When I recently flashed the camera.zip file for the Sense 5 lookalike ROM, I tried to reboot in recovery as usual but now it keeps going to bootloader mode. Already wiped data/factory reset, doesn't work. Help please?
EDIT: It's fastboot mode, not bootloader.
EDIT 2: Flashing the ROM again worked. But I would like to know why this problem occurs. Because I flashed the same zip again and this time it worked.
SunnyChrono6 said:
When I recently flashed the camera.zip file for the Sense 5 lookalike ROM, I tried to reboot in recovery as usual but now it keeps going to bootloader mode. Already wiped data/factory reset, doesn't work. Help please?
EDIT: It's fastboot mode, not bootloader.
Click to expand...
Click to collapse
hey i had this problem too
do this:
download a new rom on the pc,
go mounts and storage and mount usb storage or however its named,
connect the phone to the pc and put the rom on sd,
so if you done this, unmount usb storage and do a clear wipe:
wipe data factory reset, wipe dalvic cache, format everything exept sd, wipe battery states and the other one in advanced...
then install the new rom, and wait..
after this go to advanced and fix permission..
then reboot
wait until it finnished.. it takes a long time
so i hope i helped you
Sent from my Wildfire s using NikSalsa's amazing JellyFish
SunnyChrono6 said:
When I recently flashed the camera.zip file for the Sense 5 lookalike ROM, I tried to reboot in recovery as usual but now it keeps going to bootloader mode. Already wiped data/factory reset, doesn't work. Help please?
EDIT: It's fastboot mode, not bootloader.
Click to expand...
Click to collapse
LOL I forgot about this thread. All I had to do was reinstall the ROM
Related
So I decided to root my phone and upgrade to JB. But after I unlocked the bootloader, rooted the phone, flashed CWM Recovery and downloaded "Vicious JellyBean V2- No SU Zip necessary- Francos kernel and WiFi fix Zip" then went in to fastboot mode and installed it, my phone is hanging up on the new multicolored x splash screen and will not load. I waited 30 mins, I bricked it. So I went back into fastboot mode and reinstalled the JB, but still same thing.
So I am without a phone because I dont know what to do. :crying:
Any help is greatly appreciated!!!!! TIA
what do you mean by fastboot mode. You should have been flashing it through clockwork. Did you wipe your data, cache and Dalvik cache before hand? Or make a nandroid backup before installing Liquid?
If not sounds as if you are going to need the toolkit or push the stock files via adb to flash back to stock then start again
Get this set up.
I don't feel like debugging for two hours via text and reply.
I'll recover as much as I can.
Edit:
http://www.teamviewer.com/en/index.aspx?utm_expid=60202728-6
Lol, meant to paste that link.
Once that's installed I'll remote connect to your PC and try to fix this.
NeoMagus said:
what do you mean by fastboot mode. You should have been flashing it through clockwork. Did you wipe your data, cache and Dalvik cache before hand? Or make a nandroid backup before installing Liquid?
If not sounds as if you are going to need the toolkit or push the stock files via adb to flash back to stock then start again
Click to expand...
Click to collapse
I wiped with toolkit didnt cache or Dalvik cache. I have a replacement device coming today and want to try again. Is there a link to somewhere with step by step directions. I would assume the replacement device has factory settings so do I have to wipe, etc?
skinnytoo2 said:
I wiped with toolkit didnt cache or Dalvik cache. I have a replacement device coming today and want to try again. Is there a link to somewhere with step by step directions. I would assume the replacement device has factory settings so do I have to wipe, etc?
Click to expand...
Click to collapse
Manual Method
Toolkit Method
Just download a JB rom from the Development forum after you've unlocked bootloader, flashed a custom recovery, and have rooted your phone. Most are bug and glitch free...
I reflashed JB and it worked!!! Thanks guys!! Love JB
skinnytoo2 said:
I reflashed JB and it worked!!! Thanks guys!! Love JB
Click to expand...
Click to collapse
grats. next time, please dont incorrectly use the term 'brick'
brick = unable to turn on. no bootloader mode [fastboot], no recovery, no download.
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Runge2970 said:
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Click to expand...
Click to collapse
flash twrp recovery via fastboot
simms22 said:
flash twrp recovery via fastboot
Click to expand...
Click to collapse
okay, just did. Tried the wipe and cleat options on that, but whit same results...
Runge2970 said:
okay, just did. Tried the wipe and cleat options on that, but whit same results...
Click to expand...
Click to collapse
are you wiping data(factory reset) or are you just wiping your dalvik and cache?
Runge2970 said:
Hi you guys. Im have a bit of trouble whit the CWM. Im stuck in a kind of bootloop after updating to latest CM10. It boots up and i can access my homscreen for like 6-7 sec, but then it reboots to bootscreen.
So i thought i have to wipe my data, get it back to factory state. So i do that, wipes cache to. I have even tried the Mount and storage > format /system /cache and /data.
But when i re-install my rom allmy apps, wallpaper and that, are all where i put them. I can even mange to open some of the apps whitin the 6-7 sec window i have before the phone will reboot. The CWM says it done all things right. No error messages at any time ...
Any one whit an idea to get this back on track ?
Click to expand...
Click to collapse
OK do what simms22 has explained. That should work.
But from what I am interpreting is that you are doing cache not wipe. So you go to "wipe data/factory reset" menu and hit/press yes. It should wipe it and done. BTW it might have been in a boot loop because you might of dirty flashed or you didn't wipe cache and dalvik cache. That is very important to remember. Never dirty flash and also wipe cache and dalvik cache.
Also did you play with tweaks and such before this was happening. Like voltage or over clock because that could be the problem too.
Dalvik cache and cache are hash signed by the last rom that was flashed. New rom, new hash sign. No need to wipe caches, just data.
Sent from my i9250
Cwm is notorious for failed wipes.
Definitely upgrade to twrp, and if your phone is so messed up twrp can't wipe it, use the android revolution wipe script.
Sent from my Galaxy Nexus using xda premium
If you're backed up and don't mind losing EVERYTHING, yes, EVERYTHING in /data, then boot into fastboot mode and run
Code:
fastboot erase userdata
from your computer. (Might need root privileges if running on Linux)
Hi guys. I got it to work finally. I didt some tweaking whit the DPI. Maybe that was the cause of the crash ??
But i went to use the Galaxy Nexus toolkit, first of all to flash the other recovery program. But since it dint work either i flashed it whit sock rom, from the same toolkit at started all over. That did work, but hell of a way to go
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i really dont know what to do.
download a rom/gapps and use adb to transfer them to your sdcard.. adb command "adb push file.zip /sdcard/file.zip"..
PS- in twrp wiping data wipes EVERYTHING so when you want to wipe before flashing a rom do a factory reset and DONT wipe data
Khizar said:
download a rom/gapps and use adb to transfer them to your sdcard.. adb command "adb push file.zip /sdcard/file.zip"..
PS- in twrp wiping data wipes EVERYTHING so when you want to wipe before flashing a rom do a factory reset and DONT wipe data
Click to expand...
Click to collapse
Thanks for your help, i found a similar problem on another site im halfway through it now, so when i flash roms in twrp i want to do a factory reset? wipe the cache and dalvik cache?
quirkles said:
Thanks for your help, i found a similar problem on another site im halfway through it now, so when i flash roms in twrp i want to do a factory reset? wipe the cache and dalvik cache?
Click to expand...
Click to collapse
this is how i flash roms..
1. factory reset
2. wipe system
3. wipe cahce
4. wipe dalvik
5. flash rom
6. flash gapps
7. flash AK kernel
8. reboot
9. wait 10 mins then do another reboot then enjoy :good:
quirkles said:
I was advised that i needed to update my recovery to twrp from cwm recovery to avoid an issue i got while flashing roms (the contents of my sd card would get pushed down into a subfolder of a newly created set of folders) however when i wiped my phone, as i always used to do with CWM twrp seems to have wiped a lot more, its wiped the existing rom, and all the files on my card, so i cant install a new rom. Basically i only have access to twrp recovery mode, how can i get the rom .zips onto my phone to install them? Id really appreciate any help at all, i had no issues flashing with CWM and i really dont know what to do.
Click to expand...
Click to collapse
You actually only had to update CWM to the latest version to fix that problem
EddyOS said:
You actually only had to update CWM to the latest version to fix that problem
Click to expand...
Click to collapse
eh, what's done is done, if it gives me any trouble ill switch back
i recently tried to flash a rom but it failed so i thought no big deal right ?
well when i tried to reboot my phone its just stays on the samsung galaxy screen.
all did a factory data reset
i unfortunally forgot to do a back up
i have twrp recovery
what should i do ?
re: rom flashing
Alex0014 said:
i recently tried to flash a rom but it failed so i thought no big deal right ?
well when i tried to reboot my phone its just stays on the samsung galaxy screen.
all did a factory data reset
i unfortunally forgot to do a back up
i have twrp recovery
what should i do ?
Click to expand...
Click to collapse
I hope you have a external sdcard in your phone..
The first thing to do is to download this Wicked v3 custom rom which is the best rom you can find.
Here is the download link: http://sourceforge.net/projects/evil1art/files/evil/S4/WICKED_v3.zip/download
After it's downloaded take your external sdcard and plug it into some adaptor and plug that into your computer.
Then copy the wicked rom onto the microsdcard and put the card back into your phone.
After doing that boot the phone into cwm or twrp recovery whichever you have and flash the rom.
Be sure that before you flash the rom do a full wipe including factory reset, wipe cache, wipe dalvik cache
and wipe system before you start the flash.
After it's done flashing and it gets to the screen where it asks you about what language you want,
don't do anything for about 4-5 minutes. Then reboot the phone and put all your info into it like
usual when flashing any other rom.
That's about it, you will have the best rom and the best phone.
Good luck!
So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
anoopknayak said:
So I wanted to go to Lollipop and I happened to flash the twrp recovery for new layout(as i was getting boot loop when flashing the rom with cwm recovery)
The things i tried until now.
1. Installed twrp and formatted it to get the new layout. Wiped everything, system, cache, data, dalvik cache
2. It was supporting MTP so i transferred the roms to the device being in recovery. Installed CM 12 + gapps for lollipop.
3. Rebooted to bootloader again. flashed boot.img, and did fastboot erase cache.
4. Rebooted again and stuck at CM boot logo.
I wiped the cache, dalvik cache(actually did a factory reset in the twrp recovery) and tried installing Resurrection Remix. Again flashed the relevant boot.img too. But the same result..
Did i destroy my phone?
Click to expand...
Click to collapse
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
dado323 said:
can you enter in recovery ?
wipe dalik,chace,chace,data then go to,mount select system,chace,data,2gb extra data ,and disabel mtp
if your phone dot show up just leave it on select partions to mount ,unplug cable then plug it back,go to device manager btw and see will it show there
Click to expand...
Click to collapse
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
anoopknayak said:
Yes I can enter recovery. But again I just cant get any lollipop ROM's working. I dont know whether i have to restore to kitkat(i really dont want too..
I dont get it.. Wipe dalvik cache, cache, data and then disable mtp and then enable mtp.. I mean at the end what does this do?
And in the meanwhile did you mean HTC Sync Manager for device manager. FYI I use a mac(if this helps to get into the problem). And i had flashed kitkat roms from the same without a hiccup but lollipop is failing
Click to expand...
Click to collapse
its hard to explain with recovery you can mount ur sdcard and put another room and install ,the easy way its to start from the begin and install clear CM12 and you will get out from bootloop that help me i was in bootloop like 3920489208420984920 times hahaha
anoopknayak
Have you solve the bootloop issue? I am having the same problem on my International One X
thanks
Probably both of you encountered the same problem as me.
If you are S-on, you have to flash rom and kernel separately. Also, if you try to revert any changes with twrp you have to flash kernel you were using during creation of backup, and then restore backup.
In other words: your current kernel is incompatible with rom.
Mwys
Yes i am S-ON. Can you tell me what the steps are to flash the kernel? I do not have a backup.
What is did was flash New Layout TWRP, did a complete wipe, then copied the ROM and G-Apps zips to the phone, installed them and then flashed boot.img.
Thanks for the help
Yup I also tried the same. but no luck. I tried to revert back to kitkat(by installing cwm, format the storage, sideloaded the ROM and gapps, flashed the boot.img) and still again in bootloop.
Sorry for the delay. I was a lot too busy with work.