Develop Bugs

[Q] How to go from 4.0.3 Jedi Mind Trick to Cyanogenmod 10.0.0 Stable Release

Hello all just bought a new Samsung Galaxy SII from craigslist already rooted with 4.0.3 Jedi Mind Trick. After reading for what seems 4-5 hours i have been trying to put together how to properly without bricking switching it to 10.0.0 Stable as i use to use Cyanogenmod 2-3 years ago on my devices. Seem alot of things have changed and there is a cluster**** of stuff out there now. If you could direct me to a how to or show me how to do it i would greatly appreciate it!
Thanks all!

Assuming you have nothing personal to back up that you can't just download from google play or your google account again: download cyanogen 10 and it's gapps. reboot into recovery mode. factory reset, wipe data, wipe system, wipe cache, wipe dalvik. pick the install zip from sd card or so option, browse to cyanogen, then install gapps the same way. wipe dalvik again and reboot.

I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.

Alawishis said:
I was thinking of doing this myself JMT to CM10. I didn't think there was anything special to do same as flashing from any other ROM to CM10. If there is a special requirement I would think they'd post in in with the ROM post information.
Click to expand...
Click to collapse
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.

new ion? said:
honestly - i backed up everything to my external and then formatted the internal when i went from TW to AOSP for the last time. well worth it. nice folder clean up and then you can just manually take all the stuff you want back.
and you should just be able to odin on cwm or twrp - then flash the rom of your choice.
Click to expand...
Click to collapse
trying to look up how to do that now .... Searching the forum now... Might you be able to tell me real quick how? I already Downloaded the 5.2 file they suggest to use but can't find a working toturial that is just for flashing the cwm.

melvinator said:
so I attempted to install it and got stuck on the boot logo for 20 minutes or so. So I bricked it lol... Anyway I just flashed it with Odin to 2.3.5 but the link to download file for root capabilities is broken. What can i do? Do i have to go to ics first before i reattempt to go to 10.0.0?
Click to expand...
Click to collapse
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.

arcsine said:
If you get stuck at the boot logo, it's called a soft brick. You don't have to use ODIN or go back to ICS. Just make sure the ROM zip you downloaded isn't corrupt (check the size/m5d if possible), wipe everything, and reboot into recovery to try installing again.
Click to expand...
Click to collapse
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-

melvinator said:
I already used Odin to go back to 2.3.5
Btw I appreciate the help
My woman's is waiting that I fail to say I told you so -_-
Click to expand...
Click to collapse
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium

new ion? said:
You won't fail. Follow the guidelines step by step. Print it out, make notes. Anything. Read. The step by step guide works... that'll get you with cwm. Then, you can flash the zip you will put on your phone... either a SU zip or just a rooted ROM. Follow flashing instructions.
Just realized - you'll be way better off if, once you have cwm on, just format the internal ONCE YOU HAVE A ROM ON AN EXTERNAL SD CARD. then flash CM10. THEN you'll have a fresh AOSP install.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
Go back, format system, and then reinstall.
Sent from my SAMSUNG-SGH-T989 using xda premium

Update your recovery to twrp or cwm 6+ and don't use dark side scripts
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2

Please excuse my harshness but this is not as hard as many make it seem. I would say if it takes you more than a couple attempts maybe it is just not for you. I only say this because I would hate to see you mess up your phone. Now if you think a bootloop is a brick then we need to do things at a slower pace with you.
If you already have your phone rooted then
1.download goomanager from the playstore and then
2.open it up and allow it to grant permission from CM
3.hit menu button while goo manager is open
4.click on install OpenRecoveryScript
5.let it do its thing
6.reboot into your new TWRP recovery
7.Wipe/Data Factory Reset
8.Flash Rom
9.Flash Gapps
10.Reboot
You can throw in a backup of files somewhere in there if you like.... Your choice

melvinator said:
how long does the boot logo stay on for?
Had 2.3.5 - rooted via odin and have recovery 5.2.6 - did everything in proper order and wiping properly.
what am i skipping here? Still spinning taunting me, wish there was a way it would tell me if i did something wrong.
Click to expand...
Click to collapse
I had a bootloop when using CWM v6.0.1.5. So a friend of mine told me he had success with CWM v6.0.1.5 Touch. So I switched to the touch recovery and... SUCCESS.
Here's the link to CWM touch and non-touch:
http://forum.xda-developers.com/showthread.php?t=1893464

A boot loop could mean a bad download or bad flash but it is most definitely NOT a bricked device. All you needed to do was get a fresh download and move it to your SD card by mounting it in recovery. Then, wipe EVERYTHING but the SD. EVERYTHING. Then flash the ROM, Gapps and whatever radio. I go from CM to AOKP to other random TW roms all the time and never have issues.

The 2 best recoveries are twrp or my favorite because I'm used to it is cwm 6.0.1.5. http://forum.xda-developers.com/showthread.php?t=1844637
Also if your phone boot loops don't freak out' just either reboot to see if that works out first and if not reboot into recovery. Also with these new recoveries do not use dark side scripts.
Factory reset
Format system
Format cache
Format data
Flash ROM
Flash gapps
Reboot and enjoy
Sent from my SAMSUNG-SGH-T989 using xda premium

This did it!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app

Sorry for the necro on the thread, but I didn't want it to be stated I didn't look around some either.
I am going from JMT to CM and want to make sure it's as seamless as possible. I use CWM and usually usually use darkside complete wipes, but I read in a previous post not to use darkside. Is there a reason for this? I can't see why this wouldn't work as it's just a wipe.
Also I use Titanium Backup. Is it possible to backup my apps and data and restore them since its not TW any longer? I want to be able to restore as much of my data as possible and make sure I don't lose it.
P.S. - If thread necroing is not appreciated, I apologize.

[Solved] $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)

Basically this is what happened, I rooted my phone using TeamEpic-Root-from-Recovery-v5.zip and CWM-Recovery-LTE-SGS3-v5.tar.zip with Odin without any problems. Then I tried tampering with the framework-res.apk and I thought I did it correctly, I replaced it with the current res in the /system/framework folder of the internal sd. Then I rebooted my phone and bam stuck at the Samsung Galaxy S III screen. I've now tried finding a way to get into the internal sd card to replace the framework-res.apk back to original but my computer wont recognize it when in recovery or downloading mode. I have trying reflashing Clockworkmod several times and I've tried wiping the cache and factory reset. When I factory reset it says error mounting sd card, aborting. I am now out of ideas as to how to fix it and I'm not sure what to do with PIT files, which could be a possible solution. I am running Tmobile's Galaxy S3 T-999 16gb. All that being said, anyone who can help me get my phone back up and running I will reward you with $10 through paypal, because that's how desperate I am to fix my phone before someone finds out I bricked it!

Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
Something similar happened to me. What I did was use a different lower version of Odin and reinstalled the drivers, and everything worked fine. It may not work for you but it's just a, thought, and try reflashing with the T-Mobile Stock ICS rom.
Sent from my SGH-T999 using xda app-developers app

camacho.kyle said:
Something similar happened to me. What I did was use a different lower version of Odin and reinstalled the drivers, and everything worked fine. It may not work for you but it's just a, thought, and try reflashing with the T-Mobile Stock ICS rom.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply, what do you mean by reinstall drivers, like kies? I can't flash any rom's because I can't transfer the zip files over to the sd card since my phone won't recognize it since it won't go past the samsung screen. All I can do is flash clockwork mod from odin like .md5 and .tar. If I install a lower version of Odin what version did you use, and do you think flashing clockwork mod will be able to replace the framework-res.apk through odin?

Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
iAmYoungSpiffy said:
Thanks for the reply, what do you mean by reinstall drivers, like kies?
Click to expand...
Click to collapse
Reinstall the drivers for Odin, and you can even try reinstalling Kies too. Make sure you restart your pc after you reinstall kies and the drivers.
Sent from my SGH-T999 using xda app-developers app

Are the files you flashed for a I9300? They do not look familiar to me.

Re: $10 Reward to whoever can help me get my phone working again! (SOFT BRICK)
Aerowinder said:
Are you using a SGH-T999 or an I9300? If the former, use the links in my signature. Should fix it if it's not hosed.
Uninstall Kies (and the drivers if the Kies uninstall doesn't do it).
You may want to Odin a stock rom. If you do, it it before flashing a recovery.
Click to expand...
Click to collapse
He's using a T999
Sent from my SGH-T999 using xda app-developers app

camacho.kyle said:
He's using a T999
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Do you think changing the clockworkmod .tar.md5 file and flashing something different will have any affect? If so, what do you suggest?

Check out my signature, it has everything you should need (save the OS you want).

Aerowinder said:
Check out my signature, it has everything you should need (save the OS you want).
Click to expand...
Click to collapse
Wow thanks for that clockworck mod! It has much more features than v5 I'm gonna play around with it and see what I can come up with.

Aerowinder said:
Check out my signature, it has everything you should need (save the OS you want).
Click to expand...
Click to collapse
Thank you for the files, I'm now able to flash roms from my sd. I"ve flashed your clockwork and superuser. However, when I load up the phone I'm still getting stuck at the samsung logo

no external sdcard?

Did you try to flash another rom? What were you using, and what did you flash?

Why are you trying to fix a bricked ROM with CWM?
Just Odin a stock rom, and work from there. I don't know why you would keep trying to reflash recovery, that isn't going to do squat for you.

Go to the section/post in the general section on ODIN and pick a STANDARD ODIN image...Odin isn't that hard to manage.
Or use the S3 toolbox posting in the general section.
Most likely, this is because the rom has something funny in the cache...WIPE it to factory if you can get into a recovery...
Scott

mt3g said:
no external sdcard?
Click to expand...
Click to collapse
I do, 64gb

Aerowinder said:
Did you try to flash another rom? What were you using, and what did you flash?
Click to expand...
Click to collapse
I used Odin v307 to flash TeamEpic-Root-from-Recovery-v5.zip, i used clockwork mod to flash CWM-Recovery-LTE-SGS3-v5.tar.md5 (I got both of these from a post on these forums. I also tried superuser. Nothing is working do you have a download link to a ROM I could try?

You can't flash a rom from your external sdcard? or your internal? or either?

sbaeder said:
Go to the section/post in the general section on ODIN and pick a STANDARD ODIN image...Odin isn't that hard to manage.
Or use the S3 toolbox posting in the general section.
Most likely, this is because the rom has something funny in the cache...WIPE it to factory if you can get into a recovery...
Scott
Click to expand...
Click to collapse
I've now tried flashing Team Epic's ROM and I've wiped all cache restored to factory settings wiped dalvik cache, no progress.

mt3g said:
You can't flash a rom from your external sdcard? or your internal? or either?
Click to expand...
Click to collapse
Now that I updated my clockwork mod I'm able to flash from my sd card. Trouble for me is finding the right ROM that is compatible and appealing. I've tried a few now and whenever I flash them I go to boot up the phone and I get stopped on the samsung galaxy s iii logo. There has to be a way to wipe everything and flash a fresh clean rom. I've stayed up till 2 in the morning only to get up at 6 in the morning two nights in a row now totaling almost 10 hours of trying to fix my phone

iAmYoungSpiffy said:
I used Odin v307 to flash TeamEpic-Root-from-Recovery-v5.zip, i used clockwork mod to flash CWM-Recovery-LTE-SGS3-v5.tar.md5 (I got both of these from a post on these forums. I also tried superuser. Nothing is working do you have a download link to a ROM I could try?
Click to expand...
Click to collapse
From this quote it seems that you are flashing TWRP recovery and the flashing CWR right after it. That makes no sense. I don't use CWR on this phone but have used it before. So I'm not sure that LTE should be in the description as T999 isn't an LTE device. I could be wrong though. You can get an Odin-able version of either TWRP or CWR from this page.
Go here and download the stock image TMO T999UVDLJA. Follow the directions in the OP (make sure you unzip it first. Read and then read it again) . Fire up Odin and put the Root66 tar in the PDA slot (nothing in PIT). Flash the Root66. It will take about 5 minutes or so. Once it says Pass it should reboot. It WILL bootloop. If you have already flashed EITHER TWRP or CWR, then boot into recovery and Factory Reset. If you haven't flashed EITHER TWRP or CWR, then pull your battery and boot back into Download Mode. From there you put EITHER TWRP or CWR into the PDA slot and flash it. Pass. The reboot into recovery and Factory Reset.
First boot will take the longest bc it has to rebuild the /cache and /dalvik-cache. Let's get you up and running before you move on to flashing a custom ROM, OK?

[Q] Is there any way to completely erase everything from my phone?

I've searched both xda and Google and haven't been able to find anything.
Yesterday, I formatted everything possible via CWM6.0.2.3 (/storage, /data, etc.) and (of course) ended up having to reinstall the stock rom as I've effectively soft-bricked my phone.
After getting everything up and running again, I installed ROM Manager and it said that I still had TWRP still installed. What's more, the stock rom had the wallpaper and lock screen message I'd set up before formatting everything.
I later hooked my phone up to my pc and deleted everything from both internal storage and my sd card, though Windows showed that there was still some data left on the phone. I again did a fresh install of the stock rom and the previous background, message, and TWRP are still there.
I know I'm being a bit nitpicky, but where is this data hidden and how can I delete it?

demiipoet said:
I've searched both xda and Google and haven't been able to find anything.
Yesterday, I formatted everything possible via CWM6.0.2.3 (/storage, /data, etc.) and (of course) ended up having to reinstall the stock rom as I've effectively soft-bricked my phone.
After getting everything up and running again, I installed ROM Manager and it said that I still had TWRP still installed. What's more, the stock rom had the wallpaper and lock screen message I'd set up before formatting everything.
I later hooked my phone up to my pc and deleted everything from both internal storage and my sd card, though Windows showed that there was still some data left on the phone. I again did a fresh install of the stock rom and the previous background, message, and TWRP are still there.
I know I'm being a bit nitpicky, but where is this data hidden and how can I delete it?
Click to expand...
Click to collapse
You need to Odin a full wipe stock Rom that will format everything
Sent from my SPH-L710 using Tapatalk 2

BHurst said:
You need to Odin a full wipe stock Rom that will format everything
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
So if I were to do a full wipe with Odin, what would I check? Flash Lock, Nand Erase All, or T Flash?

demiipoet said:
So if I were to do a full wipe with Odin, what would I check? Flash Lock, Nand Erase All, or T Flash?
Click to expand...
Click to collapse
Only select Auto-Reboot. There should be a one-click that will prevent disaster. It is right here. Be aware of the 16 vs 32 GB option.
http://forum.xda-developers.com/showthread.php?t=1904099

The Root said:
Only select Auto-Reboot. There should be a one-click that will prevent disaster. It is right here. Be aware of the 16 vs 32 GB option.
http://forum.xda-developers.com/showthread.php?t=1904099
Click to expand...
Click to collapse
I've tried having Auto-Reboot and F-Time Reset checked and I still have residual files.
After trying the one click method you linked, absolutely nothing changed except I was no longer rooted. Still had same apps, lock screen, wallpaper, etc.

And you've done a factory wipe? What apps are remaining? I guess I should get more specific.

The Root said:
And you've done a factory wipe? What apps are remaining? I guess I should get more specific.
Click to expand...
Click to collapse
Yes, I've done a factory wipe. All of my apps remain; I still have Chrome, ROM Manager, Nova Launcher, etc.
If I delete everything, everything goes to stock except behind the scene things like TWRP still being installed (according to ROM Manager).

demiipoet said:
I've searched both xda and Google and haven't been able to find anything.
Yesterday, I formatted everything possible via CWM6.0.2.3 (/storage, /data, etc.) and (of course) ended up having to reinstall the stock rom as I've effectively soft-bricked my phone.
After getting everything up and running again, I installed ROM Manager and it said that I still had TWRP still installed. What's more, the stock rom had the wallpaper and lock screen message I'd set up before formatting everything.
I later hooked my phone up to my pc and deleted everything from both internal storage and my sd card, though Windows showed that there was still some data left on the phone. I again did a fresh install of the stock rom and the previous background, message, and TWRP are still there.
I know I'm being a bit nitpicky, but where is this data hidden and how can I delete it?
Click to expand...
Click to collapse
Did you watch this video? Follow the instruction to a T and you should be good to go..
http://www.qbking77.com/how-to-unroot/unroot-unbrick-the-samsung-galaxy-s-iii.html

doubledragon5 said:
Did you watch this video? Follow the instruction to a T and you should be good to go..
[link]
Click to expand...
Click to collapse
I'm relatively certain I followed the directions properly, and it works as far as getting back to stock. Though in the video he mentions that data wouldn't be wiped and that's what I was aiming for: wiping absolutely everything so that the phone is as when I first got it. No custom recoveries, no saved lockscreen message, nothing.

You may have to manually delete them then.
Sent from my SPH-L710 using Tapatalk 2

U need to flash a full complete stock image from odin. Im willing to bet you have a return to stock thread in your development section. If your using a mobile app remember to check stickys as they dont show by default.

cbass15 said:
You may have to manually delete them then.
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I've tried that (by hooking up my phone to my pc and deleting everything) :/ Just performed another factory data reset and Rom Manager still says I have CWM and TWRP already installed.
RomsWell said:
U need to flash a full complete stock image from odin. Im willing to bet you have a return to stock thread in your development section. If your using a mobile app remember to check stickys as they dont show by default.
Click to expand...
Click to collapse
I've tried returning to stock, both with the Odin method and the flash-only method :\

I have a " RESET_LJ7.zip" that will delete everything including recovery and reset flash counter, but it's a huge file, I'm not home, and I haven't uploaded it anywhere. You can search for that zip file name because I can't remember where I originally found it, or I can upload it tonight for you, it's just a flashable zip
Sent from my SPH-L710 using Tapatalk 2

imaconeheadXD said:
I have a " RESET_LJ7.zip" that will delete everything including recovery and reset flash counter, but it's a huge file, I'm not home, and I haven't uploaded it anywhere. You can search for that zip file name because I can't remember where I originally found it, or I can upload it tonight for you, it's just a flashable zip
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
Where are custom recoveries stored? And is there some way for me to access it? I would think right clicking "Phone" from Explorer and hitting "Format" would delete everything, but apparently it doesn't.

demiipoet said:
Where are custom recoveries stored? And is there some way for me to access it? I would think right clicking "Phone" from Explorer and hitting "Format" would delete everything, but apparently it doesn't.
Click to expand...
Click to collapse
No I'm not sure where the recovery is restored, I didn't make the zip I just have a copy of it because I needed it when I returned 2 phones to Sprint Like I said search that name for the zip, and if you still don't find it I'll upload it when home, that could be VERY late though
Sent from my SPH-L710 using Tapatalk 2

Here's stock LJ7. I assume you know how to use Odin so here's the file as posted by Skunk Ape1. All credit goes to him.
http://d-h.st/GVs
Oh and also, the files you delete while "formatting" the phone on the computer are only the extra app data (like back-ups and such) and other extra files. Things like recovery are in hidden system files that I believe can only be deleted through a specific clear (like system/data clear in TWRP) or by flashing a complete stock tar through Odin. Well you can also manually delete them but that takes a while.

imaconeheadXD said:
No I'm not sure where the recovery is restored, I didn't make the zip I just have a copy of it because I needed it when I returned 2 phones to Sprint Like I said search that name for the zip, and if you still don't find it I'll upload it when home, that could be VERY late though
Sent from my SPH-L710 using Tapatalk 2
Click to expand...
Click to collapse
I couldn't find the .zip via Google nor xda, but don't worry about it. My phone works perfectly fine and I can return to stock well enough. It just bothers me that there seems to be some secret folder/residual data that I can't seem to get rid of ><
porshce2 said:
Here's stock LJ7. I assume you know how to use Odin so here's the file as posted by Skunk Ape1. All credit goes to him.
http://d-h.st/GVs
Click to expand...
Click to collapse
I've already returned my phone to stock (several times) via the directions in the [HOW TO] Root, Unroot, Hotspot, Roms, Tips and more! 10/5/12 thread (I'm assuming both .tar would work the same way), but thank you.

porshce2 said:
Here's stock LJ7. I assume you know how to use Odin so here's the file as posted by Skunk Ape1. All credit goes to him.
http://d-h.st/GVs
Oh and also, the files you delete while "formatting" the phone on the computer are only the extra app data (like back-ups and such) and other extra files. Things like recovery are in hidden system files that I believe can only be deleted through a specific clear (like system/data clear in TWRP) or by flashing a complete stock tar through Odin. Well you can also manually delete them but that takes a while.
Click to expand...
Click to collapse
That is correct, the recovery is stored on a separate partition from the OS, so you cant clear that just by formatting system and such. Its also best to simply replace it and not clear it, because if you clear it you are completely removing everything from the recovery partition and that may or may not cause issues
@OP, One way you can remove your custom recovery (and replace it with the stock recovery) is by flashing a full stock tar. In the general section there is a thread titled "MA6 OTA!!!", read through there because some people posted links to how to get the stock recovery back on without having to ODIN a full stock tar (they needed to flash the LJ7 to MA6 OTA through the stock recovery)
Sent from my PG06100

CNexus said:
That is correct, the recovery is stored on a separate partition from the OS, so you cant clear that just by formatting system and such. Its also best to simply replace it and not clear it, because if you clear it you are completely removing everything from the recovery partition and that may or may not cause issues
@OP, One way you can remove your custom recovery (and replace it with the stock recovery) is by flashing a full stock tar. In the general section there is a thread titled "MA6 OTA!!!", read through there because some people posted links to how to get the stock recovery back on without having to ODIN a full stock tar (they needed to flash the LJ7 to MA6 OTA through the stock recovery)
Sent from my PG06100
Click to expand...
Click to collapse
Ah, thank you so much. The main thing that was bugging me was that I couldn't seem to get rid of CWM and TWRP, but now I know they're hidden.
But I've flashed CWM, TWRP, then went back to CWM and whenever I open Recovery Setup in Rom Manager, it says that both CWM and TWRP are already installed, which is what's bugging me. Rom Manager works just fine and all, but I'm just really curious about why/how I can have two recoveries installed at the same time (I thought flashing one would delete the other).

demiipoet said:
Ah, thank you so much. The main thing that was bugging me was that I couldn't seem to get rid of CWM and TWRP, but now I know they're hidden.
But I've flashed CWM, TWRP, then went back to CWM and whenever I open Recovery Setup in Rom Manager, it says that both CWM and TWRP are already installed, which is what's bugging me. Rom Manager works just fine and all, but I'm just really curious about why/how I can have two recoveries installed at the same time (I thought flashing one would delete the other).
Click to expand...
Click to collapse
This is why I hate the dependence that people have built on touch recoveries and recovery controlling apps. It makes people forget that the recovery works like a computer bios. It's not hidden. It's just on its own partition. When you fire it up, it's essentially booting a separate partition so that you can control everything on the main partition and nothing from your rom or kernel are in use at the time.

[Q] Cannot flash anything

T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.

moebawlz said:
T989 without any SD card in it, the one I had died apparently new one on order. Went to flash the latest PA rom but kept getting error 7 using CWM. I updated my recovery to the latest TWRP and still will not flash. I tried updating to the newest radio UVMC6, but that wont flash. I am currently on CM10.1 nightly. My process for flashing is recovery, superwipe, flash, which is when the flash errors out and I re wipe and then I can flash my CM10 back on. So I can flash CM10 all day long but nothing else. I searched on here and found that the ATT version of this phone has this problem and you have to flash an AOKP and then flash whatever you want, other phones with similar problems say use ODIN and flash stock and then go from there. I am just looking for any advice on this situation. I could not find anything specific enough in my search to help me and I am hoping someone here can. Thanks in advance.
Note: I have also tried flashing CM10.1 RC5 and has the same problems.
Click to expand...
Click to collapse
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium

soupysoup said:
For onw those superwipe scripts are not needed with twrp, u might be getting the error from that, are u trying to flash from internal SD card since ur external died? That might cause it but I don't think so, I would suggest trying a manual wipe of all partitions, data, system, cache, dalvik, 2x , then flash, if that doesn't work try using Odin, go back to stock and start over, that should fix it definetly
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.

moebawlz said:
Thank you... I wasnt sure about superwipe on TWRP since I just put it on and came from CWM. I am trying to flash from the internal card and the new external card will be at my doorstep tomorrow so I will drop that in as well. I will drop back in once I get all this done and hopefully all goes well.
Again thanks.
Click to expand...
Click to collapse
Good glad I can help, let me know how it all goes, now I'm interested lol
Sent from my SAMSUNG-SGH-T989 using xda premium

Ok so I got my new SD card. Tossed that in, just figured I would try flashing from the external, no luck there. Same issues.
Odin back to stock using this tutorial http://forum.xda-developers.com/showthread.php?t=1513359&page=3
Used http://forum.xda-developers.com/showthread.php?t=2195283 this to regain root.
Got CWM back on but now I cannot flash SuperUser
When I go to flash Superuser it says
Mounting System
Deleting System:bin/su...
Deleting System:xbin/su
Extracting files to SYSTEM
Setting SYSTEM:bin/su permissions to 06755...
Creating SYSTEM:xbin/su symbolic link...
E: Error in /emmc/Superuser-3.0.7-efghi-signed.zip
(Status 0)
Installation aborted
So on the plus side I didn't brick the phone... downside now I am back to Gingerbread and currently stuck here...
Possibly a bad zip file?
Any ideas on this?

Quick update... I am a moron... Did not realize that root is kept with this restore... Got Superuser from market and am good to go.
Installing TWRP now and will have an update on the flash soon.

OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place

moebawlz said:
OK... the fun seems to have just begun
I cannot install TWRP from GooManager. No clue why, looking on here and I found //techerrata.com/browse/twrp2/hercules (cant link too new of a member)
So as it seems I can download the .img and GooManager should see it and if that doesnt happen I can install it through the terminal with these commands
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p22
OR flash it with ODIN... Which I would assume I get the .tar file and follow the same process as putting the recovery files in?
Aside from TWRP being an issue, I tried installing the PA rom with CWM and I got this:
Installing update
set_perm:some changes failed
E:Error in /sdcard/pa_hercule...zip
(Status 7)
Installation aborted
The same error I had in the first place
Click to expand...
Click to collapse
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.

meekrawb said:
I'm not sure what your overall problem is, but if you are going to install TWRP do not use Goo Manager or the img file. They have been messing up peoples phones. Odin the tar or try the zip from the TWRP thread.
Click to expand...
Click to collapse
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...

moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Click to expand...
Click to collapse
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.

i went to flash with goo last night and it bricked the phone kind of, i had to ODIN and reflash the CWM again and bam the phone rebooted no problem

meekrawb said:
If you can boot into TWRP, then they must have fixed the Goo problem.
It seems like you have tried most everything. Maybe you should Odin back to stock. If you are comfortable doing it, that is.
Click to expand...
Click to collapse
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?

Lucky for me I kept a backup saved on my PC from before I did anything here. So I am back to the CM 10.1 Nightly I started on for the time being.
Is there any other method of flashing a rom that I might be able to try?

moebawlz said:
I did Odin back to stock before. I am still on stock gingerbread right now with root access and am getting the errors I have been. I followed the tutorials in the sticky thread that I posted before that got me back to stock.
Within TWRP I tried installing the newest Cyanogen Mod and got
E:Error executing updater binary in zip
Error flashing zip
When I try installing the PA rom I get the same error
Any thoughts? Would going back to stock through Odin and doing this again potentially fix it? or is that a shot in the dark?
Click to expand...
Click to collapse
It would be a shot in the dark. I did a Google search for your error and a couple of people said they were able to fix it by using TWRP 2.3. That was for different phones though. Maybe try that before going stock.

I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3? I also found this
http://forum.xda-developers.com/showthread.php?t=1639673
or
http://forum.xda-developers.com/showthread.php?t=1658418

Just a thought here... I keep gettin emmc errors... I was reading about upgrading and downgrading TWRP through the Terminal Emulator and it said use emmc or sdcard depending on what the phone reads it as.
When I first got the phone i recall seeing emmc when i would go into any file browser. Now it just says sdcard0 (internal) & sdcard1 (external)
So how can I get recovery to stop looking for emmc and start looking for sdcard0?
Unless I am way off in left field here with this.

moebawlz said:
I am by no means a pro at this and am still learning as I go. Just to make sure of what I am doing, can I Odin TWRP 2.3?
Click to expand...
Click to collapse
Yes, use Odin and the 2.3.3.0 tar from the techerrata website. I like using the Odin method because I have never had a problem upgrading recovery that way. I don't know about the emmc errors because I have only used the dd method like twice.
Edit: Maybe your internal memory is corrupted? I'm not sure how to test for that though.

moebawlz said:
Well that could be a problem... I just got GooManager to do what I wanted it to do before I saw this message. If I overwrite it with the tar will that be ok or am I better off starting this process over and Odin back to factory stock again?
Along with that after I got TWRP working through Goo Manager again I tried flashing PA again and I had the same error as I did in the first place.
Maybe my phone just hates anything but the nightly I had before...
Click to expand...
Click to collapse
I think u must be getting bad DL then because none of that sounds right lol, if u got twrp to load into your device and all is working fine then the only other option is a bad DL, try checking the DL with a root browser or something to see the size of the file, status 7 errors are from the zip, usually bad install script in the ROM, which could be caused by a bad DL, check the DL size and let me know
Sent from my SGH-T989 using xda premium

went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?

moebawlz said:
went back to 2.3.3 and still having the same error.
Is there a way to correct any possible errors in my internal memory?
Click to expand...
Click to collapse
If the DL is good, I don't know what else to tell u that is very strange indeed, but interesting too, I've never not been able to install at all, I'm curious..
Sent from my SGH-T989 using xda premium

Samsung GS3 (d2att) not booting but have TWRP Recovery available

Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!

DroidJay123 said:
Hello all-
I was just recently running CM 10.2 RC1 but had to do an install of the correct gapps as it was randomly rebooting. Well the device now is stuck on the Samsung Galaxy S3 screen with the BLUE cyanogen. I have access to TWRP and am able to reflash the .zip file for CM 10.2 RC1 yet it still won't boot? I did the wipe of dalvik, cache, data and system but still no luck? The device is NOT recognized in Odin. I just want to get the phone up and running again, even if it means root is lost.
Please help!!
Click to expand...
Click to collapse
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface

Mr.Rageface said:
Do you have it put into Download Mode before you plug it into the computer for Odin to recognize it? If I had it plugged in before I put mine in download mode Odin would not want to pick it up.'
Mr. Rageface
Click to expand...
Click to collapse
Yes it is recognized once in Download mode...sorry about that. What can I do to get it up and running? I am not new to flashing, etc so it's got me really upset that I cant get it to boot. What could possibly go wrong?

Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM

http://fs1.d-h.st/download/00023/E5R/I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 You can download that file and put it in the PDA section once you run Odin and run it from there. This will put your phone back to the Stock Rom 4.1.1 and you can restart from there if you want.
Mr. Rageface

xXFl4sh said:
Get a sd card>download a new rom and put the rom in the sd card and flash like a normal ROM
Click to expand...
Click to collapse
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?

DroidJay123 said:
I do have an sd card. Phone isn't recognized in Windows so Im not familiar with how I can get the ROM file onto the card from the computer? Can I download the latest AT&T Stock ROM and flash it via Odin?
What your saying is flash a ROM from the external SD card?
Click to expand...
Click to collapse
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.

Mr.Rageface said:
No, with the file I told you to download you do not need to have a SD card because you can't boot into the rom you have Windows will not recognize the phone like normal to drag and drop to it. So with this file you can save it to your computer, Open Odin, put your phone into Download Mode, plug it into the computer so that Odin detects it. Then Click PDA and browse to the file you downloaded and tell it to use that file and then Run the process and it will install the original rom onto your phone.
Mr. Rageface
Edit: Sorry I did not realize your previous comment was to xXFl4sh.
Click to expand...
Click to collapse
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??

DroidJay123 said:
Ok I did the process with the file you referenced. Everything succeeded in Odin with no errors. It's still stuck on just showing the Samsung Galaxy SIII screen but now without the blue cyanogen? What is wrong with this phone??
Click to expand...
Click to collapse
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface

Mr.Rageface said:
Can you get into recovery mode by any chance? If you can do that then it should be possible to do a factory reset from within Recovery Mode and possibly get you past the boot screen. If that doesn't help let me know and I will see what else I can find out for you. Also what all did you have checked and unchecked when you Ran Odin to reinstall the Stock Rom? If you had any of them other than Auto-Reboot on that may also have caused a problem http://forum.xda-developers.com/showthread.php?t=1722686 here is a forum that will show you how to use Odin. I apologize for not remembering about telling you what to check and uncheck. But try recovery mode first and do a factory reset and if that does not work, redo the odin install this time only having Auto-Reboot checked.
Mr.Rageface
Click to expand...
Click to collapse
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.

DroidJay123 said:
Thanks man! I went back into Recovery and did a factory reset/wipe data and it finally got past that screen. Thanks again for your guidance and help. Any ideas as to what could have possibly caused the issue in the first place? I do want to re-root the device again and I am assuming my best bet is to flash a Stock ROM like you referenced with ROOT injected? What order should I follow, flashing a Stock w/Root injected...and then the Recovery of choice? Or vice-versa? What do you recommend?
Again, your timely responses were greatly appreciated. Was really worried I would have to take it to ATT.
Click to expand...
Click to collapse
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface

Mr.Rageface said:
It could have been several things that could cause the ROM to do that. I recommend that you make sure that your Bootloader is up to date and then go from there. Download the newest CWM, do a backup of your current rom so that you can flash back to it if you phone messes up. Then when you try to install a new ROM make sure you Wipe: Data then Cache, then Dalvik Cache in Advanced then Format /System. Then from there Install the new Rom, then install the correct GApps, then wipe Cache and Dalvik cache then Reboot into System. It takes messing up a few times to get it right but as long as you follow the guides pretty close and keep a good backup that you know works or keep the knowledge of how to Inject the Stock Rom to your phone when it messes up you shouldn't have much to worry about.
Mr. Rageface
Click to expand...
Click to collapse
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!

DroidJay123 said:
Sounds good. Thanks for the info. Obviously the device is not currently rooted or did the Factory Rom file you gave me have root injected? Do you have a recommended way of achieving Root with the Samsung SG3? Just installing a custom Recovery won't achieve Root, correct?
Thanks!
Click to expand...
Click to collapse
BTW, how can I confirm I have the most recent bootloader version? It looks like my phone's current baseband version is i747UCDLK3. I did download the boot_CWM_i747UCDMG2.zip file and put it on the internal storage. Do I just want to flash that file to update my bootloader?
Thanks again!
-Jay

Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface

Mr.Rageface said:
Yea that is the newest baseband and yea you just flash it. As far as rooting the phone and everything I recommend this forum. http://forum.xda-developers.com/showthread.php?t=1725839 It has just about everything you could need to know!
Mr.Rageface
Click to expand...
Click to collapse
Thanks for the information. The phone that has been all screwed up and the reason I posted a thread in the first place is my gf's GS3. I have her's rooted again and running. I am going to update her baseband version and then install a custom ROM so she's up to 4.3.1. As far as mine goes, I have been fine. I myself also still have the outdated bootloader version. Is it ok to just flash that update for the bootloader without it doing anything wrong? I'm asking this since I'm rooted and running a custom ROM with no current problems. In other words, I don't want to end up saying "it wasn't broke, why did I mess with it" ? I did bookmark that thread you referenced in your last message. Damn that thread is LOADED with just about everything one would possibly need to know about Android and making it their own.
So my g/f accepted the OTA update today (not knowing obviously) and she got updated to 4.3 via AT&T, unfortunately!! I attempted to flash the latest Liquid Smooth ROM and I continue to get a FAILED message during installation. It mentions a bunch of bootloader numbers ( I am assuming the only ones this ROM is compatible with?) So is there any way to roll the bootloader back to a compatible one or just go a different route for the custom ROM?
Also, I attempted flashing the file to update my baseband yet when I so into the device, it doesn't show as having the updated version? Is there a different way of doing it or maybe a different file?

I'm not to sure about the troubles that may come about since your gf went with the 4.3 OTA but If I am not mistaken it will need to be downgraded before you try doing anything else to it and if it is not showing that you updated your bootloader on your phone I recommend grabbing the App called Root Checker to double check then look for another file, tho unless it failed it should have updated it or messed up your phone one.