Develop Bugs

[Q] Black screen with htc logo and 4 warning triangles

Right i'm a bit of a noob at all this and have got myself in a bit too deep!!!
The problems started after applying the CM7 hboot and s-off with aplpharev. (which seemed to go OK)
After applying a new rom i got stuck in a boot loop so tried other roms from recovery and had the same problem, Nandroid also wouldn't restore.
I then decide it would be best to flash an RUU which went tits up and has lead to the black screen with 4 triangles in each corner. I have tried several other RUUs but no luck either. I also cannot boot in to recovery at all now.
When i plug and unplug the device to a pc, it gives the following info:
AlphaRev CM7 r2
Bravo PVT3 Ship S-Off
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
Pluging it in returns it to the black screen
I have trawled the forums but nothing seems to work (i have resorted to creating a thread after 2 days of trying things!)
Any chance of an idiots guide from a guru on how to get the device usable again? (bearing in mind my reasonably limited knowledge!)
I know there are many threads on this already but i can't seem to find a fix that works.
Ta Much

Can't look into this too much right now but I'm pretty sure your RUU flash failed because you're using the r2 version of that HBOOT which has something in it that prevents it from being over-written by the RUU. Try flashing the Downgrader HBOOT and then give the RUU a shot. Should get you back to stock.
Also, move this to the Q&A thread.

Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App

I have same problem two days ago. Mine stuck at CM7 r2 partition while RUU need 250MB of system partition. After fighting around 4hours then I try to to flash HBOOT downgrader and then flash stock HBOOT then run RUU again.
Once alive I am rooting it again again and flash custom rom since I am not satisfied with original rom hahaha..
Sorry for my bad english.
Sent from my HTC Desire using XDA App

You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App

reaper7881 said:
Boot in to fastboot then
plug in usb
Then run ruu. As administrator if you have windows 7/vista
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do i boot to fastboot (power and vol down doesn't do anything)?

I had same problem when running ruu to return to stock from rooted, soff etc.
Just unplugged, plugged back in and re-ran ruu then everything was ok.

jordan.harris01 said:
You just need to flash the downgrader hboot to flash the ruu.. And only if you are using one of the new r2 hboots. The ruu will over write the hboot so no point in flashing the downgrader and then the stock.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Again, may be being stupid, but how do i flash the hboot the only screen i can access is the htc and 4 triangles?

try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi

stupsi99 said:
try to cool down your device and flash again...
it sounds stupid, but it works for me.
i put my device without battery in fridge for 5 minutes, then i flash again and it works.
if the device warms up it stop working.
mine have hardware fault.
br stupsi
Click to expand...
Click to collapse
Have actually tried this and no joy!

Hi guys I had this problem yesterday and I managed to bring back to normal just reinstall the stock hboot after you instal stock hboot restart the phone and install RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed

How I can install stock hboot if I can't get into fastboot? oO

try holding the back button instead of volume down
Sent from my HTC Desire using XDA App

No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot

the butons not working the phone is automaticaly in fastboot

en_mih said:
No need to get in fastboot must have HTC logo on dysplay and triangles in the corners and then open the install program that hboot
Click to expand...
Click to collapse
How are you installing hboot then? I am using alpharev and when i plug the device in it doesn't recognise it and just says searching for device.

open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life

http://www.2shared.com/file/nxR9F2RN/AndroidFlasher180.html

en_mih said:
open android flasher conect your phone to usb cable verify the phone to be open and then select on android flasher hboot select the stock hboot wait 1 or 2 seconds and then open the Ruuand wait and your phone is back to life
Click to expand...
Click to collapse
You my friend are a ****ing genius!!!!
I had Android flasher sat on my desktop as well.
New hboot, new Ruu... BOOOOOOOOOOOOOOOM.......
A fully working desire again.
Please accept my sincerest thanks!

im so hapy for you man

[Q] RUU Error-Radio update fail

I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance

which RUU.exe did you use?

this one
RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.06.00.02_2_release_127568_signed

vmax007 said:
I am trying to return my Desire to stock so that I can hand it down in the family, since i got a new GNex. while trying to run RUU during the radio flash, the phone vibrates multiple times and the RUU process fails.
Now am stuck with HTC logo and 4 "!" marks in the corners.
this is what i can see now...
this is what I see
AlphaRev Unlock (in pink)
BRAVO PVT4 SHIP S-OFF
HBOOT 6.93.9999
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO 5.17.05.23
Aug 10 2010, 17:52:19
RUU
Please help...thanks in advance
Click to expand...
Click to collapse
have a look at the first sticky post at the top of the Q&A thread, i'm pretty sure it covers it

i did try the sticky thread... but i am not able to achieve S-ON even after flashing bravo_downgrader

Try the unsigned version of the RUU in this tread: http://forum.xda-developers.com/showthread.php?t=695667
If this doesn't work try one of the WWE versions.
EDIT: see also this thread, which discusses the same issue: http://forum.xda-developers.com/showthread.php?t=1191565

thanks for the quick replies...
i think i have moved a step forward.
Running a WWE RUU managed to move it to:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.27
Aug 10 2010,17:52:10
RUU
Running RUU again errors out saying bootloader errror...

why did you execute the RUU again?

because i couldnt do anything else .. #fml

[SOLVED]
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!

vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
sir I also was stuck with four '' ! '' marks. please tell me how did you solve this problem.
I'm in a real problem please help me.
thanks

Similar problem
vmax007 said:
Yaay solved the problem by downloading the android 2.3 upgrade RUU from htcdev site and now back to stock!! YES!
Click to expand...
Click to collapse
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?

racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
You can now use your desire as a very expenive mirror.

Boot / flash recovery
racery said:
Hey guys, I had a HTC Desire that started working very strange. It was constantly freezing at the HTC logo (booting). After removing the battery for a few minutes, I could turn on the phone again. I tried rooting, it always failed. Then I tried installing 2.3 via HTC Dev official software. Followed all the instructions and had a RADIO_V2 - Fail PU. The RUU enters recovery mode: I unplug, remove battery for 3 seconds, then plug again and it runs the same procedure: RADIO_V2 - Fail PU again. I just tried 4x and nothing. The phone is bricked. If I try to boot holding volume down, it won't go to recovery, it just turns black with ! sign in all corners.
I am just afraid my Desire has some hardware problem, but in any case, now it is bricked. Any suggestions?
Click to expand...
Click to collapse
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.

tjsantos said:
Download a recovery img for the phone, plug it in and run 'fastboot boot [recovery.img]' to boot into recovery or 'fastboot flash recovery [recovery.img] to flash and then boot into recovery.
Click to expand...
Click to collapse
If radio bricks were that easy to solve, then this would be a better world.

Desire HD problem with installing rom - chip fried?? or not?

Hi all,
I had until 3h ago sabsa prime v16 installed on my phone - when I was reading e-mails in yahoo mail app the screen became black (with no illumination - like the phone was turned off), the only way to unfreeze and restore it was to remove the battery - the phone was completely blocked.
I decided to change the rom, and install viper rom.
In the recovery (CWM 5.0.2.0) i choose "wipe data/factory reset", when al the process finishes i get this errors:
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I try to install the other rom the process of installation does not finish...
I read on other threads that if I get this message maybe some chip is broken (fried?), that because I removed the battery when the phone was freezed (but if it was not responding what can I do???)...
How can I fix this?
Plz help..
Thanks to all
ps. sorry for bad english

johnny_bravo01 said:
Hi all,
I had until 3h ago sabsa prime v16 installed on my phone - when I was reading e-mails in yahoo mail app the screen became black (with no illumination - like the phone was turned off), the only way to unfreeze and restore it was to remove the battery - the phone was completely blocked.
I decided to change the rom, and install viper rom.
In the recovery (CWM 5.0.2.0) i choose "wipe data/factory reset", when al the process finishes i get this errors:
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
And when I try to install the other rom the process of installation does not finish...
I read on other threads that if I get this message maybe some chip is broken (fried?), that because I removed the battery when the phone was freezed (but if it was not responding what can I do???)...
How can I fix this?
Plz help..
Thanks to all
ps. sorry for bad english
Click to expand...
Click to collapse
Are you able to boot in hboot? if you phone is not able to boot at all, then it is a hardware issue but if you are able to boot in hboot you can try flashing a RUU.

glevitan said:
Are you able to boot in hboot? if you phone is not able to boot at all, then it is a hardware issue but if you are able to boot in hboot you can try flashing a RUU.
Click to expand...
Click to collapse
The Hboot is the AAHK bootloader? That with Fastboot Recovery Factory Reset Simlock Image crc options?
Yes, i can boot into this...
How can I flash a RUU?
Sorry I'm a noob!!! :laugh:

johnny_bravo01 said:
The Hboot is the AAHK bootloader? That with Fastboot Recovery Factory Reset Simlock Image crc options?
Yes, i can boot into this...
How can I flash a RUU?
Sorry I'm a noob!!! :laugh:
Click to expand...
Click to collapse
ok, that is hboot. Choose recovery and see if you still have CWM recovery installed. If you have try flashing a new rom...and see what happens...not the ones that you already tried but a different one.

Try a stable ROM, like Revolution HD 6.6. Other might work as well, but if you try a rom based on the original drivers+a decent kernel you should be fine if the hardware is still ok.

r100 said:
Try a stable ROM, like Revolution HD 6.6. Other might work as well, but if you try a rom based on the original drivers+a decent kernel you should be fine if the hardware is still ok.
Click to expand...
Click to collapse
As long as hardware is fine, he can flash whatever he wants, stable or not...the main concern is to find whether his emmc chip is fried or not.

I tried to install another rom (Jellytime and moonraker), the same result, the installation process stops at ca. 70%.
Aroma installer (for sabsa and viper) says that the installation is complete, but in fact it is not.
My question: is it possible to flash the stock rom without the phone turned on? I mean directly from the bootloader..
I downloaded this file: RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed that seems to be the latest stock rom..
second question: Exists a procedure to follow like this one: http://forum.xda-developers.com/showthread.php?p=33917375 but for my phone, or not?
Thanks to all for the answers!

johnny_bravo01 said:
I tried to install another rom (Jellytime and moonraker), the same result, the installation process stops at ca. 70%.
Aroma installer (for sabsa and viper) says that the installation is complete, but in fact it is not.
My question: is it possible to flash the stock rom without the phone turned on? I mean directly from the bootloader..
I downloaded this file: RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_Radio_12.65.60.29_26.14.04.28_M_release_225512_signed that seems to be the latest stock rom..
second question: Exists a procedure to follow like this one: http://forum.xda-developers.com/showthread.php?p=33917375 but for my phone, or not?
Thanks to all for the answers!
Click to expand...
Click to collapse
Yes. Relock the bootloader and flash the ruu in fastboot. Iy has to be you specific ruu as you are still S-ON.
Sent from my GT-N7100 using xda app-developers app

glevitan said:
Yes. Relock the bootloader and flash the ruu in fastboot. Iy has to be you specific ruu as you are still S-ON.
Click to expand...
Click to collapse
Ehm... how can I do this?? :laugh:

johnny_bravo01 said:
Ehm... how can I do this?? :laugh:
Click to expand...
Click to collapse
What did you use to unlock the bootloader? You can use this to relock the bootloader:
http://forum.xda-developers.com/showthread.php?t=2169518

r100 said:
What did you use to unlock the bootloader? You can use this to relock the bootloader:
http://forum.xda-developers.com/showthread.php?t=2169518
Click to expand...
Click to collapse
I used aahk..
Is it possible to use another tool to relock?
My problem is that I can not turn on the phone... the relock process can be done with the phone turned off (only in bootloader)?
Now I have:
***** AAHK *****
ACE PVT ENG S-OFF RL
HBOOT-0.85.2425
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
Ok, i tried to run that tool, this is the result:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

johnny_bravo01 said:
I used aahk..
Is it possible to use another tool to relock?
My problem is that I can not turn on the phone... the relock process can be done with the phone turned off (only in bootloader)?
Now I have:
***** AAHK *****
ACE PVT ENG S-OFF RL
HBOOT-0.85.2425
MICROP-0438
RADIO-26.10.04.03_M
eMMC-boot
Apr 12 2011,00:55:45
Ok, i tried to run that tool, this is the result:
Click to expand...
Click to collapse
you are already S-OFF, so what are you trying to do exactly? Are you sure that your bootloader is unlocked? It is useless to unlock it being S-OFF.

I'm trying to relock it,
i understood from your post
glevitan said:
Yes. Relock the bootloader and flash the ruu in fastboot. Iy has to be you specific ruu as you are still S-ON.
Click to expand...
Click to collapse
that I can not try to install the original ruu without the bootloader locked..

Hi all,
I re-open this td because my phone is still broken... (yes, after 3 months :laugh::angel - i had no time to think to repair it... and in this period I used my old Nokia N95 8GB...
I am in this situation now:
I have this bootloader:
ACT PVT SHIP S-OFF RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
Sep 7 2011, 19:06:24
I don't have any recovery installed,
when I tried to install the original ruu, I don't know what happened but at some point (50-55%) it skipped very quickly to 80%. My impression is that the utility can't write some files on the internal memory of the Dhd...
I tried to install CWM recovery using this method: http://forum.xda-developers.com/showthread.php?t=1179386 but I cannot complete all the passages because the phone don't recognize the PG05IMG.zip file.
If I try to turn on normally (without booting into bootloader) the phone remains stuck with HTC logo, and restarts (boot loop) - like I said before, I am not completely sure that the ROM is fully installed.
What can I do at this point?
The phone is out of warranty, and I think that if I send it to HTC to repair will cost very much money... no sense with a 3 year-old phone...

That recovery is for a htc thunderbolt and I don't think it is a good idea to put that on your htc desire hd. Fyi the corret file name is PD98IMG.ZIP.
Sent from my GT-I9505 using xda app-developers app

Help: Bootloader corrupt

Hi everyone
my friend give me his DHD that I install ICS rom on it
I had unlocked bootloader via htc , and installed recovery , flashed Stock rooted rom
then I flash 4ext recovery trought 4ext recovery updater
then I wont to s-oof and I used "EasyS_OFF" package
now it messaged that bootloader corrupt, Do not rebbot and Seek help from XDA
WHAT I SHOULD DO ? pls help me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ardanai said:
Hi everyone
my friend give me his DHD that I install ICS rom on it
I had unlocked bootloader via htc , and installed recovery , flashed Stock rooted rom
then I flash 4ext recovery trought 4ext recovery updater
then I wont to s-oof and I used "EasyS_OFF" package
now it messaged that bootloader corrupt, Do not rebbot and Seek help from XDA
WHAT I SHOULD DO ? pls help me
Click to expand...
Click to collapse
Have you read this from the tool thread??
NOT COMPATIBLE WITH DEVICES SHIPPED WITH GINGERBREAD 2.3 Or Updated bootloaders. No longer Supported
Nice job buddy, you have messed your bootloader and put it in superslow motion...only way to fix it is this one....(not painless thou)
http://tau.shadowchild.nl/attn1/?p=188

glevitan said:
Have you read this from the tool thread??
NOT COMPATIBLE WITH DEVICES SHIPPED WITH GINGERBREAD 2.3 Or Updated bootloaders. No longer Supported
Nice job buddy, you have messed your bootloader and put it in superslow motion...only way to fix it is this one....(not painless thou)
http://tau.shadowchild.nl/attn1/?p=188
Click to expand...
Click to collapse
tank you man
I went to http://tau.shadowchild.nl/attn1/?p=188 and I did everything
But I get failed in CMD as below image
now I have bootloader, hboot 2.00.0029 unlocked
But Splash screen will be as long as 15 - 20 minutes
How can I fix it ?

ardanai said:
tank you man
I went to http://tau.shadowchild.nl/attn1/?p=188 and I did everything
But I get failed in CMD as below image
now I have bootloader, hboot 2.00.0029 unlocked
But Splash screen will be as long as 15 - 20 minutes
How can I fix it ?
Click to expand...
Click to collapse
Relock bootloader first. In fastboot type: fastboot oem lock
Then try hboot fix again

glevitan said:
Relock bootloader first. In fastboot type: fastboot oem lock
Then try hboot fix again
Click to expand...
Click to collapse
I relocked bootloader , now I get failed again
Can I install RUU with htc sync to get stock hboot without slow motion ?

ardanai said:
I relocked bootloader , now I get failed again
Can I install RUU with htc sync to get stock hboot without slow motion ?
Click to expand...
Click to collapse
You then need to downgrade your main version...not easy to do with a messed bootloader.
Does your bootloader say S-OFF?

glevitan said:
You then need to downgrade your main version...not easy to do with a messed bootloader.
Does your bootloader say S-OFF?
Click to expand...
Click to collapse
no, it is s-on
and now I dont know what I should do ?
with bootloader relocked I cant install RUU to get correct hboot
and with unlocked bootloader I can't install any custom rom or doing s-off

Read http://tau.shadowchild.nl/attn1/?p=188 carefully i have used this methord not only to S-Off but to S-On as well.

hacktrix2006 said:
Read http://tau.shadowchild.nl/attn1/?p=188 carefully i have used this methord not only to S-Off but to S-On as well.
Click to expand...
Click to collapse
I read it , but I get failed that I showed it in previews post

ardanai said:
I read it , but I get failed that I showed it in previews post
Click to expand...
Click to collapse
Then You will Need To gain temp root And downgrade the Main version first

ardanai said:
no, it is s-on
and now I dont know what I should do ?
with bootloader relocked I cant install RUU to get correct hboot
and with unlocked bootloader I can't install any custom rom or doing s-off
Click to expand...
Click to collapse
With UNLOCKED bootloader you cann't do anything
Let's LOCKED bootloader again then flash RUU to return stock (optional), then use newest Ace Hack Kit to S-Off your phone.
Some phone have difficulty to use AAHK directly, so you might be need to make sdcard as gold card first then copy PD98IMG.zip for your branch to sdcard before using AAHK

coolpixs4 said:
With UNLOCKED bootloader you cann't do anything
Let's LOCKED bootloader again then flash RUU to return stock (optional), then use newest Ace Hack Kit to S-Off your phone.
Some phone have difficulty to use AAHK directly, so you might be need to make sdcard as gold card first then copy PD98IMG.zip for your branch to sdcard before using AAHK
Click to expand...
Click to collapse
I suggest that You Read better before recommending that, that will brick his device.

glevitan said:
I suggest that You Read better before recommending that, that will brick his device.
Click to expand...
Click to collapse
What are the reasons of brick phone ?
I've read thru all post before reply
My experience are:
My phone is 2.3.5 Sense 3.5 version 3.17.0010...hboot 2.0.0030
- First time of using AAHK to S-Off failed many times, then I choose method of Unlock bootloader by htcdev to flash custom rom
- Someday, I need change the flash splash screen, radio and kernel then I find that I need to get S-Off to do so
=> I relocked bootloader also by inverse method of htcdev then flash RUU rom agian back to original, then use AAHK. This time, It success-S-off. that's all
PS: I think that it is not mesh hboot
He cann't install RUU rom because he hasn't found correct RUU for his branch phone.
eg: My case, my phone from CID: 01__KT (KTF Korea) so I have to find my RUU for KT
In his case I don't know ...He must have to find correct RUU so can be install after RELOCK bootloader

coolpixs4 said:
What are the reasons of brick phone ?
I've read thru all post before reply
My experience are:
My phone is 2.3.5 Sense 3.5 version 3.17.0010...hboot 2.0.0030
- First time of using AAHK to S-Off failed many times, then I choose method of Unlock bootloader by htcdev to flash custom rom
- Someday, I need change the flash splash screen, radio and kernel then I find that I need to get S-Off to do so
=> I relocked bootloader also by inverse method of htcdev then flash RUU rom agian back to original, then use AAHK. This time, It success-S-off. that's all
PS: I think that it is not mesh hboot
He cann't install RUU rom because he hasn't found correct RUU for his branch phone.
eg: My case, my phone from CID: 01__KT (KTF Korea) so I have to find my RUU for KT
In his case I don't know ...He must have to find correct RUU so can be install after RELOCK bootloader
Click to expand...
Click to collapse
Then You didn't Read Well. He flashed a froyo Ruu And messed his bootloader. Flashing a ruu will definitely Make things worse. Hack kit will fail as the bootloader Is in super Slow motion, not To mention that hack kit has been retired And so has support

I think my problem is about missed or double HBOOT
Also I have high speed internet and I can download and flash any RUU
I have this RUU: RUU_Ace_Sense30_S_HTC_WWE_3.12.405.1_R_Radio_12.65.60.29_26.14.04.28_M_release_233505_signed
but when I relocked and installed this RUU, I get error 140(Bootloader version error)
After it I make goldcard , then exclude rom.zip from this RUU, rename it to PD98IMG.zip, but after checking it in bootloader nothing occurred
and it didn't ask me press vol down to install PD98IMG.zip
now which RUU I should download and install?
this is my fastboot getvar all
Code:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0029
INFOversion-baseband: 26.14.04.28_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 3.13.0.0
INFOserialno: HT23VRX02120
INFOimei: 356357048251387
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: HTC__102
INFObattery-status: good
INFObattery-voltage: 3784mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: fcef1579
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!

glevitan said:
Then You will Need To gain temp root And downgrade the Main version first
Click to expand...
Click to collapse
How Can I downgrade the main version? I did it for my EVO3D, But in 2 years ago and I forget that method

ardanai said:
How Can I downgrade the main version? I did it for my EVO3D, But in 2 years ago and I forget that method
Click to expand...
Click to collapse
There is something weird about your issue. The bootloader doesn't seem to be a froyo one, however corruption of the bootloader occurs when flashing a froyo ruu. I would recommend that you contact the developer of the tool to see how it works because I have no clue on what it does and how.
If you want to try to downgrade the main and then try the hboot fix, you will need some knowlegde of adb commands. Just let me know and I will address you in the right direction. I gotta look for the information first.

glevitan said:
There is something weird about your issue. The bootloader doesn't seem to be a froyo one, however corruption of the bootloader occurs when flashing a froyo ruu. I would recommend that you contact the developer of the tool to see how it works because I have no clue on what it does and how.
If you want to try to downgrade the main and then try the hboot fix, you will need some knowlegde of adb commands. Just let me know and I will address you in the right direction. I gotta look for the information first.
Click to expand...
Click to collapse
in fact I had hboot 2.00.0027 ,Android 2.3.5 and sense 3.0
when I want to unlock with htcdev , it suggest me upgrade hboot and give me a link to PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe and I install it
then I had 2.00.0029 hboot
after that I flashed ViperDHD_v2.2.0.zip, but phone stuck at splash screen, I flash stock boot.img via fastboot and again it stuck at splash screen
then I format everything and install DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00.zip but it stuck at splash screen again, during that phone stuck at Splash screen I searched from for s-off because I did my Evo 3D s-off and I cn install every rom and kernel on it
Suddenly I heard htc-boot-sound and phone went into bootanimation and start OS
then I use Easy s-off and it messaged me that my bootloader is corrupred

Its funny because I used this exact tool to s-off my completely stock DHD, I didn't even have radio s-off, does PD98IMG files not work either?
Sent from my Desire HD using Tapatalk 2

ardanai said:
in fact I had hboot 2.00.0027 ,Android 2.3.5 and sense 3.0
when I want to unlock with htcdev , it suggest me upgrade hboot and give me a link to PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe and I install it
then I had 2.00.0029 hboot
after that I flashed ViperDHD_v2.2.0.zip, but phone stuck at splash screen, I flash stock boot.img via fastboot and again it stuck at splash screen
then I format everything and install DHD_WWE_3.12.405.1_STOCK_rooted_by_nitr00.zip but it stuck at splash screen again, during that phone stuck at Splash screen I searched from for s-off because I did my Evo 3D s-off and I cn install every rom and kernel on it
Suddenly I heard htc-boot-sound and phone went into bootanimation and start OS
then I use Easy s-off and it messaged me that my bootloader is corrupred
Click to expand...
Click to collapse
Well, if you have just kept the unlocked bootloader you wouldn't be regreting it now...S-OFF it is not necessary for most of the customization tasks.
It seems that your bootloader was not overwriten but got corrupted before somehow. This is the first time that I see that a 0029 hhboot version is corrupted and your main is even 3.13.x, I guess that you need to do some extra work and that will risk your device in every step you run.
If it is ok with you we can arrange something over teamviewer and I will lend you a hand...do not promise anything thou..

[Official] Android 2.2.2 to Android 2.3.3 upgrade questions.

Hi, I want to upgrade my HTC Desire with android 2.2.2 to 2.3.3 but it is currently rooted.
I will use the official package by HTC "RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe"
I'm able to use the Android Debugging Bridge so do I still need to install HTC Sync for this?
-Revolutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.50.26
Aug 10 2010, 17:52:18
Thanks in advance Jordynl.

JordyNL said:
Hi, I want to upgrade my HTC Desire with android 2.2.2 to 2.3.3 but it is currently rooted.
I will use the official package by HTC "RUU_HTC Desire Android 2.3 Upgrade (Gingerbread).exe"
I'm able to use the Android Debugging Bridge so do I still need to install HTC Sync for this?
-Revolutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.50.26
Aug 10 2010, 17:52:18
Thanks in advance Jordynl.
Click to expand...
Click to collapse
All you need to do is install HTC Sync, and then run the RUU.

abaaaabbbb63 said:
All you need to do is install HTC Sync, and then run the RUU.
Click to expand...
Click to collapse
I successfully installed android 2.3.3 but now I can't seem to access the bootloader anymore (holding volume button down and power button) Did I do something wrong? :S

JordyNL said:
I successfully installed android 2.3.3 but now I can't seem to access the bootloader anymore (holding volume button down and power button) Did I do something wrong? :S
Click to expand...
Click to collapse
You have to disable Fast Boot from power options.

abaaaabbbb63 said:
You have to disable Fast Boot from power options.
Click to expand...
Click to collapse
Alright, Then next problem.
I successfully installed the rom, But now it tends to crash sometimes (when going out of the lock screen) it crashes and volume down, trackball + power won't reboot it.
Anyway to fix this?
Oh and it isn't longer rooted. The bootloader recovery mode gives a red triangle, (holding volume button up and power) brings me to the stock recovery.
What to do. :S

JordyNL said:
Alright, Then next problem.
I successfully installed the rom, But now it tends to crash sometimes (when going out of the lock screen) it crashes and volume down, trackball + power won't reboot it.
Anyway to fix this?
Oh and it isn't longer rooted. The bootloader recovery mode gives a red triangle, (holding volume button up and power) brings me to the stock recovery.
What to do. :S
Click to expand...
Click to collapse
1. To reboot, take the battery out.
2. Use revolutionary to s-off and root.
http://revolutionary.io/

abaaaabbbb63 said:
1. To reboot, take the battery out.
2. Use revolutionary to s-off and root.
http://revolutionary.io/
Click to expand...
Click to collapse
But it is already S-OFF. Yet I don't know why there is the red triangle in the recovery boot.
I can't seem to root it now.
I really appreciate you helping me, I'm a bit confused since I'm very newb with flashing and roms etc. :S

JordyNL said:
But it is already S-OFF. Yet I don't know why there is the red triangle in the recovery boot.
I can't seem to root it now.
I really appreciate you helping me, I'm a bit confused since I'm very newb with flashing and roms etc. :S
Click to expand...
Click to collapse
Still s-off after flashing a RUU? Hm...weird.
Ok then.
http://forum.xda-developers.com/showthread.php?t=1751258
Install 4ext recovery by following this.

abaaaabbbb63 said:
Still s-off after flashing a RUU? Hm...weird.
Ok then.
http://forum.xda-developers.com/showthread.php?t=1751258
Install 4ext recovery by following this.
Click to expand...
Click to collapse
That's just awesome!
Can I just install Superuser-3.0.7-efghi-signjed.zip with this state and recovery system?

JordyNL said:
That's just awesome!
Can I just install Superuser-3.0.7-efghi-signjed.zip with this state and recovery system?
Click to expand...
Click to collapse
Yup.

abaaaabbbb63 said:
Still s-off after flashing a RUU? Hm...weird
Click to expand...
Click to collapse
Just so u know when ur s-off then just run the ruu, u still remain s-off. To go complete stock s-on u need to flash downgrader then ruu and ul be s-on.

abaaaabbbb63 said:
Yup.
Click to expand...
Click to collapse
Fantastic, You don't know how happy I am now with you guys.
You saved my day, if I ever can do something for you just tell me.

jmcclue said:
Just so u know when ur s-off then just run the ruu, u still remain s-off. To go complete stock s-on u need to flash downgrader then ruu and ul be s-on.
Click to expand...
Click to collapse
That explains many things. Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}