Black screen no comunication with computer - Samsung Galaxy Nexus

Hi guys...
My galaxy nexus is bricked..
No matter what i do screen is black ..
I think i can put it in download mode by pressing both volume and power button coz i can feel it vibreting ..
My pc can see it as Anroid Device and then Google Galaxy Nexus BootLoader Interface
Plese help...:crying::crying:
Got odin to workin
I flashed rom and this is what i got ,,,
But still phone is dead
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_I9250XWKK9_user_ITL41F_163575.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> userdata.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!

Related

[Q] Stuck in bootloop after flashing Android_Revolution_HD-Note2_20.1

Hi,
A brief background...I downloaded and flashed Android_Revolution_HD-Note2_20.1 successfully...
After completing all the things I was checking SU and tried updating it when it asked me i choose TWRP/CWM and the phone restart with bootloop... and can't enter recovery...
What should I do now...I am stuck badly!!! Please help
Thanks in advance
Cheers
additional info
I tried to flash stock rom and it failed
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100DDUEML4_N7100ODDEML2_N7100DDEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!

[Q] [Help] NAND Write Start!!

I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
onqq said:
I was on T889UVALL4, use Odin to flash root66_TMO_T889UVUCMK7_2.tar.md5, got PASS, phone stuck in boot loop, can not get into recovery mode, so I try flashing again and got the following error. ( i flash KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 with the same result)
Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_TMO_T889UVUCMK7_2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
here is the Odin log for stock firmware:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_T889UVALL4_T889TMBALL4_598701_REV04_user _low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My question is: Can this be fix with Odin? or do I need to fix a shop that can repair the EMMC? if it is the latter, does anyone know where to find a trust worthy shop with in the San Francisco bay area?
Thanks
Click to expand...
Click to collapse
I found a pit file and try flashing with Odin, here is the output:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Does that mean my EMMC is corrupted and needs repairing? :crying:
Boot into recovery and Factory/Data Reset
See if that helps
Double0EK said:
Boot into recovery and Factory/Data Reset
See if that helps
Click to expand...
Click to collapse
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
onqq said:
unfortunately, I can't get into recovery.
when I press volume up+home+power button, I just get a flashing Samsung Galaxy 2 logo (aka boot loop hell)
Click to expand...
Click to collapse
Get the tar file for the most recent TWRP and Odin that. Boot into recovery and factory reset. Try booting normally. If that fails try to Odin the UVALJ1 tar by MrRobinson. (2-3 times). Try booting normally. Once you can boot normally go ahead and try the MK7 tar.

flash grand i9082 failing

Hey guys!
Im trying to flash the stock rom, but I just wont work.
Logs:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXUBMGA_I9082OXEBMGA_I9082XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> vc-firmware.img
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> BcmCP.img
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I get failure are BcmCP.img
I am using a Odin 3.04
Still getting error, tried different USB ports, different cables, plenty different things
Can someone help? My phone is unusable

help tried to root and bricked phone note 4 SM-n910p

I tried to root my phone and it got stuck in bootloop , now every time I try to flash with Odin I get <ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910PVPU1ANK2_N910PSPT1ANK2_N910PVPU1ANK2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Ive tried all different stock firmware and all of them do the same
You were running kit kat when you tried to root? I ask because that is what you're trying to Odin. If you were ever on lollipop bootloader beyond OB7 you cannot downgrade.
Sent from my SM-N920P using Tapatalk

Galaxy Tab 3 Lite [SM-T110] Logo boot loop

Hi,
I was given a Tab 3 Lite which boot loop with logo.
I can not turn it off, and she reboot until the battery to 0%.
I tried with Odin but still error (v3.07 and v3.12.3 and with last sansung driver)
Do you have a solution?
Thank
T110XXUANI7_T110XEFANI1_T110XXUANI7_HOME.tar.md5
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110XXUANI7_T110XEFANI1_T110XXUANI7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> timh.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> obm.bin
<ID:0/003> DTim.Recovery
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
T110.CWM.v6.0.4.8.tar.md5
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T110.CWM.v6.0.4.8.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have pretty much the exact same Issue.
i have the same problem, any soution?
Has nobody found an answer to this issue yet? i'm having the same problem.

Categories

Resources