Unofficial CM-11 for the Optimus G
Just some unofficial builds to hold everyone over until the official hits for our device. Used Chadouming's 4.4 repos for the build.
*NOTE*
You MUST be running a recovery from this site to install properly: http://ribs.bbqdroid.org/recoveries
First off, I built off of the work of others and would like to thank:
Code:
Team Codefire for [URL="http://forum.xda-developers.com/showthread.php?t=2007961"]unlocking the bootloader[/URL] and allowing roms at all
CM for their source
TeamPlaceHolder: xboxfanj, houstonn, chadouming
Anyone else I'm forgetting, let me know.
Please thank them, this ROM is only up because of them. Better yet, buy them a coffee!
Not Working:
Code:
Not Sure... let me know
Features:
Code:
Rooted
Built with Linaro/Sabermod toolchains
Built with Chadouming's 4.4 repos
Installation:
As you've read many times over on this site... I am not responsible..blah blah blah... flash at your own risk!
Code:
Like most other roms, boot into recovery and...
1. Factory Reset (Wipe Data/Cache)
2. Wipe System
3. Install Rom
4. Install Gapps
5. Reboot....
Downloads:
Code:
[URL="https://www.mediafire.com/folder/v0aa29gc0qop1/cm"]Rom[/URL]
[URL="http://www.androidfilehost.com/?a=show&w=files&flid=9199"]Gapps[/URL]
Enjoy! If you like my work press the Thanks, or buy me a coffee
My Github
CM Github
mine for something maybe
Awesome work downloading now Thanks
Sent from my Optimus G using xda premium
---------- Post added at 06:16 AM ---------- Previous post was at 05:30 AM ----------
My CPU won't go below 1050 and gpu is at 200 it says in performance settings % that I have been at 1050 most of the time
Sent from my Optimus G using xda premium
I am soft bricked after running antutu. I don't recommend running it.
[Edit] kdz'd back to jb and I'm good to go
Thumbs up on this ROM! I'll definitely be testing this out for the next couple of days.
Does anyone know Houstonn's screen setting in his RootBox ROM offhand? I like his color settings.
Sent from my Optimus G using Tapatalk 2
lunde20b said:
I am soft bricked after running antutu. I don't recommend running it.
[Edit] kdz'd back to jb and I'm good to go
Click to expand...
Click to collapse
Damn, sorry about that.... Thanks for the heads up though, I'll update the op with this info until its fixed.
@Haze028
This rom is amazing. I did get the green demigod kernel panic screen on first boot. I replaced the kernel with the boot.img from Houstonn's 4/2/2013 modded Rootbox, and ran it for about 6 hours without a kernel panic. I did the same thing with your AOKP, and have not seen one kernel panic in 4 days, and can run benchmarks just fine. I am back to running this set up for now due to the rotation issue in Liquid, but once this is fixed I will be back.
Also, I did want to report that Torch is not working on Liquid. This is after a fullwipe. I fixed this by swapping the Torch.apk from Rootbox in the zip and reflashing. I tried copying it to System/App while running the rom, but it would not install, it would just delete Torch all together. I had to add it to your zip before flashing for it to work.
Again, thank you for this amazing rom.
It looks so good,thanks.
arcardinal said:
@Haze028
This rom is amazing. I did get the green demigod kernel panic screen on first boot. I replaced the kernel with the boot.img from Houstonn's 4/2/2013 modded Rootbox, and ran it for about 6 hours without a kernel panic. I did the same thing with your AOKP, and have not seen one kernel panic in 4 days, and can run benchmarks just fine. I am back to running this set up for now due to the rotation issue in Liquid, but once this is fixed I will be back.
Also, I did want to report that Torch is not working on Liquid. This is after a fullwipe. I fixed this by swapping the Torch.apk from Rootbox in the zip and reflashing. I tried copying it to System/App while running the rom, but it would not install, it would just delete Torch all together. I had to add it to your zip before flashing for it to work.
Again, thank you for this amazing rom.
Click to expand...
Click to collapse
I haven't yet had a kernel panic, 11 hours in now. Though I had one case, about 3 hours ago, where the screen would not wake up and I had to power it down and reboot. It has been fine since then.
I can confirm the lack of torch, I'll add that to the OP as well untill I get it resolved. I'll try to work on some things tonight and see about getting another build out soon.
Thanks for the info though, I'll see what I can do.
Haze028 said:
I haven't yet had a kernel panic, 11 hours in now. Though I had one case, about 3 hours ago, where the screen would not wake up and I had to power it down and reboot. It has been fine since then.
I can confirm the lack of torch, I'll add that to the OP as well untill I get it resolved. I'll try to work on some things tonight and see about getting another build out soon.
Thanks for the info though, I'll see what I can do.
Click to expand...
Click to collapse
No, again thank you for the amazing rom and support. I was literally looking in the Nexus 4 section at all the ROMs. Specifically, Liquid, hoping someone would port it. I clicked back to the Canadian Development forum, and bam, there it was. Its like you read my mind.
Haze028 said:
I haven't yet had a kernel panic, 11 hours in now. Though I had one case, about 3 hours ago, where the screen would not wake up and I had to power it down and reboot. It has been fine since then.
I can confirm the lack of torch, I'll add that to the OP as well untill I get it resolved. I'll try to work on some things tonight and see about getting another build out soon.
Thanks for the info though, I'll see what I can do.
Click to expand...
Click to collapse
thank you for your support. This rom works well but I feel that the battery is not very good. Hope u can improve it in the next version. Thanks so much.
I installed this ROM before bed and went to sleep for 8 hours. It didn't seem to want to deep sleep...
Sent from my Optimus G using Tapatalk 2
No deep sleep for me either aslo doesnt go into landscape mode other than that smooth as can be
Sent from my Optimus G using xda app-developers app
galeonui9590 said:
thank you for your support. This rom works well but I feel that the battery is not very good. Hope u can improve it in the next version. Thanks so much.
Click to expand...
Click to collapse
What seems to be eating the battery, as far as battery screen shows, I know NFC defaults on which can kill off the battery quick. If you continue to run it, let me know how battery is once it settles in a bit more
arcardinal said:
No, again thank you for the amazing rom and support. I was literally looking in the Nexus 4 section at all the ROMs. Specifically, Liquid, hoping someone would port it. I clicked back to the Canadian Development forum, and bam, there it was. Its like you read my mind.
Click to expand...
Click to collapse
This was the rom I had initially wanted to build, but after many issues I went to aokp and had much better success. Now that I have slightly more experince building roms, emphasis on the slightly , I managed to get by the errors, though the results are not yet perfect.
mgebara said:
I installed this ROM before bed and went to sleep for 8 hours. It didn't seem to want to deep sleep...
Sent from my Optimus G using Tapatalk 2
Click to expand...
Click to collapse
Out of curriosity which govenor are you using? I switch to intellidemand and clock down to 1.5ghz max, just looked at my time in state and deep sleep is at 83%
Dsmforlife92 said:
[/COLOR]My CPU won't go below 1050 and gpu is at 200 it says in performance settings % that I have been at 1050 most of the time
Sent from my Optimus G using xda premium
Click to expand...
Click to collapse
I've noticed not being able to drop below 1050 as well, seems the same in aokp. I'll look into there being a config or something for the kernel to change this. same for the gpu overclock, i'll update when I find out more
Haze028 said:
Out of curriosity which govenor are you using? I switch to intellidemand and clock down to 1.5ghz max, just looked at my time in state and deep sleep is at 83%
Click to expand...
Click to collapse
I'll give that a try thanks Haze.
Sent from my Optimus G using Tapatalk 2
Awesome Rom, Thanks for the port!
I have one problem though, when I flip my phone in landscape, the image does flip too, but it becomes very small. It stays in portrait, but its rotated by 90 degrees. Any thoughts on that?
deadbeatcocoa said:
Awesome Rom, Thanks for the port!
I have one problem though, when I flip my phone in landscape, the image does flip too, but it becomes very small. It stays in portrait, but its rotated by 90 degrees. Any thoughts on that?
Click to expand...
Click to collapse
The rotation issue is a known issue - haze is working on it for the next builds
Sent from my LG-E973 using xda premium
Haze028 said:
What seems to be eating the battery, as far as battery screen shows, I know NFC defaults on which can kill off the battery quick. If you continue to run it, let me know how battery is once it settles in a bit more
This was the rom I had initially wanted to build, but after many issues I went to aokp and had much better success. Now that I have slightly more experince building roms, emphasis on the slightly , I managed to get by the errors, though the results are not yet perfect.
Click to expand...
Click to collapse
Well, as you know, I can't turn the NFC off. One more thing is that when I used wifi to connect to the Internet, every thing is ok, but when I use 3G+ to surf the Internet, I found that battery indicator reduced very quickly( quicker than normal even it declined 2-3% in a few times).
And in Performance, I set CPU at min: 384 and max:810 but when I checked, I saw that CPU still run at 1026(I already checked "set on boot"). I don't know if it it an error or not.
galeonui9590 said:
Well, as you know, I can't turn the NFC off. One more thing is that when I used wifi to connect to the Internet, every thing is ok, but when I use 3G+ to surf the Internet, I found that battery indicator reduced very quickly( quicker than normal even it declined 2-3% in a few times).
And in Performance, I set CPU at min: 384 and max:810 but when I checked, I saw that CPU still run at 1026(I already checked "set on boot"). I don't know if it it an error or not.
Click to expand...
Click to collapse
You should be able to turn off NFC, if it is sitting greyed out when you unchecked it reboot and try again... Works fine for me.
The frequency thing is known.... I've noticed however using fauxclock it stays down at 384 or whatever it is. Fauxclock is a paid app though so i cant include it. Ill look into an alternate app to use which works better and update when i find it
Edit: as for the internet, I haven't noticed yet...switched back to AOKP, testing the linaro tool chain build. Liquid still is full of issues..... Had trouble building, pretty much hack jobed it through as I didn't have too much time to play.
Related
I need some tester to find bug (problem) with AOKP rom, right now everything seem to work as it should.
This is the last AOKP rom i compile for P930, overclock to 1728 mhz you can change voltage table with init.d script
You can change GPU freq. from system/init.d/10GPUoverclock file
You can use System Tuner app to change CPU freq. and Voltage in real time.
AwesomeBEATSv3 include in the rom
Add Crimson Cobalt theme.
aokp_p930_milestone-6-V2.zip
Plz clear data,cache,dalvik before installing and flash gapps after.
I'm currently backing up my setup on Full Throttle and flashing this; I'm glad to test. Your v6 Full Throttle is really stable by the way. It was initially giving me some force closes, but it seems to have settled in over the course of a few days. I've been meaning to try out AOKP and this looks like a great point to jump in, so I'll give feedback after I've played with this for a bit
---------- Post added at 09:52 PM ---------- Previous post was at 09:46 PM ----------
Okay, so very first impression...this takes a long time on first boot. Don't get antsy, people lol.
---------- Post added at 10:29 PM ---------- Previous post was at 09:52 PM ----------
Second impression...this rom is very smooth. I'm currently fattening 'er up with all my Titanium backups. We'll see how that goes lol. This is truly great, I really like all the customizations AOKP provides.
I'm about to install this rom.. Quick question.. When I install a new rom is it a bad idea to use TB to restore the 'system data'? Thanks!
EDIT: First impression- LOVE IT
Very smooth, no force closes or anything of that nature.
Sent from my LG-P930 using xda premium
Yeah, I would not try to restore system data. The layout is almost certainly different enough to cause problems.
i can never let my buddies see this ROM boot-up or i will never hear the end of it.
running like a pissed-off pink unicorn.
You can disable the bootanimation in the Rom Settings. I think it's pretty easy to replace it in this rom, too, but I haven't gotten to that yet lol. I must say, this ROM feels just as stable as CM9.
The pink unicorn is the best next to the flying pop tart cat in gummy...lol
Sent from my SGH-I727 using xda app-developers app
Can anyone report back comparing the smoothness of the UI compared to v6 full throttle. v6 is the smoothest rom I have used yet.
Dave,
HO!NO!,
it all worked very well on mine, no issues. I don't intend to run this one though, just figured i'd temp install it and see if can help with any issues but there were none.
Hm... Anyone know what the 'swqgger' toggle does?
Sent from my LG-P930 using xda premium
swagger toggle is a gimmick/joke and has no functionality. i looked into it when i was running andasa's aokp build a few months ago.
This is going to sound really strange, but this is the best rom I've used in months. Finally, I am getting decent standby battery use again. My phone only used 6% battery overnight. The official CM9, Full Throttle, and ICS leak have been dying in less than 10 hours for me with like 2 hours of screen on time.
Sent from my LG-P930 using Tapatalk 2
So there are no bugs as of now? I'm going to check it out tomorrow
Sent from my Gameboy Color
The only major bug I've found is that the capacitive buttons don't light up for me. I might have something misconfigured, but if so, I can't figure out how to turn them on. I'm going to be sticking with this rom unless something better (newer version?) comes along before JellyBean
Malnilion said:
The only major bug I've found is that the capacitive buttons don't light up for me. I might have something misconfigured, but if so, I can't figure out how to turn them on. I'm going to be sticking with this rom unless something better (newer version?) comes along before JellyBean
Click to expand...
Click to collapse
Check in settings>display>automatic backlight> tick use custom, then go to edit other levels and check the buttons section. If they're at zero, set them to 225 to restore buttons. You have to set ALL to 225.
Did you get it working on this rom? I did what you suggested and it didn't turn on the lights. I've always been able to get it working in CM9. I'm guessing it's possible HO!NO! missed some liblights patches from CM9 or something. I'd like them to work, but I'm really not too horribly concerned, I know where the buttons are by feel anyway.
Malnilion said:
Did you get it working on this rom? I did what you suggested and it didn't turn on the lights. I've always been able to get it working in CM9. I'm guessing it's possible HO!NO! missed some liblights patches from CM9 or something. I'd like them to work, but I'm really not too horribly concerned, I know where the buttons are by feel anyway.
Click to expand...
Click to collapse
Did you save? I forget that a lot so just asking.
Yeah, I did, it's just not working.
Sent from my LG-P930 using Tapatalk 2
Malnilion said:
Yeah, I did, it's just not working.
Sent from my LG-P930 using Tapatalk 2
Click to expand...
Click to collapse
Welp, I haven't got it working either.
nice rom, very fast. however usb connectivity isnt working for me..... is this happening to anyone else?
(Very) Unofficial CyanogenMod 10 for the HTC Incredible 2
Download Links:
ROM:
GApps:
Kernel:
Directions:
Flash ROM
Flash v14 kernel (NOT optional)
Flash GApps
...
Profit?
What's Broken:
Youtube will reboot your phone after a few seconds... Think this works now.
Front facing camera
Probably lots of other stuff.
Changelog
TODO
Will post later...
See
Screenshots
TODO
Will post later...
See
Yay!
Love it!
Thanks for posting this over here.
...and first (sort of) for the first time. Feels like the very first time.
<3. Thanks
awesome stuff man!!!
Thanks, trying it out now.
Question, is it possible we can get a tweak that will allow us to just tap the search button to get the ICS/JB multitask instead of long pressing the home button. I know it could be done in the ICS roms, it was pretty useful.
I was thinking does anyone think we should all get together as a community and compile a list of what's broken? So then Evan can just copy and paste in the OP (Since I know he's busy ). I noticed with the last thread there was a lot of people reporting the same thing. Maybe if it was in the OP it'd save from the clutter. Plus once there's a list things can get crossed out and people will now what changed from version to version. ?
well done sir :good:
7/30 rom is running amazing with v12, excellent job as always!
Drools :L
Sent from my Galaxy Nexus
The newest build is running really smooth. youtube still reboots the phone....
What's the best governor to use here?
jewnersey said:
What's the best governor to use here?
Click to expand...
Click to collapse
I am on the 10.5 still and I like bfs
Oh man, so excited, I'm going to stay on you're ICS rom a bit longer though, thanks for making jellybean aero!
Will probably flash later today, I know the curiosity will kill the cat. :good:
YEY
Anyone have any input as to how this stacks up against the N7 CM10 Rom? I'm running that one now and love it, but I'll definitely be giving this one a try also. Kudos to Aeroevan for all the hard work!
jewnersey said:
What's the best governor to use here?
Click to expand...
Click to collapse
I have mine set to the lagfree on 1.3ghz and uv'd to -50 across the board. Gonna see how batterylife works out within the next day or so an if it's not too good I'll switch the gov to smartassV2 but leave everything else the same.
TheAtheistReverend said:
I am on the 10.5 still and I like bfs
Click to expand...
Click to collapse
I think he was referring to the governor settings not the kernel
You should try the v12, it's running pretty great on the 7/30
Kernel for HTC Unlocked
Can us sorry soles that have unlocked our phones from HTC get the IMG version of the Kernel too?
Thanks for everything. Great job.
dankblaze said:
I have mine set to the lagfree on 1.3ghz and uv'd to -50 across the board. Gonna see how batterylife works out within the next day or so an if it's not too good I'll switch the gov to smartassV2 but leave everything else the same.
I think he was referring to the governor settings not the kernel
You should try the v12, it's running pretty great on the 7/30
Click to expand...
Click to collapse
morrisdan said:
Can us sorry soles that have unlocked our phones from HTC get the IMG version of the Kernel too?
Thanks for everything. Great job.
Click to expand...
Click to collapse
I guess I could, but I would really suggest relocking and getting real s-off
Sent from my Nexus 7 using xda app-developers app
WildKernel
for T-Mobile Samsung Galaxy S II
Go check out Tame! It goes great with this and it handles OTA updates for this kernel.
This is a Linux based (3.0.101) Kernel which is maintained by me kept inline with the Cyangenmod Kernel so this is compatible with ALL the latest KitKat Roms (unless otherwise stated in the ROM).
Please report anything good and bad so that I know what to keep and what not to keep for the next release. This also helps me push out fixes faster when presented with lots of information (such as logs etc.).
Please see changelogs for an in-depth look at features. Also take a look at the screenshots for a sneak peek.
Feeling like a critic? Leave a review!
Link broken? Try one of the mirrors, Still a no go? Goto my signature and click the file backups link, then navigate to what you were looking for.
v013: AFH
TRU Mirrors: #1 / #2
All Releases: AFH | TRU Mirrors
[#WildKernel-Celox-CL]
[/HIDE]
Thanks:
TeamChopsticks & CyanogenMod
TeamSXL
Cl3Kener
Team Hydra
TeamDS
faux123
Sultanxda
Tamcore
cretin45
showp1984
RomanBB
and any others I may have missed
Info on Governors/Schedulers
You may find my source hosted @ Github
There is NO need to clear caches, kernel installer handles everything. Just flash and reboot.
My recommended Governor/Scheduler setups:
Battery w/ Good Performance at 96-1350mhz:
Intellidemand/SIO (personal choice)
Lazy/SIO
Badass/SIO
Ondemand/SIO
Wheatley/SIO
'lil more Performance at 96-1512mhz:
Smartass/SIO
Hyper/Deadline
Samsung/Deadlne
lulzactive/Deadline
Savagedzed/Deadline
Best Performance (worst battery): 384-???mhz
Gaming/Deadline
Performance/Deadline
Did you read the announcement? (page header)
XDA:DevDB Information
WildKernel for the T-Mobile Galaxy S II (hercules), Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Emmanuel U
Source Code: https://github.com/EmmanuelU/wild_kernel_samsung_msm8660/tree/android-msm-hercules-3.0
Kernel Special Features: Too many features to list, just install it.... now.
Version Information
Status: Stable
Current Stable Version: 013
Stable Release Date: 2015-01-29
Created 2014-05-28
Last Updated 2015-02-01
Wow I'm glad I was up late tonight! Downloaded this installed... Working cam 100% plus we can overclock again! Ole herc still running strong!! Thanks for this!!!
Thanks bro for doing this. I will flash and report
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 08:36 AM ---------- Previous post was at 08:31 AM ----------
Emmanuel, do you recommend CPU tuner or trickster or just stock performance to tweak settings?
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Just flashed it on Carbon 5/21. Initial thoughts are that it seems to get to the boot animation quicker than Uber. But initial reboot is long... I thought my phone was stuck in a bootloop... Also does not kill vibration after subsequent reboots after the initial reboot after flashing the kernel. It's just as quick as Uber and seems to work with Kernel Tweaker. This kernel also won't crash the phone playing 1080p in portrait... Love the fact that this kernel has sleep2wake as well. Will report back after using it for the day...
Any chance of a 2ghz version? And does this work with PAC outta the box?
Edit: Forgot to say thanks for giving us another kernel for the good ol' Herc. So, thanks.
Sent from my SPH-D710 using Tapatalk 2
Not sure if its kernel related but after rebooting my phone because of play store issues. After rebooting, I lost all of my widgets that I placed on 4 screens.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Emmanuel U said:
WildKernel
for T-Mobile Samsung Galaxy S II
This is a Linux based (3.0.101) Kernel which is maintained by me kept inline with the Cyangenmod Kernel so this is compatible with ALL the latest KitKat Roms.
Please report anything good and bad so that I know what to keep and what not to keep for the next release. This also helps me push out fixes faster when presented with lots of information (such as logs etc.).
Please wipe cache and dalvik cache to avoid any possible issues.
Please see changelogs for an in-depth look at features. Also take a look at the screenshots for a sneak peek.
Download Latest WildKernel for Android 4.4+
Mirror (HTTP) / (FTP)
View all public kernel releases (Mirror)
Changelog:
Code:
[B]May 27, 2014 - ver001[/B]
1. Initial Release (based off Diablo 3.1 & Merged with all latest CM vidc changes to fix camera/camcorder issues)
2. [B]Voltage Table Overhaul: All clocks have noticeably reduced voltages to improve battery life without compromising performance.[/B]
3. [B]Add More GPU Scaling steps to create a new 'low power' idle and more intermediate steps until an OC[/B]
4. Various FS, IRQ, MM, Mutex patches
5. Enable All tweaks for Badass (including low-bat powersave, allow bypass etc.)
6. [B]New 'Ultra low' CPU Idle steps (96-153mhz) - Low power idling[/B]
7. Mpdecision allowed to scale down to 96mhz
8. BadAss and SIO set as default gov/sched
9. Update all Ondemand based governors to upstream (Google)
10. Update LZO (faux123)
Thanks:
TeamChopsticks & CyanogenMod
TeamSXL
Cl3Kener
Team Hydra
TeamDS
faux123
Sultan
Tamcore
cretin45
showp1984
RomanBB
and any others I may have missed
Info on Governors/Schedulers
You may find my source hosted @ Github
XDA:DevDB Information
WildKernel for the T-Mobile Galaxy S II (hercules), Kernel for the T-Mobile Samsung Galaxy S II
Contributors
Emmanuel U
Kernel Special Features:
Version Information
Status: Beta
Current Beta Version: 001
Beta Release Date: 2014-05-27
Created 2014-05-28
Last Updated 2014-05-27
Click to expand...
Click to collapse
I haven't tested this yet, but it is on my "to test" list. I'm going to download it on my lunch break and flash it sometime on the weekend. Had a quick question though: what is the recommended date of the ROM one should use with this Kernel? The ROM I'm running was last updated back in March so I am unsure if any new CM features were implemented or removed from the kernel since that time and I would rather not be stuck in a boot-loop or nothing. The kernel I'm currently sporting is "3.0.101-DIABLO-3.3". You say yours is based off of Diablo 3.1, so I THINK it should play nice with this ROM, but I'm nervous I'll soft-brick my phone.
Is there a reason you didn't use Diablo 3.3 as the base?
Also, your OP states there are screenshots, but none are included? I don't need them (kernels don't really need screenshots, eh?), but just thought I'd point it out.
Thanks for being one of the ones keeping the t989 alive.
EDIT: I'm dumb... just saw the screenshot tab at the top. 18 hours on battery is pretty good. I get about 10 with how I have things set right now, so getting an extra 8 would be awesome.
bmg002 said:
I haven't tested this yet, but it is on my "to test" list. I'm going to download it on my lunch break and flash it sometime on the weekend. Had a quick question though: what is the recommended date of the ROM one should use with this Kernel? The ROM I'm running was last updated back in March so I am unsure if any new CM features were implemented or removed from the kernel since that time and I would rather not be stuck in a boot-loop or nothing. The kernel I'm currently sporting is "3.0.101-DIABLO-3.3". You say yours is based off of Diablo 3.1, so I THINK it should play nice with this ROM, but I'm nervous I'll soft-brick my phone.
Is there a reason you didn't use Diablo 3.3 as the base?
Also, your OP states there are screenshots, but none are included? I don't need them (kernels don't really need screenshots, eh?), but just thought I'd point it out.
Thanks for being one of the ones keeping the t989 alive.
EDIT: I'm dumb... just saw the screenshot tab at the top. 18 hours on battery is pretty good. I get about 10 with how I have things set right now, so getting an extra 8 would be awesome.
Click to expand...
Click to collapse
It'll work fine with older KitKat builds.. And I don't think you'll have compatibility problems with using it with a ROM that came with a newer version of Diablo. I was at one point using older builds of Cl3kener's kernels on newer builds...
Sent from my Carbonized GS²
suaverc118 said:
Thanks bro for doing this. I will flash and report
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
---------- Post added at 08:36 AM ---------- Previous post was at 08:31 AM ----------
Emmanuel, do you recommend CPU tuner or trickster or just stock performance to tweak settings?
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I will always recommend the stock performance app as it's apart of the system so you know for a fact it won't be holding any child proccesses which may effect battery etc.
mp3deviant721 said:
Just flashed it on Carbon 5/21. Initial thoughts are that it seems to get to the boot animation quicker than Uber. But initial reboot is long... I thought my phone was stuck in a bootloop... Also does not kill vibration after subsequent reboots after the initial reboot after flashing the kernel. It's just as quick as Uber and seems to work with Kernel Tweaker. This kernel also won't crash the phone playing 1080p in portrait... Love the fact that this kernel has sleep2wake as well. Will report back after using it for the day...
Any chance of a 2ghz version? And does this work with PAC outta the box?
Edit: Forgot to say thanks for giving us another kernel for the good ol' Herc. So, thanks.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Yes it should work out of the box with ALL KITKAT roms. As for Jellybean and before I'm not 100% sure as they may and most likely use different ramdisks. Also I doubt you will see me push out a 2ghz version as I don't really like to OC, but when I do I like to stay in the OC 300-400mhz stage. Once getting above that you risk damaging your hardware overtime which can stunt it's life.
suaverc118 said:
Not sure if its kernel related but after rebooting my phone because of play store issues. After rebooting, I lost all of my widgets that I placed on 4 screens.
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
How many times did this issue occur to you? Did it happen right after kernel installation? Because it's sounding more like a rom related issue.
After about 12hrs into it, video recording added a nonstop buzzing sound in all video res. Reboot fixed the issue. See catlog. I am currently on AlpineRom.
Emmanuel U said:
Yes it should work out of the box with ALL KITKAT roms. As for Jellybean and before I'm not 100% sure as they may and most likely use different ramdisks. Also I doubt you will see me push out a 2ghz version as I don't really like to OC, but when I do I like to stay in the 300-400mhz stage. Once getting above that you risk damaging your hardware overtime which can stunt it's life.
Click to expand...
Click to collapse
I meant all older builds of KitKat ROMs. My bad. I didn't claify. I'll edit my post. And I thought I'd ask about 2ghz, it was nice when I had it...
Sent from my Carbonized GS²
woot
a wild kernal appears
Is Hyper supposed to stay a higher frequency on Core 0 when you are playing music or running an app and not doing anything else and with the screen on? I'm currently set at 1836/192 and the frequency settles more at 756 on Core 0. If I set minimum to 384 then it seems to settle more on 384. I couldn't find much info on how Hyper works so I'm just wondering if this is normal.
Sent from my Carbonized GS²
Something went very wrong....
About an hour after installing this kernel last night I picked my phone up off the table and noticed it was in a boot loop.
I went into recovery and wiped the cache and it eventually booted to the CM-11 Welcome screen asking me my language preference.
I rebooted back to recovery to restore from my backup and (long story short), I couldn't because the partition table on my external sd card has been destroyed. I don't know what would have done that I wasn't actually using the phone at the time.
Sorry I don't have logs, but if anyone knows how to recover an sd card with no partition table i'd love to hear about it. I tried gpart/gparted with no success. I assume the partition was some kind of FAT but I don't know for sure.
Last night
Sent from my SAMSUNG-SGH-T989 using XDA Premium 4 mobile app
sfleury said:
About an hour after installing this kernel last night I picked my phone up off the table and noticed it was in a boot loop.
I went into recovery and wiped the cache and it eventually booted to the CM-11 Welcome screen asking me my language preference.
I rebooted back to recovery to restore from my backup and (long story short), I couldn't because the partition table on my external sd card has been destroyed. I don't know what would have done that I wasn't actually using the phone at the time.
Sorry I don't have logs, but if anyone knows how to recover an sd card with no partition table i'd love to hear about it. I tried gpart/gparted with no success. I assume the partition was some kind of FAT but I don't know for sure.
Click to expand...
Click to collapse
That happened to me a short while back using A different ROM and kernel. For me, my sd card died and I sent it back under warranty.
Sucks cause you lose all the data and no way to recover but if you can warranty it,I would.
Sent from my SM-T310 using XDA Free mobile app
bmg002 said:
That happened to me a short while back using A different ROM and kernel. For me, my sd card died and I sent it back under warranty.
Sucks cause you lose all the data and no way to recover but if you can warranty it,I would.
Sent from my SM-T310 using XDA Free mobile app
Click to expand...
Click to collapse
Ya I suspect the card has failed based on how it is behaving in my computer. I will look into warranty but I'm not very good at keeping the paperwork for such things.
sfleury said:
Ya I suspect the card has failed based on how it is behaving in my computer. I will look into warranty but I'm not very good at keeping the paperwork for such things.
Click to expand...
Click to collapse
I'm not either, but if you know where you bought it from (online sources are usually the best as you will have an email receipt) AND you have an account with them, they MAY be nice and pull your receipt up for you. Sandisks warranty info though states that you need to have your original receipt AND the original packaging. When mine died they were happy enough with a photocopy of the receipt being emailed to them and they didn't need the original packaging.
It sucks when it does die because you lose your data and you don't know if it was due to the new stuff you were trying or simply a fluke. I've been meaning to try my new stuff again on my card (moving /data to external storage), but I'm nervous that that is what killed it. It gave me a nice performance boost (surprisingly), but I only got about 2 months before things died for me
Now I back up my SD cards roughly once every 2 months just in case one dies on me again. Well, unless I make no changes OR I only add stuff I can re-download easily.
Boot loop for me, using the latest Pac Man nightly...
ricthot said:
Boot loop for me, using the latest Pac Man nightly...
Click to expand...
Click to collapse
Same here dude.. Cannot change governor or phone will freeze and then go bezerk...boot loops etc. Will not work on alpine or carbon for me
Nice, new kernel. Something to play with this weekend.
Sent from my SAMSUNG-SGH-T989 using XDA Free mobile app
Hai There!
Currently im using CM 12 and Solid Kernel v1.6. At the moment im getting 31000 in Antutu, and 9000 in Quadrant (Artmod gave me 28000 in Antutu with Solid v1.6). But i`d like to know..is there rom & kernel that gives even better perfomance?
Wanted to give a shot to Jolla kernel, but it looks like it doesnt work with CM12, as it just gets stuck at Cyanogenmod loading forever (left it for 6+ mins and still at CM12 logo loading).
So yea..Is there anything that is even faster?Just wanna see how far this lil beast can go!
Thanks.
Better score in benchmak doesn't always mean faster/smoother working ROM
wow you really got 31k in antutu? my highest ever with my OG is 26k+ using ARTMOD and stock kernel. I don't think that will be healthy for your phone though, since overclocking both CPU,GPU and some other tweaks are not meant to be.
Yes, it was with CM12 nightlies and Solid Kernel v1.6 (Only good things heard bout this one). Will try to post screenie later, after i do the test again. Wanted to fully empty my internal storage, and accidentaly deleted EVERYTHING..
So far CM 12 is fastest & smoothest rom i`ve used. But it`s battery usage monitor confues me alot - google services eats most (20+%), and screen uses 5-10% according to it. Doubt if its true..Oh..and the camera sucks on CM12.
WreckLv said:
Yes, it was with CM12 nightlies and Solid Kernel v1.6 (Only good things heard bout this one). Will try to post screenie later, after i do the test again. Wanted to fully empty my internal storage, and accidentaly deleted EVERYTHING..
So far CM 12 is fastest & smoothest rom i`ve used. But it`s battery usage monitor confues me alot - google services eats most (20+%), and screen uses 5-10% according to it. Doubt if its true..Oh..and the camera sucks on CM12.
Click to expand...
Click to collapse
haha yep, i switched back to stock after trying out CM12 its so buggy as hell for now, and yes camera sucks lol and by the way how was the performance using solid kernel? ive been thinking about that kernel for a while.
Well, have to play around with it a bit more..It`s my second day with that kernel, and all i`ve been doing is just messing around with roms - cant really stop doing that when you have started..lol..Benchmarks show better score..thats for sure. But other than that... And be ''went back to stock'' u mean Artmod, or full stock?
About CM12..yeah it feels like ''beta'' (which it is...) but core features calls, messages, and browser, work just great. But cuz of camera i wont use it for long.
Screenie : http://www.bildites.lv/images/eim07vknqutdcncck32.png
WreckLv said:
Well, have to play around with it a bit more..It`s my second day with that kernel, and all i`ve been doing is just messing around with roms - cant really stop doing that when you have started..lol..Benchmarks show better score..thats for sure. But other than that... And be ''went back to stock'' u mean Artmod, or full stock?
About CM12..yeah it feels like ''beta'' (which it is...) but core features calls, messages, and browser, work just great. But cuz of camera i wont use it for long.
Screenie : http://www.bildites.lv/images/eim07vknqutdcncck32.png
Click to expand...
Click to collapse
well that's really high dang. haha yeah that excitement I went full stock. ARTMOD still has some fixes to be done, i flashed the original KDZ file haha now my phone is really virgin stock lol. I ran antutu on it, i attached it below so you will have a reference of how the Stock performs :highfive: that's the highest i could get on stock. nearly same with artmod.
CM12 by Kevinjoa (GEE) and Solid Kernel V1.6
Loller79 said:
CM12 by Kevinjoa (GEE) and Solid Kernel V1.6
Click to expand...
Click to collapse
wtf
it´s ... :victory::victory::victory:
Loller79 said:
CM12 by Kevinjoa (GEE) and Solid Kernel V1.6
Click to expand...
Click to collapse
Hi Loller79, can you please post the settings ? My storage I/O is just 656 hence the total score is lower
Original CM11 M12 snapshot with Solid Kernel V1.5
The good-old kitkat ain't out of the game yet!!
kmw03062 said:
Original CM11 M12 snapshot with Solid Kernel V1.5
The good-old kitkat ain't out of the game yet!!
Click to expand...
Click to collapse
I got 17k on my GEEHRC (GPROJ) running CM11M12 WITH same kernel... Any guess why?
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Press THANKS if I help
MZ_. said:
I got 17k on my GEEHRC (GPROJ) running CM11M12 WITH same kernel... Any guess why?
Sent from my LG-E975 powered by my OWN CyanogenMod 11 port
Press THANKS if I help
Click to expand...
Click to collapse
Please do as follows:
1. reboot your phone and DON'T use it for around 5 mins
2. open your antutu (with the latest version of course) and run the test
3. kindly post your result here so we could see and give you some advise
cheers!
kmw03062 said:
Please do as follows:
1. reboot your phone and DON'T use it for around 5 mins
2. open your antutu (with the latest version of course) and run the test
3. kindly post your result here so we could see and give you some advise
cheers!
Click to expand...
Click to collapse
Well, did the same as you told me! Was able to get up to 18K now I had 24K on my stock KK ROM, my best was on CM10.2 which was 27K, any other guess? Other performance (Games like Real Racing 3) doesn't decrease, not even on recording screen while playing games
MZ_. said:
Well, did the same as you told me! Was able to get up to 18K now I had 24K on my stock KK ROM, my best was on CM10.2 which was 27K, any other guess? Other performance (Games like Real Racing 3) doesn't decrease, not even on recording screen while playing games
Click to expand...
Click to collapse
Well…
Perhaps you can post the screenshot of your result so we can see the individual scores.
cheers
kmw03062 said:
Please do as follows:
1. reboot your phone and DON'T use it for around 5 mins
2. open your antutu (with the latest version of course) and run the test
3. kindly post your result here so we could see and give you some advise
cheers!
Click to expand...
Click to collapse
kmw03062 said:
Well…
Perhaps you can post the screenshot of your result so we can see the individual scores.
cheers
Click to expand...
Click to collapse
I will! After I get out of my bootloop haha (testing my ROM)
Hit THANKS if I helped
kmw03062 said:
Well…
Perhaps you can post the screenshot of your result so we can see the individual scores.
cheers
Click to expand...
Click to collapse
Well! ARTMOD V7 got my results back
Hit THANKS if I help, or you like my post!
To OP who is getting 31k antutu: How much did you overclock to? I imagine the phone must get crazy hot while running antutu.
belako said:
To OP who is getting 31k antutu: How much did you overclock to? I imagine the phone must get crazy hot while running antutu.
Click to expand...
Click to collapse
I'm over clocked to 1.7GHz. And no not "THAT HOT" but rises over 40° I over clocked by SOLID KERNEL. Any other way to achieve more clock rate?
Hit THANKS if I help, or you like my post!
wow
It 's the highest score to look in lollipop, that governor did you use?
Is anybody using Mokee over here?
If I'm not wrong, in the past the rom was CM based. However, now it seems to be AOSP based.
What can you comment on its quality and community support?
Thx
g0at1 said:
Is anybody using Mokee over here?
If I'm not wrong, in the past the rom was CM based. However, now it seems to be AOSP based.
What can you comment on its quality and community support?
Thx
Click to expand...
Click to collapse
Yes, im using mokee
duongthinh441 said:
Yes, im using mokee
Click to expand...
Click to collapse
And how about it? Do you recommend? How does it compare to blisspop and slim?
g0at1 said:
And how about it? Do you recommend? How does it compare to blisspop and slim?
Click to expand...
Click to collapse
you should try if you like it great ?
duongthinh441 said:
you should try if you like it great ��
Click to expand...
Click to collapse
Can you tell us in a few words, what bugs have you mentioned while using this ROM?
On official CM 12.1 black screen bug is very annoying,everything else is quite good.
saneksem said:
Can you tell us in a few words, what bugs have you mentioned while using this ROM?
On official CM 12.1 black screen bug is very annoying,everything else is quite good.
Click to expand...
Click to collapse
Cm 12.1 and mokee No bug with my device f240L + wildkernel , but batery drain
duongthinh441 said:
Cm 12.1 and mokee No bug with my device f240L + wildkernel , but batery drain
Click to expand...
Click to collapse
that's why i am asking,i don't use wildkernel because of battery draing,but without it black screen bug appears
i want to know about usage with stock ROM kernel
saneksem said:
that's why i am asking,i don't use wildkernel because of battery draing,but without it black screen bug appears
i want to know about usage with stock ROM kernel
Click to expand...
Click to collapse
I think you can't using rom with stock kernel, because stock and cm are different !!!
---------- Post added at 05:07 PM ---------- Previous post was at 05:03 PM ----------
Sorry , because I am a Vietnamese , so my english is not perfect
Well, I decided to test the rom. Up to now I only noticed the following :
When I set Open Camera to HDR, after about 5 seconds the screen goes black and I found no way to get back at it without rebooting. Maybe, that's what @ShadySquirrel was working on before his device had USB problems.
On both Bliss and Slim, if you reboot while on LTE, when you get back at the home screen you'll notice you have no signal. Thus, the best way is changing to 3G before rebooting, and then changing again to LTE after the phone has restarted.
Mokee still has this same problem. However, up to now, it seems to be more stable.
For the rest, I'd say it's pretty smooth. No screen glitches whatsoever.
It has most feature Slim does, but what I miss is more about some design details that I eventually could try to request them later...
I really recommend moving to it as it seems like it has been developed and tested up to the last release. So, you'll surely find a level of stability we didn't have on lollipop.
g0at1 said:
When I set Open Camera to HDR, after about 5 seconds the screen goes black and I found no way to get back at it without rebooting. Maybe, that's what @ShadySquirrel was working on before his device had USB problems.
Click to expand...
Click to collapse
If that happens in other apps, you have your culprit: PCC commit for kernel/updates for LiveDisplay in device tree.
g0at1 said:
Well, I decided to test the rom. Up to now I only noticed the following :
When I set Open Camera to HDR, after about 5 seconds the screen goes black and I found no way to get back at it without rebooting. Maybe, that's what @ShadySquirrel was working on before his device had USB problems.
On both Bliss and Slim, if you reboot while on LTE, when you get back at the home screen you'll notice you have no signal. Thus, the best way is changing to 3G before rebooting, and then changing again to LTE after the phone has restarted.
Mokee still has this same problem. However, up to now, it seems to be more stable.
For the rest, I'd say it's pretty smooth. No screen glitches whatsoever.
It has most feature Slim does, but what I miss is more about some design details that I eventually could try to request them later...
I really recommend moving to it as it seems like it has been developed and tested up to the last release. So, you'll surely find a level of stability we didn't have on lollipop.
Click to expand...
Click to collapse
Can you please test it few days and tell if black screen appears anywhere else except camera app(and better don't use stock camera)?
g0at1 said:
Well, I decided to test the rom. Up to now I only noticed the following :
When I set Open Camera to HDR, after about 5 seconds the screen goes black and I found no way to get back at it without rebooting. Maybe, that's what @ShadySquirrel was working on before his device had USB problems.
On both Bliss and Slim, if you reboot while on LTE, when you get back at the home screen you'll notice you have no signal. Thus, the best way is changing to 3G before rebooting, and then changing again to LTE after the phone has restarted.
Mokee still has this same problem. However, up to now, it seems to be more stable.
For the rest, I'd say it's pretty smooth. No screen glitches whatsoever.
It has most feature Slim does, but what I miss is more about some design details that I eventually could try to request them later...
I really recommend moving to it as it seems like it has been developed and tested up to the last release. So, you'll surely find a level of stability we didn't have on lollipop.
Click to expand...
Click to collapse
Are you using the HISTORY 160420 version?
DanC7766 said:
Are you using the HISTORY 160420 version?
Click to expand...
Click to collapse
I was until some days ago. But I had problems with the screen going black in some inconvenient moments. For example when I was driving somewhere I didn't know very well and had to reboot to get back with waze.
Thus, I went back to bliss but then I had sudden reboots that had the same effects as black screens while I was driving.
Well, to wrap up I'd recommend Mokee as long as your needs won't be much affected if a reboot is needed. It really is a smooth rom.
Oh, I didn't test bluetooth...
Anyway, I am posting to their g+ community right now pointing at that bug. Maybe they can do something about it.
BTW, if anybody decides to test Vanir, please share the experience.
Since yesterday I've decided to try the latest wild kernel with mokee again.
Up to now no black screens.
If something else happens I'll report back.
hello g0at1 i dont know if you been using an lg optimus g pro for a long time but i have buts its like all roms for the e980 have flashes for black screen and i wonder if does the mokee for the e980 also causes ur screen to get hot too cuz for my lg e980 screen gets hot near the home button from the different roms such as carbon rom which is the current rom im using and other roms such as cynogenmod and resurrection remix and please reply quickly becuz im so frustrated with this phone for a while now even though i have a big battery for it for 9300mah
Hey!
I have my G Pro since 2013.
Different from other roms, Mokee doesn't overheat. Even if you don't use it with wild kernel. However, with wild kernel I have had no black screens in a week.
Then, you should try it.
Well, I'm back to report that although I didn't have black screens in two weeks, I did have some screen flickering and they would only go away after a reboot.
I now think they've been blind building Mokee for our device for some time. Thus, I'm back at slim following @ShadySquirrel advice to try different governors in order to avoid rebooting.
I'm using Intelimm right now. Let's see if it'll reboot some time.
Previously I had tried Inteliactive and intelidemand... Both rebooted. Then, I checked kmsg and I did not find any dsp subsystem error.
As of right now I'm convinced that lg ogp doesn't react too well with the lollipop, regardless what flavor of rom. If it's not one problem, then it's another. As much I love this device, I really don't think it can be a stable device running anything more than the kitkat. Because with the lollipop, all the issues were never really fixed. Instead, they're merely are patched over, as if they're "duct taped" together to keep from falling apart. Which can't hide any of the problems for long. So as much as I hate to admit and tell you, no matter what combo you try, there is no way to make this device run well, while it's running any of the lollipop rom.
Sent from my LG-E980 using XDA-Developers mobile app
hawkwind212 said:
as of right now i'm convinced that lg ogp doesn't react too well with the lollipop, regardless what flavor of rom. If it's not one problem, then it's another. As much i love this device, i really don't think it can be a stable device running anything more than the kitkat. Because with the lollipop, all the issues were never really fixed. Instead, they're merely are patched over, as if they're "duct taped" together to keep from falling apart. Which can't hide any of the problems for long. So as much as i hate to admit and tell you, no matter what combo you try, there is no way to make this device run well, while it's running any of the lollipop rom.
Sent from my lg-e980 using xda-developers mobile app
Click to expand...
Click to collapse
so true bro.
Andy Chi said:
so true bro.
Click to expand...
Click to collapse
I went back to SlimLP. Only this time I'm using adaptative governor.
Also, I'm using Kernel Adiutor v2.0 and LMK set to aggressive.
I noticed that in my device this combination worked well.
After that, no more random reboots.
But I have it pretty clear, my next phone will be a nexus again...
Just don't know yet if I'll opt for the 6P or nexus 2016...