Develop Bugs

Broken glass

Hey guys, am i the only one? Phone did not fall or something else, it is only one week since i bought it.

It's hard to tell from the picture, but are you sure it isn't just a scratch on the screen protector?

No, it isn't just a scrtch. Line became longer too.

Maybe you walked against something while your phone was in your pocket?
Sent from my LT15i using Tapatalk

I would't post this if somethig like that happened.

Try to remove the original SE screen protector and see if the scratch/crack glass is on the display as well.
If it is, I would strongly suggest to take it to the nearest warranty repair shop.

It is scratched screen protector.

Yeah and the scratch went 2 cm longer itself

my arc has colorbubbles :S
in some points no more color
and over the Display at the display sensor its a bit broken
do you think i can change it by warranty ?

My Arc has fallen on the road 2 times & in my room 3 times.. Not a single scratch on screen.. Just a little scratch in the cornor where it's HDMI-thing...

Anyone know how to replace just the glass? Mine broke from dropping it face first on the ground

LanEvoVII said:
Anyone know how to replace just the glass? Mine broke from dropping it face first on the ground
Click to expand...
Click to collapse
don't know if it is in there but check this thread : http://forum.xda-developers.com/showthread.php?t=1123609

better than die after update, at least know you are responsible. )

How fragile is the Xperia Play

Is it safe to use it without a case (in case of a drop from like belt height), have you has drops like this and no signs of damage, or you have broken the screen or damaged something from less than that height.
And what about the trident case will it protect good from drops from belt height?
thanks

0mega007 said:
Is it safe to use it without a case (in case of a drop from like belt height), have you has drops like this and no signs of damage, or you have broken the screen or damaged something from less than that height.
And what about the trident case will it protect good from drops from belt height?
thanks
Click to expand...
Click to collapse
Screen is scratch proof basically, I dropped mine 3 times already at waist level still working fine and im not using any case protector as there is no available stuff like that here on my country yet. I advice you use I-shield for your phone.

I've dropped my play from a bit higher than belt height. The battery case popped off and the battery fell out, but once I snapped it back together, it's like it never fell

I have found that the R800x has been no more fragile than any other phone. I had one of those silicone covers on mine for a while but I had to take it off to use the docking station. So after a while I quit using it, and I haven't had any problems. YMMV.

I dropped mine and it fell face down and it hit the screen. It hit the corner of my desk where the those sharp corners are.
Still the screen works fine!
Sent from my R800i using XDA

Wow thanks, i didn't expect it to be so resistant, especially with a big glass screen.

On the other hand, the white plastic is not so fragile.
On my first drop, it hit the ground on the bottom right corner (the Search button area), and a small piece of the white plastic fell off.

vemoxy said:
On the other hand, the white plastic is not so fragile.
On my first drop, it hit the ground on the bottom right corner (the Search button area), and a small piece of the white plastic fell off.
Click to expand...
Click to collapse
What white plastic? The part that the battery back locks in to?
And I believe your choice of words should be "the white plastic is very fragile," indicating that it breaks easily.

It's not that good, I dropped mine on concrete and the digitizer broke straight away, LCD was fine though, before that i also dropped it on the bus and they have that special gritted rubber floor and it scratched the case and the bottons on the back (L1 and R1)
Guess i just have bad luck

ff7fan4eva said:
It's not that good, I dropped mine on concrete and the digitizer broke straight away, LCD was fine though, before that i also dropped it on the bus and they have that special gritted rubber floor and it scratched the case and the bottons on the back (L1 and R1)
Guess i just have bad luck
Click to expand...
Click to collapse
I'm a noob so have to ask this. What is the difference between the screen digitizer breaking and the LCD not ?
So you could see everything on screen but the touch screen wasn't working ?

sufy1000 said:
I'm a noob so have to ask this. What is the difference between the screen digitizer breaking and the LCD not ?
So you could see everything on screen but the touch screen wasn't working ?
Click to expand...
Click to collapse
Well digitizer registers screen touches and lcd displays everything, the digitizer is made from glass so it shatters, in my case it shattered but still registered touches

Dropped from belt level, Just some scratches on one corner, otherwise no damage.

I drop mine several times a week. Never from above 2 or 3 feet, and on carpet, but it's like I never did.
I also regularly wake up and find I'm lying on it.
The most I've dropped previous phones is once or twice (the whole time I've had them), if ever.
I don't know why I drop this phone all the time. Every time I do I think, "That's it, that's the one that ****s it up". Not yet though...
It's a tough phone.
Sent from my R800i using XDA

i droped mine on stairs ... digitizer fully broken, but still recgnoized the touch commands (good work se )
I buyed a new one at Ebay from HongKong for only 20€, open the play, droped out the old and insert the new digitizer and now i'm happy with this great phone again

It won't be as durable as keyboardless phones, I find the Samsung Galaxy phones to be much more durable with Gorilla glass. I can press against the screen to distort the liquid crystal. I have dirt under the screen also, which never happens with the Samsung.
I think all slide out phones require extra care so I will definitely get a case for it, especially the plastic seems easy to scratch.

Well my friend dropped it on the screen at sitting level. It worked fine. I threw it out of my hand once and it fell flat on the screen and it slid down the car ramp on the sidewalks. It survived with only one tiny scrape on the corner, close to the screen. Ever since I took my case off two weeks ago I've been dropping my phone many times. My friend knocked my phone straight out of my hand yesterday and I had chance to catch it. I got lucky.anyway tthis week has been the worst week for my phone because it has been dropped more than any electronic I ever had in aa year!!!
Sent from my R800x using XDA

In my opinion it's a pretty ****ty build quality. Yeah the screen does survive falls from waist height but you should be expecting that from any phone. The hard buttons on the front are quite badly scratched on mine just from normal use. Also I have some scrapes on the corners from the odd drop. And the game pad is scratched I think from sliding the screen up and down so I'm not impressed. I also hate how wobbly the screen is.
Sent from my R800i using XDA

MilkyJoePD said:
I also regularly wake up and find I'm lying on it.
Click to expand...
Click to collapse
LOL, that happens to me too! Good thing is that when you do, the screen becomes smooooth! Sadly it heats up the phone and the digitizer acts up crazy for at least 10 minutes. And yes, it's a tough phone, true that.
Sent from the best gaming android smartphone in the world with the best forum android app in the world

DanielEGVi said:
LOL, that happens to me too! Good thing is that when you do, the screen becomes smooooth! Sadly it heats up the phone and the digitizer acts up crazy for at least 10 minutes. And yes, it's a tough phone, true that.
Sent from the best gaming android smartphone in the world with the best forum android app in the world
Click to expand...
Click to collapse
I love my Xperia PLAY !

-josh- said:
In my opinion it's a pretty ****ty build quality. Yeah the screen does survive falls from waist height but you should be expecting that from any phone. The hard buttons on the front are quite badly scratched on mine just from normal use. Also I have some scrapes on the corners from the odd drop. And the game pad is scratched I think from sliding the screen up and down so I'm not impressed. I also hate how wobbly the screen is.
Sent from my R800i using XDA
Click to expand...
Click to collapse
Yes the gamepad on mine is pretty scratched and my screen is wobbly because I threw my phone in rage with the gamepad slid out.
Sent from my R800x using XDA

Crack in sgs2 benzel !!

Guys
I observed that there is a crack in the benzel of my sgs2. Benzel i mean The plastic lining that wraps around the front glass.
The crack is near the volume buttons.
How easy it is to replace this plastic strip ? Is it risky ?
Sent from my GT-I9100 using Tapatalk

Pretty sure you mean bezel, not benzel.
You would probably have to replace the entire housing which is quite risky to do in my opinion. If you don't know what you are doing you could short the board or break something.

Happened to me too.
Is it really so bad that you need to replace it?

Happend to me too. Seems like that part is very fragile.
I think the only way you can replace it is replacing the whole screen and touch panel.
After that one little crack and that mysterious burn mark right next to it (damn alcohol ) i finally decided to buy a case

TheSniperFan said:
Happened to me too.
Is it really so bad that you need to replace it?
Click to expand...
Click to collapse
Its not so bad. But there is an another minor crack on the exactly other side of the benzel where power button is present !
Is it because of overheat ? I use my phone while charging and battery temps are at 46 celcius when I do that.
I never dropped my phone.
If I go for a new benzel then will I have to pay for new screen too ? Is the benzel glued to the screen ?
Sent from my GT-I9100 using Tapatalk

DaPhinc said:
Happend to me too. Seems like that part is very fragile.
I think the only way you can replace it is replacing the whole screen and touch panel.
After that one little crack and that mysterious burn mark right next to it (damn alcohol ) i finally decided to buy a case
Click to expand...
Click to collapse
Buying a case is not an option for me. I nvr dropped my phone. I use it very carefully , I love my sgs2.
Why would I have to replace screen also ?
Sent from my GT-I9100 using Tapatalk

You can probably have it replaced at an official Samsung repair center. I'm pretty sure they carry one or two sets -- or can order one for you -- but it'll probably set you back a little.

sachinaik said:
Why would I have to replace screen also ?
Click to expand...
Click to collapse
I am not sure about this. But looking at the screen replacement tutorial (http://forum.xda-developers.com/showthread.php?t=1253969) it seems like screen+touchpanel+bezel is a single part. I guess it is somehow glued together. But again, that is just a guess.

just put a little glue in the crack

went to samsung service center.
They said they will replace the Glass panel, Pled screen and benzel.
Oh what the hell, I'll get a new Oled screen. Will go for SGS4 directly
Sent from my GT-I9100 using Tapatalk

I guess it is not covered by warranty, is it? How much do they charge you for replacing it?

DaPhinc said:
I guess it is not covered by warranty, is it? How much do they charge you for replacing it?
Click to expand...
Click to collapse
Approximate 6000Rs I.e, 120$
Sent from my GT-I9100 using Tapatalk

yeah I noticed a crack on my bezel above the volume button. You can kind of see it on the enclosed picture.

I've got a crack in almost exactly the same place as the above pic, slightly closer to the top of the volume button.
Mine has been in an official flip case since day one and has never been dropped. I only noticed the crack when I looked after reading this thread (just like the plastic cover over the home button thread!).
I wouldn't have noticed the crack because of the case. So, is this a design fault? Is it heat or flex that is causing the crack?

The benzel is the most fragile part I think.
I must be because of heat. As the processor, gpu and antenna are near camera module. The top portion gets a lot hotter when accessing 3G.
On top of that if any pressure you put on it going to worsen it. Putting it in a tight jeans and then when u try to remove it out of pocket, u tend to grab the benzel a lot.
All in all, I would go for a metal/polycorbonate benzel in my next phone. That disqualifies SGS3.
Obviously I dont want to pay a hell lot of amount just to get a thin plastic strip (benzel) to be replaced.
Just because samsung did stupid move to glue them together and chose a cheap plastic for benzel I now have to pay a lot.
Waiting for HTC One XL(unibody) with S4 chipset. At least it would come for 3 yrs rather than breaking within 11 Months.
End of rant. Sh**ty cheap plastic Samsung.
Sent from my GT-I9100 using Tapatalk

same issue for me
i discovered that few weeks after buying the device
i kept the device with that crack but i worried about it
"happy" to see that i'm not the only one

Incredible! Saw this thread and wondered what the hell a 'benzel' was. After reading that it had happened to more people, I just checked my phone and it has the same crack.
Had never noticed this until now. Fortunately mine is a black phone, so not as noticeable as the white.

check my post open in may
http://forum.xda-developers.com/showthread.php?p=13714534#post13714534

Wow i had one also at the power button side, i thought it os scratch first but not. Interesting how could this be happen
Sent from my GT-I9100 using XDA

sachinaik said:
Just because samsung did stupid move to glue them together and chose a cheap plastic for benzel I now have to pay a lot.
Waiting for HTC One XL(unibody) with S4 chipset. At least it would come for 3 yrs rather than breaking within 11 Months.
End of rant. Sh**ty cheap plastic Samsung.
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
the phone isnt exactly broke though is it?? a part of the phone could have been designed better maybe but it isnt broke and doesnt stop he phone from working its also very hardly noticeable
ive had one sgs2 for around a year now and used it hard and it works great
oh and watch these videos and then try and say the sgs2 wont last 3 years if looked after properly
http://www.youtube.com/watch?v=nXOezJKpOsg
http://www.youtube.com/watch?v=uFKmvJ0zIiY
also the bezel scratches easy is there any point in replacing it when you could pay to have it fixed then drop the phone or scratch it against something??
wear marks are never good to see but they do happend

Replacing just the glass

I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2

May i ask how you replaced the glass, and where you bought it? Shattered mine couple of days ago...

Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
My English is not my native language, but considering the word adhesive, you must referring to the double side tape part that holds the digitizer and the glass together.
Assuming that, from my own experience it is a no-go. If you are experiencing sticking parts (ie. it's not properly glued) I am afraid you might have to replace the whole adhesive.
I had the same issue on my Desire HD and about 1 month after replacement, same as you kept pushing it to take the haze away, the inevitable happened. A tiny opening not being able to see with the naked eye, left enough room for dust to enter under the glass. One month later, there was so much dust in it that I had to buy a new full screen.
However, months later, I tried some old trick for future experiments You can eventually take a paint dryer, and try to heat up the lose part then applying some light pressure onit. This process should make the glue on the adhesive very soft and with a bit of luck it might stick on the glass.
I'd say perhaps 60-70 degrees. Don't worry, even 100 degrees won't break your screen unless u're heating it up for more than 10 minutes or so
GL

Fantastic, I'll give heat a try to get it to stick. Unfortunately I can't find the double sided tape anywhere otherwise I'd replace it. I'm in Australia so shipping is pretty expensive from most places outside of the country. I really appreciate the reply
I bought the glass alone off eBay, I believe it was around $30. To replace it took a lot of patience, a hairdryer on low for 15 mins to heat the glue up, finding a spot to slowly pry the glass away from the LCD. As I said, a lot of patience and a lot of mess since my screen was badly cracked and kept breaking off. Was worth it to save $300 though. Figured I could do it for $30 myself and if it broke I'd have had to of paid for both either way
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2

It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order

matzone said:
It seems you already build enough experience with heating up the device. I hope it does the trick for you. On the other hand the adhesive itself shouldn't be much of a problem. They are not made by Samsung itself and if it's not working and still refuse to buy a new glass, I'd just go to a repair shop as I did here in the Netherlands and ask the repair guy to order it. It shouldn't cost more than a few bucks. On top of that just google "note 2 screen adhesive" and look at some amazon/ebay hits, just take that picture/info to the repair guy as a reference to know what to order
Click to expand...
Click to collapse
Im from the netherlands too, which shops do you recommend? I bought my phone at coolblue, but I dont want to lose my phone for 2 weeks with repair..
Sent from my GT-N7100 using xda app-developers app

Ghetto_Cowgirl said:
I shattered my screen a few weeks ago and had great results replacing just the glass, not the digitizer, however I have a small problem. I didn't realize the adhesive was still on the LCD, I kind of ruined it along the left side of my phone, it doesn't stick properly, kind of looks like a bad screen protector. I have to keep pushing it down to get rid of the haze. What I'm wondering is, can I remove the adhesive all together and just replace the sticker bit along the border of the glass, so there's no adhesive between the glass and LCD without it affecting the performance of the touch screen? It works great as is, the haze is just annoying me.
Any help would be greatly appreciated, I'd hate to do it and lose the ability to use my phone
Sent from my Samsung Galaxy Note II using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Check out the link in my signature. You'll find what you're looking for with regards to the adhesive.
Sent from my GT-N7100 using xda premium

Display loose

Hi guys
Can you check curved edges part of display near top and bottom portion to see when pressed with little pressure whether screen goes down ? Especially near front facing camera .
Thank You

Checked near the front camera area and yes ,the screen goes down a little upon pressing in the edges with little pressure.

raserdude said:
Hi guys
Can you check curved edges part of display near top and bottom portion to see when pressed with little pressure whether screen goes down ? Especially near front facing camera .
Thank You
Click to expand...
Click to collapse
Mine as well.

@Yash24 , @tiberiuharcsa thanks guys for confirming regarding this issue.

Have it, too. But no problem. Seems to be normal.

allrightlite said:
Have it, too. But no problem. Seems to be normal.
Click to expand...
Click to collapse
Well I would't call a loose and slightly moving screen something normal...

tiberiuharcsa said:
Well I would't call a loose and slightly moving screen something normal...
Click to expand...
Click to collapse
And what is to do now? Maybe all Z Plays have this. You must look very critical to see this "issue". For me it's ok. There is no 100% perfect phone.
But is the issue bigger, then I would call the support.

allrightlite said:
And what is to do now? Maybe all Z Plays have this. You must look very critical to see this "issue". For me it's ok. There is no 100% perfect phone.
Click to expand...
Click to collapse
I agree, it's not a major issue, I was thinking to take of the screen completley and reglue it using some duble sided tape... But there is a risk of breaking the screen in the proces... It's not worth it

What about putting duck tape across top and bottom of the screen? Don't forget to make holes for loudspeaker, front camera and proximity sensor. And for microphone and fingerprint at bottom
So, you're all saying that tbe whole screen is moving a bit in the case? Check teardown and you'll see that is actually glued. Not my favorite solution but I suppose is cost effective.
Sent from my XT1635-02 using Tapatalk

Zeljko1234 said:
What about putting duck tape across top and bottom of the screen? Don't forget to make holes for loudspeaker, front camera and proximity sensor. And for microphone and fingerprint at bottom
So, you're all saying that tbe whole screen is moving a bit in the case? Check teardown and you'll see that is actually glued. Not my favorite solution but I suppose is cost effective.
Click to expand...
Click to collapse
Yah it's glued and very liberally glued at the top and the bottom of the screen. How do I know? Broke my screen a few months ago and replaced my screen myself.

flashallthetime said:
Yah it's glued and very liberally glued at the top and the bottom of the screen. How do I know? Broke my screen a few months ago and replaced my screen myself.
Click to expand...
Click to collapse
That's good news, actually. I've watched some tear down videos and guy was heating screen before trying to take it off.
From where and for how much you got replacement?

Zeljko1234 said:
That's good news, actually. I've watched some tear down videos and guy was heating screen before trying to take it off.
From where and for how much you got replacement?
Click to expand...
Click to collapse
Bought a screen off eBay, yes you need to heat up the glue underneath the screen with a heat gun.
Got the new screen in after I had to remove all the small piece of glass that was still glued but it's not an easy repair and I still have screen issues I assume the screen isn't the same quality as the original one which comes with a silver backing plate.
In bright sunlight my screen turns blue

The battery maybe will never die, because a bigger LiPo much longer live as a small one and we just load again all 2 or 3 days. So that's ok that's build in. Maybe the screen is much earlier broken. Hope it doesn't broke
My battery has 3600mAh(3597)

flashallthetime said:
Bought a screen off eBay, yes you need to heat up the glue underneath the screen with a heat gun.
Got the new screen in after I had to remove all the small piece of glass that was still glued but it's not an easy repair and I still have screen issues I assume the screen isn't the same quality as the original one which comes with a silver backing plate.
In bright sunlight my screen turns blue
Click to expand...
Click to collapse
So Moto should make it even less glued for easy repair
Btw, you forgot the price

Zeljko1234 said:
So Moto should make it even less glued for easy repair
Btw, you forgot the price
Click to expand...
Click to collapse
175 Canadian labour free because I did the repair.
No moto shouldn't use any less glue, just don't drop your phone is my advise

flashallthetime said:
175 Canadian labour free because I did the repair.
No moto shouldn't use any less glue, just don't drop your phone is my advise
Click to expand...
Click to collapse
I don't think that anyone is planning to drop the phone. Except maybe Turbo 2/Force.
https://youtu.be/fTJOL5ikuZA
Ironically, mine got green lines literally sitting on the desk.

I can confirm my phone has the same problem near the top left corner. It is so disappointing to see such a bad build quality.

If you observe carefully just above volume up button screen is not even inside the aluminum frame there is slight gap. And if you apply little pressure screen goes down. Is this normal ?

raserdude said:
If you observe carefully just above volume up button screen is not even inside the aluminum frame there is slight gap. And if you apply little pressure screen goes down. Is this normal ?
Click to expand...
Click to collapse
Yes, normal. Maybe it's make easier to get the sceen away to replace the battery. Normally you can't see this. You must really look exactly

allrightlite said:
Yes, normal. Maybe it's make easier to get the sceen away to replace the battery. Normally you can't see this. You must really look exactly
Click to expand...
Click to collapse
One more feature discovered