Hey everybody i have a xperia pro mk16-a- with bootlader blocked and rooted.....i tried to install this room (Jellysandwich) and when i did that, my cell died
i followed the instructions on the post to install it but it didn't works
i also try to install by the second metod that says that restore the original firmware excluding kernel, i rooted the phone again and try this second way and again it died
what can i do to install this room??, i have few options by the bootloader blocked.......
somebody has installed this rom on mk16-a-??
doest it works on mk16-i-??
.......................one suposition....i thing it can works on mk16i but relly i don't know...... any suggestions?:fingers-crossed:
answers are welcome!!:silly:
kikisx10 said:
Hey everybody i have a xperia pro mk16-a- with bootlader blocked and rooted.....i tried to install this room (Jellysandwich) and when i did that, my cell died
i followed the instructions on the post to install it but it didn't works
i also try to install by the second metod that says that restore the original firmware excluding kernel, i rooted the phone again and try this second way and again it died
what can i do to install this room??, i have few options by the bootloader blocked.......
somebody has installed this rom on mk16-a-??
doest it works on mk16-i-??
.......................one suposition....i thing it can works on mk16i but relly i don't know...... any suggestions?:fingers-crossed:
answers are welcome!!:silly:
Click to expand...
Click to collapse
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.
jman2131 said:
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install Jelly sandwich from sd card without rebooting
see if this works.
Click to expand...
Click to collapse
hey with the new 7.2.1 it works!! thanks!!
kikisx10 said:
hey with the new 7.2.1 it works!! thanks!!
Click to expand...
Click to collapse
you're welcome
I'm about to install PARANOIDANDROID http://forum.xda-developers.com/showthread.php?t=1818199&highlight=i747 to my samsung galaxy s3 (i747) but i'm not sure where I should place the downloaded rom and GAPPS zip files?
From my understanding, I need to follow these steps but if I wipe cache, delvik, data factory reset, and format system.. wouldn't that delete the rom file and gapps and then wouldn't know how to get them back to the phone..
1- Download ROM and Gapps to internal sd card
2- Boot phone into recovery
3- WIPE Cache/Delvik/Data factory reset> Mounts and Storage- format system
4- Flash ROM and Gapps
5- Let phone boot, set up google Play and reboot phone (To be done right, this whole process should take 10 - 15 minutes)
Nope, if you follow the instructions you should be fine.
DarthDerron said:
Nope, if you follow the instructions you should be fine.
Click to expand...
Click to collapse
Well, I simply downloaded the files from my computer and was going to transfer them to my phone via the micro usb cable..
Is it safe to place them in phone -> clockworkmod folder then follow the steps I posted above?
Thank you
promidgetmafia said:
Well, I simply downloaded the files from my computer and was going to transfer them to my phone via the micro usb cable..
Is it safe to place them in phone -> clockworkmod folder then follow the steps I posted above?
Thank you
Click to expand...
Click to collapse
Just put it in the root directory of your internal, it doesn't really matter where you put it though.... with CWM you can navigate through folders.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
promidgetmafia said:
I'm about to install PARANOIDANDROID http://forum.xda-developers.com/showthread.php?t=1818199&highlight=i747 to my samsung galaxy s3 (i747) but i'm not sure where I should place the downloaded rom and GAPPS zip files?
From my understanding, I need to follow these steps but if I wipe cache, delvik, data factory reset, and format system.. wouldn't that delete the rom file and gapps and then wouldn't know how to get them back to the phone..
1- Download ROM and Gapps to internal sd card
2- Boot phone into recovery
3- WIPE Cache/Delvik/Data factory reset> Mounts and Storage- format system
4- Flash ROM and Gapps
5- Let phone boot, set up google Play and reboot phone (To be done right, this whole process should take 10 - 15 minutes)
Click to expand...
Click to collapse
Use goomanager to download the roms and latest gapps.
Sent from my SAMSUNG-SGH-I747 using xda premium
http://forum.xda-developers.com/showthread.php?t=2136444.
I'm gonna flashing this RoM.do I need to format data /format cache and others format list in CWM.or just format system only.
y u no read OP???
itasoulas said:
==================================
PitchBlack Installation Procedures
==================================
Installing PitchBlack For The First Time
wipe cache / dalvik / factory reset / format system
flash rom & reboot
complete setup & press home key
done
Installing PitchBlack Updates
wipe cache / dalvik
flash rom & reboot
done
Click to expand...
Click to collapse
Flashed done
Sent from my Galaxy Nexus using xda app-developers app
Is there any chance of flashing a new rom without sd card?
Mohanadmohamedd said:
Is there any chance of flashing a new rom without sd card?
Click to expand...
Click to collapse
I wanna know how to install a custom rom rar in my cellphone...
Mohanadmohamedd said:
Is there any chance of flashing a new rom without sd card?
Click to expand...
Click to collapse
move zip file to your mob via usb
you should have any recovery installed like cwm ... reboot you mob to recovery
1) wipe data / factory reset >> yes
2) wipe cashe >> yes
3) advanced > wipe dalvik cashe >> yes
4) back
5) install zip
6) choose zip from SD Card >> ( choose your rom ( zip file ) ) >> yes
7) wait while flashing ( in rom have aroma choose your optians in aroma )
8) back
9) Reboot system now
befor installing zip .. you can enter advanced and format data , format cashe .. if you want and your personal data will be safe like pics , music etc...
and you should do backup cuz if any thing wrong
do this on your risk
sorry for my bad english
if i helped u .. press thanks
---------- Post added at 07:15 PM ---------- Previous post was at 07:06 PM ----------
Mohanadmohamedd said:
Is there any chance of flashing a new rom without sd card?
Click to expand...
Click to collapse
custom roms usualy is a zip file .. so to flash it you should have any recovery like CWM .. so you have to put ur rom in your sd card ,, using usb
the rom that's flashing from PC is a stock rom via flashtool if you have sony device
sry for my bad english
if i helped u .. press thanks
thanks a lot!!!!
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI.
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut.
Install instructions:
1.With fastboot:
Extract philz_touch_*.*.*_armani.img from philz_touch_*.*.*_armani.img.tar
Run fastboot
Code:
fasboot flash recovery philz_touch_*.*.*_armani.img
2.With MiRecovery using flashable zip:
Copy philz_touch_*.*.*_armani.zip in root of internal storage
Rename it to update.zip.
Enter into recovery (volume up + power)
Install update.zip from sdcard.
Reboot.
3.With CWM or TWRP using flashable zip:
Copy philz_touch_*.*.*_armani.zip in root of external sd card
Enter into recovery (volume up + power)
Install zip from sdcard.
Reboot.
Known Issues:
Mount USB Storage don't work.
XDA:DevDB Information
[RECOVERY][ARMANI][RedMi 1S]CWM PhilZ Touch, Tool/Utility for the XIAOMI REDMI 1S
Contributors
juliusssss,Phil3759
Version Information
Status: Stable
Created 2014-08-12
Last Updated 2014-08-12
thank you juliuss, really really awesome work. and phil too. I have been using your TWRP but this is the best. great work.
Thanks... will try it out and give feedback.
Amazing work , used this to install the unofficial CM11 build on my Redmi 1S !!
I am unable to flash zip file with mi recovery. It always gives error no zip found in internal storage.please rename file as update zip and try again. I have already renamed file as update.zip after downloading it.I have zip file in internal storage and external as well. Can anyone help me out?
juliusssss said:
Main thread + features + install instructions + dev support
Click to expand...
Click to collapse
any chance of making Dual Recovery ??
like this 1 that i am using on Xperia Z1
http://forum.xda-developers.com/showthread.php?t=2261606
@juliusssss....Bro just fixed the sdcard mount problem
now sdcard is mounting in recovery mod...
Here is The Link...
Philz Touch
khan_frd2002 said:
@juliusssss....Bro just fixed the sdcard mount problem
now sdcard is mounting in recovery mod...
Here is The Link...
Philz Touch
Click to expand...
Click to collapse
Thanks @khan_frd2002, but it has the same problem, you can mount but only on read-only mode.
Thanks anyway. Greetings.
juliusssss said:
Thanks @khan_frd2002, but it has the same problem, you can mount but only on read-only mode.
Thanks anyway. Greetings.
Click to expand...
Click to collapse
really sorry bro...i just check whether it mount or not
@juliusssss....any new update bro
khan_frd2002 said:
@juliusssss....any new update bro
Click to expand...
Click to collapse
Sorry, now i'm trying to compile a custom recovery for a new device and i don't have time, when i compile this new recovery i update cmw-philz for armani :good::good:
Greetings.
juliusssss said:
Sorry, now i'm trying to compile a custom recovery for a new device and i don't have time, when i compile this new recovery i update cmw-philz for armani :good::good:
Greetings.
Click to expand...
Click to collapse
no problem bro :good:...will wait for you
just one question there is option for wipe to install new rom it will wipe as well sd-card?
sorry for my english
erouz said:
just one question there is option for wipe to install new rom it will wipe as well sd-card?
sorry for my english
Click to expand...
Click to collapse
yes..it will wipe your internal sd-card
ok I know now I was use that option while waiting for reply. I was stuck on mi logo after flash because i was flash rom and speed tweak at one go
but thank you for replay
wats the key combination too boot into this ??
sherry_94 said:
wats the key combination too boot into this ??
Click to expand...
Click to collapse
Volume up + Power key
Sent from my HM 1SW using XDA Premium 4 mobile app
khan_frd2002 said:
yes..it will wipe your internal sd-card
Click to expand...
Click to collapse
U sure selecting the wipe to install new ROM will wipe the internal storage ? Asking as it does not wipe the internal on other phones just formats the system wipes del and cache.
rkkaranrk said:
U sure selecting the wipe to install new ROM will wipe the internal storage ? Asking as it does not wipe the internal on other phones just formats the system wipes del and cache.
Click to expand...
Click to collapse
Yeah. Even I thought it wipes just system and cache
nishanthhh said:
Yeah. Even I thought it wipes just system and cache
Click to expand...
Click to collapse
Thats the reason i asked him coz it does not wipe the internal memory on other phones.