So I flashed the latest Slimbean last night and it instabricked my phone. Total failure. After I rebooted the phone would turn on, wont charge, wont go into recovery or download mode. Yes I flashed correctly and yes the battery was charged. This is probably the 10th rom i've tried with this phone. Any help out there?
Make sure you're trying to boot into download using the correct combo (Vol down + power + home buttons) use Vol up for recovery.
Make sure the file you downloaded is for US GS3 codename "d2att,d2tmo, or d2ca" and not anything international.
If you didn't flash anything international or from another phone you shouldn't be bricked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Hmm, maybe I did flash the I9300 one, but even so. Why would that mess with my recovery/download?
The I9300 flash contains a kernel specific to I9300, not I747 or I747M...
blaze0303 said:
Hmm, maybe I did flash the I9300 one, but even so. Why would that mess with my recovery/download?
Click to expand...
Click to collapse
Because the international versions hardware is COMPLETELY different than US version.
If you did flash international version you're completely out of luck, you're bricked and your phone is now a paperweight. Sorry bud.
Only thing that can bring it back to life is JTAG service.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Not good, when I get off of work i'll look more into it. Thanks guys.
Edit: When plugged in to shows qhsusb_download. Can I flash from Odin with this or does that mean it needs jtag?
blaze0303 said:
Not good, when I get off of work i'll look more into it. Thanks guys.
Edit: When plugged in to shows qhsusb_download. Can I flash from Odin with this or does that mean it needs jtag?
Click to expand...
Click to collapse
Download Kies to get drivers then disable or uninstall kies so it doesn't disturb Odin. Flash stock ROM with Odin and you should be good to go. You'd need to get into download mode though on the phone. If you can't, I'd say you can only JTAG.
Course, I've never bricked my device. That's just what I gathered based on the little bit I just read up on. Good luck. :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
busarov said:
Download Kies to get drivers then disable or uninstall kies so it doesn't disturb Odin. Flash stock ROM with Odin and you should be good to go. You'd need to get into download mode though on the phone. If you can't, I'd say you can only JTAG.
Course, I've never bricked my device. That's just what I gathered based on the little bit I just read up on. Good luck. :thumbup:
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
As stated by busarov, if your device is seen by your PC there is still hope!
Try Odin as many times as you can as long as your device is visible.
I've read its taken up to 5 times times for some users to get it to work after flashing international firmware.
Just don't use Kies. Since your device is rooted it will have problems. Stick to Odin.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Thanks to both of you.
Slimbean didn't brick your phone u flashed wrong file should clear that up.....good luck on repair
jayRokk said:
As stated by busarov, if your device is seen by your PC there is still hope!
Try Odin as many times as you can as long as your device is visible.
I've read its taken up to 5 times times for some users to get it to work after flashing international firmware.
Just don't use Kies. Since your device is rooted it will have problems. Stick to Odin.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
There is not necessarily hope. The PC can still register a generic USB device on a hard brick. Unless the phone can be put into download mode, either by Volume Down + Home + Power or by homemade/purchased USB JIG, I'm afraid a JTAG is your only recourse.
Keep in mind if the device does not turn on at all, no vibrations, no flicker of light, even after a battery pull, and the only sign is a red LED turns on when plugged into the charger, the phone is hard bricked and will require a JIG (not guaranteed) or a JTAG.
Brooklynsour said:
Slimbean didn't brick your phone u flashed wrong file should clear that up.....good luck on repair
Click to expand...
Click to collapse
Agreed, even though you flashed a Slimbean ROM, it was for the incorrect variant. Your thread title should be changed to reflect that, as it may cause new users to be fearful when flashing that ROM.
Sent from my SGH-I747 using xda app-developers app
It's going to require jtag service. I can't change the title of the thread, but if a mod wants to, please go ahead.
blaze0303 said:
It's going to require jtag service. I can't change the title of the thread, but if a mod wants to, please go ahead.
Click to expand...
Click to collapse
That stinks. At least it an option for us on Samsung devices. Mobiletechvideos.com for jtag is fairly quick from what I have heard. Good luck to you
blaze0303 said:
When plugged in to shows qhsusb_download.
Click to expand...
Click to collapse
Yep, that's a hard brick alright.
I used this JTAG service for my D2att S3 and it worked out great.
http://www.ebay.com/itm/JTAG-Brick-...765?pt=LH_DefaultDomain_0&hash=item4ab7c66a45
Related
Ok so as you all know i'm a newbie.. I didn't know there was like 6 different models of Galaxy s2's so being dumb I download the 4.0.3. ics firmware thinking it was for my galaxy and it turns out my model is a sph-d710 and the firmware i downloaded was a international galaxy model gt-i9100. Two different phones, wrong flash with odin.:/
I'm stuck with a brick i'm not sure soft brick or hard brick and i don't know what to do! my phone when pressing power on it goes to a triangle saying to recovery with kies. can't get to download, or recovery mode. so i decided to make a usb jig and this is what it says in download mode.
FACTORY MODE:
PRODUCT NAME: GT-I9100(used to say sph-d710)
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
When i connect to pc it isn't detected by microsoft acts like nothing is plugged in, kies, and odin don't work either. i tried every port a billion times disconnecting and reconnecting. i even tried downloading the gt-i9100 driver to see if that worked and no luck.
Anybody, help? I miss my phone.
Thank you.
Did you try a different cord?
Sent from my SPH-D710 using XDA App
Jtag is the only thing that will fix it .. sprint and act stupid may get it replaced also but there is no fix except jtag
Sent from my SPH-D710 using Tapatalk
nothing will help you except a jtag. now you know at least. alot of people have done this. you aren't the only one. jtag or returning it to sprint with some real good story. good luck man.
You can get into download mode, so try a different computer. If that failes, $50 for jtag service.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
jerryparid said:
You can get into download mode, so try a different computer. If that failes, $50 for jtag service.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Click to expand...
Click to collapse
It will always go into download mode but when flashing international version it disables USB port and will never connect in Odin
Sent from my SPH-D710 using xda premium
Epix4G said:
It will always go into download mode but when flashing international version it disables USB port and will never connect in Odin
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That is not true all the time. I flashed an international firmware version on my phone and it still did connect through odin. Thank god. Can you still access recovery? I was able to but I couldn't access my sd card but I was able to access internal storage which did not help me as I had no roms on there.
The issue is not the international ROM per se. It is the international bootloader. If you flash that, then nobody has been able to get their phone recognized in a USB port. Some packages do and some packages don't include the bootloader, so you could have flashed an international ROM w/o flashing the intl bootloader.
ty i have the same problem and i couldnt figure nothing out so basically at this point the phone is a paper weight? unless you can come up with a hell of a story to tell sprint and if sprint buys the story can they fix your phone right there on the spot free of charge?
Jtag the device.
Sent from my SPH-D710 using Tapatalk 2
i recently got tmobile galaxy s2 with cracked scree. so i replaced the screen and when i turn it on. it reboots then after 1 min it does the same thing over and over. idk why that's happening. any idea how to fix the problem. help would be greatly appreciated. thanks
I would recommend you call and get another if you just got our. I really don't suggest the following return it! I am not responsible for what you do with your phone. If it is bad hardware you want a new one.
You just need download mode hold Vol buttons on boot and plug in USB as it boots but before samsung logo goes away (may take a few good tries there is a real trick to it sometimes).
If that works follow Odin flash directions for rooting the phone. I used theunlckr guide myself (easy find via Google).
If you can get download mode and flash a recovery package to it you may get it running. may just be really bad flash on their end.
I HIGHLY SUGGEST YOU REALLY TRY RETURNING IT AGAIN IF YOU JUST GOT IT. USE THIS ONLY AS A LAST RESORT. I AM NOT RESPONSIBLE FOR YOUR ACTIONS WITH YOUR PHONE.
Sent from my SGH-T989 using Xparent Green Tapatalk
RealPariah said:
I would recommend you call and get another if you just got our. I really don't suggest the following return it! I am not responsible for what you do with your phone. If it is bad hardware you want a new one.
You just need download mode hold Vol buttons on boot and plug in USB as it boots but before samsung logo goes away (may take a few good tries there is a real trick to it sometimes).
If that works follow Odin flash directions for rooting the phone. I used theunlckr guide myself (easy find via Google).
If you can get download mode and flash a recovery package to it you may get it running. may just be really bad flash on their end.
I HIGHLY SUGGEST YOU REALLY TRY RETURNING IT AGAIN IF YOU JUST GOT IT. USE THIS ONLY AS A LAST RESORT. I AM NOT RESPONSIBLE FOR YOUR ACTIONS WITH YOUR PHONE.
Sent from my SGH-T989 using Xparent Green Tapatalk
Click to expand...
Click to collapse
Agreed. You could flash a different ROM entirely
Sent from my SGH-T989 using XDA
is that possible for my phone because my phone isnt rooted. and is it possible to get a diffrent rom
btw can you please put a link on how to root a rom with the download mode vol up and plug the usb
josephgalaxy said:
btw can you please put a link on how to root a rom with the download mode vol up and plug the usb
Click to expand...
Click to collapse
Here's a link
tcboo said:
Here's a link
Click to expand...
Click to collapse
AAAAAH hahahaha ! thats classic Loving that good job tc!
tcboo said:
Here's a link
Click to expand...
Click to collapse
Lol.
Did the phone work fine before you swapped the screen?
Either, you shorted something during the screen swap.
Sent from my SAMSUNG-SGH-T989 using xda premium
or this also happens with non oem parts. Where did you get the screen? Either way I'd take it to a cell phone repair store.
Sent from my SAMSUNG-SGH-T989 using xda premium
Thanks guys. I got my screen at eBay . And ya it was working fine before the screen cracked and nothin would turn on exept for the keypad.
About 20 minutes ago I started Flashing Android Revolution HD on my device then the screen went black. Nothing's happened since then and now it won't start up or anything. What's going on?
I do believe that rom is for the international gs3.
Sent from my Galaxy S3
Well is there anything I can do at this point, or have I totally bricked my device?
Driice said:
Well is there anything I can do at this point, or have I totally bricked my device?
Click to expand...
Click to collapse
Do you know how to get into download mode a.k.a. Odin mode?
theROMinator said:
Do you know how to get into download mode a.k.a. Odin mode?
Click to expand...
Click to collapse
Yeah down volume, home, and lock button right?
I tried it and nothing. Same with recovery mode. Kies all can't detect my phone.
I guess I managed to ruin my phone :\
Driice said:
Yeah down volume, home, and lock button right?
Click to expand...
Click to collapse
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
theROMinator said:
Yes, sir, please get into that mode for me but first make sure your phone is off and then i'll guide you through the rest.
BTW: Are you at a computer? This requires you to download a stock image for your device which is around ~600MB.
Click to expand...
Click to collapse
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Driice said:
Can you think of anything else I can do or should I go into At&T and try and get a new phone under warranty?
Click to expand...
Click to collapse
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
theROMinator said:
Dude, this is very simple. I wouldn't recommended getting a new phone if it can be easily fixed.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Driice said:
Ok well I can't go into recovery mode or download mode on my phone. My computer recognizes a device is being plugged in, but can't tell its my phone. What should I do?
Click to expand...
Click to collapse
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
theROMinator said:
First, try this, and then let me know what happens: http://forum.xda-developers.com/showthread.php?t=1727443
Click to expand...
Click to collapse
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Edit: I'm reading through the post and discovered people in a similar position to me, my charging light does turn on red with no battery in. I'll see if there's some magic fix on that thread somewhere.
Driice said:
I have the tar file in PDA on ODIN, but I can't get my device into download mode because it won't respond. I tried hitting start on Odin anyway but nothing happened.
I was thinking I could tell my computer somehow the device is my phone but I'm not sure if that would help without it being in download mode.
Click to expand...
Click to collapse
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
theROMinator said:
Okay so we need to focus on getting your phone into DL mode. Pull the battery for one minute and hold the power button down for ten seconds; re-insert the battery and try to get into DL mode again.
Click to expand...
Click to collapse
No luck.
The only thing I can get it to do is turn the red light on when I plug it in with no battery
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
why would you flash that rom?
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
and Wond3r: Because I'm a dumbass
Subscribe to the thread. I will post my results when I get the jig. I read that it works in the thread I linked you to. Don't worry
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
lolll............
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Driice said:
I'm reading all about how the S Series is almost impossible to really brick, so trying this USB Jig couldn't hurt I guess. I mean it's 4 bucks so I'll try it and update with how it goes
Click to expand...
Click to collapse
hahaha, not this one,VERY easy to brick
theROMinator said:
If you're sure you can't get into download mode then your best bet is to get a USB jig. They're fairly inexpensive, i'll link you one. This jig has good reviews and works for pretty much any Samsung device with DL mode:
http://www.amazon.com/gp/aw/d/B0053H73JQ/ref=mp_s_a_1?pi=SL75&qid=1347248180&sr=8-1
Edit: I'll be buying one eventually to test it out. Just ordered one, it will be here Tuesday.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Have fun testin a jig that dont help here. YOUR PHONE IS A DOORSTOP. The link wont help because he didnt flash an international boot image, he flash a whole international rom. look at the script in an international rom vs one of your scripts. The partitioning is ****ked now.
unleashed12 said:
Dude sorry to say but you are done, this has happened to plenty of people on this forum. Your phone is dead (the jig WILL NOT help you, you will need a jtag/warrantee to fix it at this point. Your phone will probably say qusb_dload or something if you try to plug it into your pc, further confirming that fact.
Click to expand...
Click to collapse
Please listen to this guy, only comment here containing any actual sense. QHSUSB_DLOAD=kiss of death
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
deziguy420 said:
I flashed SlimBean i777 and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help. Thanks in advance
Click to expand...
Click to collapse
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Damn.. not even close...
Sent from my SGH-T999 using xda app-developers app
x1tyme said:
why on earth you flash i777 rom? thats for Samsung Galaxy S II. Sir, you're brick..just throw it away or claim insurance...
Click to expand...
Click to collapse
Seriously.. we have our own Slim Rom in the development section..
joshnichols189 said:
Seriously.. we have our own Slim Rom in the development section..
Click to expand...
Click to collapse
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
thanks for your help..this **** is ****ed
VibrantThemer said:
First try to get into a download mode.
If you couldn't try the following methods that used to work with Vibrant:
1. Pull the battery out
2. Hold both vol up & down
3. Hold Power button
4. Connect your usb to a PC and phone
5. Insert your battery
6. Flash any rom
Click to expand...
Click to collapse
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
bikrame said:
I dont think this goona work after u flash different phone ROM. Justv my 2 cents. Correct me if I m wrong.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Doesn't hurt to at least try.
Sent from my SGH-T999 using xda premium
lazarat said:
It is becoming ridiculous how much we have of such threads lately. Wonder what fix they expect from us since they do not even bother searching which device that rom is for...
Click to expand...
Click to collapse
I understand people bricking from international flashes. But this was s2.... and it wasn't even our carrier lol
Sent from my SGH-T999 using xda app-developers app
---------- Post added at 07:43 PM ---------- Previous post was at 07:41 PM ----------
Easiest test... does it vibrate? If it doesn't then you have to jtag it
Sent from my SGH-T999 using xda app-developers app
I'm sorry op but I just can't understand why would you even try to flash that!
Sent from my SGH-T999 using xda app-developers app
I know that the good-majority of you lack sympathy, but damn, I feel bad for OP. It's really a tough break when things like this happen.
Hope all ends well, you probably will have to JTAG.
Sent from my SGH-T999 using xda app-developers app
I sent it to mobiletechvideo, they repair hard brick and it costs $60 a lot cheaper then buying a new phone. This wasn't the first time I ever flashed a ROM but the stupid mistake was not doing a research. I assumed that ROM is for AT&t version. I have read in this forums that as long as you don't flash At&t modem you should be fine but I know I grabbed the wrong ROM (At&t Galaxy S II). Well you learn from your mistake I finally experienced how it feels to have hard bricked phone....lol
Galaxy S2 not working after flashing rom
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
masu0069 said:
I was trying to Flash rom in Galaxy S2 via Odin...
But by mistake I pressed start button in Odin without inserting PDA path...... Only PIT file I have added.....and forget to add PDA
Now it is not starting any more.....not even in Recovery mode( Volume up + Home + Power button) ....
I think I lost everything........in phone.......
If anybody having some solution ...please let be needful
Click to expand...
Click to collapse
This is the T-Mobile S3 variant forums, try asking in your device's forum
i unpluged the device before dhe odin finished his job ( by mistakeee ) and now it doesnt turn on , charge , go to recovery/odin , hold down power button for 30-60-120 sec nth hapend, it has baterri 90-100 % . plss guys help me :'( i have an samsung galaxy s advance .
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
pratham vats said:
I installed recovery.tar.md5 in my sm-g507f/dd and now I have no power tried all the possible combination to get into recovery and download mode. However if I plug it in to my computer I am keep getting an error device is not recognized I have tried different USB cables also tried different computers and also uninstalled and reinstalled kies. Can someone help.
Click to expand...
Click to collapse
Wrong forum, this is the T-Mobile Galaxy S3 forum
android one
i flashed stock rom in my spice android one... after flashing it got struck on spice logo... ithought it was a flashing error ad tried again this time(format + download) now it is completely stopped even the spice logo is also not comming... i tried to flash many a times but no response... but my phone is still detected by sp flash tool.. what could be the reason
Hiii please give me solution for Lava iris 60
Problem after flashing custom ROM phone not to be start
? By mistake install AIS lava iris 60 costom Rom file and after not to be start phone .... Totally are ded ... Please give me solution
Hi XDA
I think I just bricked my Galaxy S3 by loading the wrong bootloader on it
I can't turn on the phone, I can't boot into recovery or download mode.
The only sign on life is when I connect it to my PC I can hear the "USB connected" sound. If I plug it in without a battey, I can see a red led on the phone as well as the Windows sound.
I can see HS_USB QDLoader 9008 in the device manager
Please help.. I can't stand my old iPhone as a replacement :/
When you connect the phone to the computer and it makes the "connected" sound, do the buttons respond for download or recovery mode?
Have you tried a USB jig to force it into download mode?
You may have to have it revived via jtag if nothing works.
audit13 said:
When you connect the phone to the computer and it makes the "connected" sound, do the buttons respond for download or recovery mode?
Have you tried a USB jig to force it into download mode?
You may have to have it revived via jtag if nothing works.
Click to expand...
Click to collapse
No nothing works.. recovery or download, connected or not. I tried to remove the battery, connect the phone, hold home+volume down and put the battery back with no success
I'll try to make myself a usb jig
I know that a USB jig doesn't cost much to buy but it's a pain if no one in your area sells or has one you could borrow.
Here's a thread for people that may be able to loan you a jig: http://forum.xda-developers.com/showthread.php?t=1891197
MaxGQC said:
Hi XDA
I think I just bricked my Galaxy S3 by loading the wrong bootloader on it
I can't turn on the phone, I can't boot into recovery or download mode.
The only sign on life is when I connect it to my PC I can hear the "USB connected" sound. If I plug it in without a battey, I can see a red led on the phone as well as the Windows sound.
I can see HS_USB QDLoader 9008 in the device manager
Please help.. I can't stand my old iPhone as a replacement :/
Click to expand...
Click to collapse
What exactly so you mean by "wrong bootloader" for a different model phone(example I747 bootloader on an I747M phone) or you were on mjb/mj5 and tried to flash an older bootloader? If it was wrong model you need a jtag/riff box to recover it if it was an older bootloader you need a 16gb or larger sd card (maybe an additional 1-2gb card too) and to look at debricking/unbricking threads there are a few of them. It seems to be about 70% effective so good luck.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
theramsey3 said:
What exactly so you mean by "wrong bootloader" for a different model phone(example I747 bootloader on an I747M phone) or you were on mjb/mj5 and tried to flash an older bootloader? If it was wrong model you need a jtag/riff box to recover it if it was an older bootloader you need a 16gb or larger sd card (maybe an additional 1-2gb card too) and to look at debricking/unbricking threads there are a few of them. It seems to be about 70% effective so good luck.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I think I flashed I747 BL on I747m. The filename was I747_UCDMG2_Firmware_Modem[1].zip
Is this the right thing: http://forum.xda-developers.com/showthread.php?t=1604707
I'll try and make one
MaxGQC said:
I think I flashed I747 BL on I747m. The filename was I747_UCDMG2_Firmware_Modem[1].zip
Is this the right thing: http://forum.xda-developers.com/showthread.php?t=1604707
I'll try and make one
Click to expand...
Click to collapse
I am not going to discourage anyone from trying to save their phone, but I really think you will wind up using a jtag service.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
MaxGQC said:
I think I flashed I747 BL on I747m. The filename was I747_UCDMG2_Firmware_Modem[1].zip
Is this the right thing: http://forum.xda-developers.com/showthread.php?t=1604707
I'll try and make one
Click to expand...
Click to collapse
That's it. Good luck.
Just for ****s and giggles since the computer recognizes the phone when plugged in, try to use odin to see if you get a connection light.. if so, attempt to flash mr robinsons stock rooted image.
Edit: that is taking into consideration that you weren't on 4.3 stock before you bricked
Sent from my SAMSUNG-SGH-I747 using Tapatalk
MaxGQC said:
I think I flashed I747 BL on I747m. The filename was I747_UCDMG2_Firmware_Modem[1].zip
Is this the right thing: http://forum.xda-developers.com/showthread.php?t=1604707
I'll try and make one
Click to expand...
Click to collapse
You can try this http://forum.xda-developers.com/showthread.php?t=2549068 but it is likely to not work being that you flashed a different models bootloader, if it doesn't work start looking for a jtag service.
The link has a 4.1.2 debrick and 4.3 debrick for the i747m you guys can also flash 4.3 via Odin where as us AT&T guys can't.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I tried the DIY USB Jig without success
I sent the phone to a repair shop for JTag service