1. First, dump the csc file of your choice from XXJL2 firmware. Save these dumped files at desktop.
You will need to use some files/folders here to replace some in the bada 2.0 OXA csc file.
2. Now use Trix to dump and edit the "CSC_S8500_Open_Europe_Common_OXA_KG5" csc file
3. With Trix still open, go to the dumped files and edit as follows:
a. Delete folder "CSC" and replace it with the "CSC" folder from XXJL2 (the one you saved at desktop in nº 1 above).
b. After replacing, Open the new CSC folder and edit the "SW_Configuration" xml file:
<CustomerDataSet>
<CSCName>S8500OXC</CSCName> *
<CSCVersion>KG5</CSCVersion> **
* make sure the CSCName displays your own csc, e.g OXC, OXD, etc (should be by default)
** change the CSCVersion to KG5 (not JL2), and SAVE FILE.
4. Now open folder "SystemFS" ==> open folder "Settings" ==> open folder "PreConfiguration" ==>
...In folder "PreConfiguration", delete all folders and files therein except the folder "Default".
...copy in (to replace) from your XXJL2 dumped files (nº 1 above),
all folders and files from the "PreConfiguration" folder except the folder "Default".
5. Finally, upload the files in Trix and name it, e.g. CSC_S8500_Open_Europe_Common_OXCKG5.csc
6. That's all. You now can flash bada 2.0 firmware with your own csc file.
NB: I have uploaded the OXC csc file (Greece, Spain and Portugal),
CSC_S8500_Open_Europe_Common_OXCKG5 for those who may need it.
Download from: http://www.megaupload.com/?d=036VSJHI
That way is not applicable for other regions to get more languages (just Europe)
Correct me if i am wrong
Best Regards
mylove90 said:
That way is not applicable for other regions to get more languages (just Europe)
Correct me if i am wrong
Best Regards
Click to expand...
Click to collapse
Yes, this method is based on the Europe XX firmware.
Works 100% for Europe as the files and settings are almost similiar.
For other regions, I don't know if the process may work or not.
Firmwares from different regions differ in so many aspects;
so I am afraid this process may likely not work.
But anyone from other region can try it and give us feedbacks.
Can I make a CSC file for bada 2.0 to Nordic countries?
What happens? Will I get Norwegian if I want? =)
christer12 said:
Can I make a CSC file for bada 2.0 to Nordic countries?
What happens? Will I get Norwegian if I want? =)
Click to expand...
Click to collapse
Yes, you can.
Just follow the steps as described above.
You will get Norwegian (it's under the same csc for Nordic)
I have tried now, but It was not in Norwegian. Can not get Norwegian keyboard, but the settings are correct. They have not added Norwegian language and keyboard. Whether If I have changed the CSC file.
spacks said:
1. First, dump the csc file of your choice from XXJL2 firmware. etc...
Click to expand...
Click to collapse
Hi spacks!
I followed your steps and created a CSC_S8500_Open_Europe_Common_OXD_KG5.csc (with XEH because I'm hungarian) but when I flash it and do a preconfig to XEH it bootloops... What could be the problem??? I used this : CSC_S8500_Open_Europe_Common_OXDJL1.csc for the "transplantation"
sorry for my English... Trix this is the program? if yes, where can I download it? and this method will work for Ukraine? (this is also Europe)
Hello anghelyi,
For all XX region firmwares, this process works ok.
I have not tested the XE region. Though XE is Europe, but the XE firmware is quite distinct from that of XX.
If you can upload the csc file from the last bada 1.2 of your region, maybe I can test it myself and give you feedback.
Thanks.
Slayerqq said:
sorry for my English... Trix this is the program? if yes, where can I download it? and this method will work for Ukraine? (this is also Europe)
Click to expand...
Click to collapse
You can download Trix from here: http://www.mediafire.com/?twu1ixb6ei211qb
or directly from TriX home page
As this is your first time to use Trix, I will advise you wait and let someone else who is experienced do the check first if this same process works for Ukraine.
I have only tested it for XX region which does not include Ukraine.
I think Ukraine belongs to the XE region.
spacks said:
Hello anghelyi,
For all XX region firmwares, this process works ok.
I have not tested the XE region. Though XE is Europe, but the XE firmware is quite distinct from that of XX.
If you can upload the csc file from the last bada 1.2 of your region, maybe I can test it myself and give you feedback.
Thanks.
Click to expand...
Click to collapse
Hi spacks!
Many thanks for the info. I uploaded the csc here: http://www.multiupload.com/O24UCOXPM7
Most certainly I made some stupid mistake...
TIA!
spacks said:
Hello anghelyi,
For all XX region firmwares, this process works ok.
I have not tested the XE region. Though XE is Europe, but the XE firmware is quite distinct from that of XX.
If you can upload the csc file from the last bada 1.2 of your region, maybe I can test it myself and give you feedback.
Thanks.
Click to expand...
Click to collapse
posted to file Russia (SER), please try to change it to BADA 2
but I can not put a link. How can I send it to you?
anghelyi said:
Hi spacks!
I followed your steps and created a CSC_S8500_Open_Europe_Common_OXD_KG5.csc (with XEH because I'm hungarian) but when I flash it and do a preconfig to XEH it bootloops... What could be the problem??? I used this : CSC_S8500_Open_Europe_Common_OXDJL1.csc for the "transplantation"
Click to expand...
Click to collapse
Hello anghelyi,
I have tried with the OXDJL1 CSC file you uploaded.
Same like your experience, as soon as you set pre-configuration to XEH,
the phone goes into endless rebooting process.
CONCLUSION: As this new bada 2.0 firmware is for the XX Europe region,
the process described here for creating each country CSC file
only applies to the XX Europe region.
Other Europe region like XE (Hungary, Russia, etc) will not work.
Thanks for your understanding.
spacks said:
Hello anghelyi,
I have tried with the OXDJL1 CSC file you uploaded.
Same like your experience, as soon as you set pre-configuration to XEH,
the phone goes into endless rebooting process.
Click to expand...
Click to collapse
Thank you anyway! As the SDK has hungarian language I think the final 2.0 will come with hungarian CSC, so it's more like interesting than a real problem Thanks again for your time!
hi ! . I have one ask I find it amusing to stop that one for it none app develop can!!! Why one cannot develop one app for bada where one the language which one needs in the mobile phone add can that would be super a geile app. Thus is that possible upper not young? and if not why?? You cannot do Androide oversize wave portieren however one spoke to add goes??!!! thanks
mylove90 said:
That way is not applicable for other regions to get more languages (just Europe)
Correct me if i am wrong
Best Regards
Click to expand...
Click to collapse
I have one ask I find it amusing to stop that one for it none app develop can!!! Why one cannot develop one app for bada where one the language which one needs in the mobile phone add can that would be super a geile app. Thus is that possible upper not young? and if not why?? You cannot do Androide oversize wave portieren however one spoke to add goes??!!!
Can i change the CSC for getting the firmware in hebrew (Israel)?
And if yes to what setting to change the CSC i didn't anderstand on Samfirmware what is my CSC
gilkzxc said:
Can i change the CSC for getting the firmware in hebrew (Israel)?
And if yes to what setting to change the CSC i didn't anderstand on Samfirmware what is my CSC
Click to expand...
Click to collapse
You need to know first, what csc Israel uses. If the csc falls under the XX Europe firmware group, then the process of changing csc will work for you. Otherwise, I am afraid not.
To check your CSC version, enter in your phone keypad the following: *#1234#
spacks said:
You need to know first, what csc Israel uses. If the csc falls under the XX Europe firmware group, then the process of changing csc will work for you. Otherwise, I am afraid not.
To check your CSC version, enter in your phone keypad the following: *#1234#
Click to expand...
Click to collapse
but it isn't from the XX Europe firmware group it's has it's own diffrent
and it's won't recongniz at Samfit
this is my firmware try to help find the right group
(in the picture)
what understand is that is bada 1.0.2 August 2010
and PTR is for Orange Israel but i don't know what is this S8500JHJH3
and i check it isn't the israel offical group for every cellolar compeny in Israel on the CSC diffrent
like this:
PTR = Orange Israel
PCL = Pellephone Israel
CEL = Cellcom Israel
for india can u make it and uplaod it?
Hello there.. Since im not satisfied with the performance of JB on my phone, I'd like to downgrade to GB...
And please dont try to convince me to keep it.. i tried some things others suggested me, it still doesnt work for me , sadly.
So could anyone help me out with a download? I cant find full GB rom anywhere.... Only the one wich contains PIT file. But i need all 3 of the files (forgot the names)
I need one for Baltic (SEB)
Hope anyone can help me out.
Thanks
hy,
download this zip, contain pit file, pda and csc COA,
after you flash this flash again the firmware for your region SEB
https://mega.co.nz/#!10UnBQhB!CJ8h-FGjE83yq74QchdE-z2-oOBzWS97m6F1hSRuBxs
b0g said:
hy,
download this zip, contain pit file, pda and csc COA,
after you flash this flash again the firmware for your region SEB
https://mega.co.nz/#!10UnBQhB!CJ8h-FGjE83yq74QchdE-z2-oOBzWS97m6F1hSRuBxs
Click to expand...
Click to collapse
thank you very much! Ill try this and post here if it worked .
Thay you very much! Finnaly got it back to GB, now I just hope to see it perform as good as before.
b0g said:
hy,
download this zip, contain pit file, pda and csc COA,
after you flash this flash again the firmware for your region SEB
https://mega.co.nz/#!10UnBQhB!CJ8h-FGjE83yq74QchdE-z2-oOBzWS97m6F1hSRuBxs
Click to expand...
Click to collapse
is it the same files as in this post [HOW-TO] Come back from JB to GB ?
cuz i tried those and it didn't work form and i'm stuck at boot "samsung galaxy ace 2 GT-I8160"
i tried everything I found about the subject but no luck
anyway I'll try those file and if you know anything about this issue please tell me
thank you
hy,
is not the same firmware,
my firmware is I8160XXLL2
other firmware is I8160XXLK6
Thanks
b0g said:
hy,
is not the same firmware,
my firmware is I8160XXLL2
other firmware is I8160XXLK6
Click to expand...
Click to collapse
It didn't work for me and I posted a Q here [Q] Ace II stuck at "samsung galaxy ace 2 GT-I8160"
Thanks anyway
Hey,
I have samsung galaxy A5 A520F/DS UAE version.I have attached its original Firmware details.In order to use jio voice of over lte i have updated INU Indian firmware.Now my device
Droped and receiver is not working.I want to claim warranty.In samsung info now my firmware details show multi csc and my baseband chaged.
My Question is
1.Will i get warrenty if i just download and flash XSG uae firmware through Odin ?
2.Will it change my base band to original version ?
3.I Don't know wheather its UAE XSG OR LYS.is there any way to know this from screenshots attached ?
Sorry unable to add attachments it fails please reply with provided information.i can't share even image link because am new user.
And how do i attach screenshot
Please reply
1- there is no picture attached .
2- flashing official firmware does not void the warranty as it does not trigger knox switch.
3- Better use the modem attached with the firmware as they are optimized to work together and avoid triggering knox while flashing only one component of the firmware.
4- You can find weather it is XSG or LYS only in recovery and not in software information.
shafez said:
1- there is no picture attached .
2- flashing official firmware does not void the warranty as it does not trigger knox switch.
3- Better use the modem attached with the firmware as they are optimized to work together and avoid triggering knox while flashing only one component of the firmware.
4- You can find weather it is XSG or LYS only in recovery and not in software information.
Click to expand...
Click to collapse
When i attach a screenshot it says bad request.I have attached screenshots links.
What you mean by one component?.please be specific.my current csc is ins.
https://ibb.co/kCv3X6
https://ibb.co/ghPGKm
https://ibb.co/jTB2s6
These are my screenshots before i did flash ins firmware using odin which is downloaded from sammobile .
I want warranty for changing my receiver. So do i need to go back to original Firmware for getting warranty.my device is still official in downloading mode.
And i don't know which is my original Firmware xsg/lys
In downloading mode after flashing its says successfully applied multi csc and its inu
Hey guys can someone help understand this error. I've taken a screen shot of it
It seems that this error is causing my Samsung members to be in French.
Another issue is software version showing XEF/XEF/VAU. Which is linked to the whole French language thing.
I've tried flashing using the original Vodafone firmware but doesn't seem to overwrite the current XEF revision
a bit more detail would help; you have what model with what firmware and trying to install what firmware?
Hi sorry for the lack of info
So originally I had purchased a note 10 plus sm-n975f model from Vodafone Australia. During the course of flashing using Odin it seems I may have flashed a BTU firmware which has made the default language French. I have since tried to flash original Vodafone Au firmware using home CSC and CSC however this error pops up. It seems it won't over write the CSC
rhath127 said:
Hi sorry for the lack of info
So originally I had purchased a note 10 plus sm-n975f model from Vodafone Australia. During the course of flashing using Odin it seems I may have flashed a BTU firmware which has made the default language French. I have since tried to flash original Vodafone Au firmware using home CSC and CSC however this error pops up. It seems it won't over write the CSC
Click to expand...
Click to collapse
If worst comes to worst...or just for ease, look into the app SamKey. Will allow you to change your csc without root.
Sent from my [device_name] using XDA-Developers Legacy app
Hi to all.
Last week I got A50. During first boot of system I didnt inserted SIM card ant it seems that it triggered installing firmware for diferent region. Im located in Serbia but firmware is for Turkey and I have many apps on turkish language without posibility to change language in those apps.
Is any method to change CSC?
Thanks in advance!
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Alexxxx1 said:
Ok, no answer yet. Maybe to precise my question,
Could someone tell me which files I need to use to change my current CSC Turkey to lets say Israel CSC ILO.
I suppose it could be done with Odin but which versions of firmware...
Thanks
Click to expand...
Click to collapse
Did you learn how to do?
Sent from my [device_name] using XDA-Developers Legacy app
Nope, Im totaly disapointed in comunity in section for model A50. There is no answers, there is no tutorials, there is no custom roms except two of them, and I will probably sell this phone.
Regards
Sent from my SM-A505F using Tapatalk
you should download https://www.sammobile.com/samsung/galaxy-a50/firmware/SM-A505F/TUR/download/A505FDDU4BTC9/330469/ this version, and use odin to flash it in your phone. Keep the sim in the phone for the process, because with that it will verify you are in turkey.
Although in odin the process may work if you use the HOME_CSC file to keep the data of your phone intact, i would suggest using the other file, because with that you'll have a fresher device