Related
Hi.
Have Boostmobile Epic that came unrooted.
Downloaded drivers and phone shows in device manager under com ports.
Tried 11 USB cables then saw a video from qbking and bought a blackberry to use its cable making it 12 cables, none work.
Tried 2 computers with Vista and Win 7 x64.
Epic won't communicate with either comp with debugging on or off.
As i said in topic, one click root won't work. Says Phone is not connected.
I also cannot sideload content onto SD card because it does not show in My Computer.
It has been flashed to boost so i assume it has communicated with a PC in the past.
What can i do to fix this?
Reboot pc and phone then try again. If that doesn't work then uninstall drivers from pc then install again. Reboot pc after install after reboot plug in epic then wait for it to finish installing drivers then reboot both again then use odin.
You can also connect the phone with usb debugging on, then go into device manager on the computer and look for "other" or samsung android in USB section. Click on that and select update drivers and let windows update search and install drivers...it takes awhile.
just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.
PHug said:
just did the uninstall drivers then reboot both thing.
Driver installation shows device ready to use as...
SAMSUNG USB Composite Device
SAMSUNG Mobile Modem #2
SAMSUNG Mobile Modem Diagnostic Serial Port (WDM) (COM5)
All ready to use.
But Still not showing in my computer for file transfer or working in usb debugging mode for root.
Click to expand...
Click to collapse
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.
kennyglass123 said:
Try the update driver choice in device manager. The CDC driver is missing. I think it loads 5 drivers if I remember correctly with USB on...yeah the mass storage driver is missing too. Let Windows update find them all.
Click to expand...
Click to collapse
Hi, thanks for help.
Just tried uninstalling everything and letting windows find drivers. Windows found a different driver package from S3 studio or something but I still get no mass storage or root.
I've read you can root and install roms without a computer Guess that will have to be my route.
As far as mass storage goes... It's annoying but I pulled the back off and put SD card directly into computer
You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?
jbadboy2007 said:
You are sliding down the pulldown on your epic screen and pushing mount sd card for mass storage right?
Click to expand...
Click to collapse
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.
PHug said:
Yeah, the robot pic turns from green to orange but it never actually connects to either computer.
Going to my brothers house soon to check his 2 computers, he says his Thunderbolt will only work on one.
Click to expand...
Click to collapse
Some computers are finicky and will only work on the USB port used to install the drivers. Odin only works on the left side of my laptop and mass storage works on the right...go figure!
The fact that the phone thinks it connects and the computer probably makes the connection noise shows there is still a driver problem. Did you reboot the computer and phone after the full driver installation?
Yes I restarted both several times while installing/uninstalling
Drivers... I have just accepted that I need to remove the card to sideload content.
On a side note, I am now afraid to root my phone and change the roms because I'm on boostmobile and will be unable to connect phone to a computer to fix if something goes wrong.
Sent from my SPH-D700 using Tapatalk
after you install drivers, reboot, then plug in your phone w debugging on, it should install a bunch of drivers, then take forever on modem, unplug and replug the usb from the phone really fast, this should trip it up into moving to the next device... there should be at least two or three more. If you have GB loaded for some reason the RNDIS drivers are wonky. Make sure you use a USB port on your motherboard, not on a PCI, not on a front port... the drivers are acting weird lately, like they changed em up a bit... idunno... but once you get a setup, dont mess with it! Hope somethin helps... Its almost guaranteed the drivers, unless the Boost is the issue, idunno...
ive had that same problem ever sense ive got the phone, what if you havent given up there is another way for you to connect to your computer. It is very simple and fast it is how i connect now and it works every time.
1. Have computer on and Phone off
2. Boot your phone into ClockworkMod 3.1.0.1 (Power/camera/volume down)(it must be this version of clockwork)
3. Go to mounts and storage
4. On the bottom of the menu you must click mount usb storage.
5. Plug your phone into the computer and your computer should recognize your phone now.
Also if your on Vista / Win7 you should run the command line (cmd) or the bat file to root with admin rights: Right click cmd or the run.bat and select run as administrator and that hould help.
Sent from an Epic with 4G
I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
tazfanatic said:
I don't think the drivers for samsung are 64 bit compatable. If you got the drivers from samsung it should state that.
Sent from my lean mean drunken machine useing XDA Premium and a 12 pack of Sam Lager
Click to expand...
Click to collapse
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.
kennyglass123 said:
The ones installed through Windows Update run fine on my 64 bit Windows 7 Laptop.
Click to expand...
Click to collapse
good to know.
I'm from the Evo 4G section of xda and just bought an Epic 4G from a friend to play around with. I've rooted and fully customized my Evo 4G and my uncle's Samsung Infuse. So I am not new to the rooting side of these phones. However, I just can't seem to get this to work no matter how hard I try.
Ok so I have done Google searches and sifted through the various "fixes" here on xda....I cannot, no matter what I do, get my epic 4g to be recognized on my Windows 7 64 bit.
I've downloaded and installed about 3 or 4 different USB driver files. I've gone through 2 different cables. I've uninstalled and even updated drivers via Windows. And I've installed and updated Kies. I bought the phone from a friend of mine who had done a full system restore before he gave it to me. So if there were any system issues they should be gone. When I plug in one of the cables the phone shows that the USB cable is connected and I have USB debugging on. But my computer shows "Uknown Device." Does anyone have any suggestions for me please?
I've included screenshots of what my computer shows me. Any help, or reference literature that I may have overlooked, that you guys can provide would be extremely helpful.
There's a few reasons this could be happening. You may want to try different USB ports on your computer or connecting through a USB hub. Also, make sure you're using the official Samsung drivers (you can search for them on XDA).
Otherwise, go to the dialer on the phone and punch in ##8778# and under USB make sure PDA is checked instead of modem. Hope that helps.
I too could never get win7x64 to work but had no problem on other pc running win7x86. I wasted hours trying. Uninstalled everything, removed all references in registry, used usbdevview, device manager, different usb ports, win update, and on and on and on. Gave up since I had other computer and it just worked 1st try. Please pm me if u find the solution. Would still like it to work on 64 bit. My thought is the 64 bit driver, but I hear others are working. :-O
Sent from my SPH-D700 using XDA App
BillyBob3 said:
I too could never get win7x64 to work but had no problem on other pc running win7x86. I wasted hours trying. Uninstalled everything, removed all references in registry, used usbdevview, device manager, different usb ports, win update, and on and on and on. Gave up since I had other computer and it just worked 1st try. Please pm me if u find the solution. Would still like it to work on 64 bit. My thought is the 64 bit driver, but I hear others are working. :-O
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Mine works fine on my 64bit Laptop. I had to update drivers once though since going to GB leak broke it. On my desktop it will only work if connected in the rear USB port.
Sent from my SPH-D700 using XDA App
I've used atleast 3 different computers with 64 bit windows 7, I never did anything special except for download the drivers from samsungs website...
I don't know what it is because I couldn't get the computer to recognize my phone on my uncle's laptop (which runs Vista 32). It kept giving me the same "Unknown Device" message when I went to look at the drivers.
Concordium said:
I don't know what it is because I couldn't get the computer to recognize my phone on my uncle's laptop (which runs Vista 32). It kept giving me the same "Unknown Device" message when I went to look at the drivers.
Click to expand...
Click to collapse
Where it says unknown device double click on that then go to update driver then browse to location of unzipped samsung drivers.
Sent from my SPH-D700 using xda premium
Welcome to the Epic 4g xda section! It just so happens I was looking for Windows 7 64-bit drivers earlier today.
Here's where I found them: http://forum.xda-developers.com/showthread.php?t=798067
Then scroll down to the section "2.3 – ROOTING" and you'll find the listed drivers there.
jdawg101 said:
Welcome to the Epic 4g xda section! It just so happens I was looking for Windows 7 64-bit drivers earlier today.
Here's where I found them: http://forum.xda-developers.com/showthread.php?t=798067
Then scroll down to the section "2.3 – ROOTING" and you'll find the listed drivers there.
Click to expand...
Click to collapse
That post and those drivers are old...
Go here and get the drivers from Samsung:
http://www.samsung.com/us/support/downloads/SPH-D700ZKASPR
AFAIK, that package should install the correct drivers for the OS.
GL
=]
I install 32 and 64 bit drivers for the i9000
Sent from my SPH-D700 using Tapatalk
I have literally the same problem, phone was reconized and connected fine when i was running xp 32 bit, installed windows 7 64 bit and nothing i do will work. Was your problem ever resolved?
All i can say is try extracting the drivers thru 7zip
then extract the files it gives you
then u should see like a folder and then copy and paste the
folder in the c: program files
and then go back to device manager and then actually manaually search for
drivers and that should work cuz it worked for me im using Windows 8
unfortunately that is one of the exact ways I tried to do it, thanks for the input tho. Just incase I over looked something searching for the driver manually, what sub category should my phone be under in device manager? thx
For those having trouble getting the drivers installed in Win7(x64/x86).
A workaround could be to use WUBI (Ubuntu's windows based installer that adds an option to boot to Ubuntu, while allowing it [Ubuntu] to be uninstalled from windows like a "normal" program).
Install WUBI, boot to Ubuntu, problem solved!
If the point of installing the drivers it to get Odin working...
The WUBI workaround would still work, you would just replace Odin with Heimdall (which is 100x better/more stable than Odin anyway).
I realise this is a lot to do for resolving a driver install problem, but... Heimdall pwns Odin anyway.
GL
;]
apugslovesxda said:
unfortunately that is one of the exact ways I tried to do it, thanks for the input tho. Just incase I over looked something searching for the driver manually, what sub category should my phone be under in device manager? thx
Click to expand...
Click to collapse
It will show up under USB.
Sent from my SAMSUNG-SGH-I717 using xda premium
kennyglass123 said:
It will show up under USB.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
and if your in download mode when you hook your phone up
it will show up under modem it wil not show until you connect your phone
Ok I had to do the following inorder for it to work on my windows 7 x64 bit
I download the samsung epic 4g driver samsung_mobile_driver_v1.3.800.0.msi
I then used 7zip to extract the file
I then used the msi file and installed it
I then used 7 zip and extracted the samsung_mobile_driver_v1.3.800.0.msi file to a directory
I then DISABLE ALL INTERNET ACCESS ON THE LAPTOP BY TURNING OFF WIFI AND OR PULLING THE LAN CABLE OUT THE PC.
I then plug the phone into the pc usb slot
let the pc find the drivers
if it does not find them point to the extracted directory you did above and it will be good.
now do ##8778# and place the bottom into pda and if it cant find drivers point it to the extracted directory.
now turn phone off and go into download mode 1 key and power button and let windows find the drivers
jmuru said:
There's a few reasons this could be happening. You may want to try different USB ports on your computer or connecting through a USB hub. Also, make sure you're using the official Samsung drivers (you can search for them on XDA).
Otherwise, go to the dialer on the phone and punch in ##8778# and under USB make sure PDA is checked instead of modem. Hope that helps.
Click to expand...
Click to collapse
Oh... my... god. I spent hours today trying to figure out how to get this phone I picked up to show me its sd card as a drive. Everyone on the internet seemed to be saying it was the lack of the right drivers, though they all disagreed on what the right drivers were. I tried so many different drivers, no luck.
That above, that I quoted: all it took. Why would it possibly be misconfigured out of the box in such a weird, impossible-to-locate way? Jeez.
(Anyway, I know I'm bumping a super old thread with this first post, but I felt compelled not just to thank this person for restoring my sanity, but also to bump up this thread's relevance for future googlers going as crazy as I was going.)
So I'm currently running JB from Codename Android and I can't get it mount into USB on my computer. I'm running Windows Vista and this is what happens, I connect and it detects it. When I open the folder I see my stuff but I can't copy anything. Then I go into a folder and it stays loading all the items but nothing ever loads. Then it says the device attached malfunctioned. I've tried other ROMs but they do the same. Any ideas?
Hopefully its not an hardware issue. Have tried a different USB cable? In addition it also could be your drivers. I know the WugFresh toolkit which I use has a decent driver install option which ensures the right stuff is on your PC.
I can copy things onto my phone I just can't take anything off. I've tried quite a few different USB cords. Idk. Maybe if I just start over, idk. Ugh! It makes me a little upset.
Try it on another pc. The word "windows vista" makes me scream so loud!!
Please try it on another pc
Sent from my Galaxy Nexus using Tapatalk 2
Well since I have two hard drives, I have Windows Vista on one and Windows 7 on the other, and both don't load. I don't have another PC. :-/ Sucks.
I have a question, does the type of kernel matter? I have Franco's nightly #248 and now that I've thought of it, I usually install that on every ROM. Has anyone else had this problem? Does setting the read ahead file speed to 4098 make a difference?
thegtfusion said:
Try it on another pc. The word "windows vista" makes me scream so loud!!
Please try it on another pc
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I am not sure is relevant, but are you running as administrator in Windows?
Sent from my Galaxy Nexus using xda app-developers app
Prince_Basil said:
So I'm currently running JB from Codename Android and I can't get it mount into USB on my computer. I'm running Windows Vista and this is what happens, I connect and it detects it. When I open the folder I see my stuff but I can't copy anything. Then I go into a folder and it stays loading all the items but nothing ever loads. Then it says the device attached malfunctioned. I've tried other ROMs but they do the same. Any ideas?
Click to expand...
Click to collapse
It has nothing to do with ROMs or kernels. It's MTP. MTP sucks. Try copying stuff using adb pull/push or by accessing a shared folder on your computer via wifi.
I don't have WiFi since its a desktop and I don't really have internet. Haha. Its all good. I guess I'll figure it out. So I've been reading about plugging in a USB stick to the phone, does anyone know where i can get one? I have an 8 GB USB flash drive so I just kinda wanna know.
I posted another thread with problems with odin and my ace 2. I uninstalled all the samsung driver's, I then reinstalled the samsung driver's and i get all these missing bluetooth driver's and 2 android driver's on my device manager. I can assume this is why odin is not working can anyone help please ? I have attached an image of my device manager. Also the samsung ADB interface driver only pops up when my device is plugged into my computer.
Thanks
Sam
samwage123 said:
I posted another thread with problems with odin and my ace 2. I uninstalled all the samsung driver's, I then reinstalled the samsung driver's and i get all these missing bluetooth driver's and 2 android driver's on my device manager. I can assume this is why odin is not working can anyone help please ? I have attached an image of my device manager. Also the samsung ADB interface driver only pops up when my device is plugged into my computer.
Thanks
Sam
Click to expand...
Click to collapse
I don't know about the bluetooth drivers but indeed Android adb driver should work. So here is what I suggest.
Go to the Samsung Android Phone tab, and uninstall these 2 drivers in there, restart laptop, then go and download the ace 2 drivers from here and see if it works, ah btw let the phone connected during the whole process.
Thanks for the advice i followed your advice, uninstalled both the samsung and ADB then restarted my computer. I then reinstalled the drivers you provided with my device plugged in, while they were installing. I got the bluetooth drivers popup again, Also theres a new thing under my portable devices tab i will post more screenshots this is really boggling me :/
Also this popped up when installing the drivers to do with the bluetooth.....
looks like MTP won't work either eh? Well let's see if it's the phone or the pc
Firstly follow those instuctions to do some troubleshooting.
1) Go to http://www.microsoft.com/en-us/downl....aspx?id=19153
3) Download the file
6) Run it
7) Follow the instuctions (NextNextNextNext)
That's it, now the MTP devices should work correctly.*
(ALSO Try de-selecting usb debugging)
If this won't work then I guess it's a problem with the phone.I read somewhere in a thread that some dude with the same problem on a samsung phone did factory wipe, wiped dalvik, and installed another ROM, then the usb drivers problem got fixed.
Good luck.
EDIT: Also check this site here it seems to have solution regarding the bluetooth peripheral thing.
none of those links work It has also stopped coming up as mtp it now just says GT-I8160. Also i noticed when i start up my computer it fails to start until i unplug it and plug it in again (attached pictures)
Also there is no android adb anymore its just the samsung one.... is this right? i appreciate your help
I am also using a 64bit version of windows 7 if that makes any difference.
Have you tried connecting the phone to some other pc just to know which one is the problem?
I've ran outta ideas...well the problem seems to be with the device itself and if not then it's probably the usb port,maybe insert to another port or try your luck on google, search for something like "windows failed to recognize android phone"or smth similar. I'll do some more research and try to help y'out tomorrow
Sent from my GT-I8160 using xda app-developers app
I tried disabling usb debugging also i tried the drivers on my netbook. I am having really strange problems on there with odin i plug it in and odin wont pick it up and as soon as i unplug it it says added then removed very weird :/ thats only when the phone is in download mode....
Im thinking its either the cable or the phone. Im not sure though..
Remove all Samsung related drivers.
Restart pc
Use cccleaner to clean the registry
Reboot pc
Use the drivers that i have provided in the s advance forum in my all in one guide. Install the drivers without connecting the phone.
After the drivers are installed, turn off internet connection and then connect the phone.
Sent from my GT-I9070 using xda premium
Thanks for the new idea shaaan I have succesfully followed steps 1 and 2. But I am struggling to find your all in one guide would one be kind to link me ? I did a forum search with no luck. Also I am using a galaxy GT-I8160 would using the s drivers matter? and thanks for the help mojito0 I would like to think it isn't the cable or phone, as I have literaly owned them for 8 days (just over a week). I can always see if i can borrow another cable of my friend today though
edit: I found your all in one guide I am now going to attempt what you said
After removing all the samsung related drivers and restarting I get all these devices come up? The device is not plugged in either.
I dont know if this helps atall, but I finished doing what you said ignoring the drivers.... Then went to flash using odin, Put the phone into download mode and noticed that after a couple of seconds of being stuck on setup connection. It then says the GT-I8160 cannot start, Also the mtp and adb android driver is still displaying that yellow explanation mark :/ I am a newbie to android here and dont know the difference betwene the samsung adb and the android one as listed do they both need to be working?
Remove all the displayed devices from other devices, also remove that Samsung adb thingy and also there will be one Samsung related device in the usb section! Remove them all and then follow my steps.
As for your driver query, the drivers are universal for a specific range of devices. The driver version 2.0+ should work for all devices which were released in 2012
Sent from my GT-I9070 using xda premium
Hello everyone, been a while since I have been on this site.
I am in a dilemma which I hope you guys can help me with.
I have a samsung galaxy nexus, and I just wiped the phone. But there is no recovery, so I have no OS atm.I have tried the Android Toolkit, however, everytime I try using it I get problems. It says , " waiting for adb mode" . I downloaded SDK and have runned the adb.exe file, but a command prompt pops up, and a bunch of stuff pops up and scrolls down, and then it closes. It does nothing.
I have read that my drivers for ADB are not installed properly or whatever. So I tried uninstalling them from " device manager" and I tried reinstalling them. That didnt work. I tried uninstalling again and than downloaded a samsung galaxy nexus usb adb driver, which also did not work.
I just want to be able to place a ROM on my phone from the computer. If I can get that far, I can install it from recovery mode. But I cant even get it fully detected on my computer. Whenever I plug in the USB, it detects it, but drivers fail.
Also, in device manager, the universal serial bus controller, SM bus controller, and ethernet controller all have a yellow triangle over them. They always fail to install..
I have tried updating them from the device manager. But that has failed aswell..
Please someone help me. I am at a dead end and unsure what to do.
-Andrew
Try a different cable or different drivers. And please learn to use adb yourself and stop using toolkits.
Sent from my Galaxy Nexus using XDA Premium HD app
Can you enter in bootloader?
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
I can go into bootloader and recovery mode. I also tried a different computer and usb. It looks like its a bit better now because it actually says Galaxy nexus, instead of android device. However, I still cant go into ADB mode.
Everywhere I go, people say you need to enable debugging....but I dont have an OS. I am stuck in recovery or fast bootmode.
In the meanwhile, I tried installing zip file via sideload using Android Toolkit by skipsoft.( option 16) ....it looked like it was going to actually work...but it didnt. It says i dont have a recovery for TWRP or any of the other options.
You need to install fastboot drivers, and download 4.3 (or any you like) Google factory image for maguro. Flash that image, and install prefered custom recovery
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
I downloaded the fastboot usb drivers, however, I am not sure what to do with them.
Here's a pic of the files. I also download the adb files, and installed them, even though it said I had existing files.
andrewb71 said:
I downloaded the fastboot usb drivers, however, I am not sure what to do with them.
Here's a pic of the files. I also download the adb files, and installed them, even though it said I had existing files.
Click to expand...
Click to collapse
Enter bootloader on phone and connect it to PC. Phone probably wont be recognized. After that go to Device manager and find your phone ( as I remember it will say Android 1.0 or something similar), right click on it and press Update driver. In new dialog it will ask you whether you want to automaticly find drivers or manually. Press manually and select that usb_driver folder.
Sent from my Galaxy Nexus using XDA Premium 4 mobile app