completed the stock download from samfirmware.com, installed CWM 6 with Odin 1.85 and (taadaa) attached to this thread the same version of Superuser I used to install via CWM.
Click to expand...
Click to collapse
And I thank you, however, that, again, is the same link as before, and, thusly, gives the same error.
Thanks for the reply... think it's time to just tell the phone to start all over, try again?
-Haz

yohan4ws said:
I stumbled on this randomly.. no usb hubs i guess..
Click to expand...
Click to collapse
Nah, just a data transfer connection hooked into the hub on the -back- of my computer.
-Haz

..okes.. I feel like somewhat of an idiot. I decided to just try one last time to get the recovery mod in there again, and, for whatever stupid reason, instead of seeing a blank background with the Android, I saw the CW icon, and a silver icon... I told it to apply SuperUser as I have tried so many other times, and it just... worked.
The closest thing I can figure is that my browser, and my eyes told me that I had multiple copies of the current CW Mod, but, in my working directory, I unzipped the -old- version.
To make it simple; I -now- have root on my Glide, woot!
*runs to un-install all the bloat ware*
-Haz

I didn't realize that CW hadn't installed properly for you ... good to know it's working for you now! ..

FIXED: Thanks..

messing with my phone i edited the build prop and i thought i had a back up which i dont and now my phone keeps bootlooping... need to download EL26 CWM one click odin tar but cant access Rwilcos thread for some reason i keep getting " Oops Google chrome coult not connect to Rwilcos"
anyone have the file they can share or maybe link me to another download location
trying this so far
http://forum.xda-developers.com/showthread.php?t=1662295
EDIT :: got the one click and fixed phone .

Ma$etas said:
messing with my phone i edited the build prop and i thought i had a back up which i dont and now my phone keeps bootlooping... need to download EL26 CWM one click odin tar but cant access Rwilcos thread for some reason i keep getting " Oops Google chrome coult not connect to Rwilcos"
anyone have the file they can share or maybe link me to another download location
trying this so far
http://forum.xda-developers.com/showthread.php?t=1662295
Click to expand...
Click to collapse
i have it uploaded to dropbox so i'm sharing the link with you
https://www.dropbox.com/s/3q9crwjcb0p9xow/StockCWM-EL26.tar.tar

thats the One click exe?

Working fine here.
Sent from my SPH-D710 using xda premium

well... the website is working now
weird...

Mattix724 said:
Working fine here.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
well for some reason on this pc i keep getting that error...
my other pc were i have all my files and have all my development stuff on took a dump and crashed
looking for the One click odin file
EDIT: tried the website again and now its working .... YESSSSS!!!!
thanks either guys .

EDIT: fixed phone all good ..