Related
hi,
i have been a user od the cm 9 i wanted to try the aokp rom. so i downloaded the gapps and the rom itself.i put the files on my sd card and went into recovery.in recovery i did a factory reset,formated the system, wiped the cache and the dalvik. the i flashed the rom and gapps. but when i reboot it the phone is stuck in the boot animation and all ic can see ist the s3 logo. when i flash the aokp file i feel like its installing to fast .the phone says that the installation ist complete but i think it went to fast . i really dont know what im doing wrong. i totally listened to the instructions. i would appreciate any help
thxs
chilelrn1f said:
hi,
i have been a user od the cm 9 i wanted to try the aokp rom. so i downloaded the gapps and the rom itself.i put the files on my sd card and went into recovery.in recovery i did a factory reset,formated the system, wiped the cache and the dalvik. the i flashed the rom and gapps. but when i reboot it the phone is stuck in the boot animation and all ic can see ist the s3 logo. when i flash the aokp file i feel like its installing to fast .the phone says that the installation ist complete but i think it went to fast . i really dont know what im doing wrong. i totally listened to the instructions. i would appreciate any help
thxs
Click to expand...
Click to collapse
it sounds like a bad download...when aokp is installing in recovery it should take anywhere from 15 to 20 sec same with gapps. i would redownload off the computer and stick it on the root of your sdcard... hopefully u had a backup. also what recovery are u using??? I recommend twrp it is very user friendly and also mounts ext sdcard. some of the recovery for this phone is finnicky.... twrp gives me no problems
sarni84 said:
it sounds like a bad download...when aokp is installing in recovery it should take anywhere from 15 to 20 sec same with gapps. i would redownload off the computer and stick it on the root of your sdcard... hopefully u had a backup. also what recovery are u using??? I recommend twrp it is very user friendly and also mounts ext sdcard. some of the recovery for this phone is finnicky.... twrp gives me no problems
Click to expand...
Click to collapse
thank you
so i will download it again and try it one more time.
i do have a backup =) an im using clockwork recovery.and what do you mean with :i would redownload off the computer and stick it on the root of your sdcard.
I got this issue coming back from aokp I just had to install tw kernel maybe u just need aosp kernel
Sent from my SGH-T999 using Tapatalk 2
ebatr8 said:
I got this issue coming back from aokp I just had to install tw kernel maybe u just need aosp kernel
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Not the case... redownload and try again...
Sent from my SGH-T999 using Tapatalk 2
capcanuck said:
Not the case... redownload and try again...
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
i redownloaded it a few times but it still did not wokr( i have a t-mobile galaxy s3 and live in germany) i used these site for the downloads: http://aokp.co/index.php/releases/_/jellybean-build-1-r28 for the rom and http://forum.xda-developers.com/showthread.php?t=1798981 for the gapps
by the way i tied to install cm10 and it perfectly worked, if this helps
Heyy everyone! i have a samsung sgh t989D (telus edition) and i tried to root it. I put CWM and Cyanogen on it via Rom Manager and when i started my phone up it wouldnt get past the boot screen so im stuck in a bootloop. I can get to the CWM recovery page but i dont know what i should and can do to get out of this boot loop. I backed up i phone when i was trying to use the samsung toolkit a while ago but i still dont want to lose my data. I also dont care for the rom or root anymore. So i guess im asking what the best way to unroot my phone would be. Also my phone disconnects itself from my computer at times (my laptop makes the noise that a usb has been unplugged) and im using the stock wire with a usb 2.0 port.
Can you get into download mode or CWM without it rebooting? If not, does it get partially through the boot process before going into an infinite bootloop and vibrating every few seconds? If so, you could be another victim of power button hardware failure.
bruddah said:
Heyy everyone! i have a samsung sgh t989D (telus edition) and i tried to root it. I put CWM and Cyanogen on it via Rom Manager and when i started my phone up it wouldnt get past the boot screen so im stuck in a bootloop. I can get to the CWM recovery page but i dont know what i should and can do to get out of this boot loop. I backed up i phone when i was trying to use the samsung toolkit a while ago but i still dont want to lose my data. I also dont care for the rom or root anymore. So i guess im asking what the best way to unroot my phone would be. Also my phone disconnects itself from my computer at times (my laptop makes the noise that a usb has been unplugged) and im using the stock wire with a usb 2.0 port.
Click to expand...
Click to collapse
Please please please tell me you did a NANDROID backup before making any changes after getting CWM on there!
If you did, you should be able to restore from backup when in CWM. If not... well... flash from an SD card?
KaneHusky said:
Can you get into download mode or CWM without it rebooting? If not, does it get partially through the boot process before going into an infinite bootloop and vibrating every few seconds? If so, you could be another victim of power button hardware failure.
Click to expand...
Click to collapse
What's this power button hardware failure? Is it common? I'm scaaaared now.....
sylikc said:
Please please please tell me you did a NANDROID backup before making any changes after getting CWM on there!
If you did, you should be able to restore from backup when in CWM. If not... well... flash from an SD card?
What's this power button hardware failure? Is it common? I'm scaaaared now.....
Click to expand...
Click to collapse
i can easily get to the clockwork recovery page and idk if i did a nandroid backup :S i used ROM manager to put CWM on my phone but before that i tried rooting with the samsung toolkit and that made me do some sort of backup i think so i might have but idk. what can i flash from an sd card? pretty much what happens when i start my phone is that it stays at the screen while its booting like the boot logo where the background is moving and stuff and i can turn my phone off and hold volume keys and get into CWM recovery
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
-SGA- said:
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
soo will that wipe everthing off of my phone? and thanks! i guesss ill just do that
try holding power 3 seconds then let go over and over then eventually it should boot into rom i do this alot
Yup, everything
Sent from my SGH-T989 using xda premium
richardlibeau said:
try holding power 3 seconds then let go over and over then eventually it should boot into rom i do this alot
Click to expand...
Click to collapse
approximately how many times do you do it?
bruddah said:
approximately how many times do you do it?
Click to expand...
Click to collapse
sometimes it takes a couple minutes before it boots up all the way. it works for me alot but i am not guaranteeing it will for you but it can't hurt to try
-SGA- said:
Check every other thread... they are pretty much the same thing. You answer is Darkside Super wipe. Flash it, flash your ROM, flash GAPPs, reboot!
Done
Sent from my SGH-T989 using xda premium
---------- Post added at 12:16 AM ---------- Previous post was at 12:12 AM ----------
http://forum.xda-developers.com/showthread.php?t=1477955
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
and are you sure i cant just flash the stock rom onto my phone? cuz ide hate to wipe everything off of my phone
bruddah said:
and are you sure i cant just flash the stock rom onto my phone? cuz ide hate to wipe everything off of my phone
Click to expand...
Click to collapse
just wipe cache and dalvik . then flash rom make back up if you need too.
richardlibeau said:
just wipe cache and dalvik . then flash rom make back up if you need too.
Click to expand...
Click to collapse
which rom do you mean when you say flash rom? the stock rom? or a custom one? i want to keep it stock for now
bruddah said:
which rom do you mean when you say flash rom? the stock rom? or a custom one? i want to keep it stock for now
Click to expand...
Click to collapse
YES STOCK
richardlibeau said:
YES STOCK
Click to expand...
Click to collapse
lool i was just making sure and i cant find a file for the stock telus ics :$ can someone help me? i found one for the koodo and tmobile ics but i want the telus one. Thanks
Ive got a new problem :S i now know exactly how to fix my phone. But there are some pictures on the internal SD Card that i really need. Theyre pictures from a family vacation to Washington DC an theyre really important. I tried to mount my phone from Clockwork Mod Recovery but mounting the system but it didnt work. Then i tried selecting all the options and mounted them all but all my computer does is reckognize that something is plugged in. I cant get into the files of my phone. I also checked and my computer says the my phone is a "Storage Device; Modem"
bruddah said:
Ive got a new problem :S i now know exactly how to fix my phone. But there are some pictures on the internal SD Card that i really need. Theyre pictures from a family vacation to Washington DC an theyre really important. I tried to mount my phone from Clockwork Mod Recovery but mounting the system but it didnt work. Then i tried selecting all the options and mounted them all but all my computer does is reckognize that something is plugged in. I cant get into the files of my phone. I also checked and my computer says the my phone is a "Storage Device; Modem"
Click to expand...
Click to collapse
Your not suppose mount the system, just storage. In TWRP you can mount internal or external storage. Also, I'm not quite getting what you're saying. You have tried taking out the SD card and mounting it directly on your PC and it didn't work?
Sent from JMT Goodness
In the CM9 thread it says to ensure you download/install a CWM Touch recovery - if you don't you're guaranteed to get a boot loop. Their "fix" was to download and flash darkside-wipe-cache-only.zip via recovery and that will fix the problem.
I ended up having the same issue and that's how I fixed it.
LoopDoGG79 said:
Your not suppose mount the system, just storage. In TWRP you can mount internal or external storage. Also, I'm not quite getting what you're saying. You have tried taking out the SD card and mounting it directly on your PC and it didn't work?
Sent from JMT Goodness
Click to expand...
Click to collapse
Im saying that im stuck in a bootloop and i wana get the data off of my internal storage. I can only get to CWM recovery. I also wana just go back to stock ICS but if i can fix cyanogen without wiping my phone that would be great! i tried to plug in my phone and get my computer to read it so i can browse my phone's internal memory and get the pictures off of the internal storage but it wont recognize my phone. I tried checking all of the things in CWM but none of them worked.
i_is_surf said:
In the CM9 thread it says to ensure you download/install a CWM Touch recovery - if you don't you're guaranteed to get a boot loop. Their "fix" was to download and flash darkside-wipe-cache-only.zip via recovery and that will fix the problem.
I ended up having the same issue and that's how I fixed it.
Click to expand...
Click to collapse
so your saying that i didnt download/install a CWM Touch Recovery so thats why im in the boot loop and that to fix it i can download and flash a darkside Wipe Cache Only and the phone will get out of the bootloop and Cyanogen will work?
Hey guys, I'm really new to rooting, flashing roms, and Android in general (I've used iOS since 2007 until a month ago... please have mercy on my soul). I have an AT&T GN2 that I would like to remove the bloatware from, hence why I began investigating rooting, but it's snowballed into my desire to try out some of the amazing ROMs that the developers here have produced. Since the Note 2 uses the Exynos 4, I rooted using the ExynosAbuse exploit and downloaded Titanium Backup to freeze the AT&T apps. So far, so good.
However, I am wanting to get into how to flash custom ROMs, like CyanogenMod, so I downloaded the CWM RomManager and flashed the CWM Recovery. I downloaded the CyanogenMod 10.1 release for the i317 model (here: http://forum.xda-developers.com/showthread.php?t=2024495) and the latest gApps package (for 4.2.1), and flashed both from CWM RomManager. When it rebooted, it showed the CyanogenMod boot screen, but it appears to be stuck there. I'm not sure what to do at this point, and am hoping I didn't brick my phone. Is there anything I can do at this point?
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Have you changed kernel???
Sent from my MT11i using xda app-developers app
id10terrordfw said:
Use the three button combo to get into recovery, should be volume up, home, and power, and then wipe data or install a stock rooted ROM. That should help get you to a bootable stage.
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
When I booted into recovery, I got the CWM recovery (which is a good thing, I suppose). I wiped the cache, and then installed the CM 10.1 zip and gApps zip. However, I think I still need to wipe data/factory reset, right?
So, at this point, I've:
1. Rooted the device using Chainfire's ExynosAbuse apk (super easy).
2. Installed RootChecker (success) and TI backup (froze bloatware apps).
3. Downloaded CWM RomManager.
4. Flashed CWM Recovery.
5. Downloaded CM 10.1 port for i317 (the AT&T GN2 model) and the 4.2.1 gApps zips.
6. Chose to install ROM from SD card in RomManager, added both CM 10.1 and gApps, and only selected install (did not wipe cache or user data at this point).
7. Received blue CyanogenMod boot screen... excited... but it remains on the boot screen. Sad face.
8. Removed battery to power the device off, placed battery back in, and then booted into recovery mode (CWM recovery).
9. Installed the CM 10.1 zip and gApps zip from SD, then wiped cache.
10. ???
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Peleus16 said:
Have you changed kernel???
Sent from my MT11i using xda app-developers app
Click to expand...
Click to collapse
This is a great point, at no point op has mentioned kernel.
Sent from my SAMSUNG-SGH-I317 using xda premium
cdshepherd said:
Wipe data factory reset. Wipe cache/dalvik. Flash cm, flash gapps. Reboot
And dont use rom manager. Do it in recovery
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
NowhereOutThere said:
Okay, booted into CMW recovery and performed all in that order. It booted! Hurrah. Only problem: the AOSP keyboard crashes constantly, making text input not possible. Sigh...
Click to expand...
Click to collapse
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Boot back into recovery and fix permissions. That may help
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
NowhereOutThere said:
Okay, I booted into recovery mode and fixed permissions... the keyboard still crashes, which means I can't type anything. Do I have to do anything with the kernel? I didn't wipe the dalvik cache, should I have done that?
EDIT: wiped dalvik cache, didn't do anything... apparently, this was a fine release so I'm not sure what could be causing the keyboard issues.
Click to expand...
Click to collapse
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Im not exactly sure either. I have yet to flash cm. Read the cm thread?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
NowhereOutThere said:
So what ROM are you using? I just picked cyanogenmod because I've heard of it before, but I would like something that works. Is there a way to add another ROM onto the phone's storage, as I don't have an SD card... And since I can't type anything, it's not like I can download it from the phone's browser?
Click to expand...
Click to collapse
Plug it into your computer and see if you can mount your internal sd. If you can download a new rom to your computer and transfer it to sd. Did you make a backup before flashing?
Im just running stock rooted for now.
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Well, I'm downloading CleanROM right now. I also downloaded another cm 10.1 file just in case, perhaps it's because I downloaded it on the mobile Chrome browser that I'm having problems? I also downloaded a kernel from the thread to help with performance. However, if I can't get these on the phone, it doesn't matter. Since I'm on a Mac, I have to use Android File Transfer, and it isn't registering my phone, unfortunately. I may have to go out and buy a cheap SD card and throw the files on there. It may not hurt to have one around, anyways.
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Text yourself the download link to CleanRom. :thumbup:
And chrome shouldnt have made a difference. I take it you didnt make a nandroid backup before you flashed cm?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
No... I thought that a backup of the original ROM was made when flashing CWM recovery, but I am a noob and that did not happen. Unfortunately, the browser doesn't even work! So I cannot text myself the link for the download. I should be able to flash a zip file from a micro sdhc, right?
Flash the right GAPPS, the crashing keyboard is a symptom of incorrect GAPPS. The December one is for 4.2.1 only, which is what CM10.1 is based on. Make sure you flash the right GAPPS with the right CM version.
Sent from my GT-N7105 using xda premium
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
ManelScout4Life said:
The CM you linked in the OP is CM10 not 10.1, so you flashed the wrong GAPPs
Click to expand...
Click to collapse
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Just grab goo manager from the market and dl the correct gapps to your phone. Either that or use your phones browser. No need for a pc. Boot in recovery, wipe cache and dalvik and flash correct gapps. Should be gtg.
Edit: just saw your browser isn't working. Goo manager's your best bet. Could always try another browser from the market as well. Good luck.
NowhereOutThere said:
Oh... crap. Is there any way I can get the correct gApps on my phone? Ugh... I'm going to have access to a Windows machine today, so I can download the correct GAPPS and put them on my flash drive. I can still put it in USB debugging mode, but will the PC recognize it? Android File Transfer software for Mac does not recognize the phone any more, so I'm a bit limited in what I can do. Unless, like I said before, I can just pop in an SD card with the correct file.
Click to expand...
Click to collapse
While in recovery plug usb into computer (make sure drivers are installed) in recovery menu navigate to mount usb storage. See if that works
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
perkins.reid27 said:
Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
Click to expand...
Click to collapse
Ensure CM10 and gapps is on an external sd card. wipe system, data, cache, and dalvik. Then reinstall cm10 and gapps (respectively in this order) and then reboot.
aybarrap1 said:
Ensure CM10 and gapps is on an external sd card. wipe system, data, cache, and dalvik. Then reinstall cm10 and gapps (respectively in this order) and then reboot.
Click to expand...
Click to collapse
I'm a noob. I need a step by step. So the logo is there spinning, do i take the battery out? Plug it into computer? I'm lost..
perkins.reid27 said:
Rooted Galaxy S3 AT&T i19100 with Clock something..
Tried to install Cyanogenmod 10 and now it's stuck in boot loop. I really need help. I don't care to keep any of my information, factory reset would be fine.
Click to expand...
Click to collapse
Are you an at&t (i747) or a i9100.
Two different things... Not trying to sound like a jerk but that could seriously mess your phone up.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
Are you an at&t (i747) or a i9100.
Two different things... Not trying to sound like a jerk but that could seriously mess your phone up.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
No problem. Umm well i bought from At&t, (AT&T logo on back) bout when i plug it into my computer it's called i9100.
perkins.reid27 said:
No problem. Umm well i bought from At&t, (AT&T logo on back) bout when i plug it into my computer it's called i9100.
Click to expand...
Click to collapse
The i9100 is the s2 not the s3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
KorGuy123 said:
The i9100 is the s2 not the s3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Oh.. well what do i do? And also i found an message and at the bottom it says "Sent from my SAMSUNG-SGH-I747 using xda app-developers app"
perkins.reid27 said:
Oh.. well what do i do? And also i found an message and at the bottom it says "Sent from my SAMSUNG-SGH-I747 using xda app-developers app"
Click to expand...
Click to collapse
Settings > about phone > model number
xBeerdroiDx said:
Settings > about phone > model number
Click to expand...
Click to collapse
I can't? It's just looping the CyanogenMod boot..?
Okay you have galaxy s3 for sure ?
What steps did you follow to flash cyanogenmod? Can you get into recovery?
Sent from my SAMSUNG-SGH-I747 using xda premium
hednik said:
Okay you have galaxy s3 for sure ?
What steps did you follow to flash cyanogenmod? Can you get into recovery?
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes, i'm 100% sure. I downloaded CWM as my root. Then on my computer i downloaded gapps from the link given at http://phonerebel.com/how-to-instal...alaxy-s3-4-2-1-sprintattt-mobileverizon-siii/
The cyanogenmod link didn't work for me on that website so i looked through the forums and found this thread. http://forum.xda-developers.com/showthread.php?t=1778270
After i read it, i followed this link http://get.cm/?device=d2att and clicked the one at the top to download to my computer. But it didn't work. So i visited the forum on my phone and downloaded straight to my phone. I made a folder on my SD called CyanogenMod, put the both of the files in there. Then i powered down my device, and activated recovery mode. I selected install zip twice, installing both files, then hit reboot. Then the CyanogenMod logo pops up, and now hasn't gone away.
perkins.reid27 said:
Yes, i'm 100% sure. I downloaded CWM as my root. Then on my computer i downloaded gapps from the link given at http://phonerebel.com/how-to-instal...alaxy-s3-4-2-1-sprintattt-mobileverizon-siii/
The cyanogenmod link didn't work for me on that website so i looked through the forums and found this thread. http://forum.xda-developers.com/showthread.php?t=1778270
After i read it, i followed this link http://get.cm/?device=d2att and clicked the one at the top to download to my computer. But it didn't work. So i visited the forum on my phone and downloaded straight to my phone. I made a folder on my SD called CyanogenMod, put the both of the files in there. Then i powered down my device, and activated recovery mode. I selected install zip twice, installing both files, then hit reboot. Then the CyanogenMod logo pops up, and now hasn't gone away.
Click to expand...
Click to collapse
Ah sounds like a soft brick and nothing to get to worried about. If you can get back into recovery then I suggest you reflash the ROM and the gapps. Now you are linking posts to two different versions of CyanogenMOD. 10.1 is for android 4.2.2 and 10 is 4.1.2. Make sure you download Gapps for 4.2.2 and cyanogenmod 10.1.
http://get.cm/?device=d2att
for 10.1
and
http://goo.im
for 4.2.2 gapps
hednik said:
Ah sounds like a soft brick and nothing to get to worried about. If you can get back into recovery then I suggest you reflash the ROM and the gapps. Now you are linking posts to two different versions of CyanogenMOD. 10.1 is for android 4.2.2 and 10 is 4.1.2. Make sure you download Gapps for 4.2.2 and cyanogenmod 10.1.
http://get.cm/?device=d2att
for 10.1
and
http://goo.im
for 4.2.2 gapps
Click to expand...
Click to collapse
Okay so i got it into recovery. What EXACTLY should i do? Wipe cache, wipe data? Reboot system now, reinstall the zips? Cause isn't it a bad rom for my phone that caused this?
perkins.reid27 said:
Okay so i got it into recovery. What EXACTLY should i do? Wipe cache, wipe data? Reboot system now, reinstall the zips? Cause isn't it a bad rom for my phone that caused this?
Click to expand...
Click to collapse
If you really want to be careful just download 10.1 and the Gapps for 4.2.2 put those on your SD card in that same folder (delete old ones of course) and reflash again.
Flashing a ROM for i747 or d2att even if it s bad download won't do any permanent damage any way.
You will be good to go. Just so you know is nearly impossible to hard brick the galaxy s3 unless you flash a international ROM. Anything listed in this device specific forum won't hurt your device.
Wipe cache, davlik cache (located in advanced), factory reset, and format system if you like but its not necessary. After first successful boot, reboot into recovery and make a backup.
P.S. Make sure you hit thanks to the guys who helped you earlier in the post as well
hednik said:
If you really want to be careful just download 10.1 and the Gapps for 4.2.2 put those on your SD card in that same folder (delete old ones of course) and reflash again.
Flashing a ROM for i747 or d2att even if it s bad download won't do any permanent damage any way.
You will be good to go. Just so you know is nearly impossible to hard brick the galaxy s3 unless you flash a international ROM. Anything listed in this device specific forum won't hurt your device.
P.S. Make sure you hit thanks to the guys who helped you earlier in the post as well
Click to expand...
Click to collapse
I will. But how do i download to my SD? Like i'm sure that my computer isn't recognizing my phone
Okay so i wiped all you told me to do, yet the cyanogenmod logo is still there.
perkins.reid27 said:
I will. But how do i download to my SD? Like i'm sure that my computer isn't recognizing my phone.
Click to expand...
Click to collapse
Do you have an external card ?
If not try this: Just flash the ROM and not the gapps. You wont have google apps but your phone will boot and then you can download the gapps on your phone. It is doesn't boot you need a sd card or flahs with odin back to stock. Did you make a backup of your stock ROM before you flashed CM 10 ?
hednik said:
Do you have an external card ?
If not try this: Just flash the ROM and not the gapps. You wont have google apps but your phone will boot and then you can download the gapps on your phone. It is doesn't boot you need a sd card or flahs with odin back to stock. Did you make a backup of your stock ROM before you flashed CM 10 ?
Click to expand...
Click to collapse
Probably not. Okay i just rewiped everything, (i found out i put the files on the SD main, not external) rebooted my phone, now it's loading in CyanogenMod.
perkins.reid27 said:
Probably not. Okay i just rewiped everything, (i found out i put the files on the SD main, not external) rebooted my phone, now it's loading in CyanogenMod.
Click to expand...
Click to collapse
What version of CyanogenMod did you have ? 10.1 or 10 ?
hednik said:
What version of CyanogenMod did you have ? 10.1 or 10 ?
Click to expand...
Click to collapse
Settings>About phone>CyanogenMod version>10.1-2013402
& it appears that i have the play store, and google apps. Whcih google apps should there be?
perkins.reid27 said:
Settings>About phone>CyanogenMod version>10.1-2013402
& it appears that i have the play store, and google apps. Whcih google apps should there be?
Click to expand...
Click to collapse
If you have the Play Store, then it flashed the Gapps.
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
tpag02 said:
I was using the latest alpha of CM11, then i i wanted to get back to CM10.2, i did all i had to do (wipes, and stuff) and when starting up, the phone frezees and keep on doing this...
I also have searched about this issue and found no answer.
Click to expand...
Click to collapse
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Almite said:
Have you tried booting to recovery, then doing an advanced wipe (system/data/cache/dalvik) and reflashing rom/gapps?
What version of recovery are you using?
Click to expand...
Click to collapse
yes, i have. I also got back to stock, used an older recover, flashed with an older version of CM and nothing. I first was using CWM 6.0.3.7., after that I used 6.0.4.3, then an older version of TWRP but nothing. I also tried booting to system without flashing gapps.
With stock ROM everything works just fine.
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
iamdofus said:
Just wipeout internal and external card once and than install with twrp 2.6.1.0. And don't forget to say thanks
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Well, thank you, but it didn´t work.
it happened to me the same thing months ago. never had solution. still in waiting. attempt internal and external SD format. and followed the same. I hope someday they can come up with the solution! : (
i have the same problem too
I try to install multiple ROM 4.2.2 and I could only install one version AOKP Milstone JB1. I also worked the other. however all 4.1.2 rom if I worked. I could not install any 4.3 and 4.4 now does not know what is the problem but I've tried everything! anyone found the solution yet but I see I'm not the only one! (excuse my bad English, not my language )
Well you all are right, I am also using shadow mastery (stock rooted rom). Just because I had the same problem sometimes stucking and rebooting and sometimes after going in gallery. Even I can't use 4.3 and 4.4 roms. Anyone have to contact with room developer or someone who know about this problem.
Sent from my SGH-T989 using xda premium
You might want to find an Official T-Mobile or Telus 4.1.2 or 4.0.3/4.0.4 rom that is Odin flashable, not one that has been custom made/flashable from recovery - then just start over after getting back to true stock, change to TWRP or CWM recovery that is 4.3+ compatiable, root and then flash rom/gapps etc.