Develop Bugs

[Q] Change device id for wifi?

My wife and I both have evo's. When at home on wifi my netgear wgr614v7 router seems to have issues connecting both properly. It seems to be a device name problem. Both phones have the same name, different mac addresses but the router us giving them both the same ip address. I have setup static routes to each phone, which helps get different ip's, but I'm still having connection problems with one phone when both are being used.
Is there a way to change the name that my evo broadcasts to my router?
Hers is stock and I am using Fresh's rom.

travlincablguy said:
I have setup static routes to each phone, which helps get different ip's
Click to expand...
Click to collapse
They will anyway get different IP's (I'm talking about private IP 192.168.*.*), for device id maybe someone can edit that in .wireless tether .apk for you because as far I can see that part is kind of integrated and hidden inside.

I am not using the tether function. The static route I setup ensures that every time my evo with it's mac address ending in :d2 always gets 192.168.0.6, Heather's phone is always .3.
Thanks for your input, but I don't think you understood what I was asking.

travlincablguy said:
My wife and I both have evo's. When at home on wifi my netgear wgr614v7 router seems to have issues connecting both properly. It seems to be a device name problem. Both phones have the same name, different mac addresses but the router us giving them both the same ip address. I have setup static routes to each phone, which helps get different ip's, but I'm still having connection problems with one phone when both are being used.
Is there a way to change the name that my evo broadcasts to my router?
Hers is stock and I am using Fresh's rom.
Click to expand...
Click to collapse
I'm thinking you could change the device name in the build.prop in the system folder.

Ahhah, thank you sir, I will look into that.
Edit: after looking threw build.prop I could not find the device id. Which is a bummer. I finally talked my wife out of her iphone and she is now a bit pissy about not being able to use the internet at the same time. No 3 or 4g service at the house either. We have to use an airrave to talk on the phone.

What's the device name in your router?
Also, FWIW, your router shouldn't have any problems with two different MAC addresses connecting. DHCP ID is irrelevant. It sounds more like your problem is a bad router, you're on the edge of its range, or there's something deeper wrong (ie, some other piece of network hardware). As far as I know, you can't change the DHCP Client ID on the phone. It's always been android_(sting of letters/numbers) for me, and it correlates with the Exchange device ID (if you use an Exchange account).

That is the id that shows up. I am thinking the router needs to go. I cannot live without any of the devices that I have connected to it. I do appreciate your insight.

Heh, you good sir are in luck:
http://review.cyanogenmod.com/#change,2164
http://review.cyanogenmod.com/#change,2165
CyanogenMod 7 ('unno about 6) just got a feature to let you change the DHCP client ID.

[Q] Different Wi-fi profiles

Can somebody confirm that 4.0 supports multiple wi-fi profiles? 2.3 had the issue that you could not have multiple wi-fi settings with each their own static info/IP. You are forced to changed it every time you go to a wireless network which requires static info.

Ves said:
Can somebody confirm that 4.0 supports multiple wi-fi profiles? 2.3 had the issue that you could not have multiple wi-fi settings with each their own static info/IP. You are forced to changed it every time you go to a wireless network which requires static info.
Click to expand...
Click to collapse
What kind of wireless access point requires that you supply static IP anyway? It's almost always dynamic IP with DHCP or static IP bound to MAC address assigned with DHCP..

A number of routers I connect to, to bind every internal IP to a certain IP number

Ves said:
A number of routers I connect to, to bind every internal IP to a certain IP number
Click to expand...
Click to collapse
You should do this with static IP reservations with MAC addresses, and not rely on clients to supply their own static IPs.

I got my answer since I have the phone.

WiFi Keeps Dropping/Disconnecting Through Second Router

First of all, I have internet from Time Warner Cable and it came with a router/modem all in one. Now that was initially set up and that works 100% perfectly with my SGS2. Since I have a weak WiFi signal upstairs in a couple of rooms, I decided to hook up an extra router that is set up as an access point. The second router is connected via a cat5e lan to lan to my main router (home is wired with cat5e connections).
Now on the second router, I have disabled DHCP since the main router is responsible for that. On the second router, I set up a different SSID first to test it out. All wired and wireless connections worked great through my laptop/Xbox 360, PS3. My SGS2 connected fine as well and worked.
Now the issue is that the SGS2 "drops" the WiFi after some time. Sometimes it happens after 5 minutes, sometimes 30 minutes, etc. Even with the SGS2 right next to the router it happens. Meanwhile, my laptop stays connected the whole time.
I can't seem to figure out what the issue is now. I've reset the second router a couple times and set it up all over fresh but it doesn't fix the problem. Seems to be a problem with my brother's Sensation as well. Is there something with Android and access points or going through a second router that causes issues? Any other settings I'm overlooking? SGS2 connected to the main router stays connected until I turn WiFi off. But to the access point, it drops out after some time.
FYI: Second router (access point) is running DD-WRT firmware.
If you need any other info, just ask. I'll be home from work in a couple hours. I've been messing with this for the last 2 weeks but nothing seems to work. Please help! Thanks.

Hmm thats very odd. Im running a similar setup as you, except my main and 2nd router connect via 5ghtz N.
Have you tried statically your phone with an IP address then modifying your main router (that gives DHCP) to reflect that IP is permanently assigned?
edit: to hard set your phone...settings-->wireless and network-->wifi settings, then menu key and advanced. Just fill in the IP and gateway info, and obviously use something in your DHCP subnet. You'll have to look at your DHCP subnet, but you'll probably use 255.255.255.224 as your mask, and use your gateway (your main router IP) as your DNS.

shorty87 said:
First of all, I have internet from Time Warner Cable and it came with a router/modem all in one. Now that was initially set up and that works 100% perfectly with my SGS2. Since I have a weak WiFi signal upstairs in a couple of rooms, I decided to hook up an extra router that is set up as an access point. The second router is connected via a cat5e lan to lan to my main router (home is wired with cat5e connections).
Now on the second router, I have disabled DHCP since the main router is responsible for that. On the second router, I set up a different SSID first to test it out. All wired and wireless connections worked great through my laptop/Xbox 360, PS3. My SGS2 connected fine as well and worked.
Now the issue is that the SGS2 "drops" the WiFi after some time. Sometimes it happens after 5 minutes, sometimes 30 minutes, etc. Even with the SGS2 right next to the router it happens. Meanwhile, my laptop stays connected the whole time.
I can't seem to figure out what the issue is now. I've reset the second router a couple times and set it up all over fresh but it doesn't fix the problem. Seems to be a problem with my brother's Sensation as well. Is there something with Android and access points or going through a second router that causes issues? Any other settings I'm overlooking? SGS2 connected to the main router stays connected until I turn WiFi off. But to the access point, it drops out after some time.
FYI: Second router (access point) is running DD-WRT firmware.
If you need any other info, just ask. I'll be home from work in a couple hours. I've been messing with this for the last 2 weeks but nothing seems to work. Please help! Thanks.
Click to expand...
Click to collapse
Try giving your phone a static IP from your main router. Also make sure that you adjust your phones wifi settings under advanced settings so that your phone stays connected to wifi during sleep. Hope that helps.
Sent from my SAMSUNG-SGH-T989 using XDA

blackangst said:
Hmm thats very odd. Im running a similar setup as you, except my main and 2nd router connect via 5ghtz N.
Have you tried statically your phone with an IP address then modifying your main router (that gives DHCP) to reflect that IP is permanently assigned?
edit: to hard set your phone...settings-->wireless and network-->wifi settings, then menu key and advanced. Just fill in the IP and gateway info, and obviously use something in your DHCP subnet. You'll have to look at your DHCP subnet, but you'll probably use 255.255.255.224 as your mask, and use your gateway (your main router IP) as your DNS.
Click to expand...
Click to collapse
Well my phone is getting the same IP address each time, whether I connect to the main router's SSID or the second router's SSID. But I will try this static IP. One problem is that I don't know how to find out my DHCP range. There's nothing in the main router's settings about the range. The second router has an option to set the IP address range for DHCP but the main router doesn't. See attached image.
I'll try to set the static IP around what the IP addresses of other devices on the network are since I don't know the exact range. Let me know if I'm doing this wrong. Not sure what you meant by 255.255.255.224 there.

The static IP didn't make a difference. Still keeps disconnecting/dropping after some time. Meanwhile, the connection with the main router stays connected. Don't know what else I can do. Seems that my HP Touchpad running CM9 stays connected to the second router without dropping. Don't know what's different about that from my phone.
Sent from my SGH-T989 using XDA

Does anybody have some instructions on how to set up the second router as an access point? I'm pretty sure I set it up correctly but apparently there seem to be some issues. People who have a similar setup that can help would be great.
Main router from cable company with built in modem where internet connectivity comes from is downstairs. Connect cat5e from LAN of main router to LAN of second router upstairs. Second router set up as access point for better WiFi coverage upstairs.
2 options for second router: DD-WRT D-Link DIR-615 or D-Link DIR-625.
"Could" buy some other recommended router for this and try that if needed, but would definitely prefer to use what I have and get this to work.

This might be completely off but I had a similar issue with my SII when connecting to 802.1x networks at my University. I downloaded this app called wifi fixer and it resolved the wifi connection drop for about 90% of the time. Give it a shot, it might do wonders for ya.

iLeopard said:
This might be completely off but I had a similar issue with my SII when connecting to 802.1x networks at my University. I downloaded this app called wifi fixer and it resolved the wifi connection drop for about 90% of the time. Give it a shot, it might do wonders for ya.
Click to expand...
Click to collapse
I tried it and it didn't work. I think it's something to do with DHCP or some other settings.
Sent from my SGH-T989 using XDA

shorty87 said:
Does anybody have some instructions on how to set up the second router as an access point? I'm pretty sure I set it up correctly but apparently there seem to be some issues. People who have a similar setup that can help would be great.
Main router from cable company with built in modem where internet connectivity comes from is downstairs. Connect cat5e from LAN of main router to LAN of second router upstairs. Second router set up as access point for better WiFi coverage upstairs.
2 options for second router: DD-WRT D-Link DIR-615 or D-Link DIR-625.
"Could" buy some other recommended router for this and try that if needed, but would definitely prefer to use what I have and get this to work.
Click to expand...
Click to collapse
First you need to find out if your router is supported. According to the DD-WRT database, the 615 is, the 625 is not. But there are several revisions of that router, so you need to find out what revision you have. It should be on your label.
Router database
Then you need to decide whether you want a repeater, an access point, or client bridged. You can read the differences in the DD-WRT wiki found HERE
Then you need to find the best build to flash to your router. I suggest reading the overview of the 615 found HERE. Read the ENTIRE thread. If you flash the wrong version to your router, you WILL brick it.
Then flash the appropriate firmware, set it up, and youre done. Youre going to have to do some reading.
edit: I would also suggest downloading wifi analyzer on your phone and do a site survey of available channels in your house. Most likely you WILL have interference from neighbors. Youre going to want to hard set your channel to the least congested channel, either 1, 6, or 11. Once you get DD-WRT set up on your 615 you can do a site survey within the router as well.

change the channel on your router to 6 not 11 i had that issue with our second router and actually my nook color. Depending on the router it should be under wireless settings.

RaverX3X said:
change the channel on your router to 6 not 11 i had that issue with our second router and actually my nook color. Depending on the router it should be under wireless settings.
Click to expand...
Click to collapse
The only reason to use one over the other is congestion. Thats it. And you want to use 1, 6, or 11 because the DIR615 has N capability, and you need a wifi primary channel to use N. Theres only 3 primary channels...1, 6, and 11.
edit: Heres a technical overview of N: CLICK ME!

blackangst said:
First you need to find out if your router is supported. According to the DD-WRT database, the 615 is, the 625 is not. But there are several revisions of that router, so you need to find out what revision you have. It should be on your label.
Router database
Then you need to decide whether you want a repeater, an access point, or client bridged. You can read the differences in the DD-WRT wiki found HERE
Then you need to find the best build to flash to your router. I suggest reading the overview of the 615 found HERE. Read the ENTIRE thread. If you flash the wrong version to your router, you WILL brick it.
Then flash the appropriate firmware, set it up, and youre done. Youre going to have to do some reading.
edit: I would also suggest downloading wifi analyzer on your phone and do a site survey of available channels in your house. Most likely you WILL have interference from neighbors. Youre going to want to hard set your channel to the least congested channel, either 1, 6, or 11. Once you get DD-WRT set up on your 615 you can do a site survey within the router as well.
Click to expand...
Click to collapse
I have actually done all that. The DIR-615 is an E1 version and I flashed the correct DD-WRT firmware on it. I followed a tutorial from the DD-WRT website to set it up as an access point as well. My laptop works perfectly with it. Just my phone keeps dropping the connection from it. My main router is on channel 11 and the second router is on channel 6. I also tried channel 1 but it didn't help.
I might just to try set it up as a second router on a different subnet than the first router and see if that helps. Going to try to follow this Youtube video and see how it goes.

shorty87 said:
I have actually done all that. The DIR-615 is an E1 version and I flashed the correct DD-WRT firmware on it. I followed a tutorial from the DD-WRT website to set it up as an access point as well. My laptop works perfectly with it. Just my phone keeps dropping the connection from it. My main router is on channel 11 and the second router is on channel 6. I also tried channel 1 but it didn't help.
I might just to try set it up as a second router on a different subnet than the first router and see if that helps. Going to try to follow this Youtube video and see how it goes.
Click to expand...
Click to collapse
Hhmm ok. Well your main router shouldn't have anything to do with it. When it drops does it re-aquire an IP and reconnect? Honestly if a reboot of the router doesn't fix it and your laptop doesn't have the same issue, its pointing to the phone.
Maybe a factory reset?
Sent from my SGH-T989 using XDA

blackangst said:
Hhmm ok. Well your main router shouldn't have anything to do with it. When it drops does it re-aquire an IP and reconnect? Honestly if a reboot of the router doesn't fix it and your laptop doesn't have the same issue, its pointing to the phone.
Maybe a factory reset?
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
It reconnects when I unlock the phone. Sometimes I have to reset the Wifi on the phone. Have set the Wifi connection to never sleep. My brother's Sensation was doing this as well. I'll have to test it out on his phone and see. I'll probably reset my phone later today and see if that works.
Sent from my SGH-T989 using XDA

GN do not compatibility netgear wireless router

i found out the GN do not compatibility with some netgear wireless router...the issue is wifi disconnect after screen lock..i have netgear wireless router model:WNR612V2 and wndr3800..both of them have same issue with my GN..i also have other dlink/tp-link/asus wireless router...and they work fine with my gn....i tried recovery factory setting...also tried flash 4.0.4 and 4.1.1 android version...still same issue... anybody has same issue like me? or found out how to fix it?..TKS for any help...and forgive me poor english...TKS a lot!...

No issues with wndr3700 here.
On your gnex, go to setting gas, WiFi, then press the menu button go to advanced and check the WiFi sleep policy. Make sure it's set always on "keep WiFi on during sleep"
Galaxy Nexus GSM

Have wnr 1000, works perfectly...
Sent from my Galaxy Nexus using xda app-developers app

nxt said:
No issues with wndr3700 here.
On your gnex, go to setting gas, WiFi, then press the menu button go to advanced and check the WiFi sleep policy. Make sure it's set always on "keep WiFi on during sleep"
Galaxy Nexus GSM
Click to expand...
Click to collapse
already set "always on"...never change from got GN...so i don't understand why i got this issue with all my netgear router...my dlink/tp-link works fine...but they all broken...thats why i replace them to netgear...:crying:

One quick thing to look at, that seems to pop up now and then, what's your DHCP lease set to? Setting to '0' (that should be forever) doesn't work as well for some chipsets it appears. If you just have bad luck getting/keeping a lock on your router, try changing the dhcp to something else, 2 weeks ish? Play with it.
Might be something else entirely, but after having seen this 3 times now, it's worth a bash.

Jyveafk said:
One quick thing to look at, that seems to pop up now and then, what's your DHCP lease set to? Setting to '0' (that should be forever) doesn't work as well for some chipsets it appears. If you just have bad luck getting/keeping a lock on your router, try changing the dhcp to something else, 2 weeks ish? Play with it.
Might be something else entirely, but after having seen this 3 times now, it's worth a bash.
Click to expand...
Click to collapse
TKS for replay...seems netgear wndr3800 not allow change the dhcp lease set...there are not option about dhcp lease set...and as my custom...i have set the gn as a static ip...so it may not be effect to the dhcp lease set...both wnr612 v2 or wndr3800...all of them not have option to set dhcp lease...

What type of connection are you using on the wndr3800?
2.4ghz, 5ghz?
And what channel, since you have two routers, make sure they're on different channels and opposite, set one to 1 and the other 11 or 6.
Also what type of security? wep? wpa2?
Try using 2.4ghz, i found the 5ghz isn't very strong/good with gnex.
Also you can try with NO security and see if it works better.
...
worse comes to worse, reset your wndr3800 back to default and regular dhcp no static, no custom settings for anything and go no security on wifi or go wep.
...
Also, since you have 2 routers, you have them set so that only 1 is doing the dhcp and the other is turned off right? you can't have 2 routers doing dhcp.

nxt said:
What type of connection are you using on the wndr3800?
2.4ghz, 5ghz?
And what channel, since you have two routers, make sure they're on different channels and opposite, set one to 1 and the other 11 or 6.
Also what type of security? wep? wpa2?
Try using 2.4ghz, i found the 5ghz isn't very strong/good with gnex.
Also you can try with NO security and see if it works better.
...
worse comes to worse, reset your wndr3800 back to default and regular dhcp no static, no custom settings for anything and go no security on wifi or go wep.
...
Also, since you have 2 routers, you have them set so that only 1 is doing the dhcp and the other is turned off right? you can't have 2 routers doing dhcp.
Click to expand...
Click to collapse
TKS for you replay...both 2.4g/5g..yes..5ghz isn't very strong/good..and i test every possiable setting...include no secuirty/wep/wpa/wpa2...dynamic ip/static ip...nothing change...
i have 3 netgear router..2xWNR612v2..1xWNDR3800... 3800 is a host router...612 connect to 3800 via wire...because there is low signal in the corner of my house..so i use wds to make it stronge...but 3800 only support no/wep to Encryption...and 612 can use wpa/wpa2..and i set the 612 in channel 1...3800 can support auto select the best channel...i used wifi Analysis software to check the channel...in many time...3800 used different channel...so i think it isn't the reason for this issue..i tried independent test every router..got same issue...:crying:

Always worked fine with my 2.4ghz 802.11g (can't remember model#) Netgear router. Never had issues with other routers too.

icilymoo said:
i found out the GN do not compatibility with some netgear wireless router...the issue is wifi disconnect after screen lock..i have netgear wireless router model:WNR612V2 and wndr3800..both of them have same issue with my GN..i also have other dlink/tp-link/asus wireless router...and they work fine with my gn....i tried recovery factory setting...also tried flash 4.0.4 and 4.1.1 android version...still same issue... anybody has same issue like me? or found out how to fix it?..TKS for any help...and forgive me poor english...TKS a lot!...
Click to expand...
Click to collapse
i worked round it by not using DHCP on the phone, change it to manual setting and assign an IP (or keep the current setting) to the device (long press on your connected wifi, then choose modify; for some reason adding new connection only accept DHCP by default). need to do that at the router end as well, edit the lan setting and record the phone MAC address to that IP. someone on another thread mentioned, if my memory serves me right, that GNex can have wifi issue with some routers' DHCP setting, causing it to drop connection when new lease was issued, and this is the reason why i choose not to use DHCP.

TKS,I try it…hope it can work…
Sent from my Galaxy Nexus using xda app-developers app

Gnex takju stock + Netgear WNDR3700 (running DD-WRT) WPA2 PSK = Total failure to connect.
It was fine with ICS, but since the OTA it will not work despite trying every setting and factory reset.

it may cause by DD-WRT…i use netgear stock fireware…never try any 3rd fireware…
Sent from my Galaxy Nexus using xda app-developers app

I tried your suggestion,unfortunately,issue still…in my friend's coffe shop just now…gn wifi works fine with his tplink wireless router…received any push message/email fast under screen lock…so i still believe the issue cause by netgear router…or the setting with it…
Sent from my Galaxy Nexus using xda app-developers app

seem i found out why this issue comes....
the GN can connect to all dlink/tp-link wireless router and never disconnect after screen lock...so i check the advance wirelees setting about three sets include netgear.dlink and tplink...i found the netgear has a few option you can set about advance wireless setting...the other two router have very detail setting about wireless...read the help text...i found the beacon peroid may cause this issue...default value is 100...so i tried to increase the value to 200..oops...the gn disconnect the wifi...and i can't receive any data...just like the email sync,weather sync,and google play push soft install...then i decrease the value to default..the wifi work fine,i can receive any data under the screen lock...then i continue decrease the value to 50/20..nice...no any issue...so i believe is the beacon peroid cause this issue...but the question is the netgear never has a option to let me change the bacon peroid value...so i will connect to the factory...hope they can fix it in the near future...
attachment: what is the beacon peroid
beacons are packets sent by a wireless router to synchronize wireless devices...specify a beacon period value between 20 and 1000 the default value is set to 100 milliseconds...

nxt said:
No issues with wndr3700 here.
On your gnex, go to setting gas, WiFi, then press the menu button go to advanced and check the WiFi sleep policy. Make sure it's set always on "keep WiFi on during sleep"
Galaxy Nexus GSM
Click to expand...
Click to collapse
i tried any possible setting..but nothing changed...can you post me your wireless setting in wndr3700...just like basic wireless settinng and advance wireless setting? ...TKS...

icilymoo said:
i tried any possible setting..but nothing changed...can you post me your wireless setting in wndr3700...just like basic wireless settinng and advance wireless setting? ...TKS...
Click to expand...
Click to collapse
My main router is my FiOS router, that does all the DHCP, I have one of the ports plugged into my WNDR3700's port (not WAN port), I use the WNDR3700 for all WIFI devices.
I have DHCP turned off on the WNDR3700
Basic Wireless Settings
Both 2.4GHz b/g/n and 5GHz a/n I have SSID broadcast on, and set to Up to 300Mbps.
2.4GHz set to Channel 03, and 5GHz set to channel 36
I use WPA2-PSK [AES] for both radios.
In Advance Wireless Settings, it's all default.
Both 2.4GHz and 5GHz are the same:
Fragmentation Length: 2346
CTS/RTS Threshold: 2347
Preamable Mode: Automatic
Transmit Power Control: 100%
That's it, I do have MAC Address Filtering too, but that shouldn't matter.
Again, everything else is default.

nxt said:
My main router is my FiOS router, that does all the DHCP, I have one of the ports plugged into my WNDR3700's port (not WAN port), I use the WNDR3700 for all WIFI devices.
I have DHCP turned off on the WNDR3700
Basic Wireless Settings
Both 2.4GHz b/g/n and 5GHz a/n I have SSID broadcast on, and set to Up to 300Mbps.
2.4GHz set to Channel 03, and 5GHz set to channel 36
I use WPA2-PSK [AES] for both radios.
In Advance Wireless Settings, it's all default.
Both 2.4GHz and 5GHz are the same:
Fragmentation Length: 2346
CTS/RTS Threshold: 2347
Preamable Mode: Automatic
Transmit Power Control: 100%
That's it, I do have MAC Address Filtering too, but that shouldn't matter.
Again, everything else is default.
Click to expand...
Click to collapse
TKS for your reply...every setting is same to yours...except the internet connect through by WNDR3800...my friend got another GN yesterday...and has the same issue in my house (he used tplink in his house,and work fine)...i used his GN do more test with my wndr3800 and wnr612...same issue...
i'll try do most test again and again...
again...TKS for your help...

Failed to obtain IP.

So, weird thing started to happen last night. Both my Samsung devices ( my 2014 10.1 and my S4) started failing to get an IP from my wifi network. It would see the wifi network and report a strong signal, but would fail at the obtaining IP address. The IP assignment is handled by a Windows DHCP service running on a domain controller. I work in IT so I have a fairly extensive lab at home with routers, switches, servers, domain controllers, etc. The wireless access point in my home is a WNDR3700 with no WAN port config as my firewall/routing is done by a Cisco ASA 5505. All the 3700 does is provide wireless access to the network, essentially it acts solely as a wifi AP. Every other wireless device on the network is functioning fine including 3 laptops, a Blackberry and two other Android tablets ( Asus Transformers). So I know nothing is wrong with the dhcp or the AP in general. It's not a security issue as it is not failing on authentication, just on obtaining IP. So as a workaround I configured each one with a static IP and, of course, everything works fine.
One thing I noticed that seemed odd was that when I went to change the IP addr the address that was already in there, but greyed out sort of, was the wrong network for my home wifi. The phone and tablet both looked like they had a 192.168.1.0/24 address whereas my home wifi segment is 192.168.0.0/24. So maybe that had something to do with it. At the office now and both my phone and tablet have no issue connecting to our Cisco APs and getting a dhcp config from a Windows DHCP server. So pretty weird situation. I'm fine with leaving them on static config while on my home wifi network. Was just wondering if anyone else has seen this before?
Thanks

For any that might be interested. I used inSSIDer to find a less crowded channel for my 2.4 ghz band at home and both my Samsung devices are connecting and receiving ip addrs now.