[Q] Nfc turn on Bluetooth when sharing? - T-Mobile, Samsung Galaxy SIII

well when i sharing a video or pic via nfc i see bluetooth icon appear and when check in notification bar is activate, in my mom phone galaxy s2 t989 appear too but turn off when sharing process finish...but in my s3 dont turn off automatically...so is normal bluetooth turn on when sharing via nfc?

Same happens with me
Sent from my SGH-T999 using xda premium

serio22 said:
Same happens with me
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I noticed this happens when two different versions of Android are connecting - AOSP to TouchWiz for example. I'll assume you're running a variation of AOSP and your mother is running factory TouchWiz? Go back to TouchWiz and try again, it won't turn on your bluetooth.
Now, no, I have no idea still why it turns on bluetooth instead of using NFC. It would be interesting to put the different version of Android together to see how each interacts with one another - AOSP, Sense, TouchWiz, Optimus, Experia, Motoblur, etc and see what happens.

Don_Perrignon said:
I noticed this happens when two different versions of Android are connecting - AOSP to TouchWiz for example. I'll assume you're running a variation of AOSP and your mother is running factory TouchWiz? Go back to TouchWiz and try again, it won't turn on your bluetooth.
Now, no, I have no idea still why it turns on bluetooth instead of using NFC. It would be interesting to put the different version of Android together to see how each interacts with one another - AOSP, Sense, TouchWiz, Optimus, Experia, Motoblur, etc and see what happens.
Click to expand...
Click to collapse
Never done it with aosp, only with touchwiz to touchwiz, and to a razr m.. its really not a big deal to me but I was just reporting
Sent from my SGH-T999 using xda premium

serio22 said:
Never done it with aosp, only with touchwiz to touchwiz, and to a razr m.. its really not a big deal to me but I was just reporting
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hmm. I know when two S3s do it, Bluetooth doesn't turn on. So, then I guess the Note and Galaxy have slightly different versions of TouchWiz. I guess, I don't know.
Sent from my Galaxy Nexus using xda premium

Don_Perrignon said:
I noticed this happens when two different versions of Android are connecting - AOSP to TouchWiz for example. I'll assume you're running a variation of AOSP and your mother is running factory TouchWiz? Go back to TouchWiz and try again, it won't turn on your bluetooth.
Now, no, I have no idea still why it turns on bluetooth instead of using NFC. It would be interesting to put the different version of Android together to see how each interacts with one another - AOSP, Sense, TouchWiz, Optimus, Experia, Motoblur, etc and see what happens.
Click to expand...
Click to collapse
both run stocks rom...not root or custom recovery, my s3 run jelly 4.1.1 and the s2 run 4.1.2 official versions

santana_pr said:
both run stocks rom...not root or custom recovery, my s3 run jelly 4.1.1 and the s2 run 4.1.2 official versions
Click to expand...
Click to collapse
Then still, it must be there versions of TouchWiz. Two S3 will not turn on bluetooth.

Two s3's sharing will initiate the connection via nfc and will complete the transfer via WiFi direct (better transfer bandwidth and range so the devices don't have to remain touching). Dissimilar devices must use bluetooth when WiFi direct is unavailable.
Sent from my SGH-T999

yes i can confirn that...few moments ago do this with 2 galaxy S3 and dont activate bluetooth...test with other phones like S2 or Note 2 turn on bluetooth...so think this issue is resolved...thanks for your tips

Bluetooth switches ON during NFC transfer
I tried transferring media between Sony Xperia M and Sony Xperia L. The transfer takes place via bluetooth and not through NFC. The android versions are same on both the phones. Why does this still occur?

santana_pr said:
well when i sharing a video or pic via nfc i see bluetooth icon appear and when check in notification bar is activate, in my mom phone galaxy s2 t989 appear too but turn off when sharing process finish...but in my s3 dont turn off automatically...so is normal bluetooth turn on when sharing via nfc?
Click to expand...
Click to collapse
Do Note, given the same Antenna for NFC and Bloetooth, the same undelying APK controls both. So Android Beam may activate both. Perfectly normal.
ashrith.athreya said:
I tried transferring media between Sony Xperia M and Sony Xperia L. The transfer takes place via bluetooth and not through NFC. The android versions are same on both the phones. Why does this still occur?
Click to expand...
Click to collapse
Sony's implementation of NFC has been traditionally flaky. Plus see what I responded above.

that happens to both of my s3s. just checked.

m0nke10fdajung1e said:
that happens to both of my s3s. just checked.
Click to expand...
Click to collapse
Depends on Rom and Kernel. Possibly the code activated the icon. As I said earlier, the Antenna is the same.

Hmm. Same thing happens on my s3 but in a different situation. When I open bluetooth to transfer files and finished transferring, the nfc automatically turns on. I notice this prob after the update. Is there any software or hardware issue on my phone.. thanks

Related

Wifi-direct

Hey guys
I treid today to use the wifi direct function but i cant configure like the sgs2,.
Tryin to send a movie from a sgs2 to my GN but it didn't work anyone an idea or some help
Thnx in advance
Sent from my Galaxy Nexus using xda premium
Same here. This morning I tried to setup Wifi-Direct on GN but was a no go. My SGS2 has Wifi direct configuration where you can name your device and setup password etc plus scan for other devices. GN however doesn't have anything like this and you can only turn it ON or OFF. SGS2 scanned for 2 mins and wasn't able to see GN.
Do I need any applications or is there something that myself and OP is missing?
I tried this this morning with a coworker who has a GN too but couldn't figure it out. I also tried the beam thing which says you can just magically hold them back to back and it works? Are there apps that need to be installed to get these things working?
Anyone have any links to literature on beam and wifi direct?
Bump.
This thing does seem odd enough to be worthy of some bumping.
Sent from my Galaxy Nexus using Tapatalk
what is wifi direct?
citrix80 said:
what is wifi direct?
Click to expand...
Click to collapse
It's a new technology that should allow compatible devices to connect to each other over wifi to transfer files without an access point. Pretty much an ad hoc type network.
I would assume we should be able to use it to connect to other GN but it MAY just be OS support and we need an actual application to make it work?
Bump. This is incredibly annoying.
Zenoran said:
I tried this this morning with a coworker who has a GN too but couldn't figure it out. I also tried the beam thing which says you can just magically hold them back to back and it works? Are there apps that need to be installed to get these things working?
Anyone have any links to literature on beam and wifi direct?
Click to expand...
Click to collapse
Beam works fine. Try opening a homepage, and it will ask to transmit when touching another Nexus
Sendt fra min Galaxy Nexus
Seems like maybe they have only baked the API into the OS, but we need devs to create apps that make it useful, based on the Platform Highlights for 4.0 and the Demo app they released. Bummer. Some patient waiting to do, I guess.
I've searched the market for a "wifi-direct" app but there doesn't seem to be one.
Anyone else found anything?
Apparently not a very popular option among people out there.
bump. ytd nite trying to transfer all the songs and ringtones from my GalNote to GalNex using wifi direct, then dunno how to proceed cz totally cant find any settings or configuration in GalNex. enabled both wifi direct, den GalNote can detact my GalNex but failed to connect :X
Bump. My brother has sgs2 and I looked dumb trying to try wifi direct....nothing happens. No options besides on/off
Sent from my Galaxy Nexus using xda premium
Me too, I tried setup my gn wifi direct, but it w/o any setting, then i use my bro s2 to search my gn mobile, s2 search the name called android xxx, i think this is my mobile, bcs when i off my gn wifi direct, s2 cant search any mobile, when i tried connect my gn mobile, but finally after i wait over 2 mins it still not success.
I think we can conclude if you need to check with forums on the internet and still haven't started transmitting anything two weeks later, it's not a very "direct" sort of technology.
So people at the office have Wifi-direct and I have Android beam. And neither works with each other.
This is Android-awesomeness right now.
Anyone found out how it works? sorry for the bump but good be very useable...
I haven't tried this but it is at least a suggestion. Try opening the gallery, opening a picture and then hitting the share button. Maybe there is an option in there for wi-fi direct?
EDIT: Nevermind. Looks like I mis-understood what this feature was.
Check out this to see if it helps?
http://developer.android.com/resources/samples/WiFiDirectDemo/index.html
http://developer.android.com/reference/android/net/wifi/p2p/package-summary.html
"remember that the feature is supported only on Android 4.0 (API level 14) and higher versions of the platform. " So looks like you have to connect to another device running ICS
wifi is there but not functional yet
guys in galaxy nexus the capability to use WIFI direct is there but not programmed and left to be added as an add on or so .. developers need to make a program or even a rom to enable this feature but most likely google will adapt the samsung software for wifi direct just like SGSII ..
hope someone just develop it soon
Yep it's purely an api for developers to use in order to connect to the same app(or another one with an official api) running on another device.
Google may very well add this into the gallery and so on, but for now it's a developer option. The implementation on the sgs2 on the other hand does not allow for developers to add in AFAIK and it's purely for use in the samsung apps.
I compiled and installed that WifiDirectDemo app and it doesn't really work. The GN and SGS2 see each other but the connection does nothing.

[APP] Samsung Smart view Dual View

Works on Many Samsung TouchWiz based ROMs. Confirmed Working on Galaxy S2, S3, Tab 10.1
For some reason, beyond my comprehension, Samsung have this great app, but have yet to open it up to the SGS3. I have been resorting to downloading it and installing it on my HTC HD2 (Running CM9) backing it up with Titanium, and then copying the backup over to my SGS3, and restoring the backup. A bit round about, but works.
The App, for those that don't know, allows you, with a Samsung high-end TV or BR-Player, use the app to not only as a remote, but as a second mirrored screen, with audio. Great for trips to the kitchen, bathroom, outside, or in another room (although range is limited by your router).
[Supported TV Models]
- Samsung Smart TV released in 2011:
Models greater or equal to LED 7000, PDP 8000
- Samsung Smart TV released in 2012:
Models greater or equal to LED ES7500,(Models greater or equal to LED ES7000 in Europe, Models greater or equal to PDP E8000 Models(E7000 Models in North America)
[Supported Phone]
While technically only SGS2, it works with SGS3 stock rooted rom, but should work on most with a stock base. It will not work on CM9/10 and ASOP ROM's but you could give it a try and let me know.
Here is the actual app, I extracted it from my Titanium backup figuring someone could use it until Samsung get around to updating the Market to let you just download it. The only thing I can't get to work is Bluetooth power on. I can pair with my TV, but it just doesn't show up until I have turned it on. I also had an issue with it working over the the 5Ghz 802.11n band, but with 3.1.9 that doesn't seem to be an issue anymore.
Version 3.1.9 - 39MB - Confirmed Working for me with 2011 PDP51D8000 Model
Version 3.2.0 - 40MB - Also Confirmed working
Older Version 3.1.7 for those of you with issues
The Full description from Google Play:
[About the Application]
This application is Wi-Fi remote control for Samsung Smart TV. If both your phone and TV are connected to the same wireless Router, your phone will link to the TV automatically where you can use your phone like a remote control. The TV can also transfer live feeds to your phone.
[Main Features]
- Dual View
Enjoy TV and other multimedia right from your mobile device that’s connected to Samsung Smart TV. You can even send what you’re watching on your mobile device to TV and watch it from TV.
- Bluetooth PowerOn {I will add, never got this to work, despite pairing TV}
You can use your mobile device to turn on your TV using Bluetooth (available for certain TV and mobile devices only).
- Remote
Your mobile device can work as remote for your Samsung TV or BD products. Full remote screen is provided by default, and three tabs are provided at the bottom of the screen to help you control connected devices with ease. On screen keyboard shows up automatically when you need to enter text.
- Game Controller
With this feature, your mobile device can control games on TV. Full and Simple modes are available. Turn on Gyro function on your mobile device, and control games by tilting your mobile device.
- Movie Note (Models BD-E5900 or above, HTE4000or above (US only))
You can get information of DVD/BD title on your mobile, while you watching movies.
Ratings, synopsis, cast and director's information will be provided.
- Audio Settings (Models HT- E4000 or above)
You can control your speaker system by your phone.
Sound mode, distance of each speaker and sound level(dB) can be changed.
- Remote Scheduler (Models BD-E8000 series, STB-E7000 series EU/Australia/New Zealand Only)
Recording TV shows through your TV when you're outside.
- Settings
You can fine-tune control for TV and BD by adjusting gesture sensitivity in your mobile device.
[How to set up]
1.Check if Wireless Remote Control or Network Remote Control is enabled in your TV’s System or Setup menu. If you don’t see either of them in the menu, Samsung Smart View App can’t be used in your mobile device.
2.Connect wireless/wired router to TV LAN port, or connect Samsung Wireless LAN adapter to TV USB port.
3.Connect your phone to wireless/wired router.
Saving this potentially for a place to list the Rom's it works with. for now it is just:
T-Mobile Stock
T-Mobile Stock-Rooted
That, and isn't that what all the cool posts do
Thank you so much for this. I been lookibg for this app and its weird its not supported on samsungs flagship phone
Sent from my SGH-T999 using xda app-developers app
mastermindx85 said:
Thank you so much for this. I been lookibg for this app and its weird its not supported on samsungs flagship phone
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Glad it helped, It just doesn't make sense to not allow the direct download. It clearly works on the SGS3, so it makes no sense. They have also updated the app several times since the SGS3 release 3.17 was the version I first installed. So they are working on the app, just wish they would switch it on for us to access right from market.
P.S. If this app helped you, please hit thanks
Don't work for me with UE7000D! Galaxy SIII - stock no brand rom ITA no root- Any suggestions for me? Thank you...
Gio72_ said:
Don't work for me with UE7000D! Galaxy SIII - stock no brand rom ITA no root- Any suggestions for me? Thank you...
Click to expand...
Click to collapse
You may have to look around your TV menus for the option to turn on networked remotes. I had an issue where I somehow disabled my phone and could not get it to connect. Also are you using a 2.4ghz or 5ghz router, if using one, try the other. Finally check your router settings, to see if there is something there preventing connectivity.
nygmam said:
You may have to look around your TV menus for the option to turn on networked remotes. I had an issue where I somehow disabled my phone and could not get it to connect. Also are you using a 2.4ghz or 5ghz router, if using one, try the other. Finally check your router settings, to see if there is something there preventing connectivity.
Click to expand...
Click to collapse
Unfortunately, all this has already been verified. Consider that already use a Samsung Galaxy SII and it works great, therefore the router is fine. Among the other with the 'SIII the program works, but also sees the TV when the connection is disconnected after a few seconds by sending an error message that says: "the first use to connect to the internet" .... ideas?
Gio72_ said:
Unfortunately, all this has already been verified. Consider that already use a Samsung Galaxy SII and it works great, therefore the router is fine. Among the other with the 'SIII the program works, but also sees the TV when the connection is disconnected after a few seconds by sending an error message that says: "the first use to connect to the internet" .... ideas?
Click to expand...
Click to collapse
I am not exactly sure what you are seeing. Are you using a stock rom? If you see the TV in the list, but Dual View is not working, then it isn't seeing your phone as supported for Dual View. This could be a build.prop issue, or a necessary file is missing. If it isn't seeing your TV, then there is a connection issue. This is what I had with 802.11n 5Ghz. When on 5Ghz, I couldn't see my TV, back to 2.4Ghz and all was fine. I thought this issue resolved on 3.19.
You may try resetting your router, trying it insecure to see if you can get it to work, but I guess it can be a bit flakey for some. There is nothing inherent in the application, that I know of, that should prevent it from working on the SGS3, unless the ROM you are using is modified. In that case, make a Nandroid backup, install a stock (Rooted if you like) ROm and test again, if it works, it is your ROM, if it doesn't, it is your network.
nygmam said:
I am not exactly sure what you are seeing. Are you using a stock rom? If you see the TV in the list, but Dual View is not working, then it isn't seeing your phone as supported for Dual View. This could be a build.prop issue, or a necessary file is missing. If it isn't seeing your TV, then there is a connection issue. This is what I had with 802.11n 5Ghz. When on 5Ghz, I couldn't see my TV, back to 2.4Ghz and all was fine. I thought this issue resolved on 3.19.
You may try resetting your router, trying it insecure to see if you can get it to work, but I guess it can be a bit flakey for some. There is nothing inherent in the application, that I know of, that should prevent it from working on the SGS3, unless the ROM you are using is modified. In that case, make a Nandroid backup, install a stock (Rooted if you like) ROm and test again, if it works, it is your ROM, if it doesn't, it is your network.
Click to expand...
Click to collapse
As I wrote in my previous post using a stock ROM no brand ITA and my Galaxy SIII is not rooted. As for the router I do not think the problem here as with my Galaxy SII ICS 4.0.3 works perfectly! The Galaxy SIII see TV but while trying to connect it disconnects giving me this error: "connect for the first time you need to connect to the internet". Help me please!
Inviato dal mio Samsung Galaxy SIII
Gio72_ said:
As I wrote in my previous post using a stock ROM no brand ITA and my Galaxy SIII is not rooted. As for the router I do not think the problem here as with my Galaxy SII ICS 4.0.3 works perfectly! The Galaxy SIII see TV but while trying to connect it disconnects giving me this error: "connect for the first time you need to connect to the internet". Help me please!
Inviato dal mio Samsung Galaxy SIII
Click to expand...
Click to collapse
From the router side I would agree, if you see the tv in the app, router is fine. The only thing I can think of is if this is an ITALIAN version issue. I know that when upgrading to ICS some stock ROMs for the SGS2 stopped working. I think this may be the case and something in the localization is causing the connection issue.
In your case maybe try to port the app over from your sgs2 as it could also contain something specific. You can use my method from the first post. Otherwise I am afraid you may need another rom but that's also going to depend on what ROMs it runs on. I only know it works on US T-Mobile but with close to 300 downloads yours is the first time I have seen it not work so there is hopefully a stock based ROM for you with enough not removed to let this app work.
Sorry it isn't better news. As a last resort, you could try to factory reset, install only this app. That way you can ensure no other app is interfering.
Good luck, let me know how it works out.
Sent from my SGH-T999 using xda premium
nygmam said:
From the router side I would agree, if you see the tv in the app, router is fine. The only thing I can think of is if this is an ITALIAN version issue. I know that when upgrading to ICS some stock ROMs for the SGS2 stopped working. I think this may be the case and something in the localization is causing the connection issue.
In your case maybe try to port the app over from your sgs2 as it could also contain something specific. You can use my method from the first post. Otherwise I am afraid you may need another rom but that's also going to depend on what ROMs it runs on. I only know it works on US T-Mobile but with close to 300 downloads yours is the first time I have seen it not work so there is hopefully a stock based ROM for you with enough not removed to let this app work.
Sorry it isn't better news. As a last resort, you could try to factory reset, install only this app. That way you can ensure no other app is interfering.
Good luck, let me know how it works out.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Ok thanks for reply, I will try to extract the app from my SGSII and try it. Can I extract the app only with Titanium Backup? Is there another method? As I said before the terminal is not rooted...
Inviato dal mio Samsung Galaxy SIII
smartview not working on galaxy s3
I have downloaded the app from your previous post, however when I try to open it, it flashes on and off and I can see it discovered the tv but it flashes black before I can select it. Any one else experience this problem?
SuperStoner said:
I have downloaded the app from your previous post, however when I try to open it, it flashes on and off and I can see it discovered the tv but it flashes black before I can select it. Any one else experience this problem?
Click to expand...
Click to collapse
It's almost the same problem! Which device are you using?
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Gio72_ said:
It's almost the same problem! Which device are you using?
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Click to expand...
Click to collapse
Sprint Samsung Galaxy SIII unrooted running ICS
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Might I add this app was working previously with the un55c7000 and HTC evo 3d, and evo 4g. Previously working on SGSII before ICS update now flashes black in the same fashion as the SIII. All previous models were able to download from play store however none supported the dual view.
SuperStoner said:
Sprint Samsung Galaxy SIII unrooted running ICS
---------- Post added at 08:38 AM ---------- Previous post was at 08:33 AM ----------
Might I add this app was working previously with the un55c7000 and HTC evo 3d, and evo 4g. Previously working on SGSII before ICS update now flashes black in the same fashion as the SIII. All previous models were able to download from play store however none supported the dual view.
Click to expand...
Click to collapse
Have you tried both versions?
I love these kinds of apps I'll see if I can get it working.
Sent from my SGH-T999 using xda premium
nygmam said:
Have you tried both versions?
Click to expand...
Click to collapse
I will and will not work with either
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Gio72_ said:
I will and will not work with either
Inviato dal mio Samsung Galaxy SIII con Tapatalk 2
Click to expand...
Click to collapse
Sorry to hear. Not sure what the issue is, I just updated my ROM, and it still works well for me, not that that helps you
nygmam said:
Sorry to hear. Not sure what the issue is, I just updated my ROM, and it still works well for me, not that that helps you
Click to expand...
Click to collapse
Oh how I wish this worked on LG smart tv's too....
civicvx94 said:
Oh how I wish this worked on LG smart tv's too....
Click to expand...
Click to collapse
+1
I know.. I have the 55" Cinema 3D LED and I'm kind of pissy that you have to have an LG phone to do this

Bluetooh problems

Anyone having bluetooth disconnections after upgrade to JB ?
wtf2012 said:
No.
Click to expand...
Click to collapse
lol, thanks. Actually i was hoping an answer from anyone having problems.
I was having them quite often, figured out it was only when I had DSP manager or Awesome beats installed AND set to modify the bluetooth sound. Not sure if this is your case or not but thought I would chime in. To fix I just unchecked ALL options under bluetooth then unpaired. (Turn off BT go into BT on phone, unpair, turn BT on phone off, reboot phone) then I repaired and no more disconnects.
G-Nexus Sent
I've been having this problem with my Sony head unit and GN. It takes a couple tries for a2dp to connect and will randomly disconnect. Happened on ICS too.
Stock rooted.
Sent from my Galaxy Nexus using Tapatalk 2
ifly4vamerica said:
I was having them quite often, figured out it was only when I had DSP manager or Awesome beats installed AND set to modify the bluetooth sound. Not sure if this is your case or not but thought I would chime in. To fix I just unchecked ALL options under bluetooth then unpaired. (Turn off BT go into BT on phone, unpair, turn BT on phone off, reboot phone) then I repaired and no more disconnects.
G-Nexus Sent
Click to expand...
Click to collapse
Well , i dont use any of those applications :/
s9ortner said:
I've been having this problem with my Sony head unit and GN. It takes a couple tries for a2dp to connect and will randomly disconnect. Happened on ICS too.
Stock rooted.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I got lots of disconnections from my car audio system.
My heart rate monitor and nokia head set disconnects too much. Over 5 times in one hour.
My wife's GN also disconnects from her Kenwood head unit. Far less frequently than mine, but it happens. I'm surprised more people haven't chimed in on this issue. My dad just got his GN yesterday so I'll check his tonight to see if it too suffers from this problem.
Sent from my Galaxy Nexus using Tapatalk 2
s9ortner said:
My wife's GN also disconnects from her Kenwood head unit. Far less frequently than mine, but it happens. I'm surprised more people haven't chimed in on this issue. My dad just got his GN yesterday so I'll check his tonight to see if it too suffers from this problem.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
at least i am not the only one with problems. Since i never tested bluetooth in stock ICS i thought it could be some hardware problem. But apparently other people have too ...
I had no such issues. I use it with a Plantronic 925 and a Gear4 BT stereo speaker, none if them working differently than they did on ICS.
Sent from my Galaxy Nexus using xda app-developers app
I haven't had problems with Bluetooth audio. When I use Bluetooth File Transfer between my Xoom and Gnex, I can view my Xoom's file system from my GNex. When I try to view my Gnex file system, I get a an error message saying the Nexus does not support OBEX FTP, which it should. Not a big deal but it is a nuisance.
RobBull69 said:
I haven't had problems with Bluetooth audio. When I use Bluetooth File Transfer between my Xoom and Gnex, I can view my Xoom's file system from my GNex. When I try to view my Gnex file system, I get a an error message saying the Nexus does not support OBEX FTP, which it should. Not a big deal but it is a nuisance.
Click to expand...
Click to collapse
I am gonna test this !
i notice Bluetooth issues when connected to my motorcycle helmet.
using stock or other custom roms it will start to cut out or skip when i put the phone in my pocket and at highway speed it loses connection completely.
when using cm10 "official not the kangs" it has no issue whatsoever and the connection distance is improved 20x. i can have the phone 20 meters away and it still stays connected and even at highway speeds.
Sent from my Galaxy Nexus
sorry my question , but what is cm10 ?
salatiel said:
sorry my question , but what is cm10 ?
Click to expand...
Click to collapse
CM10 = Cyanogenmod Version 10. It is the first Jelly Bean Rom from Cyanogenmod. There are many threads on the topic but you can also find information on their site.
The official nightly releases of this version has just been released for the VZW and Sprint Galaxy Nexus as well as other devices.
mmouse03 said:
CM10 = Cyanogenmod Version 10. It is the first Jelly Bean Rom from Cyanogenmod. There are many threads on the topic but you can also find information on their site.
The official nightly releases of this version has just been released for the VZW and Sprint Galaxy Nexus as well as other devices.
Click to expand...
Click to collapse
i will check if there is a maguro version available to see if thet fixed the bluetooth problems...

[Q] PS Vita won't communicate with any Jelly Bean-based ROM's wifi AP

So this is a bizarre situation that I hope someone might have some insight on but to be honest, I'm not expecting much
For some reason my PS Vita will connect to my phone's wifi hotspot just fine in ICS-based ROMs like CM10, however it will connect, get an IP address, and appear to communicate but time out when trying to connect to the playstation network or anything at all when using either stock Jelly Bean or any of the various edits I've tried.
I've tried about everything I can on the Vita end but there isn't a whole lot I can do there other than clear settings, try static DNS, things like that. The only thing that seems to work is using old ICS-based ROMs.
Has anyone experienced anything like this, or have any ides for deeper diagnostics I can do?
Cm10 just happens to be jellybean so did it work for cm9 or cm10 or was it working with 4.0.x and not with 4.1.x or is it just 4.2.x its not working with?
Sent from my Galaxy Nexus using xda premium
Beamer9408 said:
Cm10 just happens to be jellybean so did it work for cm9 or cm10 or was it working with 4.0.x and not with 4.1.x or is it just 4.2.x its not working with?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
4.2 specifically, then. I forgot that both of those are Jelly Bean!
Bump in case someone else might see this and have any ideas =\
This is now one of the top results when I search for this problem
Is there anything I can do so I have enough data for a proper bug report? A netcat tool or something? How would I go about investigating this issue?
Boten Anna said:
This is now one of the top results when I search for this problem
Is there anything I can do so I have enough data for a proper bug report? A netcat tool or something? How would I go about investigating this issue?
Click to expand...
Click to collapse
Any luck with this?
I'm on Verizon and just got pushed JDQ39. It was totally working in the previous version (which I think was 4.1.1 but I don't know). Now, like you, the Vita connects, gets an IP address, but can't connect to anything.
langdonx said:
Any luck with this?
I'm on Verizon and just got pushed JDQ39. It was totally working in the previous version (which I think was 4.1.1 but I don't know). Now, like you, the Vita connects, gets an IP address, but can't connect to anything.
Click to expand...
Click to collapse
Same problem.someone please help
You'll have to wait for 4.3 and hope google fixed it (pretty sure they will)
sent from my Galaxy Nexus w/ Beats Audio™ by Dr. Dre
Alton (Halo 2) said:
You'll have to wait for 4.3 and hope google fixed it (pretty sure they will)
Click to expand...
Click to collapse
Is there some way to report it as a bug or track the bug if it already exists? Do they use code.google.com like Chromium does?
langdonx said:
Is there some way to report it as a bug or track the bug if it already exists? Do they use code.google.com like Chromium does?
Click to expand...
Click to collapse
I'm on a galaxy nexus, google results brought me here because my phone's hotspot works for all other devices, but not on my vita. I'm on 4.3
Someone tell me if 4.4 will work or what I can change, downgrade to, or possibly replace as a tethering app. I've tried all the non-root ones such as foxfi with the same results.
Update, it works with liquidsmooth ics rom 4.0.4

[Q] Fitbit Flex, BT4 & Custom Roms

Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
lensgrabber said:
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
Click to expand...
Click to collapse
This is all exactly the same on my Note 2, but even my stock doesn't rom work. Like I said, possibly due to the old version 4.1.1. Under the stock rom the app shows all the additional options like you mention, but my phone's bluetooth never sees the Flex. I wonder what the Fitbit app uses to determine whether to show the additional options or not. I included screenshots to my "about device". I noticed that my model number was different with the new rom and thought maybe that might have something to do with it because clearly it's not (or not just) the android version.
Have you tried a stock 4.1.2 build ??
UCAMA4
It's a good option..and worth a try....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
chellexor said:
Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
Click to expand...
Click to collapse
lensgrabber said:
If I recall, on a S3 and using a Fitbit One, you won't see the Fitbit except inside the app. There is a "devices" section in the app which lets you check the sync box. If you don't see that then the phone isn't seeing the Fitbit. Stock rom on the S3 works fine. Any custom rom will show you stats pulled from the web but not allow you to sync from the phone. I believe their app is the problem and not necessarily the phone or rom. Anyway, I've learned to live without syncing from the phone since stock firmware just isn't for me.
Click to expand...
Click to collapse
chellexor said:
This is all exactly the same on my Note 2, but even my stock doesn't rom work. Like I said, possibly due to the old version 4.1.1. Under the stock rom the app shows all the additional options like you mention, but my phone's bluetooth never sees the Flex. I wonder what the Fitbit app uses to determine whether to show the additional options or not. I included screenshots to my "about device". I noticed that my model number was different with the new rom and thought maybe that might have something to do with it because clearly it's not (or not just) the android version.
Click to expand...
Click to collapse
gregsarg said:
Have you tried a stock 4.1.2 build ??
UCAMA4
It's a good option..and worth a try....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
Click to expand...
Click to collapse
Can someone link a stock rom for me? I have the GPe of the GS4. i9505G, and I have AT&T. Started out with SGH-i337
Fitbit Sync
I got FitBit to Sync finally with my custom rom.
I used the Build Prop Editor from JRummy. play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
change the ro.product.model=GT-I9505G
and ro.product.manufacturer=samsung
and save those settings, reboot, and now Fitbit will try to sync now. YAY! :victory:
chellexor said:
Hi,
I've been running jelly bam lately because of the PA features (specifically per app DPI), but I recently purchased a Fitbit Flex and couldn't get it to work. I contacted their support and they just told me they don't support custom roms.. so I tried to restore my stock ATT/Samsung rom which is just version 4.1.1. The Fitbit Flex software installs and actually has the refresh button now but my phone doesn't seem to see my Flex when bluetooth is on. I think I need an update before I will be able to use the stock rom and I'm not sure how to do the updates with TWRP installed, I tried but it keeps rebooting into recovery. Anyway, I'd prefer not using the stock rom, specifically I would prefer a custom rom with PA features. I've just tried PAC-Man 4.3 nightly from last night (pac_t0lte-nightly-20130823.zip), and while my phone's bluetooth does see the device now, the Fitbit app doesn't give me the options like it did with my stock rom. Has anyone gotten the bluetooth and their Fitbit Flex to work with a custom rom with PA features?
Thanks!
Click to expand...
Click to collapse
cklaus1 said:
I got FitBit to Sync finally with my custom rom.
I used the Build Prop Editor from JRummy. play.google.com/store/apps/details?id=com.jrummy.apps.build.prop.editor
change the ro.product.model=GT-I9505G
and ro.product.manufacturer=samsung
and save those settings, reboot, and now Fitbit will try to sync now. YAY! :victory:
Click to expand...
Click to collapse
I followed those tips and got it working on my Galaxy S3 AT&T running Carbon ROM...
but now the Dilbert app is telling me that my device is not supported... which is weird because it's just an app to view the daily comic strip.
zadigre said:
I followed those tips and got it working on my Galaxy S3 AT&T running Carbon ROM...
but now the Dilbert app is telling me that my device is not supported... which is weird because it's just an app to view the daily comic strip.
Click to expand...
Click to collapse
Just one thing to try, my FitBit wouldn't initially synchronise with any of my devices (all custom ROM)...but I then tried removing the gel cover and plastic rear battery cover of the phone (an S3), held it very close to the FitBit and it then sync'ed fine!
It seems that this new low-power Bluetooth protocol is a little too low on the power element
Note 2 & Fitbit/Bluetooth Problems
I came here looking for answers/help with my bluetooth... but so far I haven't really been able to find anything that's actually helpful. I can share with everything what I've been able to find out, though.
I have a Galaxy Note 2 running stock on Android 4.4.2 and I have the Fitbit Flex. I used to sync without any problems but after my phone updated to 4.4.2 it no longer syncs. After researching for a few days... it seems the problem is with the Update itself... it reduces power or range of Bluetooth... that's why the Flex cannot sync to it. However, I have discovered an quick fix to that:
When syncing, just place your phone on top of your Flex band and it will sync up without any problems. This has become my temporary solution. Someone else suggest another quick fix would be to turn on Mobile Hotspot on your phone... that is suppose to increase the Bluetooth Power.
I also learned that Samsung won't update the Note 2 to 4.4.4, which would have fixed this problem.. but instead will Update the Note 2 to Lollipop... but that date is still unannounced.
If anyone has any ideas on how to really fix this problem... I'm all ears. The only solution I found was to open up the phone and do something to the bluetooth chip inside... but I forgot where I found that solution.

Categories

Resources