Related
[Script][MOD][U9RC6][ICS]I SCream! -=V6 SUPERCHARGER=- The ONLY RAM Fixer + KAK & 3G!
This is an awesome memory script by zeppelinrox.
I have used it on a few of my phones in the past and it does exactly what he describes it as!
This is the original thread with links to the scripts.
Recommended is setting 9, with the 1000HP. HP has to do with total memory I believe.
Editing this for some more clarity:
The most recent updates (betas/tests) are located here.
Software needed before installation:
1)Script Manager (found in the Market)
2)Busybox Installer (found in the Market) Make sure you install Busybox 1.182 or lower!
3)Your phone MUST be rooted!
To install:
1)Make sure you have the above software installed.
2)Download whatever version of V6 Supercharger/3G Turbo that you want to install. I usually install the most recent beta releases. You can find the stable release from here Betas/tests are here.
3)Open Script Manager
4)Navigate to where you downloaded the script and select it
5)Check Run as Root
6)Touch Run
7)Follow the instructions as the script runs!
Highly recommended for everyone's phone!! It really turns your phone into something brand new!
Good find I'll have to give this a go.
Sent from my SGH-T989 using xda premium
I read the thread and it sounds like a great idea and i'd like to give it a go, but i dont really understand how to install it or how to use it once its installed... can someone help me out here?
I been using it for a few days. You place the script on the root of the sd card. Use scrpit manager to run the script
Sent from my SGH-T989 using xda premium
Very interesting find, might give it a go tomorrow!
Sent from my SGH-T989 using xda premium
Awesome stuff! Followed the op and instruction looks and went smooth...butter 7
MERCaBeast
I have been using this on and off for several months with my vibrant and it is the best enhancement I have ever used but I have NEVER gotten the values to stay after I reboot even with the 3 g and kernel tuning at boot
Sent from my SGH-T989 using xda premium
noah1017 said:
I have been using this on and off for several months with my vibrant and it is the best enhancement I have ever used but I have NEVER gotten the values to stay after I reboot even with the 3 g and kernel tuning at boot
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
stick to the vibe or S2?
MERCaBeast
Been using this forever, it's pretty sweet.
Sent from my SGH-T989
You better check to see what version of busybox you are using or you are asking for a world of errors. I believe we are on version 1.19 and you need to be on 1.18.2 or lower. And you have to remember that a universal tweak or mod doesnt always work with our phones because samsung did something way different this time. So im just saying be careful!!!!!!
mongo41 said:
You better check to see what version of busybox you are using or you are asking for a world of errors. I believe we are on version 1.19 and you need to be on 1.18.2 or lower. And you have to remember that a universal tweak or mod doesnt always work with our phones because samsung did something way different this time. So im just saying be careful!!!!!!
Click to expand...
Click to collapse
yeah...I couldn't get it to run right with 1.19, but the phone is silky smooth running EB anyways...
lightningtrip said:
yeah...I couldn't get it to run right with 1.19, but the phone is silky smooth running EB anyways...
Click to expand...
Click to collapse
You can use busybox installer to downgrade to 1.18. I did and my cf-bench scores went up quite a bit. (With this and the Universal Adrenaline Shot.)
Phone seems more responsive and faster to switch apps now.
tanisloray said:
This is an awesome memory script by zeppelinrox.
I have used it on a few of my phones in the past and it does exactly what he describes it as!
This is the original thread with links to the scripts.
Recommended is setting 9, with the 1000HP. HP has to do with total memory I believe.
Highly recommended for everyone's phone!! It really turns your phone into something brand new!
Click to expand...
Click to collapse
I think I got this installed... but where is this 1000HP setting? Can't seem to find it. I chose option 9 but it never asked me for any values.
Holy crap this is amazing downgraded my busybox to 1.18.2 and ran the script. I chose 0 for the launcher setting and 9 for the v6 setting im running this and dsextons tweak on the stock rom streamlined underclocked to 1.3ghz absolutely amazing with crazy battery life
Sent from my SGH-T989 using xda premium
Once again i believe this needs init.d support from the kernel. So maybe nothing atm.
Sent from my HercuBEAST!!!
kennyp987 said:
Holy crap this is amazing downgraded my busybox to 1.18.2 and ran the script. I chose 0 for the launcher setting and 9 for the v6 setting im running this and dsextons tweak on the stock rom streamlined underclocked to 1.3ghz absolutely amazing with crazy battery life
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
How crazy?
mettleh3d said:
How crazy?
Click to expand...
Click to collapse
I get about 10 hrs of heavy usage 15 medium usage
Sent from my SGH-T989 using xda premium
Babyj303 said:
Once again i believe this needs init.d support from the kernel. So maybe nothing atm.
Sent from my HercuBEAST!!!
Click to expand...
Click to collapse
I got the settings to stick by setting the script file to run on boot in Script Manager as per the install instructions on the other thread. Pretty amazing stuff.
Enzopreme said:
I read the thread and it sounds like a great idea and i'd like to give it a go, but i dont really understand how to install it or how to use it once its installed... can someone help me out here?
Click to expand...
Click to collapse
Download "Script Manager" in the market. The rest is following directions.
Locksmith81 said:
stick to the vibe or S2?
MERCaBeast
Click to expand...
Click to collapse
s2 without a doubt
Sent from my SGH-T989 using xda premium
hey,
well title says it all, i got directed to come to xda for help. ive had smartphones but never have done or seen a phone rooted. i just picked up the gs2 coming from sensation and my hotspot is now locked down to having to pay 15 a month. was told by rooting you pickup free hotspot and sometimes paid apps. can someone provide me with download links and instructions step by step so i dont mess up my phone. thanks in advance.
ps its the t989 gs2
also i wwant to delete all these garbage bloatware apps always running to
Check the stickies in the general section. i think there's a thread in the development section too.
Sent from my SGH-T989 using xda premium
Just a heads up. Its against the forum rules to ask for paid apps for free. Not trying to be a jerk or anything.
I found that the method mentioned in the stickies in the Dev section pretty clear and straightforward, its noob friendly unlike the MTG4G which are a great mess. Once rooted, install titanium backup and freeze/delete the tethering manager app and you should be able to tether for free. You can get free apps while being on stock........
The link for free apps is in there somewhere, find it
I thought he meant he can now use paid apps that require root... Ahem right?
Sent from my SGH-T989 using xda premium
I'm not asking for free paid apps..was just mentioning the perks some one told me about rooting...I basically want the hot spot
Sent from my SGH-T989 using XDA App
there's several apps I've tried using but require root, I want to be able use those
Sent from my SGH-T989 using XDA App
ok so i figured out the root...just used the volume key long press and installed supreruser and odin 1.85 and titanium pro. now that i,m here how do i installl roms? this being my first time at this was wrecking my brain getting to this point any tips an advice on which roms would be appreciated. ty
Go to the dev section. Download a rom. Flash it in recovery.
Sent from my HTC Vision using XDA Premium App
any opinions on juggernaut or recommend a good one to start out on?
way easier than I thought now running juggernaut
Sent from my SGH-T989 using XDA App
bobby3306 said:
any opinions on juggernaut or recommend a good one to start out on?
Click to expand...
Click to collapse
Juggernaut 4.1 with the ICS Ultimate theme found in the themes section with Eugene's new kernel using the SmartassV2 governor....very nice so far
Sent from my SGH-T989 using Tapatalk
iLeopard said:
Juggernaut 4.1 with the ICS Ultimate theme found in the themes section with Eugene's new kernel using the SmartassV2 governor....very nice so far
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
Where's Eugene's kernel
Sent from my SGH-T989
Branso07 said:
Where's Eugene's kernel
Sent from my SGH-T989
Click to expand...
Click to collapse
Here it is
To flash the kernel:
-Boot into recovery
-Wipe Cache
-Advanced -> Wipe Dalvik Cache
-Install zip from SD Card
-Reboot and let it sit for a few minutes for the OS to load up completely (about 5 minutes should suffice)
-Reboot once more and install SetCPU which can be found in the Market for $1.99 or free here
Once installed open it up and AutoDetect Speeds and then select form the drop down menu SmartassV2 and you should be set
Did you find the ICS theme?
im sorry im new to this... did first root and flash yesterday...i did odiin then flashed the file on juggernaut in dev section.... to i need to do this kernel to? or is it just like a add on to go with it? also whats a good overclock setting?
A kernel is pretty much the main computing core of an operating system. If you're using the one that came with Jug's rom, you will experience some lag and random reboots. Eugenes kernel gives you better performance and battery life (if you wanna think about it that way). Just flash it, you wont regret it.
It's not hard at all either, pretty much the same process as flashing a ROM but instead you flash another zip file.
do i only need to wipe those cache? and not a full wipe as when i flashed the rom?
bobby3306 said:
do i only need to wipe those cache? and not a full wipe as when i flashed the rom?
Click to expand...
Click to collapse
Correct. Wipe cache and dalvik cache, reboot then wait like 5-10 mins then reboot again
If the only thing you wabt to do is tether, then (only if u jave a 5gig or more plan) you can call tmo and they have a promotion going on right now that will give u tethering for free. Just give them a call, in the auto system say plans, then hit 0 and tell the rep about the promotion.
Sent from my SGH-T989 using Tapatalk
kkg720 said:
If the only thing you wabt to do is tether, then (only if u jave a 5gig or more plan) you can call tmo and they have a promotion going on right now that will give u tethering for free. Just give them a call, in the auto system say plans, then hit 0 and tell the rep about the promotion.
Sent from my SGH-T989 using Tapatalk
Click to expand...
Click to collapse
When he can just switch the APN?
Hey guys I just rooted my s3 and flashed my first ROM. I was just wondering what ROMs you're using (currently running CM10) and what's some nice apps to get for a rooted device? Thanks!
Sent from my SPH-L710 using xda app-developers app
I'm on 12/26 nightly of CM10. Titanium backup and a ad blocker app.
Sent from my SPH-L710 using Tapatalk 2
MaySun91 said:
Hey guys I just rooted my s3 and flashed my first ROM. I was just wondering what ROMs you're using (currently running CM10) and what's some nice apps to get for a rooted device? Thanks!
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I would say Titanium Backup, Wifi tether for root users, and Rom toolbox are must have apps.
The toolbox and TB are both really awesome and packed to bursting with features
Oh and +1 to the guy above me on the ad blocker app, it really helps.
Oh and some sort of file browser, root browser has a nice GUI but tends to crash a lot, Root explorer is a little more reliable
Thanks for the replies guys! So glad I decided to root my device and hope to really get into all the ins and outs of rooting!
Sent from my SPH-L710 using xda app-developers app
What i got on board my s3
What I am running is Frankenstein kill joy7 2.1 with the standard AGAT kernel .3.2 which comes with the ROM. It launches on APEX which for me is no big deal. Also Frankenstein also comes with almost no bloat ware.I have been through a few roms and found this one really nice. I have used CM10 and it was ok for me but liked the single core when the screen was off. Titanium is always excellent and even Pimp my ROM or ROM Customizer app. and Goo manager if you are ever plan on switching your ROM. If you are new at swapping ROMs biggest advice anyone could have told me is to do ALOT ALOT ALOT of research prior to switching to a new ROM nothing is more frustrating the a boot loop, soft brick or worse a BRICK. hope it helps and welcome to the custom ROM it gets better from here on out
Oh yes yes, usually some sort of build rpop editor andthe following recovery and managing apps (either one)
ClockworkMod Recovery (CWM) + Rom Manager
TWRP and Goo manager
I would also HIGHLY recommend doing a lot of research (like the guy above me said) and you seem inclined so it shouldnt be a problem, a good start would be going to xda-university.com and reading through the entire "Users" section, it very thorough and easy to understand
Cm10.1 or blazer
Sent from my SPH-L710 using xda premium
razzack3000 said:
Cm10.1 or blazer
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
I heard blazer is packed with tweaks and customizable mods
http://phandroid.com/2013/06/06/galaxy-s4-storage-update/
that is a load of crap. This has been something peolpe have complained about since profiles were introduced. Hopefully it's well, because some of it would be pain trying to do with DirectoryBind or FolderMount. That's why some run scripts to switch the SD card for the internal memory.
MeetFace said:
http://phandroid.com/2013/06/06/galaxy-s4-storage-update/
Click to expand...
Click to collapse
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
XxLostSoulxX said:
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Yes, I'm fully aware, but built in, no script manager required is much better.
MeetFace said:
Yes, I'm fully aware, but built in, no script manager required is much better.
Click to expand...
Click to collapse
You don't think that they're doing the same thing they're doing the exact same thing however its all scripted within the ROM itself. Because developers don't know that exact code so to speak that's why not implemented the the reason why we have to use an application that allows the script to run.
Sent from my SPH-L900 using xda app-developers app
XxLostSoulxX said:
You don't think that they're doing the same thing they're doing the exact same thing however its all scripted within the ROM itself. Because developers don't know that exact code so to speak that's why not implemented the the reason why we have to use an application that allows the script to run.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
MeetFace said:
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
Click to expand...
Click to collapse
This is so me. I can't wait for that update to come any sooner so I can move all my gameloft games. My note have never been rooted since released date. Just tired of playing with multiple rom at a time (back in my flashaholics days). Although development is great for this phone, thanks to awesome devs.
MeetFace said:
Haha...no need to get picky, or pick a fight. Built in is built in. I could care less how they do it.
I'm pretty much over my flash-happy days of manually applying tweak after tweak after every flash of a new ROM or kernel.
That's not to say I don't still apply things manually, I just try to minimize that as much as possible.
Click to expand...
Click to collapse
I wasnt fighting lol. I was just saying
Sent from my SPH-L900 using xda app-developers app
No! Fight! =D
sent from my ginormous Note II
only if it to hot cats fighting.
XxLostSoulxX said:
Apps2sd.bin is available to use for our phone one of which runs great with script manager
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Yeah but doesn't this need a custom rom to be fully integrated?
I run the apps2sd script(From http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/) and use script manager to run it. I am on stock rooted. The problem I have is that every time I restart my phone, I have to manually run the script from script manager, it does not automatically run. And yes I have root and boot checked, and I've granted root permissions to busybox and script manager.
I just use FolderMount. Works well with games and other stuff.
PsycloneTW said:
Yeah but doesn't this need a custom rom to be fully integrated?
I run the apps2sd script(From http://galaxynote2root.com/galaxy-n...sd-card-with-rooted-galaxy-note-2-app2sd-mod/) and use script manager to run it. I am on stock rooted. The problem I have is that every time I restart my phone, I have to manually run the script from script manager, it does not automatically run. And yes I have root and boot checked, and I've granted root permissions to busybox and script manager.
Click to expand...
Click to collapse
Go to this page http://forum.xda-developers.com/showthread.php?t=1772234 and dl ext2intsd.zip. you must be on a tw rom and use either stock or perseus kernel (stock kernel must have init.d support) this .zip will make it permanent even after restarting your phone.
Sent from my SPH-L900 using xda premium
I'm posting this here because the PA4.3 thread has been closed and I don't want to clutter the 4.4 thread asking about an old rom.
I've been lurking for awhile. I have experience with rooting/flashing plenty on the Evo4g (including some AOSP). On my Note 2, I've stuck to TW roms on my Note 2. Im looking to hop into the AOSP world and I think this is the ROM I want to try (the kitkat version doesn't have features/stability from what I've read). However, I have a couple questions.
1) Of course I will nandroid my TW rom. If I decide I want to go back, is it as simple as restoring my backup? Or are there additional steps going from AOSP back to TW nandroid?
2) I see various versions/builds & kernels listed in this thread? Can someone please suggest a reliably stable build/kernel for me to start out with that has everything working?
Sent from my SPH-L900 using xda app-developers app
Hey, I've been running paranoid 3.99 for a while and it has great battery life, even on stock rom, you can use plasma kernel with it or Devil kernel, your choice, flash the latest stable and you should be fine, also look for the SD card restore zip if you ever go back to TW you are going to need it, its buried in to the cm 10 thread just look for it, also make sure you get stweaks from play store and if you have issues send me a pm and I will be glad to help you, good luck!
Sent from my SPH-L900 using Tapatalk 4
jocarog said:
Hey, I've been running paranoid 3.99 for a while and it has great battery life, even on stock rom, you can use plasma kernel with it or Devil kernel, your choice, flash the latest stable and you should be fine, also look for the SD card restore zip if you ever go back to TW you are going to need it, its buried in to the cm 10 thread just look for it, also make sure you get stweaks from play store and if you have issues send me a pm and I will be glad to help you, good luck!
Sent from my SPH-L900 using Tapatalk 4
Click to expand...
Click to collapse
Thanks for the response!
Do I NEED an external sd for AOSP? And if I use a nandroid to restore, would I still need the SD card restore zip?
Sent from my SPH-L900 using xda app-developers app
Also - I found the link on page 7 of the CM10.1 thread, but the dropbox file is no longer available. Do I need to dig further?
Sent from my SPH-L900 using xda app-developers app
Smidgers said:
Also - I found the link on page 7 of the CM10.1 thread, but the dropbox file is no longer available. Do I need to dig further?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Let me know what file you need and I'll upload it to my dropbox, you don't need a SD card, just get the room zip in the root of your internal SD, wipe or do a factory reset in twrp/cwm flash the zip and gapps... Reboot... Do the initial setup and restore your apps or start from scratch if you prefer... Good luck!
Sent from my SPH-L900 using Tapatalk 4
I would need whatever zips are needed to go from AOSP to TW. And also a quick step by step on what order to flash to go back. I appreciate your help!
Sent from my SPH-L900 using xda app-developers app
Smidgers said:
I would need whatever zips are needed to go from AOSP to TW. And also a quick step by step on what order to flash to go back. I appreciate your help!
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
1. Make a backup of your current setup in twrp
2. WIPE data, system, cache and dalvik (factory reset)
3. Flash aosp rom and gapps package
4. SET IT UP...
TO RESTORE:
1. Backup your aosp setup...
2. Do the recommended wipes
3. restore your nandroid TW backup...
4. Flash this zip: https://www.dropbox.com/s/9ee1s03ev246rpx/restore-sdcard-after-downgrade.zip
5. FIX PERMISSIONS
6. Reboot and enjoy...
To restore back to aosp do the recommended wipes and fix permissions once the restore is done... Good luck!
Sent from my SPH-L900 using Tapatalk 4
Thanks!
Sent from my SPH-L900 using xda app-developers app
Finally took the plunge. Loving PA4.3.
Only question I have so far - is there a way to get the Sprint VVM for this?
Sent from my SPH-L900 using xda app-developers app
Smidgers said:
Finally took the plunge. Loving PA4.3.
Only question I have so far - is there a way to get the Sprint VVM for this?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
You should be able to find the apk, I don't use it personally, I prefer the Google Voice integration, just for voicemail...
Edit: try this version
http://forum.xda-developers.com/showthread.php?t=1756589
Sent from my SPH-L900 using Tapatalk 4
I've been messing around with GV. Is there a way to disable the email & text notifications?
3 notifications is a bit much for my taste lol
Sent from my SPH-L900 using xda app-developers app
You can disable it in the website...
Thanks. I'll have to check that out in the morning
Sent from my SPH-L900 using xda app-developers app
Another issue that I've run into that could be a deal breaker. I use Good For Enterprise for my work email. It seems to have installed fine. But I'm not receiving any of my notifications for that. Do you know of any similar issues?
Sent from my SPH-L900 using xda app-developers app
Disregard. Appears to be working now.
Also disabled the extra gv notifications too.
2 more questions though -
1 -when opening a window through notifications, is there a quick way to switch to full screen?
Can the pie menu be edited? I used it on two as a quick launch for frequent apps.
Thanks for your help
Sent from my SPH-L900 using xda app-developers app
Figured out the pie thing (or at least a suitable workaround).
Still trying to figure out an easy way to go from Floating Window to Full easily.
Sent from my SPH-L900 using xda app-developers app