I love this case. I got it in turquoise mint and I love it. The case is a TPU silicone (sorta) case. It fits but its flimsy enough to easily take on and off. Sadly, what I didn't know is that when shined in the light, the phone case is a bit glittery. But hell, I don't care.
This case also comes in many colors. Plus when I got the package, there was a cheap cut out Thank You card. That means a lot, considering all the stuff I buy from amazon is in bubble wrap and just a....disgusting plastic wrap.
Link: http://www.amazon.com/gp/aw/d/B00BTOXHJW
Sent from my LG-LS970 using xda app-developers app
Inside of case.
Sent from my LG-LS970 using xda app-developers app
Only thing I don't like about those cases are the cutouts for buttons. When I get a tpu case I want to be as protected as possible. I'd go crazy looking at those holes for the antenna and sd card slot. Just extra places for dirt to get in.
Stealyourface said:
Only thing I don't like about those cases are the cutouts for buttons. When I get a tpu case I want to be as protected as possible. I'd go crazy looking at those holes for the antenna and sd card slot. Just extra places for dirt to get in.
Click to expand...
Click to collapse
I do have like two extra port holes on the case that I don't understand why they're there.
Sent from my LG-LS970 using xda app-developers app
TaviRawr said:
I do have like two extra port holes on the case that I don't understand why they're there.
Sent from my LG-LS970 using xda app-developers app
Click to expand...
Click to collapse
The top one is the antenna and the one on the left is the sim card slot. That case made for the Korean model that our phone took design after. Just those 2 changes. Are the only difference.
Well now you ruined the mystery to him lol
Sent from my LG-LS970 using xda premium
Stealyourface said:
The top one is the antenna and the one on the left is the sim card slot. That case made for the Korean model that our phone took design after. Just those 2 changes. Are the only difference.
Click to expand...
Click to collapse
Lolz the mystery....is ruined!!! But thank you lolz. I keep forgetting this phone was made in Korea (even though it says on the back of the phone).
Sent from my LG-LS970 using xda app-developers app
Have had this case for a couple months now; best of the four TPU-type cases I've had yet. It stays on very well, doesn't lift up screen protectors (!), and protects enough such that I still have no damage after a couple drops (3-4 feet out of the pocket style). The glittery styling on the back is nice yet subtle too. Yes the cutouts are a bit odd on a US model, but all things considered it could be worse!
Related
Time to get this case reviewed right?
Honestly, if i had to choose between this and the commuter i would pick this one up. Feels really solid and after a 10 mile hike at zion with some drops , it proved its point.
enjoy
http://youtu.be/zaaE78ZPBjU
Yeah, u forgot one thing though. The builtin screen protector sucks. I just took mine off yesterday and added a best skin ever screen protector with my defender case and its awesome! Perfect combination.
Sent from my SGH-T999 using xda app-developers app
ergibson83 said:
Yeah, u forgot one thing though. The builtin screen protector sucks.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I think that's just your opinion I personally like it.
Sent from my SPH-L710 using xda premium
shook187 said:
I think that's just your opinion I personally like it.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
This
I like it for what it's meant for. But again I couldn't rock this case on a daily basis
Sent from my SGH-T999 using xda premium
Popped my screen protector out too. Hated how ugly it made the screen
equlizer said:
Popped my screen protector out too. Hated how ugly it made the screen
Click to expand...
Click to collapse
Did the same thing, best case I've used so far. If only the commuter's buttons weren't so stiff that would be my choice.
Sent from my GT-I9300 using Tapatalk 2
Love it, very solid... better than the kraken IMO
Would anyone be interested in swapping their white inner hard shell for my black... Raider fans, I'm talking to you
* 101% Madridista × RMCF *
equlizer said:
Popped my screen protector out too. Hated how ugly it made the screen
Click to expand...
Click to collapse
+1
gadget069 said:
Did the same thing, best case I've used so far. If only the commuter's buttons weren't so stiff that would be my choice.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
The commuter was such a disappointment
Sent from my SGH-T999 using xda premium
equlizer said:
Popped my screen protector out too. Hated how ugly it made the screen
Click to expand...
Click to collapse
Indeed, I mean it brings the quality down like a mofo. But I use it as a hiking case con can't deal with so much bulk on a Daly basis
Sent from my SGH-T999 using xda premium
after less than two month of usage
usb cover torn off
rubberized casing is not conform to polycarbonate casing anymore
haroldz123 said:
after less than two month of usage
usb cover torn off
rubberized casing is not conform to polycarbonate casing anymore
Click to expand...
Click to collapse
Same issues here except my USB cover is still intact. Luckily tho sprint offered me a 1 yr warranty through them so i'm gonna get a new 1 soon.
Do you replace your batteries? How often do you remove your cover?
Sent from my SPH-L710 using xda app-developers app
haroldz123 said:
after less than two month of usage
usb cover torn off
rubberized casing is not conform to polycarbonate casing anymore
Click to expand...
Click to collapse
Same thing happened to mine right after the 2 month mark. I sent an email to otterbox, they requested proof of ownership and in less than a week they sent me a new case at no cost.
Sent from my SCH-I535
wildgamer100 said:
Same issues here except my USB cover is still intact. Luckily tho sprint offered me a 1 yr warranty through them so i'm gonna get a new 1 soon.
Click to expand...
Click to collapse
That happen to mine, Within in a month mine was real loose, good thing I bought it at a local att store so they replaced it, had the new one for a few months and it's not loose at all. Maybe they had defects on some.
Sent from my SGH-T999 using xda app-developers app
When you say a new case, do you mean holster/case? I was walking and my holster caught something and the clip broke off. The case is also squeaky and the lip of the case is getting loose and is starting to expose the plastic edges.
owlchemist said:
When you say a new case, do you mean holster/case? I was walking and my holster caught something and the clip broke off. The case is also squeaky and the lip of the case is getting loose and is starting to expose the plastic edges.
Click to expand...
Click to collapse
Got everything replace, I still had the box so I put everything in there, and they gave me a whole new set in a new box
Sent from my SGH-T999 using xda app-developers app
g2uzer said:
Got everything replace, I still had the box so I put everything in there, and they gave me a whole new set in a new box
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Cool. I'll fire off an email to them then. I have my zoogue cases and will probably order a UAG, commuter, or ballistic to hold me over.
Are you guys taking the case on and off frequently or just naturally happens?
And by proof, is the original packaging good enough?
Yeah the corners don't have a rail like the sides to snap into. They're sending me a complete otterbox to replace mine. Maybe they have fixed the design.
Sent from my SCH-I535 using xda app-developers app
Hey XDA just thought I'd put this up incase anyone is shopping for a case. I've had this case for a little over two months. I am a college student, I love bike riding, and this case goes with me everywhere. It has been an awesome case to have, it's saved my phone from MANY nasty falls while bike riding and running in and out of classes.
Fit:
The case fits the phone perfectly. Every cutout and button is done right, and I haven't had any issues with charging port or the headphone jack. The rubber on this case is a nice tight fit; it hasn't gotten loose on me during all this time of constant in and out of my pocket. The lip that this case has is awesome, it provides awesome protection for the screen when it falls face down or even just laying it flat on tables or wherever.
Look:
Well the case is a very rugged manly case. You can tell you have a serious case when you look at it and everything about it screams protection. I have the white and black one which to me looks awesome (although it would look better if I had the white S3).
Protection:
This is the most important part of owning a case like this. The case offers awesome protection for your phone and you certainly won't be scared of dropping your phone with this bad boy. The rubber absorbs impact perfectly and again that lip makes protection even better. I haven't really used the screen protector much because I personally don't like them BUT it is awesome! I did not loose any sensitivity on my screen and it's a bit thicker than you would expect so great protection there.
Overall I really enjoy having this case. It goes with me everywhere and keeps my phone very well protected. I should add that it has survived 3ft, 5ft, and 6ft drops easily. It even survived a nasty experience where my girl flung it at me when I got her mad
EDIT: 10/29
I was riding my bike today on some rocky trails and I forgot I had my phone in my jacket pocket. So I dropped the phone and saw it fall face down on some pretty nasty rocks Fortunately I decided to use the screen protector today Well the screen protector got a bit scratched but my phone is perfect! I barely got the white GS3 so it would've gotten me mad to break it after just two days with it lol
I love the SG Maxx. My only problem with it is pressing the back button in the lower right hand corner. The silicon case gets in the way sometimes, but eventually you get used to it.
Lol I had that issue the first day but I trained myself to use the left thumb for it and never had that problem again.
Sent from my SPH-L710 using xda premium
How loose is the case if you don't use the provided screen protector? I already have the glass spectre, so I'm not sure if they will play nicely together.
It's actually not loose at all. I have been using it without the screen protector and it's awesome. For a while I had an antiglare protector with it and it didn't peel or affect it in any way
Sent from my SPH-L710 using xda premium
That case looks sexy
Sent from my SGH-T999 using xda app-developers app
Me likes it!
One potential problem I see is that the case is too raised near the sides of the screen, which might make it difficult to touch that are.
Other than that, I'd use have like this on my phone.
Simonetti2011 said:
Me likes it!
One potential problem I see is that the case is too raised near the sides of the screen, which might make it difficult to touch that are.
Other than that, I'd use have like this on my phone.
Click to expand...
Click to collapse
Now that you mention it the sides were a bit of a problem the first day; it was the same issue as the back key. That was quickly solved by using the opposite finger to touch that side though. It was a small change of habit but worth it for me.
Crisisx1 said:
That case looks sexy
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I like it better now that I have a white gs3
I BOUGHT THIS CASE FOR MY CELL...ALL BLACK THOUGH...ITS REALLY NICE AND CLEAN...AND I DONT USE THE THE BELT CLIP..BUT IM NOT GOING TO LIE...I SOMETIMES USE IT...CAUSE ITS PRETTY NICE TOO LOL!!
Sent from my SGH-T999 using xda app-developers app
Post a picture
Sent from my SPH-L710 using xda premium
Good drop protection but over time the port covers become loose. I have had it on my phone since day 1 and I have dropped on concrete and wooden floors from about 3 feet and it has held up well
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Here it is with my white phone : D
Sent from my SPH-L710 using xda premium
rolo1387 said:
I BOUGHT THIS CASE FOR MY CELL...ALL BLACK THOUGH...ITS REALLY NICE AND CLEAN...AND I DONT USE THE THE BELT CLIP..BUT IM NOT GOING TO LIE...I SOMETIMES USE IT...CAUSE ITS PRETTY NICE TOO LOL!!
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Your caps lock seems to be stuck....
Sent from my SCH-I535
Still loving this case! Highly recommend it
Sent from my SPH-L710 using xda app-developers app
i just recieved this aluminum battery cover for my s3 and it looks amazing!
but..it did make my phone a tad bit thicker so my old case doesnt fit anymore
i dont mind that it made it a tad thicker it actually feels better now in the hands
is there any good cases out there that would fit for this? my idea was to buy the
aluminum battery cover then buy a bumper but now im worried that the bumper might
not fit right as well considering my phone is more thicker now
if anybody has any pictures of any cases/bumper that will fit on my phone pls post
some on this thread would gladly appreciate it
Most any full TPU case will probably fit.
Almost no slim/open style cases though. Like the Rock case style probably won't fit.
Where did you get that? I like that!
Sent from my SAMSUNG-SGH-I747 using xda premium
CZ Eddie said:
Most any full TPU case will probably fit.
Almost no slim/open style cases though. Like the Rock case style probably won't fit.
Click to expand...
Click to collapse
thankyou,what do you think on a bumper though? any thoughts if it will fit or not?
alexgarrett said:
Where did you get that? I like that!
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
i got it off ebay it was $8.95 free shipping
i got 3 of these but with different colors, never could use it because its blocking all my phone and wifi signal.
Sent from my SGH-T999 using xda premium
koolboyztn said:
i got 3 of these but with different colors, never could use it because its blocking all my phone and wifi signal.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
everything is fine on my end..havent got any signal loss since i put it on..
I've had an Otterbox Defender for my S3 now for quite awhile. The silicone over the plastic shell always seems to stretch over time causing a loose fit. I know you can contact customer support and have a new case sent to you from Otterbox, but I figured there had to be something to tighten the silicone up. After browsing the web, I heard that if you boil the silicone for a few minutes in boiling water, it will tighten it up. I figured I'd give it a try and it actually did work, the case now fits like it did when it was new.
How long did you boil it? I stopped using my defender because of this issue
Boiled it for about 2 minutes. If your silicone is stretched too far though it won't go 100% back to normal. It will help though that's for sure!
Sent from my SGH-T999 using xda app-developers app
I went with the body glove tough suit because I don't like how the otter box distorts the screen with that rainbow effect. No stretching yet but if I have that issue I'll use your idea.
Sent from my SCH-I535 using Tapatalk 2
It should do the trick for your case as well. Hopefully it won't stretch like the otterbox to begin with.
Sent from my SGH-T999 using xda app-developers app
Im on my 3rd case, I will try this next.
Sent from my PACmaned SCH-I535
Moving to Accessories which is universal to all S3s.
Yup. Theres vids on youtube aswell
Sent from my Galaxy S3 using neighbors wifi
Done this also. But immersed only for a minute. Then went to a cup full of cold water.
Dont use tongs when getting the case off the water as it will ruin the shape of the case. As the case is sensitive when its really hot.
Sent from my GT-I9300 using xda app-developers app
I'm definitely going to try this
Sent from my SCH-I535 using xda premium
Casper34 said:
Im on my 3rd case, I will try this next.
Sent from my PACmaned SCH-I535
Click to expand...
Click to collapse
Lol im on my third case as well gonna try as soon as I get home from work
Sent from my SGH-T999 using Xparent Skyblue Tapatalk 2
I did this today after work. Boiled for 1 minute then in cold water it did snug it back up.... Wonder for how long though
Sent from my SCH-I535 using xda premium
I had two otterbox defender cases and got fed up with the stretching, so I looked around found Ballistic SX0932-M385 SG MAXX. I'm sort of a clean freak and take off the case it always keeps a tight fix.
Sent from my SPH-L710 using xda premium
ironman1000 said:
I had two otterbox defender cases and got fed up with the stretching, so I looked around found Ballistic SX0932-M385 SG MAXX. I'm sort of a clean freak and take off the case it always keeps a tight fix.
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Ballistics sg maxx is a great case. Best drop protection imo. With them big chunky corners it just bounces back at you lol. My wife had it on hers for awhile.
Sent from my Galaxy S3 using neighbors wifi
zakth said:
I went with the body glove tough suit because I don't like how the otter box distorts the screen with that rainbow effect. No stretching yet but if I have that issue I'll use your idea.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
HAHA BUDDY!!!! Same thing here! I love my BodyGlove ToughSuit!!! Gray/White Version Here! I got sick and tired of the OtterBox Warranty claims, however this is the first device I've had the stretching issue with an OtterBox...
I also had the same issues, solved them (temporary) by heating up the rubber in a microwave. Well, the rubber still started to stretch again after some time, I contacted Otterbox and received a brand new Otterbox Defender which still looks very good. I´ve removed the screen protector though
Ive just stopped using my defender because of this reason, and I won't buy another one again because of it.......... thought they were supposed to be the best.......
Well, unfortunately there is hardly a similar case available which 1) offers some protection and 2) looks somehow decent and fancy enough the be used on a daily basis.
There are some similar chinese cases available which also offer a hard plastic shell and some rubber around...but look in my oppinion rather ugly than a regular Otterbox Defender.
Have a look at this one : http://www.amazon.de/yuba-RoboCase-...1367166500&sr=8-2&keywords=galaxy+s3+survivor
Since the support was kind enough to me, though I bought my case used in another board and didn´t receive a invoice, I may still consider to use other Otterbox Cases with other devices.
The stretching isn't the only flaw with these cases. The clips that hold the two plastic portions together also seem to break after awhile. Guess you can't complain too much when they send another free though.
Sent from my SGH-T999 using xda app-developers app
MiG8GT said:
The stretching isn't the only flaw with these cases. The clips that hold the two plastic portions together also seem to break after awhile. Guess you can't complain too much when they send another free though.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
My clips broke and they sent another one not liking the case might try something new like the ballistic sg maxx
Sent from my SPH-L710 using xda app-developers app
Think this is a good buy? It's only $7.25, looks nice..
http://www.ebay.com/itm/Brushed-Met...t=US_Cell_Phone_PDA_Cases&hash=item4855908724
People have complained about the Incipio Aluminum cases messing with cell reception, this would likely do the same. Unless its just plastic that looks like aluminum.
Also, it seems to block the IR port.
It does look nice though :\
Nippero said:
People have complained about the Incipio Aluminum cases messing with cell reception, this would likely do the same. Unless its just plastic that looks like aluminum.
Also, it seems to block the IR port.
It does look nice though :\
Click to expand...
Click to collapse
Ahh that sucks.. I'll pass on it then, thanks for the info :good:
It says in the description that it is plastic..it is just made to look like aluminum
Sent from my HTC One using Tapatalk 2
clninja said:
It says in the description that it is plastic..it is just made to look like aluminum
Sent from my HTC One using Tapatalk 2
Click to expand...
Click to collapse
Hmm. I don't know. The description says:
"It is constructed of brushed aluminum metal and hard poly carbonate (PC) to ensure long lasting durability and protection."
So it seems it's made of BOTH?
Sent from my HTC One using xda app-developers app
I have the black version. Its plastic. My wife's is coming apart. The back seems like its glued on.
Sent from my HTC One using xda app-developers app
cbircham said:
I have the black version. Its plastic. My wife's is coming apart. The back seems like its glued on.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Interesting.. so a bit of a cheap feel to it?
I love the look of the one I linked, but I won't get it if it will mess with reception.. thanks for the replies fellas!
Looks like it provides very little if any protection. Pass.
Its not too bad. It does not affect reception at all. I personally think it makes the phone a little big. The top sticks out a little making the power button harder to reach. It looks nice but I don't like it.
Sent from my HTC One using xda app-developers app