I just upgraded from 10.0 to 10.1 with the latest nightly and I'm now getting a error when I try to dial out "Voice calling not supported".
cm-10.1-20130415-NIGHTLY-epicmtd.zip
gapps-jb-20121212-signed.zip
nexusmodempatch_CM_10.1_AIO_(nitest-01-12 kernel w JB-Big Mem patch).zip
nitest-jb42_nr-twrp-0410.zip
everything else seems to work fine.. wifi & 3g (dont see a 4g option but ill play with that next)
any suggestions? ive seen that its a modem problem but couldnt find a fix.
Since there hasn't been a new patch in a while, what you'll need to do is download a newer ns4g build of 10.1 pull the Phone.apk and Settings.apk out of the build and put those in the patch.
Sent from my SPH-D700 using Tapatalk 2
any links for those? im on my phone and im finding nothing when searching. wont be in front of a pc until tomorrow.
thanks for the reply in either case.
I'll attempt to throw an updated patch together.
Sent from my SPH-D700 using Tapatalk 2
that would be amazing.. any idea how to get root back? lol.. ive tried a cpl zips with no luck.
I'm assuming you're on cm10.1. So make sure in Settings->Developer options that root access is granted to apps and that you're not using SuperSU.
Sent from my SPH-D700 using Tapatalk 2
---------- Post added at 02:10 AM ---------- Previous post was at 02:05 AM ----------
Alrighty, here it is. Let me know if it flashes okay or not. It'd be pretty awesome if it did considering I made it on my phone lol.
https://www.box.com/s/2o96nwluyjwn89jkq0ml
Sent from my SPH-D700 using Tapatalk 2
fixed the phone dialer
settings is gone (gone.. its no longer on app list) clicking settings from drop down does nothing. i think it got deleted.
if i re-install cm10.1 zip and gapps and reboot.. settings and root is there but the phone is gone again. (says its in airplane mode)
flash kernel and install your zip.. i got my phone back, but no settings again.
deleting something?
It shouldn't have deleted anything I took the patch you were using originally, swapped the kernel, Settings.apk and Phone.apk for the newer ones, zipped it back up and posted it. I'll look into it.
Sent from my SPH-D700 using Tapatalk 2
Yeah... Tried a wipe/reload and still same results.
Wiped/reloaded again and copied over phone.apk from recovery and rebooted (installed nitest-jb42_nr-twrp-0410 and nexusmodempatch_cm_10.1_ai0_(nitest-01-12kernel w jb-big men patch)) also.
Booted fine. Phone works. No root access.
Is that what the settings.apk file is for? I didn't install it. It won't install once the phone is booted up. Didn't want to just copy it over if it didn't need it.
So... Now I'm at the what do I need to do to root stage.
So to update. The phone works now. I wasn't able to use your zip in recovery- but I did pull the phone.apk out once the phone was booted and then rebooted to recovery and copied it over to system/app and once I rebooted my phone was working.
Still no root though.
Thanks a ton for the phone fix.
Maybe a permissions issue with the settings apk? Have you tried fixing permissions in recovery?
Sent from my SPH-D700 using xda premium
So here's the final fix that worked for me. Couldn't have done it without those updated files 'phone.apk' and 'settings.apk'.
From a clean wipe/install (system, data, cache, etc.. everything was blank) I think you could do this on any phone running the latest 10.1 that uses this kernel/modem though. I don't think you need to wipe/reload. Definitely worth trying.
From Recovery:
Installed latest CM-10.1-2013xxxx-NIGHTLY-epicmtd.zip
Installed gapps-jb-20121212-signed.zip
Installed nitest-jb42_nr_twrp-0410.zip
Installed nexusmodempatch_cm_10.1_AIO_(nitest-01-12 kernel w JB-Big Mem patch).zip
(might have rebooted into recovery after installing jb42 can't remember - if you get a error flashing the modem patch that was a fix for me - then I could install it)
Have the new phone.apk and settings.apk files on your flash card.
(pulled them out of the file initially listed in this post - they were in the system/app folder)
In TWRP - click Mount and check "Mount System" then hit the back button.
Click Advanced button, File Manager, sdcard and browse to where you have the new phone/settings apk files. Click phone.apk and select copy file.
Click system then app and click the 'select' button bottom right.
Do the same for settings.apk
I got a error copying over settings.apk and had to do the following.
Delete the copy of settings.apk in your \system\app folder and try to copy the new version over.
I cleared both caches just because and everything booted fine.
Tons of thanks especially to jeffreyjicha for the files he sent and advice. Also to everyone else who made any suggestions/comments.
Just another tip, use updated gapps. Latest gapps version is 20130301
Sent from my SPH-D700 using Tapatalk 2
Well my phone is on CM10.1 now. I used the patch I posted and it worked for me with no problems. Could someone else verify this? That way it can be put in the NS4G Patch thread.
It worked? Were you coming from a complete wipe/reload? System/data/everything?
That's what I did and couldn't get the services.apk to install automatically.
Is the system memory size on these phones all the same?
I did wipe everything. Now that you mention it, I think it worked for me because I removed a bunch of system apps. I removed all the live wallpapers(but not livewallpaperpicker.apk) the video editor, GTalk(I don't use it), CMFileManager(I like ES), oh and I removed Email/Exchange apks. Also in /system/media I deleted the videos folder. After all that I think I had ~30MB of empty space in /system.
Edit: I also removed CMWallpapers( I use my own photos )
Sent from my SPH-D700 using Tapatalk 2
Related
Hey everyone,
When i turned my phone on today, i noticed that the Android Market is completely removed from my phone!
I have tried installing it again using a .apk and also tried installing it using a .zip and flashing it via recovery, but they both have not worked...
any idea on how i could get this back?
Rather than use an apk you've put on your SD card card yourself, use a file explorer to go to system\app and run vending.apk from there.
This worked for me when the market was missing after flashing a new rom recently.
I did get a couple of download errors when I first used the market, but after a couple of rebooted it was fine.
Posted telepathically. Oh yes.
wildcardspv said:
Rather than use an apk you've put on your SD card card yourself, use a file explorer to go to system\app and run vending.apk from there.
This worked for me when the market was missing after flashing a new rom recently.
I did get a couple of download errors when I first used the market, but after a couple of rebooted it was fine.
Posted telepathically. Oh yes.
Click to expand...
Click to collapse
It says "Activity not found - com.android.vending
No way!
Sorry man, I don't know what else to do.
Maybe it can be pushed or pulled or something through adb, but I don't know how to use this.
Keep asking though, someone will be able to help....
Posted telepathically. Oh yes.
maybe this zip will flash for you...?
Maybe you need to reflash your rom...what rom u using?
Sent from my HTC Desire using XDA Premium App
If you are on 3.1 still like I am, I bet you are getting extremely frustrated when the Update notification keeps popping up (Where is that damn never ask me again button??!!)
Well here is the fix! I do not take responsibility if this breaks your xoom, computer, or your face
First try deleting the zip file out of your /cache/ folder (did not work for me)
Then try replacing your build.prop file with the following
***Please note this has been only tested on Tiamat 1.1 rom running Android 3.1****
Instructions:<
ADB:
Extract build.prop to your ADB folder
ADB Remount (should say successful)
ADB push build.prop system/
ADB Reboot
Using Root Explorer, make system writable
move build.prop and replace exisiting
Reboot.
Why dont you want to update?
Sent from my MZ601 using XDA App
iccy said:
Why dont you want to update?
Sent from my MZ601 using XDA App
Click to expand...
Click to collapse
because the update offers nothing that I don't already have on my rooted and heavily modified version of 3.1.
It takes to long for me to get everything set up just the way I like it, so until an update actually gives us anything worth while, I'm content staying "back" at 3.1, with all the bells& whistles. I can read & write to my sd,overclock, undervolt, read & write to external drives, etc.
What am I missing from 3.2?
-Killed my Swype installation, which was a deal-breaker for me.
I just removed the zip from cache, said instal update then hit cancel when it failed to reboot and haven't had it since
Thanks!
Sent from my Xoom using xda premium
Psychokitty said:
because the update offers nothing that I don't already have on my rooted and heavily modified version of 3.1.
It takes to long for me to get everything set up just the way I like it, so until an update actually gives us anything worth while, I'm content staying "back" at 3.1, with all the bells& whistles. I can read & write to my sd,overclock, undervolt, read & write to external drives, etc.
What am I missing from 3.2?
Click to expand...
Click to collapse
Your right there fella,
Sent from my R800i using xda premium
dopediculous said:
I just removed the zip from cache, said instal update then hit cancel when it failed to reboot and haven't had it since
Thanks!
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
Where does it cache to?
EDIT - nevermind.. duh.. the cache...
For those wanting to stop the OTA nag, I've found that Solarnz's fix (modpack 3) for the Moray ROM works on the stock ROM as well.
help, i use Root Explorer and rename my build.prop to build.propo, and copy you build.prop in to 3.2 xoom system, after reboot allway stay in the honeycomb logo.... is their anyway to change back my build.propo to build.prop?? thanks~
mhz1000a said:
help, i use Root Explorer and rename my build.prop to build.propo, and copy you build.prop in to 3.2 xoom system, after reboot allway stay in the honeycomb logo.... is their anyway to change back my build.propo to build.prop?? thanks~
Click to expand...
Click to collapse
The file I posted was only for 3.1 Android systems. I would recommend restoring from a Nandroid backup, but if you do not have one you will need to jump on IRC so one of our genius's can assist you on restoring your original files.
I already applied this and I think it works.. Thank you very much...
No USER friendly! Sorry I can't create update.zip
Need Safestrap for BackUP and change permissions (chmod -R 755 /system/framework/framework-res.apk).
This mod can open for you full screen display in Razr M without loose toggle bar, just copy framework with style what you want to /system/framework dir, and change permission to file.
Files in zip for 4.1.1 & 4.0.4 Android.
noVbutton - no navibar in Vertical orientation, yes in Horizontal
noV-Hbutton - no navibar in Vertical orientation, no in Horizontal
origin - original file
Of course you can change all manually if decompile framework-res.apk and find file named dimens.xml
<dimen name="navigation_bar_height">18.0dip</dimen>
<dimen name="navigation_bar_height_landscape">18.0dip</dimen>
<dimen name="navigation_bar_width">42.0dip</dimen>
link to framework-res.apk http://forum.xda-developers.com/attachment.php?attachmentid=1763662&d=1361913475
Thank you! I've been trying to figure out if this could be done. Swapped in your file using Root Explorer on the phone, everything crashed (kinda expected). Rebooted, changed permissions, and now she's working great!
jjlangen said:
Thank you! I've been trying to figure out if this could be done. Swapped in your file using Root Explorer on the phone, everything crashed (kinda expected). Rebooted, changed permissions, and now she's working great!
Click to expand...
Click to collapse
Ugh, tried to follow in your footsteps but got totally screwed. Wasnt able to chmod, tried rebooting and stuck in bootloop
Developer only?
Does this work for the developer and regular versions? Anyone tried this with the official JB OTA from Verizon?
I used Root Explorer, not a terminal. Running on stock Verizon Jelly Bean, retail version.
Sent from my XT907
It Works!
Yeah, FINALLY! Get rid of that craptastic waste-of-space navbar.
If anybody want to know, here's how I did it:
Note: I used root explorer
1. I used my windows 7 machine to extract the version of framework-res I wanted.
In my case, i'm on the 4.1.1 JB Verizon OTA, so I chose the 4.1.1 noV-Hbutton.
2.Copy the framework-res of your choice to the root of your internal storage card.
3. Using your file manager (Root explorer in my case) copy the framework file from your internal storage to "\system\" NOT "\system\framework\". Note, if you do this step and it asks you if you want to overwrite "framework-res.apk" STOP!
4. Using your file manager, write down the permissions for your existing "\system\framework\framework-res.apk".
5.Go to the framework-res.apk you just copied "\system\framework-res.apk" and change permissions to match those of your existing framework-res file.
6. AFTER the permissions have been changed and verified (I exited completely out of root explorer, then re-opened it and double checked that the permissions where the same) you can safely move and over-write the file in "\system\framework\".
7. Here's the reason. If you just copy the modified framework file straight from your internal memory to its home in "\system\framework\" the permissions won't be right, and there is a VERY good chance you will end up in an endless bootloop. Copying the file to "\system" first gives you the opportunity to modify its permissions BEFORE overwriting the existing framework file.
Good luck!
Update: Not sure why, and it isn't causing any problems, but every time I reboot the phone, it goes through the "android is upgrading your apps" dialogue".
Guess I got lucky avoiding a bootloop. I just copied the new file, went to /system/framework, renamed the current file, and pasted in the new one. Then all the applications crashed, I rebooted, and changed the permissions. I did have to sign back into all my accounts (Google, Facebook, etc), but zero issues since then.
I'm still loving it! The nav buttons took up so much space. The new version of LMT that you can trigger from the bottom makes it perfect.
http://forum.xda-developers.com/showthread.php?t=1330150
Op you rock man! Thanks ks a ton!
Sent from my SCH-I815 using Tapatalk HD
kensdavid said:
Ugh, tried to follow in your footsteps but got totally screwed. Wasnt able to chmod, tried rebooting and stuck in bootloop
Click to expand...
Click to collapse
same thing happened to me
I got moved the new framework file into the folder except I accidentally deleted it at the same time. Everything started to "stop working" and after I did a hard reset recovery (wipe data/factory reset + wipe cache partition) it stays stuck on the "android" boot loop (past the motorola logo) any help on restoring my phone??
The framework in the OP doesn't work with Eclipse Rom so I recompiled it from the eclipse framework. Same instructions as OP just different file.
So to recover, this is for Eclipse 1.1 no buttons
https://www.dropbox.com/s/5ruaj1rr6klmici/framework-res.apk
If I helped you out toss the OP and I a thanks plz :good:
Stock TB
Clienterror said:
The framework in the OP doesn't work with Eclipse Rom so I recompiled it from the eclipse framework. Same instructions as OP just different file.
So to recover, this is for Eclipse 1.1 no buttons
If I helped you out toss the OP and I a thanks plz :good:
Click to expand...
Click to collapse
I would like to do this for TB. Are you using apktools?
im running cm10 beta on my razr m and i found that simply adding "qemu.hw.mainkeys=1", to the end of your build.prop without the " then reboot. This will make the bottom nav bar disappear.
I found this by accident attempting to make the nav bar translucent so im not sure why it works, but it does for me.
theycallmekenny said:
im running cm10 beta on my razr m and i found that simply adding "qemu.hw.mainkeys=1", to the end of your build.prop without the " then reboot. This will make the bottom nav bar disappear.
I found this by accident attempting to make the nav bar translucent so im not sure why it works, but it does for me.
Click to expand...
Click to collapse
It causes systemui.apk to FC on stock based ROMS. Great for CM10 based ROMs.
From the RAZR M
hillmom said:
I would like to do this for TB. Are you using apktools?
Click to expand...
Click to collapse
Yea just decompile the framework from the rom you want and edit the lines in the op to all zeros. It's located in the "values/dims.xml" (I think). Recompile apk then drop in the meta folder from the original framework inside the new framework (I used 7zip). Just copy to phone, set permissions, and reboot.
Sent from my XT907 using Tapatalk 2
Clienterror said:
Yea just decompile the framework from the rom you want and edit the lines in the op to all zeros. It's located in the "values/dims.xml" (I think). Recompile apk then drop in the meta folder from the original framework inside the new framework (I used 7zip). Just copy to phone, set permissions, and reboot.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Thanks. I must be missing something because every time I try to recompile I get the error'
Could not find sources.
Never mind, I made a dumb noob mistake. Got it. Thanks!
hillmom said:
Thanks. I must be missing something because every time I try to recompile I get the error'
Could not find sources.
Never mind, I made a dumb noob mistake. Got it. Thanks!
Click to expand...
Click to collapse
No problem, after you do it once it isn't a big deal
Sent from my XT907 using Tapatalk 2
hillmom said:
Thanks. I must be missing something because every time I try to recompile I get the error'
Could not find sources.
Never mind, I made a dumb noob mistake. Got it. Thanks!
Click to expand...
Click to collapse
So what was the mistake you made when trying to recompile?
Sent from my XT907 using Tapatalk 2
sniperkill said:
So what was the mistake you made when trying to recompile?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I'm using APK Multi Tool, and I didn't install the framework-res.apk for 4.1.1 first.
Sent from my XT907 using Tapatalk 2
hillmom said:
I'm using APK Multi Tool, and I didn't install the framework-res.apk for 4.1.1 first.
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Oh, and okay. I know when jelly bean and ICS first came out everyone was having a hard time with recompiling the .apk's from ics and jb. I haven't tried it since. I'm assuming that they must have fixed all that by now?
Sent from my XT907 using Tapatalk 2
sniperkill said:
Oh, and okay. I know when jelly bean and ICS first came out everyone was having a hard time with recompiling the .apk's from ics and jb. I haven't tried it since. I'm assuming that they must have fixed all that by now?
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
Yes, they did update them. I tried earlier with an older utility, and was getting really frustrated because I couldn't get the apk to recompile. APK Multi Tool os awesome, I need to play with the themeing tools it has.
Sent from my XT907 using Tapatalk 2
OK Guys as promised
Here is the stock debloated pre rooted flashable rom
for E988 and E980
as Stock no screenshots..
Features
zip alligned
optimized apps
Stock Theme
debloated
ultra fast
best battery life
tweaked for better battery
tweaked for better wifi speeds
tweaked for better CPU control
tweaked for better 3g /4g speeds
better touch response
additional tweaks i dont remeber
deodexed coming soon...
instructions
1.copy the rar to desktop extract to a folder
2. copy the folder to clockworkmod\backup on your sd card
3. reboot to recovery and restore
4. no wiping necessary reboot ..if you are E980 ATT , then proceed to next step
5. Along with the above rar file download the E980 Baseband and flash it post restore of the folder. and reboot.
link --- http://storagecow.eu/index.php?dir=Xda/Users/Anirudhks-OptimusGPro/
file : stock.rar
E980 baseband for E980 users
http://storagecow.eu/index.php?dir=Xda/Users/Anirudhks-OptimusGPro/
currently ROM uploading please check the links after 2 hours may as the original size is about 850MB
if you like my work hit thanks .....
buy me a beer or a coffee if you would like to
Make sure you flash your Baseband for your correct phone right after flashing the Rom or you wont have signal/Service.
Also I have edited the basebands due to whoever orginally created them added bougus Build.Prop and also added on screen menu buttons to the flash so I have removed them from the below baseband so you wont have the bougus Build.Prop and the on screen buttons at the bottom.
AT&T E980 BaseBand - http://storagecow.eu/index.php?dir=Xda/LG+Optimus+G+Pro/Modems/AT&T+E980+Baseband/
finally figured out the issue for the flashable zip , quite late here now will upload flashable zip tomorrow...
but issue fixed
edit : i loose the visibluty of sdcard.. allthough i can browse from the root broswer doest show up in the file manager,,, looking still into it..
anirudhks said:
finally figured out the issue for the flashable zip , quite late here now will upload flashable zip tomorrow...
but issue fixed
edit : i loose the visibluty of sdcard.. allthough i can browse from the root broswer doest show up in the file manager,,, looking still into it..
Click to expand...
Click to collapse
Okay Thanks
Is this good for F240L?
Subscribed
Sent from my LG-E980 using Tapatalk 2
hyelton said:
Make sure you flash your Baseband for your correct phone right after flashing the Rom or you wont have signal/Service.
Also I have edited the basebands due to whoever orginally created them added bougus Build.Prop and also added on screen menu buttons to the flash so I have removed them from the below baseband so you wont have the bougus Build.Prop and the on screen buttons at the bottom.
AT&T E980 BaseBand -
Click to expand...
Click to collapse
Where is the one you edited? I think I have the one with the soft keys..
Sent from my LG-E980 using xda app-developers app
esimon311 said:
Where is the one you edited? I think I have the one with the soft keys..
Sent from my LG-E980 using xda app-developers app
Click to expand...
Click to collapse
Sorry meant to add link here ya go !
http://storagecow.eu/index.php?dir=Xda/LG+Optimus+G+Pro/Modems/AT&T+E980+Baseband/
You will prob have to wipe and reinstall the rom and this baseband to make it go away
hyelton said:
Sorry meant to add link here ya go !
http://storagecow.eu/index.php?dir=Xda/LG+Optimus+G+Pro/Modems/AT&T+E980+Baseband/
You will prob have to wipe and reinstall the rom and this baseband to make it go away
Click to expand...
Click to collapse
K thanks.
Sent from my LG-E980 using xda app-developers app
Ok I flashed this earlier today. Everything's running great, it's fast responsive no lag, my CPU is deep sleeping like a bear in the winter. I'm loving it. Only problem I have is I'm getting an error when I try and download something from the play store....
I've tried wiping my play store apps data, didn't help, I even went so far as to reinstall the play store app manually, no go.... WTF, any ideas people...:banghead:
When the fu€k did we get ice cream?
esimon311 said:
Ok I flashed this earlier today. Everything's running great, it's fast responsive no lag, my CPU is deep sleeping like a bear in the winter. I'm loving it. Only problem I have is I'm getting an error when I try and download something from the play store....
I've tried wiping my play store apps data, didn't help, I even went so far as to reinstall the play store app manually, no go.... WTF, any ideas people...:banghead:
When the fu€k did we get ice cream?
Click to expand...
Click to collapse
I've had that same error when I updated to 4.3 on my Nexus 7. What I did to fix it was remove the Google Account under settings and login again and accepting the user terms and stuff again.
when i tried restoring in clockworkmod 6.0.3.3, recovery tells me that no files were found.
I put the extracted contents of the stock.rar into the clockworkmod\backup directory in the sdcard but no go
did the same in my internal and obviously, no go. am i missing something?
thanks for your work by the way!!
esimon311 said:
Ok I flashed this earlier today. Everything's running great, it's fast responsive no lag, my CPU is deep sleeping like a bear in the winter. I'm loving it. Only problem I have is I'm getting an error when I try and download something from the play store....
I've tried wiping my play store apps data, didn't help, I even went so far as to reinstall the play store app manually, no go.... WTF, any ideas people...:banghead:
When the fu€k did we get ice cream?
Click to expand...
Click to collapse
remove your google account and re add that will fix
k0p4n said:
when i tried restoring in clockworkmod 6.0.3.3, recovery tells me that no files were found.
I put the extracted contents of the stock.rar into the clockworkmod\backup directory in the sdcard but no go
did the same in my internal and obviously, no go. am i missing something?
thanks for your work by the way!!
Click to expand...
Click to collapse
you will just need to put the folder which has the date format like the 1970.25 something not the folder name which has stock....
anirudhks said:
you will just need to put the folder which has the date format like the 1970.25 something not the folder name which has stock....
Click to expand...
Click to collapse
oh didn't think you meant to move the folder literally haha
got it working thanks!
I was using this and noticed that the signal cuts off randomly then reconnects. I flashed the baseband.
Also the issue with downloading apps from the play store reappears. I would remove the account and re-add the account and it would fix the problem but then reappear.
Sent from my LG-E988 using XDA Premium 4 mobile app
k0p4n said:
I was using this and noticed that the signal cuts off randomly then reconnects. I flashed the baseband.
Also the issue with downloading apps from the play store reappears. I would remove the account and re-add the account and it would fix the problem but then reappear.
Sent from my LG-E988 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
what you can do is use root explorer or browser and go to system/apps and delete the playstore and reinstall it from the web or apk google it you shuold get a latest one... that will fix the issue ,
for signal I know the issue I will add a patch , its due to the increase in network throttle added so if signal gets a little weak it drops and tries to reconnect
What APN settings are you guys running to get LTE..?
When the fu€k did we get ice cream?
anirudhks said:
what you can do is use root explorer or browser and go to system/apps and delete the playstore and reinstall it from the web or apk google it you shuold get a latest one... that will fix the issue ,
for signal I know the issue I will add a patch , its due to the increase in network throttle added so if signal gets a little weak it drops and tries to reconnect
Click to expand...
Click to collapse
Great thanks! Ill try that. By the way I am NOT using the E988. I have the E980 from ATT.
---------- Post added at 07:47 AM ---------- Previous post was at 07:32 AM ----------
anirudhks
I saw in the other xperia thread you asked if anyone wanted an aosp rom and its kinda funny but thats what i thought this rom was lol but stock meant factory stock not aosp.
Anyway, i think ppl would rather have you focus your energy on a an aosp one than a debloated lg one, tho both are important. The aosp one needs more work of course so yea. Looking forward to that network patch, thanks!
Sent from my LG-E988 using XDA Premium 4 mobile app
flashed all works well, but there is no Russian language interface = (
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
So what kernel are you using?
I am dowloading it right now! Does the sim working properly since there is difference in modem!
Finally installed it. All cm features are missing
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Err....
Well, I can't say anything. I'm working on porting cm11 from the Note 2 LTE to the S3. If that works, I'm porting cm12 to the s3, hopefully.
Yeah it's an alpha build so the bells and whistles of cm features aren't available. It's basically just a working version of 5.0. As time goes on they will add the bells and whistles.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Its actually an almost perfect build for me... Only issue is camera and contacts fc when a synced contact's name is more than one word.... Even had faster GPS lock than 4.4 roms...
Don't seem to miss cm features as I don't use much... Just probably on screen buttons and skip tracks with volume button is what I'm missing
Running this on my phone. It was kind of wonky at first but after 2-3 wipes/flashes this is the best ROM I have ever run on this phone.
If you get tons of force closes, no root, and can't seem to download anything wipe and re flash.
As of now everything is working for me(including the camera using nexus camera).
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Test builds V4 is running great, ive been running it for 2 days and ive had 0 FC's! just camera doesnt work, but you can download an alternate camera from the play store (nexus camera or camera zoom FX works for me). All you have to do before flashing is modifying the "updater script", open and edit the updater script and just replace all "d2att" with "d2tmo", save changes. Do a clean flash. I use the usual apps (fb, tw, whatsapp, a couple basic games) and everything works well. I dont use any apps that use the camera (vine, instagram, etc) so I cant report on those. No need to flash a kernel or different radio.
V5 is working fine for me. Everything works except video recording(pictures work with Nexus Camera) and cast screen on Chromecast. I tried the fix for the Nexus 7 but it disconnects immediately.
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
just remove the first line and then try ?
Sent from my SGH-T999 using XDA Free mobile app
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
allendj81 said:
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
Click to expand...
Click to collapse
I dont suppose you could share the file? For the rest of us.
patrickae said:
I dont suppose you could share the file? For the rest of us.
Click to expand...
Click to collapse
I rather not, for some reason the guy who put together the zip took down the thread and his account is suspended, who knows what happened. Its very easy to modify tho, give it a try.
i took a day or so by finally got my son s3 working
The current build is build 5 dated 11/25. It works better than build 4. You can use a few different cameras but stock camera still not working right. If you use Philz touch recovery you don't need to modify the script, it will flash just fine. It will say your phone is an i747 but that is just cosmetic it changes nothing with functionality like data or calls, etc. Because this is just a software rom and doesn't change anything hardware specific. Enjoy.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Thank you...
rcurtis805 said:
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Where is the download link? I have been looking all over the place for CM12 on T999
I tried changing all the d2att to d2tmo and it is all changed but when I try to flash it, it gets a couple fail messages about mounting something and then I try to reboot it gets stuck in bootloop.
When I try to flash without changing the d2att it won't even flash.
Anyone got V5?