I just downloaded El26 kernel and installed CM 10.1 onto my phone. I am now looking for the latest compatible kernel and modem with Cyanogenmod 10.1 for the Epic 4G Touch. I see JB TW kernels and modems but I do not understand if they are compatible with CM or do I have to use the latest ICS kernel and modem with CM for right now? Any help would be appreciated, Thank you.
xlPhobialx said:
I just downloaded El26 kernel and installed CM 10.1 onto my phone. I am now looking for the latest compatible kernel and modem with Cyanogenmod 10.1 for the Epic 4G Touch. I see JB TW kernels and modems but I do not understand if they are compatible with CM or do I have to use the latest ICS kernel and modem with CM for right now? Any help would be appreciated, Thank you.
Click to expand...
Click to collapse
CM 10.1 comes with its own kernel. You should use that. There is no need to flash another kernel.
As for modems, any of the ICS modems should work fine. Lots of people like FI27. Or, If you're already on ICS, just keep that modem. There is no need to flash another modern in that case.
Hope that helps.
Sent from my SPH-D710 using xda premium
johanwanderer said:
CM 10.1 comes with its own kernel. You should use that. There is no need to flash another kernel.
As for modems, any of the ICS modems should work fine. Lots of people like FI27. Or, If you're already on ICS, just keep that modem. There is no need to flash another modern in that case.
Hope that helps.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
EL29, FF18, FH13, FI27, and FL24 have had pretty good or better results for most users: I'd try those first, then if none of those give you acceptable performance (which is unlikely), move on to the ICS leaked modems.
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Related
I'm running CM9 alpha 4. Just wondering what the best/most recent custom kernel for flashing would be?
Sent from my SPH-D710 using Tapatalk
orangemonster said:
I'm running CM9 alpha 4. Just wondering what the best/most recent custom kernel for flashing would be?
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
i would use the FE22 plus (Plus = unlocked recovery, initd, bootanim, usb-ms, adb-root)
located here
remember to use the EL26 cwm
There's a thread stickied right in the development section that has pretty much every kernel you need. Also the only kernel you should use on cm9 are the cm9 ones. The one listed above will cause the ROM not to boot past the samsung logo.
FE22 latest CM9 kernel here
im0rtalz said:
There's a thread stickied right in the development section that has pretty much every kernel you need. Also the only kernel you should use on cm9 are the cm9 ones. The one listed above will cause the ROM not to boot past the samsung logo.
FE22 latest CM9 kernel here
Click to expand...
Click to collapse
oh really i was not aware of that
i want to flash cm 10 i wanna know which modem and kernal work best with this rom in the LA area.. any suggestins? i just flashed rom and gapps through cwm5 and it worked ok but then i tryed odin the fh13 kernal but it didnt reboot it just showed the sg2 sign and turned off :fingers-crossed: help pleasee
The kernel that comes with the rom and ff18 modem.
Sent from my SPH-D710 using xda app-developers app
cris_epic said:
but then i tryed odin the fh13 kernal but it didnt reboot it just showed the sg2 sign and turned off :fingers-crossed: help pleasee
Click to expand...
Click to collapse
LOL Last I checked there is no FH13 repack for CM10, FH13 is a TouchWiz kernel you cant just flash it with an AOSP rom.
rovar said:
The kernel that comes with the rom and ff18 modem.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
mmm oh ok.
do i flash the ff18 moden through one click? because currently it says it has ff11 modem
RainMotorsports said:
LOL Last I checked there is no FH13 repack for CM10, FH13 is a TouchWiz kernel you cant just flash it with an AOSP rom.
Click to expand...
Click to collapse
also the fact that, and I do believe, that the kernel included with CM10 is based off of sbrissen's kernel, which is based off of the smdk4210 common kernel, or simply, the international sgs2 kernel, which would need certain proprietary files from the international sgs2 in order for the phone to boot.
RainMotorsports said:
LOL Last I checked there is no FH13 repack for CM10, FH13 is a TouchWiz kernel you cant just flash it with an AOSP rom.
Click to expand...
Click to collapse
ohh yeah thing was i downloaded the tar files from the one click thread and tryed odin it..
hey i see you have fh13 modem on cm10 how is the LoS with that modem/?
times_infinity said:
also the fact that, and I do believe, that the kernel included with CM10 is based off of sbrissen's kernel, which is based off of the smdk4210 common kernel, or simply, the international sgs2 kernel, which would need certain proprietary files from the international sgs2 in order for the phone to boot.
Click to expand...
Click to collapse
right so i think kernal is doing great only thing is battery life is kinda deadly but overall rom is very smooth and i think this will be my daily driver.
i just wannna find the right modem so i dont have alot of LoS issues
New E4GT user here. I'm rooted and on EL29, what is the latest build or baseband number and how do you update to it?
I want to update to Jelly Bean, but I understanding that with this phone, you can't just flash any ROM you want, correct? It has to "match" your build or baseband number?
Neo3D said:
New E4GT user here. I'm rooted and on EL29, what is the latest build or baseband number and how do you update to it?
I want to update to Jelly Bean, but I understanding that with this phone, you can't just flash any ROM you want, correct? It has to "match" your build or baseband number?
Click to expand...
Click to collapse
Latest "Official" OTA Thread by RWilco - No root and rooted links.
Latest stock Leak thread by RWilco Best stock leak imo..
As far as JB builds go, my only suggestion is to read each thread of the rom that interests you in it's entirety. Mixed reviews and different issues, different ways of flashing.. etc..
baseband = modem - mix and match to find the best performance for you and your phone. You can run a ICS generation modem on a GB build, and vice versa.
Check out the op in the Modem Repository by RWilco. How to flash and all the links provieded there.
Build and kernel match (usually) based on the rom. Just follow the Op's instructions on the rom thread. read for any issues etc.
Thanks for the great info!
So, when I flash a new ROM, does it comes with a matching kernel and baseband? I'm still a bit confusing about that.
Most or all Roms come with kernel, some, if you use Odin will include modem. I usually double check and flash the modem that I want via cwm...
Sent from my SPH-D710 using xda app-developers app
Depending on the dev of the rom.
Yes, most include a kernel in a custom rom since it is the easiest way to keep what they build to an error free environment.
You may find a custom "rom only" but that is rare.
Stock roms (vendor leaked or "official" ) you will find complete sets in one clicks and tars. Then, usually, you will find it in separate pieces in the reference section. In Rwilcos posts, they are found in post 2.
With your goal of going to JB, you dont have to go to the latest stock.
You can go to a custom recovery, like el26 cwm or a safe Agat recovery, and try out a JB build. There are several good ones in the dev section.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Neo3D said:
New E4GT user here. I'm rooted and on EL29, what is the latest build or baseband number and how do you update to it?
I want to update to Jelly Bean, but I understanding that with this phone, you can't just flash any ROM you want, correct? It has to "match" your build or baseband number?
Click to expand...
Click to collapse
Welcome from the Nexus, Neo
Sent from my Galaxy Nexus using xda app-developers app
times_infinity said:
Welcome from the Nexus, Neo
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Whaaa? I usually see it going the other way around.
Sent from my SPH-D710 using XDA
The latest official i believe is fh13, ICS not JB. There is a leak fh23 and fi03. I am on fi03 stock with root...
Having said that there are JB Roms but I've heard that they look great but are not daily use candidates yet...
Sent from my SPH-D710 using xda app-developers app
I can't believe I'm about to troll but I am..
Instead of playing "Haaaaave ya met Ted?" Lets play "Haaaaave ya met post #2?"
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
cd7 said:
The latest official i believe is fh13, ICS not JB. There is a leak fh23 and fi03. I am on fi03 stock with root...
Having said that there are JB Roms but I've heard that they look great but are not daily use candidates yet...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I'm on PA2.1 and its definitely daily driver worthy idk what JB roms you've seen that aren't. Everything I'm PA works like it should and its based off of sbrissens aosp and phantomphreaks cm10 vendor trees. Which would make both of those roms just as stable if not more so than PA, and aokp JB is based off the same vendor trees so it should be just as good.
We are legion, for we are many.
Sent from the DarkSide of the GalaXy with a MEK device
Neo3D said:
New E4GT user here. I'm rooted and on EL29, what is the latest build or baseband number and how do you update to it?
I want to update to Jelly Bean, but I understanding that with this phone, you can't just flash any ROM you want, correct? It has to "match" your build or baseband number?
Click to expand...
Click to collapse
Remember to just keep it simple, "New E4GT user here" you should sample some ics and see how that works for you and understand how to go back to your "original state"before you go into jb territory being that ics thought not perfect yet has more stability than jb at the present. Like Mo said read and reread before you take the plunge.
(No dis EviL)
Pp.
Sent from my ginger infused Mayan calculator.
cd7 said:
The latest official i believe is fh13, ICS not JB. There is a leak fh23 and fi03. I am on fi03 stock with root...
Having said that there are JB Roms but I've heard that they look great but are not daily use candidates yet...
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I've been using PhantonPfreek's CM10 ROM for a week now. While not perfect yet, it is a Daily Driver. Most of the major bugs have been handled. currently Bluetooth and headset volune is a problem. This ROM is very close to becoming an official CM rom according to Phantom. i came over from AOKP Mil6. This ROM is its equal. Of course JB features added icing to the cake. I'd say have at it. just make sure that you are on a safe kernal to flash from.
I already did a search on this question and wasnt really sure if it was only for the MIUI rom or if it was okay to flash any rom and it would still work. I want to flash the AOKP JB rom for the AT&T galaxy 3 to my Tmobile galaxy 3, is it possible to flash this rom and have everything working to? Thanks in advance
I can't answer your question, but I have one of my own. What's wrong with the TMo AOKP builds?
Nothing. I'm actually using their latest one right now but I wanted to see what the difference is. Sorry, I don't know much about rooting, I just know how to do it. And I like to try out and use different things
I am running task and ktoonez aokp from att on my t mobile s3 right now. It's been running good so far. No problems. Everything working fine. Using the ktoonez kernel too that is in the post.
Sent from my SGH-I747 using xda app-developers app
You can flash them fine but there shouldnt be any difference between them
So I installed an EL29 repack on my boss' phone and I was thinking about getting him up to date on GB08. Can I just 1-click over the top of what he has? Or do I need to unroot him first?
edufur said:
So I installed an EL29 repack on my boss' phone and I was thinking about getting him up to date on GB08. Can I just 1-click over the top of what he has? Or do I need to unroot him first?
Click to expand...
Click to collapse
One clicks clear everything. It will do no harm to use that. Now if you were planning to flash a custom ROM in CWM, that would be different.
Are you flashing the entire ROM and modem? Jb kernels and modems will not work with ics or gb.
You'd have to read the threads associated with the builds to find that out though...
Seems like a lot of questions that have obvious answers from someone with your "experience"
Why not flash him to CM10?
Sent from my SPH-D710 using xda premium
Stryke_the_Orc said:
Are you flashing the entire ROM and modem? Jb kernels and modems will not work with ics or gb.
You'd have to read the threads associated with the builds to find that out though...
Seems like a lot of questions that have obvious answers from someone with your "experience"
Why not flash him to CM10?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Haaaaaaaaah! Lol.
Pp.:beer::thumbup:
sent from a jellybean filled epic touch.