Develop Bugs

Please help my brother's T-mobile Dash.

Full unlocked (ApplicationUnlock, USPL,)
When upgraded to 6.1, it stucked at 98% and the upgrade tool reported: Something happened with Flash Writer.
Then I enter to Bootloader, run upgraded again, but it always stuck at 3% (Some reportings: Invalid Model, Invalid Device ID, The image is corrupt.). Many times to tried again, many other Roms, but the same error (stuck at 3%).
Tried via SD menthod, but not run.
Please show me the way to fix.

nhathoa said:
Full unlocked (ApplicationUnlock, USPL,)
When upgraded to 6.1, it stucked at 98% and the upgrade tool reported: Something happened with Flash Writer.
Then I enter to Bootloader, run upgraded again, but it always stuck at 3% (Some reportings: Invalid Model, Invalid Device ID, The image is corrupt.). Many times to tried again, many other Roms, but the same error (stuck at 3%).
Tried via SD menthod, but not run.
Please show me the way to fix.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2807194&postcount=485

stylez said:
http://forum.xda-developers.com/showpost.php?p=2807194&postcount=485
Click to expand...
Click to collapse
Thanks so much, but the device can't connect with with PC via Active Sync, cause when i power on, it stuck at HTC logo. Still can't use the T-Mobile Dash.
Something in bootloader:
Excalibur wifi
ONBL 1.10.0000
Excalibur
SPL 1.10.0000
I did try to upgrade SPL 1.11.0000 but not cuccess.

nhathoa said:
Thanks so much, but the device can't connect with with PC via Active Sync, cause when i power on, it stuck at HTC logo. Still can't use the T-Mobile Dash.
Something in bootloader:
Excalibur wifi
ONBL 1.10.0000
Excalibur
SPL 1.10.0000
I did try to upgrade SPL 1.11.0000 but not cuccess.
Click to expand...
Click to collapse
Hard-reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If no luck:
NRG: Turn your phone completely off. Pushing the camera button in, plug in your usb cable. The tricolor, bootloader screen will come up and you can flash your regular OEM ROM which can be downloaded from one of the stickies.
Click to expand...
Click to collapse

nhathoa said:
Full unlocked (ApplicationUnlock, USPL,)
When upgraded to 6.1, it stucked at 98% and the upgrade tool reported: Something happened with Flash Writer.
Then I enter to Bootloader, run upgraded again, but it always stuck at 3% (Some reportings: Invalid Model, Invalid Device ID, The image is corrupt.). Many times to tried again, many other Roms, but the same error (stuck at 3%).
Tried via SD menthod, but not run.
Please show me the way to fix.
Click to expand...
Click to collapse
why are you helping your brother out anyways? he should be the one doing it and leave you out of it.
or are you trying to put your brother as a front for yourself?

... your regular OEM ROM which can be downloaded from one of the stickies.
Click to expand...
Click to collapse
Sorry, i don't understand: What is OEM ROM ?

[email protected] said:
why are you helping your brother out anyways? he should be the one doing it and leave you out of it.
or are you trying to put your brother as a front for yourself?
Click to expand...
Click to collapse
please please...

nhathoa said:
Sorry, i don't understand: What is OEM ROM ?
Click to expand...
Click to collapse
Means stock ROM so you want the branded ROM your phone came with http://forum.xda-developers.com/showthread.php?t=381726

nhathoa said:
Sorry, i don't understand: What is OEM ROM ?
Click to expand...
Click to collapse
OEM rom is the orginal rom that came with the device which you could go to the tmobile website and find....um u cannot store the roms on your SD card you have to run it from you CPU and have your fone connected via usb and run the rom u cant save the rom to ur fone/storage card it wont work..i booted 4 roms in one day and never had a problem.

stylez said:
Means stock ROM so you want the branded ROM your phone came with http://forum.xda-developers.com/showthread.php?t=381726
Click to expand...
Click to collapse
you beat me to it

Thanks,I did try them:
1.22.531.6 (T-Mobile USA, WM6)
1.22.531.4 (T-Mobile USA, WM6)
1.11.531.1 (T-Mobile USA, WM5)
Dash_Software_Update_1.22.531.8_2.exe (download from T-Mobile site)
But, the same result: Stuck at 3%, auto reset device, then stuck at HTC Logo.

nhathoa said:
Thanks,I did try them:
1.22.531.6 (T-Mobile USA, WM6)
1.22.531.4 (T-Mobile USA, WM6)
1.11.531.1 (T-Mobile USA, WM5)
Dash_Software_Update_1.22.531.8_2.exe (download from T-Mobile site)
But, the same result: Stuck at 3%, auto reset device, then stuck at HTC Logo.
Click to expand...
Click to collapse
maybe your phone is f'ed up try to go to tmobile and have them exchange it say that the oem rom stopped working but dont tell them that you tried to flash to a different rom just say you were playing with it and it messed up so you went to their website to try to flash the rom again but it wouldnt work, they could probably help you better or yet exchange for a refurbished one

[email protected] said:
maybe your phone is f'ed up try to go to tmobile and have them exchange it say that the oem rom stopped working but dont tell them that you tried to flash to a different rom just say you were playing with it and it messed up so you went to their website to try to flash the rom again but it wouldnt work, they could probably help you better or yet exchange for a refurbished one
Click to expand...
Click to collapse
This device is in Viet Nam (means: sim unlocked)
Thanks foe your help.

http://forum.xda-developers.com/showthread.php?t=415225

Need Help... Anyone?

nhathoa said:
Need Help... Anyone?
Click to expand...
Click to collapse
No thanks, I am doing pretty good right now.

cswroe said:
No thanks, I am doing pretty good right now.
Click to expand...
Click to collapse
haha just rub it in his face

to NhatHoa: i also like your phone too bad,you have to have a solution yet ?????????????????plzzz
I'm Vietnamese @[email protected]!

first thing troubleshoot
hard reset
check drivers
active sync re install
should fix the problem

bgtvfr said:
first thing troubleshoot
hard reset
check drivers
active sync re install
should fix the problem
Click to expand...
Click to collapse
I checked all but still as bad as isn't hard reset I waiting save keep it !! Pro?Masters?Help me,plzzzz

Error when updating to 6.1 please help! (i wannt be cool :p )

yeah ive tried a bunch i couldnt get it to go. and dont worry about the active sync with the wing. it reverts to that when the dash disconnects. also the dash goes to the white screen. the main reason i want 6.1 is because i want do use a 4gb sd card. and my phone is sda unlocked. please help!
it says connection error....but its connected to the computer.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

vista or xp
i have had probs like this usin vista

pugwash001 said:
i have had probs like this usin vista
Click to expand...
Click to collapse
yeah i wish someone could help me out.

trexxcrap2 said:
yeah i wish someone could help me out.
Click to expand...
Click to collapse
maybe try doing a hard reset

s1l3nt said:
maybe try doing a hard reset
Click to expand...
Click to collapse
didnt work :/

Did you do both Surreal and SDA unlock? What about USPL...
Followed all the possible guides?

Capitan Totti said:
Did you do both Surreal and SDA unlock? What about USPL...
Followed all the possible guides?
Click to expand...
Click to collapse
i dontt know what surreal unlock is or what uspl is...can you help me out? i thought you just sda unlocked and click auto in the 6.1 folder and did what the command line says.

http://wiki.xda-developers.com/index.php?pagename=HTC_Excalibur_WM61
Don't know if that is why you can't flash, but it could be. Look around the guides more too.
Read it and you will find both Surreal and SDA links download.

Capitan Totti said:
http://wiki.xda-developers.com/index.php?pagename=HTC_Excalibur_WM61
Don't know if that is why you can't flash, but it could be. Look around the guides more too.
Read it and you will find both Surreal and SDA links download.
Click to expand...
Click to collapse
thanks for the link. has anyone ever seen this error when it shouldnt happen? (ie. the dash is really connected and on) id love to figure this out i want 6.1 so bad after reading everything about it.

Hope this helps
http://forum.xda-developers.com/showthread.php?t=415225

orb3000 said:
Hope this helps
http://forum.xda-developers.com/showthread.php?t=415225
Click to expand...
Click to collapse
thats what i read for steps to upgrade...but i still get the error no matter what i try. ive upgraded to cooked roms before (when 6.0 first came out) and then switched to the tmo 6.0 rom but i cant get 6.1 to load.

And as you can see, that guide is kind of not 100% accurate since it does not have the Surreal unlock.
The not passing over 3% issue has been dealt with many times.
SDA unlock it from desktop, download the Surreal, pass it in the File Explorer. Go on the phone itself, of course without ever detaching it from the cable in active sync, and install the .cab. restart the phone, I personally flashed it with a USPL thing, I guess I did an extra step that was not needed, so technically at this point, you should select the RUU like say Kavana, and it should work. Let it do its thing even when rebooting... I know it looks like its taking too long at times... but just set it down and go drink a coffee or something then come back. Once it starts normally, I didn't have to setup anything, unlike what the guide says, but its best you do it anyway from connection setup and choose USA >T-Mobile, if that is what you have of course. Then for MMS just look at one of my threads, I helped some guys just as opf recent. You will see all the info you need.

Capitan Totti said:
And as you can see, that guide is kind of not 100% accurate since it does not have the Surreal unlock.
The not passing over 3% issue has been dealt with many times.
SDA unlock it from desktop, download the Surreal, pass it in the File Explorer. Go on the phone itself, of course without ever detaching it from the cable in active sync, and install the .cab. restart the phone, I personally flashed it with a USPL thing, I guess I did an extra step that was not needed, so technically at this point, you should select the RUU like say Kavana, and it should work. Let it do its thing even when rebooting... I know it looks like its taking too long at times... but just set it down and go drink a coffee or something then come back. Once it starts normally, I didn't have to setup anything, unlike what the guide says, but its best you do it anyway from connection setup and choose USA >T-Mobile, if that is what you have of course. Then for MMS just look at one of my threads, I helped some guys just as opf recent. You will see all the info you need.
Click to expand...
Click to collapse
awsome thank you. ill try when i get home. if i cant get it to work how do i get a 4gb micro sd card to work on 6.0?

Dude, just... get 6.1. Its easy.

Capitan Totti said:
Dude, just... get 6.1. Its easy.
Click to expand...
Click to collapse
it'd be great if i could get it to work!

trexxcrap2 said:
it'd be great if i could get it to work!
Click to expand...
Click to collapse
Its very simple man.
There are even videos on youtube on how to.

Capitan Totti said:
Its very simple man.
There are even videos on youtube on how to.
Click to expand...
Click to collapse
yes jus type in kavana 6.1 in youtube shows u how to install it wit kavana rom

And don't forget USPL- CID BYPASS, then flash it.
I am gonna write a guide because seriously, the ones that are there are not good, especially for noobs who got 765 questions.

s1l3nt said:
yes jus type in kavana 6.1 in youtube shows u how to install it wit kavana rom
Click to expand...
Click to collapse
Yes, even though some are better than others. I am gonna write the best guide... noobs will be like "well... all has been answered soo... ok".

Capitan Totti said:
Yes, even though some are better than others. I am gonna write the best guide... noobs will be like "well... all has been answered soo... ok".
Click to expand...
Click to collapse
lols well for dat to happen da guide is gonna be extremely long

Help me nexus 7 2013 os not installed

OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.

epicmoi44 said:
OK so I formatted my device through twrp after having kernels fail on me then I go to boot up the device and nothing happens , I go to
recovery mode then i check i have nothing in my sdcard / storage and when i go to reboot it says "No OS Installed".
Please help me I can't return the device since the bootloader is locked and i can't go into developer mode and enable USB debugging.
Click to expand...
Click to collapse
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest

THANK YOU
hnk1 said:
can you boot in bootloader mode? (turn off device and then hold power+down key)
use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
jus sit back and it would do the rest
Click to expand...
Click to collapse
omg thank you so much , you saved my device!!!!

Another problem
Hnk1 said:
Can you boot in bootloader mode? (Turn off device and then hold power+down key)
Use wugfresh tool kit and you can solve all problems easily. Find the kit in general section!
Just plug in device and select restore nexus and select, nexus is bricked/bootloop
Jus sit back and it would do the rest
Click to expand...
Click to collapse
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.

epicmoi44 said:
Dude after I got everything software wise fixed , I see a white flashes behind everything
I can see my lockscreen and etc. but theres a annoying flash behind it.
Click to expand...
Click to collapse
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?

Hnk1 said:
Can you send me some screenshots ?
Hold power+volume down while device is on for screenshots!
Well, I'm not sure if it is light bleed or some software issue!
Secondly did you have this white flash light before or it just came ?
Click to expand...
Click to collapse
No it came after the after I finish rebooting after restoring to stock rom.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

epicmoi44 said:
No it came after the after I finish rebooting after restoring to stock rom.
Click to expand...
Click to collapse
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?

martin 107
Hnk1 said:
I saw your image, I can't seem to see any white line!
Are you referring to Google now ? The white line with a mic icon on the end?
Can you use a reference point in your image to specify ?
Click to expand...
Click to collapse
Its more like glows than lines

epicmoi44 said:
Its more like glows than lines
Click to expand...
Click to collapse
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!

Hnk1 said:
Well, I am afraid you need to explain in details what exactly is happening.
You can use Google translate to translate in English if you are having troubles expressing it. Make sure you use full form/ standard language of your language or it would not be accurate translation!
Click to expand...
Click to collapse
Lol I speak english don't worry , anyways the problem seemed to fixed on its own I let it drain the whole day and it pretty much fixed the problem.
Thanks anyways

I thought it was a ESL post as well. Must be texting speak. Sometimes I'll read back an Email to myself and think some prepositions and personal pronouns would really help these sentences LOL
For instance in the above sentence a 'that' before: some prepositions - would improve improve readability.
Sent from my Nexus 7 using XDA Free mobile app

A705W No OEM unlock...

Does this mean it is un-rootable?
Goddam but Virgin fones are a pissoff.
Should I return this phone?
Or is there any possibility of a way to fix this?

I learnt the same lesson. It's sad that carriers can restrict what we do with our phones here in north America while if you buy this same phone anywhere else in the world, it's rootable.
I've had mine a few months now and still no way of rooting.

try to flash a combination firmware that unlock OEM option :
https://combinationfirmware.com/downloads/a705wvlu2asi1/
or https://androidfilehost.com/?fid=1899786940962591760
or download this combination file in samfirm:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

BK said:
try to flash a combination firmware that unlock OEM option :
https://combinationfirmware.com/downloads/a705wvlu2asi1/
or https://androidfilehost.com/?fid=1899786940962591760
or download this combination file in samfirm:
View attachment 4891693
Click to expand...
Click to collapse
ok, so the idea is that I flash the combination file, go in to dev. settings and set OEM unlock, then reflash the phone with normal firmware, and carry on with rooting as normal? will this allow me to install twrp?
thank you for your reply, and thank you in advance for any info that helps!
Regards
Kevin

wyldnewbie said:
ok, so the idea is that I flash the combination file, go in to dev. settings and set OEM unlock, then reflash the phone with normal firmware, and carry on with rooting as normal? will this allow me to install twrp?
thank you for your reply, and thank you in advance for any info that helps!
Regards
Kevin
Click to expand...
Click to collapse
no , when you enabled dev settings, enable OEM unlock , then reboot to bootloader and unlock it , then u can root with magisk by patching the AP of the firmware you need

BK☑️ said:
no , when you enabled dev settings, enable OEM unlock , then reboot to bootloader and unlock it , then u can root with magisk by patching the AP of the firmware you need
Click to expand...
Click to collapse
BK,
Ok, I'm sure you're going to think I'm a retard, but I wanna be sure I understand correctly.
So i:
1)flash combination file
2) Boot phone up
3) enable developer settings
4) enter developer settings, and enable OEM unlock.
5) Ok, here is where I'm a little unsure of what you mean:
"Reboot to bootloader and unlock it"
6) root with magisk.
The number 5 slot (above) is what I am having trouble with....
And then I use my pc to root the AP of the proper firmware before I flash it with Odin on to the phone?
Wait..I'm getting that part wrong too, I think.... shoot
Oh gosh. I'm screwing this up. Please advise here too...
And will TWRP be possible afterwards?
Excuse my asking about what I'm sure is obvious....
I have rooted and enjoyed the results on several LG phones and my old tab4, and I would enjoy the same freedom with this phone, as I quite like it.
Thank you again for being willing to advise.
Regards
K

when you enabled OEM unlock , plug the phone to the computer, then restart the phone and directly press and hold volume up and down until you see a blue screen

what about a pit file? do we need one?
apparently im just lost i ended up getting an error that said
"please get the approval to use factory binaries (pit)"
how would i get past

aeonspace said:
what about a pit file? do we need one?
apparently im just lost i ended up getting an error that said
"please get the approval to use factory binaries (pit)"
how would i get past
Click to expand...
Click to collapse
Wow.. I got the same error, EXCEPT instead of (pit) I have (abl).
I mucked around for a bit with a cracked z3x for a bit, but it was an older version, and didnt have A705W listed.
I'm still game to try, but thought I'd see if somebody here had any advice....
Please help, if anyone can.
Thank you

I am kinda in the same position as you...
I've been wanting to root for a while but this oem unlock thing with my Virgin a705w is annoying
I don't really want to risk bricking my phone or whatever so I was hoping someone could do it first.
I found this website with pit files if they're any use: full-repair-firmware .com/p/galaxy-a70-sm-a705xx.html
(remove the space before the .com; I can't post links on xda)
pls let me know if you can get it working

BK☑️ said:
when you enabled OEM unlock , plug the phone to the computer, then restart the phone and directly press and hold volume up and down until you see a blue screen
Click to expand...
Click to collapse
Hey BK.
Thank you very much for your input!
I've only rooted my LG phones previously..
Samsung has a few more twists it seems!
I thought it might be worth asking you if you had any info on that error I mentioned below, the "please get approval to use factory binaries (abl) or (pit)" problem?
I've seen some stuff, applicable to the error ending in (pit), but have not seen anything referring to the (abl) version of the error, which is what I am experiencing....
Any advice you can give will be greatly appreciated....and by more than just me, I'm sure!
Thank you again
Kevin

wyldnewbie said:
Hey BK.
Thank you very much for your input!
I've only rooted my LG phones previously..
Samsung has a few more twists it seems!
I thought it might be worth asking you if you had any info on that error I mentioned below, the "please get approval to use factory binaries (abl) or (pit)" problem?
I've seen some stuff, applicable to the error ending in (pit), but have not seen anything referring to the (abl) version of the error, which is what I am experiencing....
Any advice you can give will be greatly appreciated....and by more than just me, I'm sure!
Thank you again
Kevin
Click to expand...
Click to collapse
did you tried generating pit with Z3x ?

wyldnewbie said:
Hey BK.
Thank you very much for your input!
I've only rooted my LG phones previously..
Samsung has a few more twists it seems!
I thought it might be worth asking you if you had any info on that error I mentioned below, the "please get approval to use factory binaries (abl) or (pit)" problem?
I've seen some stuff, applicable to the error ending in (pit), but have not seen anything referring to the (abl) version of the error, which is what I am experiencing....
Any advice you can give will be greatly appreciated....and by more than just me, I'm sure!
Thank you again
Kevin
Click to expand...
Click to collapse
If your A705W isn't listed , try A705FN if it's there, i dont have the canadian variant so i can't help like i would want to

you need this exact firmware A705WVLU2ASK1 , it can be found on GSM2FILE easily or others websites

SM-R800 NEW UPDATE - Build Number : R800XXU1FUB6Tizen version : Tizen 5.5.0.1Release Date : 2021-02-25

Thanks to @ciozvarda for pointing out this easy method to get the latest firmware.
It' works great by the way!
For those wishing to try it out follow the steps bellow:
ciozvarda said:
maybe this will help
https://www.reddit.com/r/GalaxyWatch/comments/luoj3i
I'm trying now
Click to expand...
Click to collapse
A new firmware is available for our SM-R800.. is there any link to download it?
Notify Update
Anyone who got this update can upload it and make a link available for us?
Thanks!

andrew.mackew said:
A new firmware is available for our SM-R800.. is there any link to download it?
Notify Update
Anyone who got this update can upload it and make a link available for us?
Thanks!
Click to expand...
Click to collapse
I'm from Portugal and did not get this update

It was launched for US and South Korea if I am not wrong. But I would like to install it if someone uploads the zip file.

Same here, would love to get this file, because my ota update does not work.

No update in Sweden yet...

maybe this will help
https://www.reddit.com/r/GalaxyWatch/comments/luoj3i
I'm trying now

ciozvarda said:
maybe this will help
https://www.reddit.com/r/GalaxyWatch/comments/luoj3i
I'm trying now
Click to expand...
Click to collapse
Great tutorial, but as I understand it after updating it will not be possible to return to the previous CSC, in my case ZTO, losing important functions like Samsung Pay.

I am not an expert so I can not answer that question. But maybe after the update follow the tutorial again and change back to your csc? I don't know if it will work...
LE: I don't use Samsung Pay so I don't mind if it's not working

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's working. Downloading now.

ciozvarda said:
I am not an expert so I can not answer that question. But maybe after the update follow the tutorial again and change back to your csc? I don't know if it will work...
LE: I don't use Samsung Pay so I don't mind if it's not working
Click to expand...
Click to collapse
The problem is that to go back to the previous CSC it will be necessary to downgrade again to change, so this will bring you back to ROM 4.0.0.7 when looking for an update

ciozvarda said:
View attachment 5236059
It's working. Downloading now.
Click to expand...
Click to collapse
Excellent! I'll probably try this..
I wonder if our fellow @adfree has any consideration regarding to save the downloaded cache firmware in order to be used for others. Or any clue if other CSC will be released anytime soon.

Oh. Just one thing.
I could not connect to the watch to use the sdb command. After searching online a little I found that the following settings should be in place before "sdb connect ....."
Bluetooth: Off, Wifi: On, Debugging: On, Developer Mode: On. Then restart watch.
I had bluetooth on and it didn't connect.

ciozvarda said:
Oh. Just one thing.
I could not connect to the watch to use the sdb command. After searching online a little I found that the following settings should be in place before "sdb connect ....."
Bluetooth: Off, Wifi: On, Debugging: On, Developer Mode: On. Then restart watch.
I had bluetooth on and it didn't connect.
Click to expand...
Click to collapse
Thanks for the heads up

Hi all.. this is my tutorial
Ill add the turning bluetooth off thing right now ..
Yes you can redo this tutorial to re-change CSC as much as you want .. i havent heard Samsung changed anything to prevent us flashing signed firmware .

GeosJr said:
Great tutorial, but as I understand it after updating it will not be possible to return to the previous CSC, in my case ZTO, losing important functions like Samsung Pay.
Click to expand...
Click to collapse
Well thank you , ive tried my best to simplify this ordeal so more people can try/do it !

Djuganight said:
I'm from Portugal and did not get this update
Click to expand...
Click to collapse
hemeyus said:
Same here, would love to get this file, because my ota update does not work.
Click to expand...
Click to collapse
Hi guys , follow my tutorial to change CSC region to XAR (usa) .. you will receive the update OTA and samsung pay of you dont already have it .
https://www.reddit.com/r/GalaxyWatch/comments/luoj3i
Ill answer any question..

@andrew.mackew
To catch the Delta files aka FOTA inkremental crap... is no Rocket Science...
But few problems...
A
To start FOTA update routine from Watch you need Root...
B
No idea why...
I did this way few times with GWA2... SM-R820 successfully...
But failed with my SM-R500...
C
Dump from device is not easy... AND require tooo much time and Energy to do this for every Firmware...
D
To find way to start from Phone the FOTA process...
Would be coooooool...
Old experiments successfully years ago... with ROOTed Phone...
E
No checked...
Chance for Leak increase if more CSC released...
SM-R500 also only KOO and XAR...
So wait is safe...
Best Regards

ciozvarda said:
View attachment 5236059
It's working. Downloading now.
Click to expand...
Click to collapse
Any first impressions? How is the overall speed and battery life?

No bugs until now. Battery seems to be a little better. 20% left and it says 14 hours. Overall speed very good.
A good update.

ciozvarda said:
No bugs until now. Battery seems to be a little better. 20% left and it says 14 hours. Overall speed very good.
A good update.
Click to expand...
Click to collapse
Great, and what news about samsung pay?