Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
perkins.reid27 said:
Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
Click to expand...
Click to collapse
Ensure CM10 and gapps is on an external sd card. wipe system, data, cache, and dalvik. Then reinstall cm10 and gapps (respectively in this order) and then reboot.
aybarrap1 said:
Ensure CM10 and gapps is on an external sd card. wipe system, data, cache, and dalvik. Then reinstall cm10 and gapps (respectively in this order) and then reboot.
Click to expand...
Click to collapse
I'm a noob. I need a step by step. So the logo is there spinning, do i take the battery out? Plug it into computer? I'm lost..
perkins.reid27 said:
Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
Click to expand...
Click to collapse
Are you an at&t (i747) or a i9100.
Two different things... Not trying to sound like a jerk but that could seriously mess your phone up.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Are you an at&t (i747) or a i9100.
Two different things... Not trying to sound like a jerk but that could seriously mess your phone up.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No problem. Umm well i bought from At&t, (AT&T logo on back) bout when i plug it into my computer it's called i9100.
perkins.reid27 said:
No problem. Umm well i bought from At&t, (AT&T logo on back) bout when i plug it into my computer it's called i9100.
Click to expand...
Click to collapse
The i9100 is the s2 not the s3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
The i9100 is the s2 not the s3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Oh.. well what do i do? And also i found an message and at the bottom it says "Sent from my SAMSUNG-SGH-I747 using xda app-developers app"
perkins.reid27 said:
Oh.. well what do i do? And also i found an message and at the bottom it says "Sent from my SAMSUNG-SGH-I747 using xda app-developers app"
Click to expand...
Click to collapse
Settings > about phone > model number
xBeerdroiDx said:
Settings > about phone > model number
Click to expand...
Click to collapse
I can't? It's just looping the CyanogenMod boot..?
Okay you have galaxy s3 for sure ?
What steps did you follow to flash cyanogenmod? Can you get into recovery?
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
Okay you have galaxy s3 for sure ?
What steps did you follow to flash cyanogenmod? Can you get into recovery?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes, i'm 100% sure. I downloaded CWM as my root. Then on my computer i downloaded gapps from the link given at http://phonerebel.com/how-to-instal...alaxy-s3-4-2-1-sprintattt-mobileverizon-siii/
The cyanogenmod link didn't work for me on that website so i looked through the forums and found this thread. http://forum.xda-developers.com/showthread.php?t=1778270
After i read it, i followed this link http://get.cm/?device=d2att and clicked the one at the top to download to my computer. But it didn't work. So i visited the forum on my phone and downloaded straight to my phone. I made a folder on my SD called CyanogenMod, put the both of the files in there. Then i powered down my device, and activated recovery mode. I selected install zip twice, installing both files, then hit reboot. Then the CyanogenMod logo pops up, and now hasn't gone away.
perkins.reid27 said:
Yes, i'm 100% sure. I downloaded CWM as my root. Then on my computer i downloaded gapps from the link given at http://phonerebel.com/how-to-instal...alaxy-s3-4-2-1-sprintattt-mobileverizon-siii/
The cyanogenmod link didn't work for me on that website so i looked through the forums and found this thread. http://forum.xda-developers.com/showthread.php?t=1778270
After i read it, i followed this link http://get.cm/?device=d2att and clicked the one at the top to download to my computer. But it didn't work. So i visited the forum on my phone and downloaded straight to my phone. I made a folder on my SD called CyanogenMod, put the both of the files in there. Then i powered down my device, and activated recovery mode. I selected install zip twice, installing both files, then hit reboot. Then the CyanogenMod logo pops up, and now hasn't gone away.
Click to expand...
Click to collapse
Ah sounds like a soft brick and nothing to get to worried about. If you can get back into recovery then I suggest you reflash the ROM and the gapps. Now you are linking posts to two different versions of CyanogenMOD. 10.1 is for android 4.2.2 and 10 is 4.1.2. Make sure you download Gapps for 4.2.2 and cyanogenmod 10.1.
http://get.cm/?device=d2att
for 10.1
and
http://goo.im
for 4.2.2 gapps
hednik said:
Ah sounds like a soft brick and nothing to get to worried about. If you can get back into recovery then I suggest you reflash the ROM and the gapps. Now you are linking posts to two different versions of CyanogenMOD. 10.1 is for android 4.2.2 and 10 is 4.1.2. Make sure you download Gapps for 4.2.2 and cyanogenmod 10.1.
http://get.cm/?device=d2att
for 10.1
and
http://goo.im
for 4.2.2 gapps
Click to expand...
Click to collapse
Okay so i got it into recovery. What EXACTLY should i do? Wipe cache, wipe data? Reboot system now, reinstall the zips? Cause isn't it a bad rom for my phone that caused this?
perkins.reid27 said:
Okay so i got it into recovery. What EXACTLY should i do? Wipe cache, wipe data? Reboot system now, reinstall the zips? Cause isn't it a bad rom for my phone that caused this?
Click to expand...
Click to collapse
If you really want to be careful just download 10.1 and the Gapps for 4.2.2 put those on your SD card in that same folder (delete old ones of course) and reflash again.
Flashing a ROM for i747 or d2att even if it s bad download won't do any permanent damage any way.
You will be good to go. Just so you know is nearly impossible to hard brick the galaxy s3 unless you flash a international ROM. Anything listed in this device specific forum won't hurt your device.
Wipe cache, davlik cache (located in advanced), factory reset, and format system if you like but its not necessary. After first successful boot, reboot into recovery and make a backup.
P.S. Make sure you hit thanks to the guys who helped you earlier in the post as well
hednik said:
If you really want to be careful just download 10.1 and the Gapps for 4.2.2 put those on your SD card in that same folder (delete old ones of course) and reflash again.
Flashing a ROM for i747 or d2att even if it s bad download won't do any permanent damage any way.
You will be good to go. Just so you know is nearly impossible to hard brick the galaxy s3 unless you flash a international ROM. Anything listed in this device specific forum won't hurt your device.
P.S. Make sure you hit thanks to the guys who helped you earlier in the post as well
Click to expand...
Click to collapse
I will. But how do i download to my SD? Like i'm sure that my computer isn't recognizing my phone
Okay so i wiped all you told me to do, yet the cyanogenmod logo is still there.
perkins.reid27 said:
I will. But how do i download to my SD? Like i'm sure that my computer isn't recognizing my phone.
Click to expand...
Click to collapse
Do you have an external card ?
If not try this: Just flash the ROM and not the gapps. You wont have google apps but your phone will boot and then you can download the gapps on your phone. It is doesn't boot you need a sd card or flahs with odin back to stock. Did you make a backup of your stock ROM before you flashed CM 10 ?
hednik said:
Do you have an external card ?
If not try this: Just flash the ROM and not the gapps. You wont have google apps but your phone will boot and then you can download the gapps on your phone. It is doesn't boot you need a sd card or flahs with odin back to stock. Did you make a backup of your stock ROM before you flashed CM 10 ?
Click to expand...
Click to collapse
Probably not. Okay i just rewiped everything, (i found out i put the files on the SD main, not external) rebooted my phone, now it's loading in CyanogenMod.
perkins.reid27 said:
Probably not. Okay i just rewiped everything, (i found out i put the files on the SD main, not external) rebooted my phone, now it's loading in CyanogenMod.
Click to expand...
Click to collapse
What version of CyanogenMod did you have ? 10.1 or 10 ?
hednik said:
What version of CyanogenMod did you have ? 10.1 or 10 ?
Click to expand...
Click to collapse
Settings>About phone>CyanogenMod version>10.1-2013402
& it appears that i have the play store, and google apps. Whcih google apps should there be?
perkins.reid27 said:
Settings>About phone>CyanogenMod version>10.1-2013402
& it appears that i have the play store, and google apps. Whcih google apps should there be?
Click to expand...
Click to collapse
If you have the Play Store, then it flashed the Gapps.
Related
hi,
i have been a user od the cm 9 i wanted to try the aokp rom. so i downloaded the gapps and the rom itself.i put the files on my sd card and went into recovery.in recovery i did a factory reset,formated the system, wiped the cache and the dalvik. the i flashed the rom and gapps. but when i reboot it the phone is stuck in the boot animation and all ic can see ist the s3 logo. when i flash the aokp file i feel like its installing to fast .the phone says that the installation ist complete but i think it went to fast . i really dont know what im doing wrong. i totally listened to the instructions. i would appreciate any help
thxs
chilelrn1f said:
hi,
i have been a user od the cm 9 i wanted to try the aokp rom. so i downloaded the gapps and the rom itself.i put the files on my sd card and went into recovery.in recovery i did a factory reset,formated the system, wiped the cache and the dalvik. the i flashed the rom and gapps. but when i reboot it the phone is stuck in the boot animation and all ic can see ist the s3 logo. when i flash the aokp file i feel like its installing to fast .the phone says that the installation ist complete but i think it went to fast . i really dont know what im doing wrong. i totally listened to the instructions. i would appreciate any help
thxs
Click to expand...
Click to collapse
it sounds like a bad download...when aokp is installing in recovery it should take anywhere from 15 to 20 sec same with gapps. i would redownload off the computer and stick it on the root of your sdcard... hopefully u had a backup. also what recovery are u using??? I recommend twrp it is very user friendly and also mounts ext sdcard. some of the recovery for this phone is finnicky.... twrp gives me no problems
sarni84 said:
it sounds like a bad download...when aokp is installing in recovery it should take anywhere from 15 to 20 sec same with gapps. i would redownload off the computer and stick it on the root of your sdcard... hopefully u had a backup. also what recovery are u using??? I recommend twrp it is very user friendly and also mounts ext sdcard. some of the recovery for this phone is finnicky.... twrp gives me no problems
Click to expand...
Click to collapse
thank you
so i will download it again and try it one more time.
i do have a backup =) an im using clockwork recovery.and what do you mean with :i would redownload off the computer and stick it on the root of your sdcard.
I got this issue coming back from aokp I just had to install tw kernel maybe u just need aosp kernel
Sent from my SGH-T999 using Tapatalk 2
ebatr8 said:
I got this issue coming back from aokp I just had to install tw kernel maybe u just need aosp kernel
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Not the case... redownload and try again...
Sent from my SGH-T999 using Tapatalk 2
capcanuck said:
Not the case... redownload and try again...
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
i redownloaded it a few times but it still did not wokr( i have a t-mobile galaxy s3 and live in germany) i used these site for the downloads: http://aokp.co/index.php/releases/_/jellybean-build-1-r28 for the rom and http://forum.xda-developers.com/showthread.php?t=1798981 for the gapps
by the way i tied to install cm10 and it perfectly worked, if this helps
Hey guys, I'm really new to rooting, flashing roms, and Android in general (I've used iOS since 2007 until a month ago... please have mercy on my soul). I have an AT&T GN2 that I would like to remove the bloatware from, hence why I began investigating rooting, but it's snowballed into my desire to try out some of the amazing ROMs that the developers here have produced. Since the Note 2 uses the Exynos 4, I rooted using the ExynosAbuse exploit and downloaded Titanium Backup to freeze the AT&T apps. So far, so good.
However, I am wanting to get into how to flash custom ROMs, like CyanogenMod, so I downloaded the CWM RomManager and flashed the CWM Recovery. I downloaded the CyanogenMod 10.1 release for the i317 model (here: http://forum.xda-developers.com/showthread.php?t=2024495) and the latest gApps package (for 4.2.1), and flashed both from CWM RomManager. When it rebooted, it showed the CyanogenMod boot screen, but it appears to be stuck there. I'm not sure what to do at this point, and am hoping I didn't brick my phone. Is there anything I can do at this point?
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Have you changed kernel???
Sent from my MT11i using xda app-developers app
id10terrordfw said:
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
When I booted into recovery, I got the CWM recovery (which is a good thing, I suppose). I wiped the cache, and then installed the CM 10.1 zip and gApps zip. However, I think I still need to wipe data/factory reset, right?
So, at this point, I've:
1. Rooted the device using Chainfire's ExynosAbuse apk (super easy).
2. Installed RootChecker (success) and TI backup (froze bloatware apps).
3. Downloaded CWM RomManager.
4. Flashed CWM Recovery.
5. Downloaded CM 10.1 port for i317 (the AT&T GN2 model) and the 4.2.1 gApps zips.
6. Chose to install ROM from SD card in RomManager, added both CM 10.1 and gApps, and only selected install (did not wipe cache or user data at this point).
7. Received blue CyanogenMod boot screen... excited... but it remains on the boot screen. Sad face.
8. Removed battery to power the device off, placed battery back in, and then booted into recovery mode (CWM recovery).
9. Installed the CM 10.1 zip and gApps zip from SD, then wiped cache.
10. ???
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Peleus16 said:
Have you changed kernel???
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
This is a great point, at no point op has mentioned kernel.
Sent from my SAMSUNG-SGH-I317 using xda premium
cdshepherd said:
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
NowhereOutThere said:
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
Click to expand...
Click to collapse
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
NowhereOutThere said:
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
Click to expand...
Click to collapse
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
NowhereOutThere said:
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
Click to expand...
Click to collapse
Plug it into your computer and see if you can mount your internal sd. If you can download a new rom to your computer and transfer it to sd. Did you make a backup before flashing?
Im just running stock rooted for now.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Well, I'm downloading CleanROM right now. I also downloaded another cm 10.1 file just in case, perhaps it's because I downloaded it on the mobile Chrome browser that I'm having problems? I also downloaded a kernel from the thread to help with performance. However, if I can't get these on the phone, it doesn't matter. Since I'm on a Mac, I have to use Android File Transfer, and it isn't registering my phone, unfortunately. I may have to go out and buy a cheap SD card and throw the files on there. It may not hurt to have one around, anyways.
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
No... I thought that a backup of the original ROM was made when flashing CWM recovery, but I am a noob and that did not happen. Unfortunately, the browser doesn't even work! So I cannot text myself the link for the download. I should be able to flash a zip file from a micro sdhc, right?
Flash the right GAPPS, the crashing keyboard is a symptom of incorrect GAPPS. The December one is for 4.2.1 only, which is what CM10.1 is based on. Make sure you flash the right GAPPS with the right CM version.
Sent from my GT-N7105 using xda premium
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
ManelScout4Life said:
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
Click to expand...
Click to collapse
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Just grab goo manager from the market and dl the correct gapps to your phone. Either that or use your phones browser. No need for a pc. Boot in recovery, wipe cache and dalvik and flash correct gapps. Should be gtg.
Edit: just saw your browser isn't working. Goo manager's your best bet. Could always try another browser from the market as well. Good luck.
NowhereOutThere said:
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Click to expand...
Click to collapse
While in recovery plug usb into computer (make sure drivers are installed) in recovery menu navigate to mount usb storage. See if that works
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Hello, Just flashed CM10 after wiping data/factory reset, wipe cache, wtc.. I installed the latest GApps JB-2012121, and my AOSP Keyboard keeps crashing.. Like.. every few seconds.. I read to download another older versions of the GApps.. So I'm trying JB-20121011, and now.. My SD card is all jacked.. Using windows, it shows the correct space available.. but when I try and open it.. There is nothing there. I tried placing a Swype.apk in the SD card root.. but it won't show up on the File Manager..
So, what do? Anyone know where the External SD is using the CM10 File Manager?
Leejin said:
Hello, Just flashed CM10 after wiping data/factory reset, wipe cache, wtc.. I installed the latest GApps JB-2012121, and my AOSP Keyboard keeps crashing.. Like.. every few seconds.. I read to download another older versions of the GApps.. So I'm trying JB-20121011, and now.. My SD card is all jacked.. Using windows, it shows the correct space available.. but when I try and open it.. There is nothing there. I tried placing a Swype.apk in the SD card root.. but it won't show up on the File Manager..
So, what do? Anyone know where the External SD is using the CM10 File Manager?
Click to expand...
Click to collapse
Great.. So now I can't even do ANYTHING. I wiped factory data again.. Flashed a JB-20120706 Version of GApps.. and still NOTHING.. I can't get into the OS because it's asking for Google account.. then if I cancel that, it asks for a name.. I can't get around it.. Keyboard will NOT WORK.
Update:
Bricked..
I got sick of dealing with CM10 "Stable" (Har HAr) so I tried to again.. factory wipe and flash JellyBam 5.1.. Dear god.. everything went smooth.. Then on Reboot.. BAM.. Black Screen... Nothing.. No amount of battery pulls, holding power does ANYTHING.
So.. I've ruined my phone? I followed instructions to a T.
Any way of recovering it?
Can you access recovery or download mode?
Sent from my SGH-I747M
Leejin said:
Update:
Bricked..
I got sick of dealing with CM10 "Stable" (Har HAr) so I tried to again.. factory wipe and flash JellyBam 5.1.. Dear god.. everything went smooth.. Then on Reboot.. BAM.. Black Screen... Nothing.. No amount of battery pulls, holding power does ANYTHING.
So.. I've ruined my phone? I followed instructions to a T.
Any way of recovering it?
Click to expand...
Click to collapse
Get in download or recovery. Wipe all and flash stock with Odin. You can build back up from there.
Btw, cm10 is stable. Perhaps you flashed the wrong one or some changes was made that didn't go so well. Either way, it should work after going back to stock.
Sent from my SGH-I747 using xda app-developers app
Mr Patchy Patch said:
Can you access recovery or download mode?
Sent from my SGH-I747M
Click to expand...
Click to collapse
Nope.. It's Toast. I don't have a Jig either.. But plan on throwing one together after work..
I figured out what I did though..
I flashed the i9000 version of the JellyBAM ROM, not the D2ATT version.. Damn..
a $600 mistake.. So bummed.
BWolf56 said:
Get in download or recovery. Wipe all and flash stock with Odin. You can build back up from there.
Btw, cm10 is stable. Perhaps you flashed the wrong one or some changes was made that didn't go so well. Either way, it should work after going back to stock.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No download or Recovery.. It's TOAST.
I'm gonna make a Jig after work tonight.
I was wondering how in the hell do i get updated to all the new updates and such.
Currently i'm rooted with Twrp 2.3.1.0, i used the toolkit back some time ago and game me the option to basically install custom roms and such but never did anything except for a kernel.
So my question is Im still on LJC, 4.1.1, and i'm sick of the pop ups for the install update, and i know its going to fail so i'd figure can i just install a custom rom and it will take care of all that crap like for instance just go ahead and start fresh and install CyanogenMod?
XxLostSoulxX said:
I was wondering how in the hell do i get updated to all the new updates and such.
Currently i'm rooted with Twrp 2.3.1.0, i used the toolkit back some time ago and game me the option to basically install custom roms and such but never did anything except for a kernel.
So my question is Im still on LJC, 4.1.1, and i'm sick of the pop ups for the install update, and i know its going to fail so i'd figure can i just install a custom rom and it will take care of all that crap like for instance just go ahead and start fresh and install CyanogenMod?
Click to expand...
Click to collapse
That could be an option if you're looking to move over to AOSP but if you wanted to stick with TW you could always just flash a ROM based off stock 4.1.2, MA7 or MC2.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
That could be an option if you're looking to move over to AOSP but if you wanted to stick with TW you could always just flash a ROM based off stock 4.1.2, MA7 or MC2.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Well i tried to install CM 10 getting stuck at bootani its seriously pissing me off. i wiped everything and followed directions and nothing is working
XxLostSoulxX said:
Well i tried to install CM 10 getting stuck at bootani its seriously pissing me off. i wiped everything and followed directions and nothing is working
Click to expand...
Click to collapse
Will need more info, like your exact installation process to help you any further.
Sent from my SGH-T999 using xda premium
LuigiBull23 said:
Will need more info, like your exact installation process to help you any further.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Just tried rootbox same thing gets as far as the boot ani then bam sits there
XxLostSoulxX said:
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Click to expand...
Click to collapse
When you say CM 10 I'm assuming you're referring to CM 10.1? If so make sure your using the correct gapps and if you still face issues I suggest redownloading the ROM and gapps through Goomanager, make sure the MD5 match up, and then fully wipe and flash again. Keep me updated.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
When you say CM 10 I'm assuming you're referring to CM 10.1? If so make sure your using the correct gapps and if you still face issues I suggest redownloading the ROM and gapps through Goomanager, make sure the MD5 match up, and then fully wipe and flash again. Keep me updated.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yess 10.1, and yes i did exactly as it says im uploading a youtube video for you to watch so you can see what im doing exactly.
Just followed Rootbox instructions as i just literally tried that rom out, and same results. i cant match the md5 as it skips it during install process as it says there is no md5 file
XxLostSoulxX said:
Click to expand...
Click to collapse
Thanks. I'll watch it and get back to you asap.
Sent from my Nexus 4 using xda premium
---------- Post added at 02:36 AM ---------- Previous post was at 02:06 AM ----------
XxLostSoulxX said:
Yess 10.1, and yes i did exactly as it says im uploading a youtube video for you to watch so you can see what im doing exactly.
Just followed Rootbox instructions as i just literally tried that rom out, and same results. i cant match the md5 as it skips it during install process as it says there is no md5 file
Click to expand...
Click to collapse
Ok I see what you're doing. My brother had a similar problem and there seems to be something wrong with the kernel script not running through properly and to fix this you will need to perform a factory reset as the OP instructs BUT I would try it twice. Once before the flash and another after the flash. Try it and if that doesn't work try the same steps with a 3rd party kernel. Flashing a kernel after the ROM is not recommended but if it helps to boot up the phone then you'll know it was the stock kernel. Let me know
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Thanks. I'll watch it and get back to you asap.
Sent from my Nexus 4 using xda premium
---------- Post added at 02:36 AM ---------- Previous post was at 02:06 AM ----------
Ok I see what you're doing. My brother had a similar problem and there seems to be something wrong with the kernel script not running through properly and to fix this you will need to perform a factory reset as the OP instructs BUT I would try it twice. Once before the flash and another after the flash. Try it and if that doesn't work try the same steps with a 3rd party kernel. Flashing a kernel after the ROM is not recommended but if it helps to boot up the phone then you'll know it was the stock kernel. Let me know
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
tried with 3rd party kernel i.e matrix kernel and nope still not working WTF.
XxLostSoulxX said:
tried with 3rd party kernel i.e matrix kernel and nope still not working WTF.
Click to expand...
Click to collapse
No AOSP ROMs at all? I would go back to complete stock, update to MA7 or MC2 then reroot and try flashing again.
Sent from my Nexus 4 using xda premium
XxLostSoulxX said:
Okay Well i wiped(factory reset under TWRP 2.5) then did advanced wipe and chose system option; then wiped. Then i had flashed CM10 then after flashed GApps, rebooted and bam into bootloop, and as i typing this i 'm doing the avatar rom and same thing bootloop. also i should mention it skips the md5 check and says there is no md5 file.
Just tried rootbox same thing gets as far as the boot ani then bam sits there
Click to expand...
Click to collapse
Wipe 3X. Data, System, cache, Dalvik.
Anything less and you're bound to get problems.
Skripka said:
Wipe 3X. Data, System, cache, Dalvik.
Anything less and you're bound to get problems.
Click to expand...
Click to collapse
i did; wiped data 3x, system 3x, cach and dalvik 3x, installed cm 10.1 then right after Gapps but again says skip md5 check there is no md5 file and bootloops on CM 10 boot animation
XxLostSoulxX said:
i did; wiped data 3x, system 3x, cach and dalvik 3x, installed cm 10.1 then right after Gapps but again says skip md5 check there is no md5 file and bootloops on CM 10 boot animation
Click to expand...
Click to collapse
Does it bootloop...or have you just been impatient? 1st boots of a new ROM can take a while.
Presuming it is stuck at boot splash...either an unstable build, or a corrupt download are possible. Verify the MD5 of your downloads.
Skripka said:
Does it bootloop...or have you just been impatient? 1st boots of a new ROM can take a while.
Presuming it is stuck at boot splash...either an unstable build, or a corrupt download are possible. Verify the MD5 of your downloads.
Click to expand...
Click to collapse
did you watch my video? it was sitting for 5 minutes,on the cyanogenmod boot animation.
i just restored and back on ljc perfectly fine. but i guess my phone does not like flashing as i said and in the video it hangs and skips the md5 check
okay i used Toolkit 4.1.0 and chose to flash to stock and it didnt work because i still have root and still on ljc, and same setup as before, i cant update to ma7, however i chose to install stock recovery, but i know if i do update it will fail.
EDIT: **** it wont even reboot to install the update. says rebooting now and nothing. F THIS PHONE.
I CANT EVEN UNROOT
XxLostSoulxX said:
did you watch my video? it was sitting for 5 minutes,on the cyanogenmod boot animation.
i just restored and back on ljc perfectly fine. but i guess my phone does not like flashing as i said and in the video it hangs and skips the md5 check
Click to expand...
Click to collapse
Every device handles things differently, including first boot up times. It can take anywhere from 5-10min. So don't worry about how short Josh's boot up time was in his video. I highly suggest you:
1) Wipe system, data, cache/dalvik 3x
2) flash ROM and Gapps
3) Go back and perform a "factory reset" 3x
4) Reboot
5) Let phone sit at most 15min.
Just do this one final time exactly as instructed and assuming you've tried earlier nighties, if it doesn't boot up by 15 min then you'll know it's the phone and NOT you.
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Every device handles things differently, including first boot up times. It can take anywhere from 5-10min. So don't worry about how short Josh's boot up time was in his video. I highly suggest you:
1) Wipe system, data, cache/dalvik 3x
2) flash ROM and Gapps
3) Go back and perform a "factory reset" 3x
4) Reboot
5) Let phone sit at most 15min.
Just do this one final time exactly as instructed and assuming you've tried earlier nighties, if it doesn't boot up by 15 min then you'll know it's the phone and NOT you.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
what do i do if its the phone? i cant even unroot, i cant even flash to stock WTF! tried using toolkit but nothing. only thing i accomplished was being able to install stock recovery, and went back into android and chose to reboot to install update from OTA wont even reboot when it says rebooting now.
XxLostSoulxX said:
what do i do if its the phone? i cant even unroot, i cant even flash to stock WTF! tried using toolkit but nothing. only thing i accomplished was being able to install stock recovery, and went back into android and chose to reboot to install update from OTA wont even reboot when it says rebooting now.
Click to expand...
Click to collapse
Ok... Do you still have that LJC nandroid backup?
Sent from my Nexus 4 using xda premium
LuigiBull23 said:
Ok... Do you still have that LJC nandroid backup?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
correct yeah because i restored so i can atleast use my phone to try to fix it using toolkit
EDIT: Hooray i finally got it that did the trick this time. however basband is still LJC but is 4.2.2 because i went through setup this time and was able to boot up
i forgot i unrooted my t989 and installed a ROM, i didnt back up and know its stuck on cyanogenmod load screen for a long time now. can some1 plz help me
How did you unroot and then flash a rom?
Sent from my SGH-T989 using xda app-developers app
Spastic909 said:
How did you unroot and then flash a rom?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
i just went into supersu and click fully unroot, then i followed instructions from this site http://www.teamandroid.com/2013/04/...3-android-422-jelly-bean-firmware-tutorial/2/
Which recovery are you using? You don't have to be rooted to flash a ROM. Try re-downloading the ROM and install it again.
meekrawb said:
Which recovery are you using? You don't have to be rooted to flash a ROM. Try re-downloading the ROM and install it again.
Click to expand...
Click to collapse
twrp, and i cant access the sdcard, i tryed so many times on reinstalling the rom, clearing the cache and stuff, it just stays on the cyanogenmod for a long time now
i just tryed cmw and didnt work either
Why did you start two threads on the same issue?
Sent from XDA app
gc84245 said:
Why did you start two threads on the same issue?
Sent from XDA app
Click to expand...
Click to collapse
i started 1 on the wrong model so some1 told me to come here than a moderator moved it here after i started this 1
shadowvox said:
twrp, and i cant access the sdcard, i tryed so many times on reinstalling the rom, clearing the cache and stuff, it just stays on the cyanogenmod for a long time now
i just tryed cmw and didnt work either
Click to expand...
Click to collapse
When you say you can't access the SD card, do you mean when you hook your phone up to the computer? Even when you go into TWRP mounts and storage and press mount USB storage? If you can't do that you are going to have to Odin flash the stock firmware with your PC.
meekrawb said:
When you say you can't access the SD card, do you mean when you hook your phone up to the computer? Even when you go into TWRP mounts and storage and press mount USB storage? If you can't do that you are going to have to Odin flash the stock firmware with your PC.
Click to expand...
Click to collapse
i got it working ty, it was a bad rom i guess so i downloaded the rom from this site and now its working