Develop Bugs

Flashing new kernel?

Do I need to flash back to stock kernel (evo 4g) before flashing a new one?
Sent from my PC36100 using XDA App

No. Just make a backup, wipe your cache and dalvik, then flash kernel from recovery. Give it like 2-3 before you pass judgement on it.

Thank you!
Sent from my PC36100 using XDA App

No problem man.

teh roxxorz said:
No. Just make a backup, wipe your cache and dalvik, then flash kernel from recovery. Give it like 2-3 before you pass judgement on it.
Click to expand...
Click to collapse
Exactly. Just like he said too, it might take a few minutes after you wipe what's listed above to boot up. If after 5 to 10 minutes its still not working then flash another kernel. Not all evos are the same too, so what works for someone might not work for yours.
Sent from my hand with XDA Premium installed

snowboarda42 said:
Exactly. Just like he said too, it might take a few minutes after you wipe what's listed above to boot up. If after 5 to 10 minutes its still not working then flash another kernel. Not all evos are the same too, so what works for someone might not work for yours.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
Personally, I always flash the kernel after the rom, so its done in 2 recovery sessions. Seems to alleviate the potential problems.

Personally, I always flash the kernel after the rom, so its done in 2 recovery sessions. Seems to alleviate the potential problems.
Click to expand...
Click to collapse
Same here, it lets everything get settled in a bit before swapping the kernel. Although I think he's not changing roms at this time but who knows.
Sent from my hand with XDA Premium installed

snowboarda42 said:
Same here, it lets everything get settled in a bit before swapping the kernel. Although I think he's not changing roms at this time but who knows.
Sent from my hand with XDA Premium installed
Click to expand...
Click to collapse
Ah true, but still good advice to have on deck.

I have always flashed the kernel with the rom too, (after the rom) I am just going with a different kernel and wasn't quite sure if I needed to clean (wipe) everything. Thanks for the help
Sent from my PC36100 using Tapatalk

The ics kernels have arrived

Darkside or streamline....go to the development threads...bln oc uv and more...I'm running Darkside on stock rom and it's insane! Overclocked to 1.78 benchmark 7100...fixes all problems with stock rom
Sent from my SGH-T989 using xda premium

Running DS kernel on stock as well. Sweet performance indeed.
Sent from my SGH-T989 using xda premium

Both of those kernels are not playing well with stock rooted telus roms quite yet so be careful and make sure you have a backup
Sent from my SGH-T989D using XDA

firebane said:
Both of those kernels are not playing well with stock rooted telus roms quite yet so be careful and make sure you have a backup
Sent from my SGH-T989D using XDA
Click to expand...
Click to collapse
Exactly but if you have a tmobile phone, game on...my phone is just as fast as gb but with ics and all it's new features
Sent from my SGH-T989 using xda premium

I hear streamline is still having bugs for aokp...
Sent from my SGH-T989 using xda premium

Great news indeed! I am a complete noob when it comes to flashing kernels, or anything for that matter. I have successfully flashed this kernel on the Tmobilestock ROM. Now things do seem to be a alot smoother, not sure if it is a placebo, but what are some things that I should do to ensure I take advantage of the new kernel?
What system settings should I be aware of, or make changes to ensure maximum performance?
Is this ROM overclocked to 1.75ghz by default? Right now benchmarks are telling me its clocked at 1.566ghz.
Any tips or tricks are appreciated, thanks! :victory::laugh::victory:

ohaiu said:
Great news indeed! I am a complete noob when it comes to flashing kernels, or anything for that matter. I have successfully flashed this kernel on the Tmobilestock ROM. Now things do seem to be a alot smoother, not sure if it is a placebo, but what are some things that I should do to ensure I take advantage of the new kernel?
What system settings should I be aware of, or make changes to ensure maximum performance?
Is this ROM overclocked to 1.75ghz by default? Right now benchmarks are telling me its clocked at 1.566ghz.
Any tips or tricks are appreciated, thanks! :victory::laugh::victory:
Click to expand...
Click to collapse
I would get system tuner..no the Darkside kernel has to be overclocked...it's not by default
Sent from my SGH-T989 using xda premium

Eugene is an android master. I flashed his kernel without even reading about it.
Sent from my SGH-T989 using xda premium

Thanks for the suggestion on CPU Tuner, I will give that app a swirl.
One really weird thing that I have noticed since flashing the kernel on Tmobile stock, is that calls are not working. I cannot hear anything, trying to toggle the speaker results in severe lag that hangs for a few seconds to a minute. Any ideas? I would post directly in the development thread, but I have not met the post count to do so. If someone can move this there, then by all means.
Thanks for any help.

ohaiu said:
Thanks for the suggestion on CPU Tuner, I will give that app a swirl.
One really weird thing that I have noticed since flashing the kernel on Tmobile stock, is that calls are not working. I cannot hear anything, trying to toggle the speaker results in severe lag that hangs for a few seconds to a minute. Any ideas? I would post directly in the development thread, but I have not met the post count to do so. If someone can move this there, then by all means.
Thanks for any help.
Click to expand...
Click to collapse
What rom do you have and what kernel did you flash?
Sent from my SGH-T989 using xda premium

djtheraven said:
What rom do you have and what kernel did you flash?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Hey DJ. I flashed Darkside Venom 3.0.8 on the stock rooted Tmobile ROM. Here's a kicker, phone calls work flawlessly when I switch to WIFI calling...not sure if that helps with troubleshooting.
Thanks

ohaiu said:
Hey DJ. I flashed Darkside Venom 3.0.8 on the stock rooted Tmobile ROM. Here's a kicker, phone calls work flawlessly when I switch to WIFI calling...not sure if that helps with troubleshooting.
Thanks
Click to expand...
Click to collapse
When you upgraded to ics did you do a full wipe? And did you wipe partition and dalvik cache before you installed the kernel?
Sent from my SGH-T989 using xda premium

I did a factory reset and data wipe after having successfully upgraded to ICS. When I flashed to the Dark Side Venom kernel earlier, I wiped Dalvik cache but not the partition.

Streamline #6 on AOKP .40. Nice and smooth thus far.

ohaiu said:
I did a factory reset and data wipe after having successfully upgraded to ICS. When I flashed to the Dark Side Venom kernel earlier, I wiped Dalvik cache but not the partition.
Click to expand...
Click to collapse
Do you have a backup.?..if so then restore and try again wiping both ..it does matter...if not try Darkside cache wipe
Sent from my SGH-T989 using xda premium

Here's my ics rocking lock and home screen
Edit: i guess pics don't work here
Sent from my SGH-T989 using xda premium

zander145 said:
I hear streamline is still having bugs for aokp...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Where did you hear that? The only thing I've heard is the issue with Tellus and the Smartass v2.
Been running with it since this morning and it's been really good. No reboots/boot loops and battery has been solid.

djtheraven said:
Do you have a backup.?..if so then restore and try again wiping both ..it does matter...if not try Darkside cache wipe
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
I do have a backup created using ROM manager. I may give the re-flashing route a try. It seems like another member jbreeze228 in the development thread that is experiencing the exact issue, but it doesn't look his post have been addressed yet. So I'll stay tuned with that.
How does the Darkside Cache Wipe work?

ohaiu said:
I do have a backup created using ROM manager. I may give the re-flashing route a try. It seems like another member jbreeze228 in the development thread that is experiencing the exact issue, but it doesn't look his post have been addressed yet. So I'll stay tuned with that.
How does the Darkside Cache Wipe work?
Click to expand...
Click to collapse
You have to download it your ex sdcard and then flash it and let it do it's thing...
Sent from my SGH-T989 using xda premium

djtheraven said:
You have to download it your ex sdcard and then flash it and let it do it's thing...
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Looks like there is a Super Wipe, and a Cache Wipe. Which of the two should I use?
1. Place on ROOT of your SD card.
2. Boot into Recovery Mode
3. Do a NAND BACKUP!!!
4. Flash DARKSIDE.SUPER.WIPE
5. Stay inside recovery
6. Flash desired ROM.
7. After flashing is complete, Reboot...
8. Done!
So lemme see if I understand the instructions correctly. I should restore to my original backup. Boot into recovery and flash the wipe file. Then while still in recovery, I should flash the kernel? Am I understanding the steps correctly?

[Q] where can I get a stable JB 4.1 for CWM T989!

I have been looking all over and my eyes are about ready to have a critical meltdown.
I have a T-Mo T-989 (Hercules) and have been looking for a JB ROM all night and found some shady threads or ROMs that don't work. I dunno, maybe I've installed something wrong, little help here?
Generally the ones that will install get hung up during the initial boot, wtf? Have run across some that wouldn't even install and would abort.
I should say I am using CWM 5.0.2.6... I think, its been so long since I have done anything to this phone so I forget but I know its ither Odin or CWM (or are they both one in the same? x.x ) I've been using Darkside Evolution ICS ROM all this time and would be nice to move up to JB if there is a stable one out there

Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

iburnhearts said:
Have you tried vincom's cm build? http://forum.xda-developers.com/showthread.php?t=1886009 its very stable. Been using it for 9 days now without a single SOD or RR. To get the best results I recommend using TWRP. Just head over to the play store and download GooManager. Open, grant superuser, hit menu, then click on "install open recovery script". Go through the prompts and it will download and install TWRP. The method I use for flashing was: Darkside superwipe, ROM, gapps. (I did not use the super light gapps because the home button doesn't work when I do and it doesn't auto restore my apps)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Hmm, well I got goo manager and its now stuck on the TWRP's boot screen and just reboots after so long of sitting there :/ and its already deleted the rom, so I guess I have to go through the CWM rooting proceeders again?

Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<

i would say, to use twrp and download the latest cm10 Here.
i recommend twrp for stable flashing cause there's bugs in latest cwm...

PorscheHusky said:
Well I have managed to get CWM5 back on it and got a working ROM for now but it seems when I do the method you imply it flukes and freezes at the TWRP boot screen. I followed ye the best way possible, maybe there is an alternative way?
I have tried installed Vincom's JB all versions and it comes back as error then aborts install or it installs but sits at initial boot for more than 25min and does nothing I've found that while the warning say give it 10min to boot is generally just a 'just in case' scenario since the T989's processors are considerably powerful.
I have tried to get the ROM onto the phone's internal memory and install from there like Vincom said but the computer won't read the phone for some reason >.<
Click to expand...
Click to collapse
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app

John imilitym
bzlik88 said:
Not entirely true. Contrary to what everyone has been saying, and im not trolling just saying from personal experience - cwr 5.0.2.7 and dark side wipes have yet to give me problems I was on the majority if not all jb roms with no issues other than rr/sod which was before the kernel fix.
I'm a noob and expect that 90% of the people here kno more than I do but I wish someone could explain to me why the scripts and cwr 5027 are suddenly so bad.
::
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
CWR 5027 isn't bad at all it's just that using darkside scripts with certain new recoveries has caused some people boot loops and also with the newer recoveries they aren't required since the built in wipe options work just fine.Personally I use the recovery here http://forum.xda-developers.com/showthread.php?t=1844637
and have had zero issues with it plus it has the darkside scripts built in

Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app

arthurgreeeen said:
Galaxy S Bean ROM! 4.1.2 almost everything stable from Camera to Phone Calls
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
+1. You can't go wrong with that Rom! I been running it for over a week now with zero complaints
Sent from my SGH-T989 using xda app-developers app

With the v3 sbean I couldn't get my home button to work when I ask tmo twice he didn't respond to my question. I'm looking at slimbean next we'll see how that goes
Sent from my SGH-T989 using xda app-developers app

I would recommend trying either AOKP OFFICIAL Build 5 (not sure if by time you read this if theres a newer one) or a CM10 Nightly. I've tried tons of different JB roms from 4.1 to 4.1.2 and those work good. Decent battery life without changing too many settings (I'm afraid to change too many things because I've hard bricked my phone before but barely got it replaced under the 20 day full exchange warranty). No random reboots or force closes for me so far. Highly recommend trying them out, very simple to flash.

Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app

duckied said:
Been on the official aokp and its amazingly stable better then anything jb rom I tried on the s2 battery is excellent too
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
And I haven't had anything go majorly wrong with cm10 since the nightlies went official. I'm on the 10/24 nightly right now.
Sent from my A100 using Tapatalk HD

Nice nice... I wanna test out CMX maybe I'll make a nand backup and check it out
Sent from my SGH-T989 using xda app-developers app

LoopDoGG79 said:
Flash this. Its a flashable TWRP 2.3.1.1 zip.
http://db.tt/gu2PDvZI
Restart recovery, your good!! You need the newer recoveries, like TWRP or CWM 6 to flash JB ROMs
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Actually... I have CMW6 now the touch one. Does that have something to do with it? The main issue I have with SBean and CM9's JB is eveyrone complains that they can't hear me, that I sound like a robot and the call is badly broken up or that I'm not speaking up like my mic isn't picking up on my voice very well.
Is this a ROM error or a kernel error? rather annoying frankly @[email protected]

Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium

duckied said:
Go to your phone app then settings and check noise suppression
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
This is a sure fix then? This would make me the happiest Porsche Husky on Earth if I could go back to Sbean
The customization features of it are to die for

Ooooo, wait a tic... I feel like such n00b now...
I kept downloading V1 thinking it was the newest one xD I think the V6 at the way bottom is the newest one. I'll try that for a few days then report back.
Edit: QUESTION - my screen is flickering (just installed SBEAN V6)... is that a bad install or did I have to fix permissions?

That pretty common in most JB rom but it usually goes away after few mins for me. You can go to settings and then developer options then disable hw overlay but you would need to do it on every boot because it won't stick after a reboot.
Btw you should check out official aokp-milestone-1 it not on here but Google aokp and download the one for our phone. Its pretty sick and stable.
Sent from my SGH-T989 using xda premium

[Q] Anything other than a TW and my camera just wont work, Help?

Hi there!
I have had an s3 for a few days now and love it!.
Any TW rom and my camera works just fantastic.
Any cm10/aokp/miui/etc rom and I just cant use the camera no matter what app I use to try it, whether it be the built in app or camera360/etc.
Driving me nuts and would love someone to help me. Anyway research I have done hasnt told me what I'm doing wrong.
I wipe cache/dalvik/factory reset/system before each rom. I have tried different kernels but nothing has helped.
Any gurus out there have any ideas on what I can do to fix this?

Your install process would be and please link the files you are flashing... I'll try and help you. I've seen a few people mention this the past couple days.

The most recent I tried to flash was Illusion v1.1.18 - (d2tmo, d2att & d2vzw) - 1|18|13 from this thread:
http://forum.xda-developers.com/showthread.php?t=2037028
I downloaded Illusion-v1.1.18-d2tmo.zip and gapps-jb-20121212-signed.zip.
I went into recovery which is twrp and the most recent version. I installed it with the goo.im app.
When in recovery I did:
1) Factory Wipe
2) Wipe Cache
3) Wipe Dalvik
4) Wipe System
I would then click Install and select the rom file, and after it succesfully flashed I would then flash the gapps file. All were successful.
I would then reboot and the rom would boot up fine. I setup my google account and all that then for the heck of it I would reboot.
I then would try the camera app and it would complain that it couldnt connect to the camera basically. I went into the play store and tried a free version of camera 360, puddle camera, etc and all would not work.
I went back into recovery, wiped cache and dalvik again, hopped on one foot, faced east, and clicked my heels together. Upon reboot the camera does not work.
I have wiped all that and tried to install [Kernel][JB] Leankernel: Minimalistic Kernel for D2TMO/D2ATT (AOSP) v2.3 [1/17/13] which flashed fine. Upon reboot I could change voltages to undervolt, mess with governors but cameras still do not work.
I have a backup of two TW roms (one stock) and both of the those roms work beautifully with whatever camera I try, including the built in/stock camera.
I hoped I didn't leave out something. If there is something I missed than I'm an idiot because it seems like I am really missing something.
Thanks for your help.

I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery... Are you using the same Gapps over and over on each try? Might wanna try a different set.

mt3g said:
I don't see any reason your steps lead to that, the exact steps I take every time to flash. I'm researching but in the mean time, go to app manager and wipe cache and data from gallery.
Click to expand...
Click to collapse
I did that earlier with no luck.
I just force stopped on gallery, wiped cache/data, rebooted, and I tried the camera only to get the same message.
Thank you for that tip but I will continue my research also.
Just because I looked at about phone.
Model of phone is SGH-T999 (just in case someone thinks I'm in the wrong forum"
Baseband version is T999UVDLJA
Kernel is of course 3.0.59-leanKernel
AOKP Version is Illusion v1.1.18 d2tmo
Build number is aokp-d2tmo-userdebug 4.2.1 (I truncated the rest)

mt3g said:
Are you using the same Gapps over and over on each try? Might wanna try a different set.
Click to expand...
Click to collapse
I have downloaded this gapps twice for the last rom http://goo.im/devs/itsmikeramsay/gapps-jb-20121212-signed.zip.
For the miui rom there was a gapps that was specific to miui and had miui in the name. The miui rom's camera didnt work.
I'll look for a different gapps if that might be the problem but since I have tried a couple roms and a few different gapps I feel that might not be the issue.
I still will give it another try though. Just have to find another gapps to try.

try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use

mt3g said:
try these just in case they're corrupted. http://d-h.st/dtk these are the ones I use
Click to expand...
Click to collapse
I redid the entire install process from scratch using that gapps and the camera is still not working.
Ugh. Thanks for the link.
WIll keep trying :/

run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!? Shots in the dark right now, just trying to help as I've never seen this issue before solved.

mt3g said:
run a log cat and post it. Other then that maybe bad firmware...
did you update your phone to stock JellyBean via Over the Air or Odin? it updates the partitions which could be the issue, mmayyybbeee???!?!?
Click to expand...
Click to collapse
It had JB on it when I got it almost 2 days ago. I tried to do an OTA when I got it but it said I was up to date.
Let me do a restore to stock and see what version it is.
Edit: Restored stock. Says android version 4.1.1, Kernel 3.0.31-370274se.infra, Build number JR003L.T999UVDLJA

Was it already rooted?
Sent from my SGH-T999 using xda premium

mt3g said:
Was it already rooted?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It was new, out of the box. I watched the guy unrap it. It is one of the newer grey metal color looking ones. It was not rooted. I did that. Should I do an Odin to bring the device back to complete stock and start from scratch?
Will take a while since I have no idea where to start with all that

Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium

mt3g said:
Thats the best suggestion I have. Maybe someone else will step in with an idea.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
You have been helpful. In a bit ill reflash a cm/aokp rom and logcat it.

This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium

mt3g said:
This is happening a couple of threads above you haha http://forum.xda-developers.com/showthread.php?p=36899130
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though

dccoh said:
Hey thanks again for your help. I ended up falling asleep but installed Wicked V6 (tw based rom) and liking it enough that I will wait on a aokp/cm10.x rom until I get up the motivation to try again.
I'm sure I'll get an itch for a different rom in about a week though
Click to expand...
Click to collapse
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium

mt3g said:
All good, just hope the thread I pointed to will work out once you do want to give it another go.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.

dccoh said:
I backed up Wicked and loaded up my original rom that I wanted to try.
The fix in the said thread fixed me right up, camera works fine.
All this trouble because of one 350ish kb file
Thanks for checking on my issue.
Click to expand...
Click to collapse
Most definitely sir. I don't understand why that file was getting screwed over. Glad it all got worked out for you.
Sent from my SGH-T999 using xda premium

CyanogenModCM 10.1 Nightly and AOKP Feb 18 Build?

Hey guys between this two builds i want to know what's the difference?? Cause i really don't see it. Maybe some tweaks or settings?
Can you guys explain to me which one is better and why?

daworship said:
Hey guys between this two builds i want to know what's the difference?? Cause i really don't see it. Maybe some tweaks or settings?
Can you guys explain to me which one is better and why?
Click to expand...
Click to collapse
Whichever one works better for you. There are different customizations for each ROM, but it's up to you to decide which one works better for your needs.
Sent from my Samsung SGH-T989D using xda premium

I keep getting stuck in a boot loop with all the updates of 10.1 Nightly, the only one I didn't get looped in was the original. I even did a full wipe and everything, help anyone?

kvarug01 said:
I keep getting stuck in a boot loop with all the updates of 10.1 Nightly, the only one I didn't get looped in was the original. I even did a full wipe and everything, help anyone?
Click to expand...
Click to collapse
I never have that issue even with dirty flash. Have you tried to wipe system, data, everything? I think you can try to Odin back to stock, then root it and start everything fresh. Sometimes the old files are still left over and mess up your phone.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Alarmmy said:
I never have that issue even with dirty flash. Have you tried to wipe system, data, everything? I think you can try to Odin back to stock, then root it and start everything fresh. Sometimes the old files are still left over and mess up your phone.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
The sad thing is, that's all I've been doing. Using Odin and keep going back to stock, update to ICS with Kies, and then hope to try and run another version of the ROM, and still no luck. It's quite frustrating. And yeah, I wiped system, data, everything. Did a full on wipe.

Also, has anyone have been getting call issues? Like you sound muzzled to your callers?

kvarug01 said:
Also, has anyone have been getting call issues? Like you sound muzzled to your callers?
Click to expand...
Click to collapse
Here is solution for your issue:
1. Upgrade recovery, or switch to TWRP.
2. Clean flash rom again.
3. Flash the newest radio UVLI4, or LI1.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Download darkside super wipe.zip ...flash it and then flash your rom+gapps... Hit thanks
Sent from my SGH-I897 using xda premium

sam.balia1012 said:
Download darkside super wipe.zip ...flash it and then flash your rom+gapps... Hit thanks
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
DO NOT do that if you are on the latest TWRP or CWM 6.+ cause Darkside super wipe was discontinued. For AOKP and CM 10.1 Nightly I just did a data/partition wipe and flash gapps.