Related
This is a simplified guide for those new to rooting & flashing a custom ROM on the Optimus V. No need to type complex commands that are hard to follow and prone to mistakes. Basically there are 3 main steps: Root, Install custom recovery, & flash custom ROM.
Windows Drivers for the Optimus V (Optional but suggested):
http://www.lg-phones.org/wp-content/uploads/LG-Optimus-V.zip
Rooting
Rooting is the process of gaining administrative rights to the phone so one can do customizations that aren't normally allowed. Root by itself doesn't do anything interesting, unless there's an app that needs it. The fancy stuff comes from custom ROMs. Just remember Virgin Mobile Activation only works on Froyo ROMs, so do it before going to Gingerbread. The easiest way to root nowadays is to use GingerBreak. It can be found here:
[26.04.2011][v1.2] GingerBreak APK (root for GingerBread) - xda-developers
Instruction Steps:
1. Turn on USB Debugging (Settings - Applications - Development)
2. Copy the GingerBreak.apk to a /sdcard dir, then using a 'file manager' app (search for one in Android Market) install it like a regular app.
3. It can take up to 10 minutes, and will reboot automatically when complete (rooted), if attempt fails, reboot manually & run it again.
Install custom recovery image
The recovery image is an alternative bootup instead of normal Android Operating System. It allows low-level operations such as backup/restore a ROM, wipe partitions, and flash ROMs.
4. Download and copy the recovery image VM670NH_recovery.img (works with new & old OV screens) onto your /sdcard.
5. Install the Flash Image GUI app (save the .apk to a /sdcard directory, then open it with file manager) Run the app & select 'Recovery Image' option with the file above.
Flash Custom ROM
I.H.O CyanogenMod 7 ROM (Gingerbread)
6. Copy the unextracted ROM .zip that you wish to install to the /sdcard dir. Also if installing a CyanogenMod Gingerbread ROM, the unextracted gapps.zip also needs to be placed in the same dir to flash right after the ROM .zip.
7. Boot into Clockworkmod recovery mode (From powered off state, hold vol-down, home, and power button until the LG logo appears).
8. FIRST, BACKUP ORIGINAL ROM! Don't continue until this is successful. Use vol-up/down, camera, & back keys to navigate in recovery.
9. Wipe Data/Factory Reset, wipe cache partition. Under Advanced submenu, wipe dalvik-cache. Then uner Mounts & Storage submenu, format all partitions EXCEPT /sdcard.
10. Flash the custom ROM.zip from sdcard and gapps.zip too if going to a CyanogenMod ROM
11. Reboot and enjoy the new ROM, the first boot takes longer than usual, also some problems may disappear after rebooting.
NOTES:
- NEVER use Android Settings 'Factory Reset' from now on, only do factory reset & wipes from within recovery mode. Most ROMs should have this option removed from the Android settings.
- Some newer Optimus V screens hardware changed, see link: [FIX]Black screen with custom recovery and custom roms (BobZHome's IHO recovery from the Wiki binary -> recovery page also works with newer screens.)
- If restoring a backed up ROM in CWM recovery gives 'MD5 mismatch' error (likely caused by renaming a ROM backup). Try this fix:
# cd /sdcard/clockworkmod/backup/<name_of_backup>
# rm nandroid.md5
# md5sum *img > nandroid.md5
- If you ever want to restore to original stock ROM (ONLY on OV's with older screen), with original recovery and UNrooted:
http://www.prepaidandroid.org/index...e_your_Optimus_V_to_almost_original_condition
titanium backup?
Excellent guide for the likes of me (noob), you might wanna mention titanium backup too
help
Hey u have a great step by step guide, however when I run gingerbreak to root it gives me an error I kno u said reboot manually and I did twice and I couldn't get it to work, any thoughts of to why it did this twice thanks
Zachary droid said:
Hey u have a great step by step guide, however when I run gingerbreak to root it gives me an error I kno u said reboot manually and I did twice and I couldn't get it to work, any thoughts of to why it did this twice thanks
Click to expand...
Click to collapse
What is the exact error you're getting? I believe you have to keep retrying, maybe up to 10 times.
Thanks a lot.Real helpful
Will this work for LG Optimus S? It's been difficult to find specific information for this phone.
Thanks.
KidGusto said:
Will this work for LG Optimus S? It's been difficult to find specific information for this phone.
Thanks.
Click to expand...
Click to collapse
the windows drivers and gingerbreak will work.
you'll need an optimus S custom recovery and rom, though. If you use optimus V software, your home and menu keys will be backwards, and there may be other little issues with the network.
look on android central forums for optimus S development and you'll find roms and recoveries no problem.
Thank you for this. The Rom manager method is great, i was afraid not to brick my optimus one with the adb shell crap and pc connection. They should make a nici sticky like this in the euro section, not with adb crap.
Can this guide by updated, with more details?
The menu options in ROM manager are not the same anymore, and I am flailing around trying to figure out which options to hit.
I'm stuck at the LG logo boot up screen after doing what I think is flashing the bumblebee ROM step. (step 10 in the guide).
I used these steps and they worked great for rooting, but I'm having a problem with recovery. I flashed CWM 3.2.0.1 from ROM Manager and it appeared to work fine, but when I try to boot into recovery I just get a blank screen.
I have done the following:
Busybox 1.19.2 from Stericson, installed to /system/bin
Superuser from market, updated to 2.3.6.3, su is 2.3.2-efgh
Used ROM Manager 4.4.0.7 to flash CWM recovery 3.2.0.1
I've tried getting to recovery using Home+Vol Dn+Power, or the reboot menu option in rom manager, and just get the blank screen.
Anyone run into this or have suggestions?
cobraextreme said:
I used these steps and they worked great for rooting, but I'm having a problem with recovery. I flashed CWM 3.2.0.1 from ROM Manager and it appeared to work fine, but when I try to boot into recovery I just get a blank screen.
I have done the following:
Busybox 1.19.2 from Stericson, installed to /system/bin
Superuser from market, updated to 2.3.6.3, su is 2.3.2-efgh
Used ROM Manager 4.4.0.7 to flash CWM recovery 3.2.0.1
I've tried getting to recovery using Home+Vol Dn+Power, or the reboot menu option in rom manager, and just get the blank screen.
Anyone run into this or have suggestions?
Click to expand...
Click to collapse
[fix]black screen in custom recovery or custom roms
you probably have the newer screen type, which it appears the older custom kernels need a .config setting changed before building to support.
you'll have to use flash_image in adb or terminal.
probably. full instructions and downloads at that link.
yay, you didn't flash a rom through rom manager at the same time! or it'd be a lot harder.
bigsupersquid said:
[fix]black screen in custom recovery or custom roms
you probably have the newer screen type, which it appears the older custom kernels need a .config setting changed before building to support.
you'll have to use flash_image in adb or terminal.
probably. full instructions and downloads at that link.
yay, you didn't flash a rom through rom manager at the same time! or it'd be a lot harder.
Click to expand...
Click to collapse
That did the trick! Thanks!
It would be great to get a sticky about this in here. It's pretty easy to miss the newer display issue if you're just now looking into this forum and don't check AC first.
cobraextreme said:
That did the trick! Thanks!
It would be great to get a sticky about this in here. It's pretty easy to miss the newer display issue if you're just now looking into this forum and don't check AC first.
Click to expand...
Click to collapse
Updated original post with link for the new OV screens.
lamenramen said:
Can this guide by updated, with more details?
The menu options in ROM manager are not the same anymore, and I am flailing around trying to figure out which options to hit.
I'm stuck at the LG logo boot up screen after doing what I think is flashing the bumblebee ROM step. (step 10 in the guide).
Click to expand...
Click to collapse
ROM Manager is only supposed to be use to flash the Clockworkmod recovery image, then everything else is done by booting into the recovery mode. ROM manager's other features should not be used on the OV.
Whyzor said:
Updated original post with link for the new OV screens.
...
Click to expand...
Click to collapse
the only big problem left is getting the "back to stock" up to par for the newer OV's...
if someone could upload the critical part of a nandroid made from the newer stock system after rooting but before installing a custom rom, a more up-to-date back to stock guide could be put up with the newer files, or at least the older files patched with the newer kernel.
anyone want to upload the boot.img from a first nandroid backup off of a newer ov? the boot.img doesn't have any personal info, and it's got the newer kernel, which is all that's needed to fix up the older back-to-stock nandroid files.
bigsupersquid said:
the only big problem left is getting the "back to stock" up to par for the newer OV's...
if someone could upload the critical part of a nandroid made from the newer stock system after rooting but before installing a custom rom, a more up-to-date back to stock guide could be put up with the newer files, or at least the older files patched with the newer kernel.
anyone want to upload the boot.img from a first nandroid backup off of a newer ov? the boot.img doesn't have any personal info, and it's got the newer kernel, which is all that's needed to fix up the older back-to-stock nandroid files.
Click to expand...
Click to collapse
I think there's about an 85% chance that this contains the kernel that you're looking for; not sure if you have some way to deal with that 15% uncertainty but hopefully it's helpful.
Questions about ROM Manager
Hi, can I get a clear clarification about installing the ROM Manager on my LG Optimus p500, when your about to install the ClockwordMod Recovery you would have to select the phone model. LG p500 is not listed. Is there an alternative to it?
luwizwiz said:
Hi, can I get a clear clarification about installing the ROM Manager on my LG Optimus p500, when your about to install the ClockwordMod Recovery you would have to select the phone model. LG p500 is not listed. Is there an alternative to it?
Click to expand...
Click to collapse
This thread is under the Optimus V development section, you should ask questions about the p500 in this forum section:
http://forum.xda-developers.com/forumdisplay.php?f=839
Thanks, i didn't notice that its for Optimus V, i have a Optimus One. many thanks
Complete noob here, I mean a complete noob...first cell phone.
I was hoping to tether my new OV, but i quickly found out i have software version 2.2.2 which does not allow me to turn on hot spots. So I heard I can root my phone to get around this. I did stes 1-3 without issue, now I am stuck on step 3a. When i try to install busybox (not sure what this does for me?), i get the follow error/message "It looks like you have Busybox installed, but there are multiple copies still installed. /system/bin/ is currently as RW. This means that something may have gone wrong in the installation process. Please verify on your end that everything is correctly installed and working.
What do I verify? There is no Busybox app to run, only to install so it looks like the install failed?
ct200 said:
Complete noob here, I mean a complete noob...first cell phone.
I was hoping to tether my new OV, but i quickly found out i have software version 2.2.2 which does not allow me to turn on hot spots. So I heard I can root my phone to get around this. I did stes 1-3 without issue, now I am stuck on step 3a. When i try to install busybox (not sure what this does for me?), i get the follow error/message "It looks like you have Busybox installed, but there are multiple copies still installed. /system/bin/ is currently as RW. This means that something may have gone wrong in the installation process. Please verify on your end that everything is correctly installed and working.
What do I verify? There is no Busybox app to run, only to install so it looks like the install failed?
Click to expand...
Click to collapse
If you go into 'adb shell' from the PC with phone connected, or open the app 'terminal emulator' to get a unix prompt, and type 'busybox', you should see a list of commands. If you get a no command found, then it's not installed. It's suggested to install so you can run unix commands, but not really needed. Root & custom recovery are the important ones. You're probably safe to continue, just make sure to make a backup in recovery mode before doing anything else.
Ok, I'm completely self taught as far as this whole arena of technology is concerned. So please bear with me. I rooted using kindle water and clockwork mod was installed as my recovery. But, I need twrp to install any of the 3.0 kernels. Can I install twrp with clockwork mod still on my device our do I need to remove it somehow? Any advice would be great.
No, I don't think it's even remotely possible.
There are several methods you can use to install TWRP; fastboot, script, KFU, depending on whatever you're most comfortable with.
Before you do so I'd highly suggest you read and understand what is laid out in this guide: http://forum.xda-developers.com/showthread.php?t=1552547 (first, second and third posts)
It'll save you a lot of trouble when things "go bad".
Thanks for the reply!
Stage said:
Ok, I'm completely self taught as far as this whole arena of technology is concerned. So please bear with me. I rooted using kindle water and clockwork mod was installed as my recovery. But, I need twrp to install any of the 3.0 kernels. Can I install twrp with clockwork mod still on my device our do I need to remove it somehow? Any advice would be great.
Click to expand...
Click to collapse
Actually, if you wanted to have a completely wacky setup...
They are all boot images, so you can leave CWMR on your recovery partition and flash your boot partition with TWRP. Then you would "normally" boot into TWRP and selecting recovery will take you to CWMR as it did before. If you ever want to boot ICS, you can "fastboot boot" the ICS boot.img file and it should boot into the system for you. This is just all in theory, I've never done anything this insane, but it should work if you wanted.
Now, for a more practical approach....
You can leave CWMR on your recovery partition and just "fastboot boot" the TWRP image. That would get you a "per boot" access to TWRP without ever flashing it onto your device. If all you want to do is flash ICS with it, then this is a doable setup and would just require the extra step of booting directly from the TWRP recovery image with fastboot.
Well I'm on CM9 by hellfire right now so ICS is definitely possible. Just wanted to get HWA going.
Just to piggyback on the OP and maybe a more direct question.
I currently have CWMR installed. Can I simply use KFU to replace it with TWRP by choosing option 3?
dferrey said:
Just to piggyback on the OP and maybe a more direct question.
I currently have CWMR installed. Can I simply use KFU to replace it with TWRP by choosing option 3?
Click to expand...
Click to collapse
That would answer my question add well. Anyone?
dferrey said:
Just to piggyback on the OP and maybe a more direct question.
I currently have CWMR installed. Can I simply use KFU to replace it with TWRP by choosing option 3?
Click to expand...
Click to collapse
Stage said:
That would answer my question add well. Anyone?
Click to expand...
Click to collapse
KFU's TWRP installer is either broken or will install TWRP 2.0.0 (broken reboot) and FFF 1.0 (4 generations old) together. You can either tinker with its run.bat file or learn to use fastboot if you want the latest stuff installed. The latter makes more sense to me...
http://forum.xda-developers.com/showthread.php?t=1552547
The fastboot section is in post #3.
kinfauns said:
KFU's TWRP installer is either broken or will install TWRP 2.0.0 (broken reboot) and FFF 1.0 (4 generations old) together. You can either tinker with its run.bat file or learn to use fastboot if you want the latest stuff installed. The latter makes more sense to me...
http://forum.xda-developers.com/showthread.php?t=1552547
The fastboot section is in post #3.
Click to expand...
Click to collapse
Dang, reading for comprehension is not my strong suit sometimes. I read that guide yesterday and it specifically addresses my question and also says I can play with images without installing them way cool.
Thanks for pointing me in the right direction.
what is the real difference between cwm and twrp besides the interface? I like twrp but i also like to use rom manager when on another rom besides stock....also im using bootmanager for my tri-boot needs... What is the problem with cwm and 3.0 kernel?
I believe that Hashcode updated CWM to support 3.0 ROMs (Check the dev section).
I started with TWRP then CWM. Then I wanted to flash 3.0 ROMs so I used KFU to flash TWRP (Hope that helps someone).
I have not tested the new CWM yet as this old version of TWRP does what I need it to.
hgigh said:
I believe that Hashcode updated CWM to support 3.0 ROMs (Check the dev section).
I started with TWRP then CWM. Then I wanted to flash 3.0 ROMs so I used KFU to flash TWRP (Hope that helps someone).
I have not tested the new CWM yet as this old version of TWRP does what I need it to.
Click to expand...
Click to collapse
I believe that CWM is more streamlined in that it can work with ROM Manager as well, whereas TWRP requires you go to recovery in order to flash anything. However, I like to stick with TWRP for its ability to compress backups, since there isn't much free space on the Fire. I'll probably switch over to CWM eventually, but, like you, TWRP does just what I need.
YayILikePie said:
I believe that CWM is more streamlined in that it can work with ROM Manager as well, whereas TWRP requires you go to recovery in order to flash anything. However, I like to stick with TWRP for its ability to compress backups, since there isn't much free space on the Fire. I'll probably switch over to CWM eventually, but, like you, TWRP does just what I need.
Click to expand...
Click to collapse
I agree completely! Not much space at all. ROM Manager is cool but I have had more problems than solutions using it (G2X) so I am used to going into recovery to flash (CWM included).
thanks for the help. Im used to using rom manager/cwm on my indulge so im not really used to having to go into recovery for everything. but as stated earlier with the limited space on the kindle ill still with twrp then so i can compress my backups. also stated rom manager will have some problems untill they can find a way to link cwm for kindle fire to rom manager otherwise you will run into the same issues that happens when you use it with twrp....it boots into recovery and then does nothing else. lol
Alright so I tried installing TWRP via goo manager. I downloaded the app and installed the openrecoveryscript. It shows that it's installed, yet whenever I tried and reboot into recovery it still boots into clockwork... I have gone as far as trying to delete Rom Manager app from my phone and I tried installing the openrecoveryscript again. Any suggestions on how I should go about fixing this. I`m currently running 11.0-installerXNPQ02R.
NOTE: If anyone has any further questions about recoveries on the S3, please note that I have moved on to another device. Sorry!
So you've got your device rooted, and you want to install a custom recovery? Great! Don't just follow any guide you stumble across though, as some of the early recovery packages for the "AT&T" model were actually just copies of the custom Sprint recovery, and then you'll have all sorts of fun trying to install ROMs. ("Status 7" errors anyone? )
I'd like to talk about 4 ways to get the custom recovery of your choice onto your device.
Using mskip's Toolkit CWM [link]
Follow the instructions posted in his thread, and if you have any problems, direct them there as well!
Using ROM Manager CWM [link]
For some reason, ROM Manager doesn't always offer the correct list of devices to flash a recovery for and you won't see the SGS3 (AT&T) in the list. If that happens, force-close the app from Settings > Applications and try again. If this method just won't work for you, move on to option 4.
Using GooManager TWRP [link]
If you've been looking at ROMs, you may have noticed Goo.IM is a popular hosting website for Android developers. It's so popular, in fact, that they have produced an Android app that searches their website for updates for your ROM, and can even install TWRP with only a few simple clicks! Just open up GooManager, tap Menu, and tap "Install OpenRecoveryScript". You will be guided step-by-step from there by the app.
Note: Some people (myself included) have reported issues with this method, where the app claims to have installed the recovery, but when you reboot into recovery mode, nothing has changed. This issue may have been resolved in newer versions; I was able to successfully install TWRP using this method on Sept 26 2012.
Manually via ADB or Terminal Emulator CWM or TWRP [Terminal Emulator link]
If the other options just won't work for you, or if you would rather do an install by hand to ensure you're getting the latest version, read on...
Manually Installing a Recovery
While this may seem difficult, it's really not. Grab a recovery image (these files end in ".img") such as ClockWork Mod (CWM) or Team Win Recovery Project (TWRP) for your device. Most ROM developers say to use CWM, but they both work equally well.
In our case, we need an image for the Samsung Galaxy S3 AT&T. Telus, Rogers, Bell, and SaskTel phones are (almost*) the exact same phone as AT&T, if you have one of these devices, you will be installing the AT&T recovery.
Now, transfer the ".img" file you downloaded onto your device. I'd suggest somewhere with a nice short path, like "/sdcard/<file>.img" (you'll thank me later, especially if you're using terminal emulator on the device)
Now, let's back up your existing recovery. If things go wrong, you can use this backup to get back to where you started.
Code:
$ su
# dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery-backup.img
That should have created a "recovery-backup.img" on your phone's internal storage.
Here's the part you've been waiting for: Flashing the new image, which installs it as your recovery system. You do this from either an ADB shell or inside Terminal Emulator.
Code:
$ su
# dd if=/sdcard/[B]<file>[/B].img of=/dev/block/mmcblk0p18
You're done. Reboot into your new recovery by holding VolUp and Home while you power on your device.
If you need to return to the stock recovery, that IMG can be downloaded here: stock-recovery.img - 10.00 MB
*NOTE: While we're on the topic, let's take a second to talk about what makes the Canadian I747M different from the AT&T I747.
The short version is... The modem. AT&T is using completely different and incompatible modem firmware in their phones when compared with the Canadian models. Rogers, Bell, Telus, and any other Canadian I747M are the same device (Samsung worked some strange voodoo and got all the Canadian carriers to agree on the same hardware!) which means that if Rogers releases a new modem firmware update, a SaskTel user could install it without issue. AT&T modem updates will not work on Canadian models, nor will Canadian updates work on AT&T phones! I've tried it. Trust me. You don't want to deal with the hassle of fixing it.
Please remember to click/stick/lick/kick the "Thanks" button if you found this guide helpful!
How bout a 4th method for TWRP?
This should come in handy for some of the newer users
Well, the other TWRP method assumes that you already have a custom recovery installed to flash the ZIP from... If you've gotten that far already, I don't think you should need me to tell you how to flash a ZIP.
theres also GooManager from the market. its how I installed TWRP just download the app open it hit menu you'll see some options come up hit "install Open Recovery Script" it will ask if your sure hit ok and your done the whole process will take 30secs
Moved to General so new members can post questions
and stuck
FNM
Anyone know where to get stock sammy recovery img? Searched but didn't see it.
Edit: Got it.
dhostetter said:
Anyone know where to get stock sammy recovery img? Searched but didn't see it.
Edit: Got it.
Click to expand...
Click to collapse
Where'd you get it from? I'll add it to the OP.
There is a touch CWM for d2att available for manual installation.
http://www.clockworkmod.com/rommanager
tonymtl said:
There is a touch CWM for d2att available for manual installation.
http://www.clockworkmod.com/rommanager
Click to expand...
Click to collapse
There sure is! One of the benefits of manual installation is that you can find exactly what you want to use, and not rely on ROM Manager or other tools to make the decision for you!
Sent from my SAMSUNG-SGH-I747M
dstruct2k said:
Where'd you get it from? I'll add it to the OP.
Click to expand...
Click to collapse
+1. I am also looking for stock recovery...
Sent from my SAMSUNG-SGH-I747 using xda premium
I rooted my phone just after I bought it but was holding off on installing recovery due to how many hours I spend at work. Haven't had the time. I was also waiting on clear instructions on doing it manually, as it's easier for me since I'm not home often enough to use my PC and can't use the USB cord at work. Thank you SO much! Worked perfectly!
Edit: Spoke a little too soon. I'm seeing my backup dated 1970....
nekkidtruth said:
I rooted my phone just after I bought it but was holding off on installing recovery due to how many hours I spend at work. Haven't had the time. I was also waiting on clear instructions on doing it manually, as it's easier for me since I'm not home often enough to use my PC and can't use the USB cord at work. Thank you SO much! Worked perfectly!
Edit: Spoke a little too soon. I'm seeing my backup dated 1970....
Click to expand...
Click to collapse
That's a known issue with any recovery on the SGS3, it seems that the hardware clock cannot be accessed by the recovery no matter which recovery you use.
Did you happen to make a backup of your stock recovery? If so, I'd like to get a copy of it to add to the OP.
Nice HowTo, but the glaring omission is using the GooManager app to flash TWRP.
A lot of people are moving on from the old CWM to "something better".
zmore said:
Nice HowTo, but the glaring omission is using the GooManager app to flash TWRP.
A lot of people are moving on from the old CWM to "something better".
Click to expand...
Click to collapse
I could never get that to actually work in the past, so I guess I forgot about it. I just tested it now, and it worked fine, so I've updated the OP. Thanks!
dhostetter said:
Anyone know where to get stock sammy recovery img? Searched but didn't see it.
Edit: Got it.
Click to expand...
Click to collapse
See my Index for flash back to stock. There is a great vid tutorial.
PS dstruct2k I have added this thread to the INDEX. Nice work
Thanks, just flashed latest CWM Touch. External SD Card support rocks
For some after doing the manual install of cwm its not holding it as I enter recovery after I'm done it still shows old recovery. Trying to install cm10 I'm currently on kyanrom
Sent from my SGH-I747M using xda app-developers app
HAVOK83 said:
For some after doing the manual install of cwm its not holding it as I enter recovery after I'm done it still shows old recovery. Trying to install cm10 I'm currently on kyanrom
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Then you're skipping a step, or typing something incorrectly. Once DD is done its work, you should get a response saying "Copied 10MB OK" or something similar. If it says that, then the stock recovery no longer exists.
HAVOK83 said:
For some after doing the manual install of cwm its not holding it as I enter recovery after I'm done it still shows old recovery. Trying to install cm10 I'm currently on kyanrom
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Please visit this post and follow from step 11-15. Shows kind of messed up on the XDA app so view it on your desktop. Very detailed guide for those who are confused. Thank you.
http://forum.xda-developers.com/showthread.php?t=1912335
Sent from my T&K Blessed SGH-I747
I followed those same steps but from a different thread and it still wasn't upgrading my clockwork recovery and kept getting status 7 when trying to flash cm10. Now I installed touch version hoping I would be able to get cm10 installed but still getting status 7. Any help appreciated
Sent from my SGH-I747M using xda app-developers app
Hi,
I have ClockworkMod Recovery v5.8.0.2. on my Galaxy Nexus. I'm running on XenonHD, but now I want to flash the latest 4.2 rom of Xenon.
Is my recovery outdated and should I update?
If so how do I update a recovery?
According to the cwm recovery page, the latest version for the gnex is 6.0.1.5
I can't remember which version added support for 4.2 (older versions would recursively create the /0 folder...), so you probably want to update it.
To update the recovery, just follow the same steps you did for install.
Your old backups may no longer work properly, although I think there might be a couple solutions mentioned in these forums on how to keep them.
meisanerd said:
According to the cwm recovery page, the latest version for the gnex is 6.0.1.5
I can't remember which version added support for 4.2 (older versions would recursively create the /0 folder...), so you probably want to update it.
To update the recovery, just follow the same steps you did for install.
Your old backups may no longer work properly, although I think there might be a couple solutions mentioned in these forums on how to keep them.
Click to expand...
Click to collapse
Thanks for the reply. I used a one click for all method, so I am not sure how I should install a recovery.
I found this thread: http://forum.xda-developers.com/showthread.php?t=1757146 can I just flash this flashable zip with CWM?
I can't post in the development section that is why I am asking about this here.
Sorry, I do not know if you can just flash the zip over it, as I just did the "fastboot flash recovery cwm.img" method.
If your original method was just clicking on a .bat file, you might be able to replace the .img file that was included with it with the latest img file for cwm, as chances are the bat file just executes the command I listed above. If the script also installed XenonHD, though, I would probably avoid using it as it might overwrite your existing install.
https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en
There you go OP. Install that app, hit the "flash CWM" button, grant root permission (set to remember), when it finishes I would hit the "flash CWM" button again and have it run w/o asking for root permission. You should be on the new CWM, it will show the # for the version you are on. :good:
Okay I will try the Rom manager app.
Just so you know Rom Manager is the official app from Koush, the dev behind CWM.
WiredPirate said:
Just so you know Rom Manager is the official app from Koush, the dev behind CWM.
Click to expand...
Click to collapse
Ooh okay, I heard about the app before but I never used it.
If you search here on the forums I believe you will find the "touch" version of CWM, or you can purchase it within the Rom Manager app and get the updates. I purchased it and I prefer it to the old method of using the volume buttons.
I did read the "similar threads" and read them.
I am wondering If I wanted to replace TWRP with CWM what is the exact process. Also is there a way to have a dual recovery so you can choose which one you want to use?
electrojas said:
I did read the "similar threads" and read them.
I am wondering If I wanted to replace TWRP with CWM what is the exact process. Also is there a way to have a dual recovery so you can choose which one you want to use?
Click to expand...
Click to collapse
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635
Thank you
BCSC said:
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635
Click to expand...
Click to collapse
This is exactly the information that I have been wondering. Thanks for the quick reply and link. Peace.:good:
Keep in mind that backups are specific to the recovery that they are done with. If you backup with CWM you must restore with it also. If your latest is with CWM and then you funk your phone up, TWRP will not help you restore unless you can find a flashable CWM.
Another option?
BCSC said:
You can over write TWRP with CWM by flashing CWM with ROM Manager. Or Terminal Emulator. You can not use 2 at the same time because recovery resides in a specific memory slot that can only contain 1. There is nothing stopping you from quickly flashing back to whichever recovery you want though. These instructions will show you a way to switch back and forth at will. It works for both TWRP and CWM. You just need the appropriate recovery.img. http://forum.xda-developers.com/showthread.php?t=2170635
Click to expand...
Click to collapse
I keep flashing CWM with ROM Manager but TWRP still shows up on my Recovery, and i'm not confident enough to use the Terminal Emulator option. Is there another way to go?
Flash CWM from TWRP. Just make sure you find a version of CWM that is flashable.
Here is a link to the tar version of Philz that I use: http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
PauloScalon said:
I keep flashing CWM with ROM Manager but TWRP still shows up on my Recovery, and i'm not confident enough to use the Terminal Emulator option. Is there another way to go?
Click to expand...
Click to collapse
The terminal method is quite simple and a guarantee to work. You only have to type exactly what you see in the instruction. I understand you may be nervous about using codes to change the inner workings of the ROzm but believe me as long as you type it correctly its not possible for something to go wrong.