Hello, found a few scratches on my Xperia Arc screen and got very disappointed, I thought it had scratch resistant screen, later I took a close look to the screen and found out that it had one more screen layer, could anyone tell me if it can be removed or not, because when I asked SE support team, the operator told me that it can be removed, I just wont a suggestion, help guys.
I would not touch that layer it is part of the capacitive sensor on the screen if I'm not mistaken
yeah, I'm afraid of that too, but support team convinced me in opposite
Yes, you can remove it without problems. I did it in December without problems so far.
Sent from my iPad 2 using Tapatalk
how did you remove it? any suggestions to peel it off? It's a bit hard to do that ( with nails )
With my nails
It takes a while to pick up a corner, but once you got a corner picked up it's easy.
Sent from my iPad 2 using Tapatalk
SL_Don said:
I would not touch that layer it is part of the capacitive sensor on the screen if I'm not mistaken
Click to expand...
Click to collapse
Part of capacitive sensor ?? Lol
Anyways..it's just a screen protector..if got scratched,replace it with a new one..
And in this case,i would suggest you to seek some professional help as you might end up making new scratches in order to remove the protector.It's a tough job and needs a lot of love and care d(^_^)
Thank you all, I did it, it really was a screen protector, if found layer like this on your arc , you should peel it off, as a result you get Better colors, touchscreen enhancement and sharper image.
I dont think that we should remove the screen guard. SE provides two screen guards with the handset. One comes already pasted on ur handset and other comes in the box. we need not remove it as it keeps the main screen safe from scratches..
I really agree with your, but that screen protector makes touchpad less sensitive and colors are less vivid, so I prefer being extra careful with my phone then looking at Less Attractive screen
Last time I checked the screen protector I have on doesn't change the quality, clearness or the color of the display. Just saying.
Protect your screen with one. Most of them now a good and leave your screen feeling normal.
i know its an old question but anyway i have one question.how hard is it to peel of the screen protector? im trying it right now and im afraid of braking something, should i force it off or what?
It is glued there so you may have to use some force to peel it off.
Sent from LT18i with custom firmware by myself.
I accidentally stepped on my Xperia PLAY's screen with my foot and there was quite a lot of pressure applied.
I was wondering would this have damaged the screen in any way ? Thing is I can't see anything that looks damaged like colour loss or something.
Sent from my R800i using xda app-developers app
Well if you can't see any damage on a screen, I guess it's not damaged...
I'd have to agree with leots. As far as the glass goes, I was walking up some stairs once, and the phone gently brushed along the metal railing. I now have a very deep scratch in the screen. Just keep that in mind as far as durability. I do say the Corning Glass would have been a nice addition.
Hi
just need to know whether Arc S has a built in screen guard from the company or not !
cuz from the beginning m not using any protection as i see an edge around the corners that reflects the dual surface, which i believe is the original protector !
plz help as i want to put a guard now as i see sme minor scratches which are alarming !
awaiting reply
Yep the phone comes with 'mineral-resistant screen'. However it is best to put another screen protector on it just to be on the safe side I have a mirrored one
thnx ! but if that mineral protector is somehow peeled off ! is it bad ? cuz i did that deliberately !
stab2 said:
thnx ! but if that mineral protector is somehow peeled off ! is it bad ? cuz i did that deliberately !
Click to expand...
Click to collapse
Really? At least on my phone I even did not try because it looks like almost as its fixed there and cant be peeled.
Mine as well didn't last long.. In just couple of days air bubbles started to breed between the screen and the protector! I had to take it off and apply a new one (you can buy in mobile shops)
A good tip is to make sure there's absolutely no dust on the screen before you start applying the protector
Stock protector is applied so precisely and is so sticky that it's almost impossible to "accidentally" remove it. So I don't know how did you manage to do that, really.
Also, can someone explain to me how is it possible for bubbles to start appearing under screen protector all by themselves, for no reason??? Some new laws of physics maybe, or...?
Hi guys,
Little sad story here.
After not even 10 days of life my Galaxy Note 2 fell from my bedside table face down onto tiled floor and smashed the front glass! (my cat did that, I know it's was on purpose, that's why I now have a cat fur bedside mat).
I'm ordering a new front screen glass as the display and everything still works fine.
Only thing, which is weird, running a system test it shows the proximity sensor stuck to far. I did notice that during calls the screen would not switch off. Before the crash the proximity sensor worked fine.
What do you think the reason might be? I am attaching a picture of the phone. Do you guys think the cracks on top of the two sensors near the front camera might "confuse" the proximity sensor?
Thanks for any idea you may have...
Also, I will update you on the front screen replacement and its results.. Fingers crossed...
Cheers!
Sent from my GT-N7100 using xda app-developers app
My cat always tries to bust my stuff to.....nooooo kittty thats a bad kitty
First off, feel very sad for you pal.
I'm quite sure that the proximity sensor is damaged from the fall, so you might have to ask your SC to check it once when you'll go to replace the front glass.
Besides, another shatter story, shows this device's build quality is sub par. No device should break, let alone shatter, from a fall like that, one or two dents would be more than enough. What was the Gorilla doing when it hit the surface anyway?
Swyped from my GT-N7100
looking at the picture hurts my heart!
but yeah like jujuburi said, the fall might have dislodged or damaged the proximity sensor.It could also be the crack over the sensor, because the glass is no longer aligned, it could possibly be confusing the device but rather unlikely.
Its obvious that the crack in front of the proximity sensor is messing with it. Under direct sunlight you should be able to look at the proximity sensor and see if its not aligned otherwise its just the crack.
Sent from the Rabbit Hole
It will be the crack for sure... It will affect the light getting to the sensor
Sent from my Samsung Note II.
Wow sorry for your somewhat loss! I will cry if this happens to mine, best I take insurance I guess :fingers-crossed:
bushako said:
Its obvious that the crack in front of the proximity sensor is messing with it. Under direct sunlight you should be able to look at the proximity sensor and see if its not aligned otherwise its just the crack.
Sent from the Rabbit Hole
Click to expand...
Click to collapse
Thanks for the reply,
Could you tell me which one is the proximity sensor?
Is it the one nearer to the speaker or the one nearer to the front facing camera?
Thanks!
Sent from my GT-N7100 using xda app-developers app
guido.minciotti said:
Thanks for the reply,
Could you tell me which one is the proximity sensor?
Is it the one nearer to the speaker or the one nearer to the front facing camera?
Thanks!
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Second left from the front facing camera .
R: Crash, smash!!
Thank you all for your input.
I have noticed that the proximity sensor still works, as it is sufficient to put the phone near a really bright light to get the screen to turn on again. It's just a bit fidgety to do that and end the conversations...
Still waiting for the new glass to arrive from Hong Kong, we'll see what happens next...
Regarding the fall, the phone was connected to the charger and was facing down on the bedside table as the LED stays on after finishing charging and that morning it was annoying me enough...
The bedside table is about 60 to 70cm tall and the floor is made of old terracotta tiles, very hard and uneven: I guess one of the tiles corners must have contributed to the damage.
I agree that the Gorilla glass should be a bit more resistant but just a few days before the smash, a friend dropped it while he grabbed it and it literally flew across the room and hit a hard floor and it was perfectly fine afterwards, not even a scratch!
Mystery...
Will update you all when u get the new glass.
Anyone has some good tips about how to replace it? I have seen some YouTube videos about it and, although time consuming, it seems possible...
Only thing I don't understand clearly, will the screen glue back on afterwards? Or is there anything I need to know about it?
Thanks!
G
Sent from my GT-N7100 using xda app-developers app
Proximity sensor might have got damaged due to drop
Sent from my GT-N7100 using xda app-developers app
s10sdeville said:
My cat always tries to bust my stuff to.....nooooo kittty thats a bad kitty
Click to expand...
Click to collapse
I get a phone on the floor and then a tail in my face to wake me up at 530 for food
Sent from my GT-I9300 using Tapatalk 2
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS Youtube video. AOK now. afterwards, I tried to pry apart the digitizer glass. In my Note II it is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer on my version of the Note II (I317)
Mine cost $USD 250
Your crack is right over the sensor, so I would expect the sensor itself is fine.
The digitizer glass is the Achilles heel of the device. The rest of it seems normally robust.
I think the glass is so big that it can crack from a twist as well as a drop.
And the glass is very scratch resistant, but very thin and brittle.
rickyvee said:
Mine dropped from two feet and hairline cracked across the whole screen. I bought the full assembly LCD/digitizer. Did the repair per LE55ONS Youtube video. AOK now. afterwards, I tried to pry apart the digitizer glass. In my Note II it is bonded with transparent gum covering the entire LCD. No way to replace only the digitizer on my version of the Note II (I317)
Mine cost $USD 250
Your crack is right over the sensor, so I would expect the sensor itself is fine.
The digitizer glass is the Achilles heel of the device. The rest of it seems normally robust.
I think the glass is so big that it can crack from a twist as well as a drop.
And the glass is very scratch resistant, but very thin and brittle.
Click to expand...
Click to collapse
Where did u fix urs? Did u call Samsung? Mine is shattered too, well in my case besides the phone i broke my face too got 6 stitches. Long story though lol.... But where did u get it fixed?
R: Crash, smash!!
pradyots said:
Where did u fix urs? Did u call Samsung? Mine is shattered too, well in my case besides the phone i broke my face too got 6 stitches. Long story though lol.... But where did u get it fixed?
Click to expand...
Click to collapse
Sorry to hear that...
I got it from eBay from China for the equivalent of about 40USD...
Here's a link: http://www.ebay.com/itm/New-Screen-...182&pid=100011&prg=1095&rk=1&sd=181060192621&
managed to replace the glass and working well now. Only problem is that in the process of detaching the broken glass I messed up the adhesive around the back and menu buttons so I need to get new one too. The new screen sits raised because of the extra thickness of the messed adhesive so touch responsiveness is not great but will be fixed as soon as the new adhesive arrives.
Also, here's how it looks after the big job..
Sent from my GT-N7100 using xda app-developers app
Well, hey man, kudos to you...
First thing I do when I get a touchscreen device is place a screen protector on it; and I regard that as a pretty major hassle as far as annoying hassles go. Yet you seem to have done a near flawless job with something as crucial as replacing the screen itself; I'm impressed. Hope you get that last little fixed as well, mate.
(On a side note, even with the screen protector I managed to screw up and there's a tiny air bubble just between the home button and the screen itself... So it's invisible when the phone's in use but just annoying enough to notice when the screen is off and the contrast between the black screen and the grey bubble is more obvious).
i really sorry to hear that. hope you can manage your behavior to a better one.
guido.minciotti said:
Hi guys,
Only thing, which is weird, running a system test it shows the proximity sensor stuck to far. I did notice that during calls the screen would not switch off. Before the crash the proximity sensor worked fine.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Or simply your proximity connector is loose inside your phone after the cat crash. If you are going to replace the screen yourself, make sure you check all the connectors inside your phone.
From my own opinion, the sensor not damaged but just the crack just across the sensor, just change the glass and our will be fixed, but as what i know, it's not a easy job to change the glass, as it glued together with the display, hope you will manage to change the glass if success, please share us your experience here
Warmest Greeting From Batam - Indonesia
jujuburi said:
. What was the Gorilla doing when it hit the surface anyway?
Swyped from my GT-N7100
Click to expand...
Click to collapse
Gorilla Glass isn't shatter or crack resistant, it's designed to be scratch resistant. It's hardness actually makes it more prone to cracking.
I put screen protectors on any phone I own. I ordered the ZL but I am afraid that I will wreck the display taking off Sony's installed screen protector. Has anyone had any problems removing this or damaged their display? Any tips for easy removal?
giper54 said:
I put screen protectors on any phone I own. I ordered the ZL but I am afraid that I will wreck the display taking off Sony's installed screen protector. Has anyone had any problems removing this or damaged their display? Any tips for easy removal?
Click to expand...
Click to collapse
If u do a little bit reading around u will see
Sent from my C6506 using xda app-developers app
I saw a you tube video but it was by a cell phone reviewer who has more experience than the average person. I am looking for feed back from XDA users too
Hi.
I did it with a needle. Peel the first edge of was very hard, but if there is a little bubble, you can grab the plastic and pull. For me there is no damage at all.
Marco