[Q] Black Screen - Won't Boot - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

Was using the Galaxy S3 toolkit to update cwm, went to flash an AOSP rom intended for d2att models, went to reboot the device... It flashes the samsung logo briefly then sits at a black screen with a solid amber LED. ODIN does not see it, my PC sees the device but I can't flash anything at all. Can't get to download mode either holding the power and any combination of the volume keys does nothing. Someone please help point me in the right direction to fix this. Thanks in advance.

If or PC sees it u could check and see if ADB sees it and maybe wipe and flash from there
Sent from my SAMSUNG-SGH-I747 using xda premium

Download mode is Vol down + home + power. Can you get into recovery?

Thanks. I can only get into download mode at the moment. I'm downloading the stock firmware now and going to try flashing it in ODIN. Hopefully I'll get something to work here.

SirFork said:
Thanks. I can only get into download mode at the moment. I'm downloading the stock firmware now and going to try flashing it in ODIN. Hopefully I'll get something to work here.
Click to expand...
Click to collapse
Sounds good. Keep us posted.
Update cwm in rom manager next time

ODIN passed the flash. How long should the first boot take?

SirFork said:
ODIN passed the flash. How long should the first boot take?
Click to expand...
Click to collapse
If it takes longer than 10 or so minutes, pull the battery, replace and booting into stock recovery. Wipe data and cache. Reboot

It take bit longer than normal but it should boot within a minute or two
Sent from my SAMSUNG-SGH-I747 using xda premium

Pbwizkid said:
It take bit longer than normal but it should boot within a minute or two
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
It's common to have to pull the battery and wipe data in recovery after flashing stock in odin

Related

Bricked HELP

so my phone will boot cwm but will not boot up. it goes to the SAMSUNG screen and just holds. please help.... any ideas would help
Ur not bricked try to get into download mode pull ur battery out slide ur keyboard out press and hold the # 1 key and the power at the same time if ur able to boot into download mode ur ok just use odin to restore back to stock
Sent from my SPH-D700 using XDA App
usarmy321 said:
so my phone will boot cwm but will not boot up. it goes to the SAMSUNG screen and just holds. please help.... any ideas would help
Click to expand...
Click to collapse
If you're able to boot into cwm, then you're fine.
I'm assuming you were flashing a ROM, so just wipe everything x3, and reflash the ROM or a different one.
What he said ^^^^^ or follow this video
http://www.youtube.com/watch?v=YQ2g6J1JgjU&feature=youtube_gdata_player
Sent from my SPH-D700 using XDA App
Here you go. Read, read, READ! And if you get lost/stuck, come back here for help.
- How To Fix A Brick -
If this helped, hit "Thanks"...
Sounds like you may still have stock kernel on a custom rom.
nikon120 said:
Sounds like you may still have stock kernel on a custom rom.
Click to expand...
Click to collapse
That's what I was thinking. Try flashing a kernel.
Sent from my SPH-D700 using XDA Premium App
i cant get into download mode need another option, ill try loading an other kernal, but i tried the update but no luck
i cant get into download mode need another option, ill try loading an other kernal, but i tried the update but no luck
usarmy321 said:
i cant get into download mode need another option, ill try loading an other kernal, but i tried the update but no luck
Click to expand...
Click to collapse
Now that doesn't make sense. You can safely get into CWM, but not into download mode?
I have to ask to make sure. With the phone off, you're holding the 1 key on the keyboard and then holding the power button?
Well if that's the case, get to a PC and insert your SD card into a reader. Download a kernel, like Genocide v2 or etc to the card, and boot into CWM to flash the new kernel off the card. See if that helps.
yes i hold down 1 and the power button, and i tried the genocide2.0 and it still does the same just the samsung screen has a different logo
Sounds like my hardware locked vibrant try flashing cm7 or miui then see if you can make it back to dl mode
Sent from my SPH-D700 using XDA App
Are u rfs or ext4? Cuz sounds like ur trying to flash a incompatible rom
Sent from my SPH-D700 using XDA Premium App
usarmy321 said:
yes i hold down 1 and the power button, and i tried the genocide2.0 and it still does the same just the samsung screen has a different logo
Click to expand...
Click to collapse
What ROM are you trying to flash? If you are getting the Sammy screen, you aren't far away from success
Sent from my SPH-D700 using XDA Premium App
Update: I have tried all new kernals and new roms, now my phone will not boot to root anymore, nor download mode, it will only freeze on SAMSUNG screen only. I Think its time to take a trip to sprint
usarmy321 said:
Update: I have tried all new kernals and new roms, now my phone will not boot to root anymore, nor download mode, it will only freeze on SAMSUNG screen only. I Think its time to take a trip to sprint
Click to expand...
Click to collapse
If your phone has life you should be able to get into download mode. Take your battery out, press the power button for 10 seconds. With the battery still out connect with cable to computer and press and hold the 1 key on the keyboard and then add pressing and holding the power button. Download mode will appear. Connect to Odin now.
Sent from my SPH-D700 using XDA App

[Q] HALLPPP! CWM? can't enter downloadmode! only recovery?

I'm no coder but im no newb either been flashing with little to no issues since Heroc
but wtf t989!?
How i got here. flashed cwmT via term following the upgrade instructions. flashed cm9 but for got darkwhip got loop and died. trashed a usb cable got the battery charged, and the fun begins
no matter what i do phone can only successfully reach recovery mode cwmT 6.0.1.2 . I try to enter download nope vibrate samsung recovery (like a joke) no problem i thought... then it chokes up in the middle of anyflash!? i cant darkside wipe i cant wide factory i cant restore my backup...
i'd sure love to odin a funtioning recovery or fastboot this POS
any ideas?
IRC link?
Pull battery out, get sutff ready prior to odin, eithet recovery or stock img, then put battery back on, then put phone on download mode, vol. Up + vol.down then plug usb, tadda! You're on dowload mod make sure you have the right files, homie, if you are able to boot on recovery right now, that means you can boot into dowload mode just know the right button combo
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
dudedude987 said:
I'm no coder but im no newb either been flashing with little to no issues since Heroc
but wtf t989!?
How i got here. flashed cwmT via term following the upgrade instructions. flashed cm9 but for got darkwhip got loop and died. trashed a usb cable got the battery charged, and the fun begins
no matter what i do phone can only successfully reach recovery mode cwmT 6.0.1.2 . I try to enter download nope vibrate samsung recovery (like a joke) no problem i thought... then it chokes up in the middle of anyflash!? i cant darkside wipe i cant wide factory i cant restore my backup...
i'd sure love to odin a funtioning recovery or fastboot this POS
any ideas?
IRC link?
Click to expand...
Click to collapse
Have you tried putting a twrp recovery flashable zip as in flash twrp usig cwmt?
Then from there you can flash any rom too
Sent from my SGH-T989 using Tapatalk 2
Hey, I had the same problem. Could only get into cmw 6.0.1.2 and all flashes would just freeze up. I flashed darkside superwipe till it stopped, pulled the battery, flashed an old ics ROM, looked like it froze again so i pulled battery and started phone normally, booted perfectly. Then downloaded ROM manager from play store and flashed cwm. Phones been working beautifully ever since.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
suprakarma said:
Pull battery out, get sutff ready prior to odin, eithet recovery or stock img, then put battery back on, then put phone on download mode, vol. Up + vol.down then plug usb, tadda! You're on dowload mod make sure you have the right files, homie, if you are able to boot on recovery right now, that means you can boot into dowload mode just know the right button combo
Sent from my SAMSUNG-SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
... thanks but i cant get into download mode it goes strait to recvoery.... i know the right button combo...
iNeedICS said:
Have you tried putting a twrp recovery flashable zip as in flash twrp usig cwmt?
Then from there you can flash any rom too
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
no i havnt ill check that out
bfloFBR said:
Hey, I had the same problem. Could only get into cmw 6.0.1.2 and all flashes would just freeze up. I flashed darkside superwipe till it stopped, pulled the battery, flashed an old ics ROM, looked like it froze again so i pulled battery and started phone normally, booted perfectly. Then downloaded ROM manager from play store and flashed cwm. Phones been working beautifully ever since.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
so? lol flash battery pull flash untill one of them completes? sounds like your phone was working fine and you didnt wanna wait for it to come around lol
Use a usb jig.
If that doesnt boot you in Download mode, then u messed up BIG TIME!
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
dudedude987 said:
... thanks but i cant get into download mode it goes strait to recvoery.... i know the right button combo...
no i havnt ill check that out
so? lol flash battery pull flash untill one of them completes? sounds like your phone was working fine and you didnt wanna wait for it to come around lol
Click to expand...
Click to collapse
No, none of them fully completed, thats why i had to battery pull. For the first several flashes i let it sit for 10min+ hoping it would work itself out, to no avail. The battery pulls were out of frustration. I just did trial and error until it eventually worked. Sometimes you have to figure things out for yourself.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
bfloFBR said:
No, none of them fully completed, thats why i had to battery pull. For the first several flashes i let it sit for 10min+ hoping it would work itself out, to no avail. The battery pulls were out of frustration. I just did trial and error until it eventually worked. Sometimes you have to figure things out for yourself.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Give this a try:
1) Go to Samsung Kies & download " Kies " on your PC.
2) Run Kies & click on the Tools tab.
3) Select " Firmware upgrade settings " & follow the on screen steps. Depending on your download speed this my take 1hr.
4) Your phone is back to stock ICS 4.0.4. Put this file on the root of your SD card " root.zip " You can also find this zip in the installed folder for Toolkit Beta.
5) Download & install " [APP] Samsung Galaxy S II Toolkit Beta V2.4 *ICS ROOT READY!!!* "
6) Follow the on screen steps to flash CWMT. This will use odin to flash CWM Touch back on your phone.
7) After odin opens click pda & select the recovery file " recovery.tar.md5 " it should be the only file listed.
8) After CWMT is on your phone and phone has rebooted unplug the usb wire from the phone & turn it off.
9) Pull battery wait for 10 sec then replace battery now push in and hold both volume up & volume down buttons at the same time then hold the power button until the phone vibrates. *Do not let go of the volume buttons until you see CWMT*. It will flash the screen one time then you are now ready to flash the root.zip file you put on your SD card.
10) Find the root.zip file you put on your SD card, now flash it *note it may not flash right away just keep trying until it flashes. Then reboot.
11) You should now be stock & rooted & ready to flash your hart out.
Let me know if this helps, I have done this 4x now & it works with no problems.
dudedude987 said:
I'm no coder but im no newb either been flashing with little to no issues since Heroc
but wtf t989!?
How i got here. flashed cwmT via term following the upgrade instructions. flashed cm9 but for got darkwhip got loop and died. trashed a usb cable got the battery charged, and the fun begins
no matter what i do phone can only successfully reach recovery mode cwmT 6.0.1.2 . I try to enter download nope vibrate samsung recovery (like a joke) no problem i thought... then it chokes up in the middle of anyflash!? i cant darkside wipe i cant wide factory i cant restore my backup...
i'd sure love to odin a funtioning recovery or fastboot this POS
any ideas?
IRC link?
Click to expand...
Click to collapse
First plug in the USB to you phone
Second press and hold Vol up and down while you turning on you phone release only the power button then download mode should works now go back to stock and install twrp recovery and try it now
Sent from my SGH-T989 using xda app-developers app

[Q] galaxy s3 wont boot after new rom installed

I installed a version of Aristodemos (slim) on my phone and nothing happens literally. It does not boot into recovery mode. I'm still searching for the ZIP file that I downloaded. Please help!
Does it power up or can you get it into download mode?
ok. I had aristodemos version 3 on it and put this zip on my phone after the wipe process........slim-i717-2.7.0-official.zip. 87,995,996 bytes. now it doesnt turn on or how you say power up. any thoughts?? if I could get it to turn on I could zip my other rom back on. Thanks for any and all help!!
danbear7777 said:
ok. I had aristodemos version 3 on it and put this zip on my phone after the wipe process........slim-i717-2.7.0-official.zip. 87,995,996 bytes. now it doesnt turn on or how you say power up. any thoughts?? if I could get it to turn on I could zip my other rom back on. Thanks for any and all help!!
Click to expand...
Click to collapse
Have you tried a factory and data reset to factory settings from the recovery? Usually fixes the problem. Always do that before and maybe after a custom rom zip installation.
He said it wont boot into recovery, but he didn't answer whether or not he can get into download mode. Thats his only hope if recovery isn't booting.
I cant get it on turn on period. if I try t boot into recovery, it does nothing. very stange!!
oh yea..... nor does it go ino download mode for some reason. sorry about that. what happened??
danbear7777 said:
I cant get it on turn on period. if I try t boot into recovery, it does nothing. very stange!!
Click to expand...
Click to collapse
This may not be it but are you sure the phone is charged and has enough battery life? I'm wondering what battery % you were at when you started the process?
Maybe try removing the battery for 10 seconds and trying to boot into recovery again?
phone was fully charged.
danbear7777 said:
ok. I had aristodemos version 3 on it and put this zip on my phone after the wipe process........slim-i717-2.7.0-official.zip. 87,995,996 bytes. now it doesnt turn on or how you say power up. any thoughts?? if I could get it to turn on I could zip my other rom back on. Thanks for any and all help!!
Click to expand...
Click to collapse
According to what you wrote you installed a ROM for 717 not 747 that could be your problem
Sent from my SAMSUNG-SGH-I747 using xda premium
that is what i installed.I made sure (at least i thought i did) that it was for the at&t version. you are more than likely right. so where do I go from here?? ugh!!
If you can't get into download mode you are screwed if you can get into it flash stock firmware through odin
Sent from my SAMSUNG-SGH-I747 using xda premium
screwed how?? im on a work computer so i am limited to access and stuff.
Try to get into Download Mode:
FROM A POWERED-DOWN STATE - BATTERY REMOVED
- Insert battery, then press and hold Vol-, Home button, and Power.
- Press and hold Vol-/Home/Power, Insert Battery.
Click to expand...
Click to collapse
From download mode, if that works which it should, use Odin to reflash stock ROM then install CM10 over it after reflashing CWM.
Sounds like you have a hard brick man. Mobiletechvideos Jtag service is what you may need.
Sent from my HTC One X using Tapatalk 2
Does it do anything (screen flash, led flash, vibrate) when you try to power it up?
It's most likely a hard brick if he flashed i717 in his I747 phone...
Sent from my SGH-I747 using xda app-developers app
Deoxlar said:
It's most likely a hard brick if he flashed i717 in his I747 phone...
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most likely but if it does anything at all thinking a jig might be worth a shot to get to download mode....I always try the cheapest way first. 6 bucks from eBay vs sending away.
http://forum.xda-developers.com/showthread.php?t=1916796
just ran across this give it a try
smartguy044 said:
http://forum.xda-developers.com/showthread.php?t=1916796
just ran across this give it a try
Click to expand...
Click to collapse
Isn't this for the international version?

[Q] Bootloop

So I'm running an unlocked rogers galaxy note 2 I1737M. I was using clean rom 3.3 then today it just crashed everything. I tried to reboot to recovery and well it got stuck in a boot loop there. This was at work so now several hours later I am sitting here trying to reset set my phone. I have tried odin to restore to the stock files, hell I would be happy with just that. I used the imiage found in the refrence thread of the android develpment. any tips? links? help of any kind? Anything will be greatly apreceated.
worst part is I got it yesterday.
EDIT: I thought I should add that I am using odin v1.85 and that I am unable to get the phone to boot into anysort of recovery, ok I did once but can't get it to do it again. Not even stock.
Hold vol up home then power hold all 3 samsung comes up then relese power.....restore backup...
Sent from my SAMSUNG-SGH-I317 using xda premium
twanskys204 said:
Hold vol up home then power hold all 3 samsung comes up then relese power.....restore backup...
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
I'm unable to boot into the recovery, custom or stock. It displays the samsung logo then once again reboots itself......
Had the same issue.
What kernel were u on.
Only fix I founfd that didn't wipe data was ro download CWM recovery on a pc and place with odin. Boot into download mode by holding volume down, home and power. Might take a few tries between boot loops.
Sent from my SGH-I317 using xda premium
NightHawkUndead said:
Had the same issue.
What kernel were u on.
Only fix I founfd that didn't wipe data was ro download CWM recovery on a pc and place with odin. Boot into download mode by holding volume down, home and power. Might take a few tries between boot loops.
Sent from my SGH-I317 using xda premium
Click to expand...
Click to collapse
I was using Stock LJ2 kernel CMW-flashable. After several hours of fighting with TWRP I was able to install CWM using odin and got my self out it looks like. The only thing with CWM is that data wipe seems to crash the recovery so I hope this dirty install of the rom I had saved on their works just fine.

[Q] Stock recovery flash through odin not working

Hello all,
previous searches have yielded limited answers so I apologize if this has been answered already.
I've been running CM for the past 5 or 6 months and have had zero problems with it. Last week however something happened and I got stuck in a boot loop. Me being a genius obviously didn't make a backup of anything so I flashed the stock rom via odin back onto the phone. After flash through odin I get the green light and pass indication. I go to restart the phone in recovery and I get the sick droid with the red yield sign above him. I then go to wipe/factory reset then reboot and it goes as far as the Samsung logo doing its animation and then stops just after and freezes. A regular power up without going into recovery first results in a boot loop.
I tried the recovery process through Kies and get the "This devices version cannot be updated" error. I am running the current version of Kies. I'm assuming its because it knows I've been rooted?
Note 2 Sprint
thank you in advance.
Rhett
eshleman said:
Hello all,
previous searches have yielded limited answers so I apologize if this has been answered already.
I've been running CM for the past 5 or 6 months and have had zero problems with it. Last week however something happened and I got stuck in a boot loop. Me being a genius obviously didn't make a backup of anything so I flashed the stock rom via odin back onto the phone. After flash through odin I get the green light and pass indication. I go to restart the phone in recovery and I get the sick droid with the red yield sign above him. I then go to wipe/factory reset then reboot and it goes as far as the Samsung logo doing its animation and then stops just after and freezes. A regular power up without going into recovery first results in a boot loop.
I tried the recovery process through Kies and get the "This devices version cannot be updated" error. I am running the current version of Kies. I'm assuming its because it knows I've been rooted?
Note 2 Sprint
thank you in advance.
Rhett
Click to expand...
Click to collapse
Which stock version did you flash through odin? Mc2, mk4, or ne2?
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
Which stock version did you flash through odin? Mc2, mk4, or ne2?
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ne2
I dont think kies has NE2 yet so you can only use odin. Boot into recovery (stock is fine) and do a factory reset. Then power off (do not reboot) and go into download mode and flash ne2 tar again through odin. Then hopefully you will be able to boot. Note that 4.4.2 is a large rom and will take around 5 mins to actually boot up.
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
I dont think kies has NE2 yet so you can only use odin. Boot into recovery (stock is fine) and do a factory reset. Then power off (do not reboot) and go into download mode and flash ne2 tar again through odin. Then hopefully you will be able to boot. Note that 4.4.2 is a large rom and will take around 5 mins to actually boot up.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for the response,
When I go to wipe/reset I get the dead android with the red triangle. I am assuming there is a fault in my stock recovery. I still went ahead and wiped/reset data and removed battery after, waited a few minutes, inserted battery, booted into download mode, flashed stock ne2, everything with odin passed. I booted phone up and it immediately went into a boot loop with the samsung logo for about 5 minutes then shut off completely. the battery has a full charge.
I'm open for other options if some are available.Would it be possible to skip the stock recovery and go straight into a custom recovery? I'm planning on rooting and installing CM again but obviously making a backup this time.
eshleman said:
Thank you for the response,
When I go to wipe/reset I get the dead android with the red triangle. I am assuming there is a fault in my stock recovery. I still went ahead and wiped/reset data and removed battery after, waited a few minutes, inserted battery, booted into download mode, flashed stock ne2, everything with odin passed. I booted phone up and it immediately went into a boot loop with the samsung logo for about 5 minutes then shut off completely. the battery has a full charge.
I'm open for other options if some are available.Would it be possible to skip the stock recovery and go straight into a custom recovery? I'm planning on rooting and installing CM again but obviously making a backup this time.
Click to expand...
Click to collapse
Use odin to flash philz touch recovery 6.0.7.9.
Sent from my SPH-L900 using XDA Free mobile app
skye206 said:
Use odin to flash philz touch recovery 6.0.7.9.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
Like he said use odin to flash philz 6.07.9 but uncheck reboot option. Once everything is done disconnect and pull battery (this is safe as long as everything finished flashing). Then do recovery key sequence while inserting battery. Then flash your rom. If still having issues with booting I have a special file that you can odin that should fix it.
Sent from my SPH-L900 using XDA Premium 4 mobile app
jlmancuso said:
Like he said use odin to flash philz 6.07.9 but uncheck reboot option. Once everything is done disconnect and pull battery (this is safe as long as everything finished flashing). Then do recovery key sequence while inserting battery. Then flash your rom. If still having issues with booting I have a special file that you can odin that should fix it.
I downloaded the 6.07.09 philz zip file, however I'm having trouble finding the tar.md5 file to flash through odin.
Also, once philz touch recovery is installed can I immediately flash a recent version of CM11 nightly straight from my external SD card?
Thank you,
Rhett
Click to expand...
Click to collapse
Here is a direct link to 6.07.9 tar.md5 https://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/philz_touch_6.07.9-l900.tar.md5/
Once you flash it boot into recovery and flash cm11. If cm11 wont boot I have another file for you to use but it is only needed if cm11 does not boot.
Sent from my GT-N7105 using XDA Premium 4 mobile app
jlmancuso said:
Here is a direct link to 6.07.9 tar.md5 https://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900/philz_touch_6.07.9-l900.tar.md5/
Once you flash it boot into recovery and flash cm11. If cm11 wont boot I have another file for you to use but it is only needed if cm11 does not boot.
Sent from my GT-N7105 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I really appreciate the help,
I successfully flashed Philz recovery through odin. Booted to recovery and went to wipe/reset for a new rom, then installed zip - CM11 (yesterday's version) flashed successfully, selected reboot, samsung logo flashed and then phone shut off.
Am I rooted automatically if I have Philz recovery? They only thing I can think of is I don't have an OS at all on my device or I am not rooted?
Thank you in advance
eshleman said:
I really appreciate the help,
I successfully flashed Philz recovery through odin. Booted to recovery and went to wipe/reset for a new rom, then installed zip - CM11 (yesterday's version) flashed successfully, selected reboot, samsung logo flashed and then phone shut off.
Am I rooted automatically if I have Philz recovery? They only thing I can think of is I don't have an OS at all on my device or I am not rooted?
Thank you in advance
Click to expand...
Click to collapse
Yeah kind of thought that might happen. Flash the attachment from this (fix.tar) http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287 through odin and it should fix your issue. Also you are not rooted automatically because of Philz. Root is controlled by the rom but almost every custom rom (omni excluded) comes rooted so hope that helps that question.
jlmancuso said:
Yeah kind of thought that might happen. Flash the attachment from this (fix.tar) http://forum.xda-developers.com/showpost.php?p=53035491&postcount=287 through odin and it should fix your issue. Also you are not rooted automatically because of Philz. Root is controlled by the rom but almost every custom rom (omni excluded) comes rooted so hope that helps that question.
Click to expand...
Click to collapse
I'm assuming the fix.tar changes the recovery to CWM? I flashed the fix zip successfully, rebooted, CM logo came on for a couple minutes, I did a happy dance, then the phone shut off again. Pulled battery, turned back on and its stuck in a boot loop now with samsung logo.
eshleman said:
I'm assuming the fix.tar changes the recovery to CWM? I flashed the fix zip successfully, rebooted, CM logo came on for a couple minutes, I did a happy dance, then the phone shut off again. Pulled battery, turned back on and its stuck in a boot loop now with samsung logo.
Click to expand...
Click to collapse
Do a factory reset (normal not clean for new rom) and see what happens.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
Do a factory reset (normal not clean for new rom) and see what happens.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I flashed the fix.tar. it changed the recovery to CWM which only gives me the option to wipe data/factory reset, whereas with the philz I had the option to wipe for just a new rom. or a complete reset
Good then you can mix them up. Do the factory reset. Also you sure it is cwm or is it the stock recovery? I have not used that file since 4.4.2 came out but thought it was all stock.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
Good then you can mix them up. Do the factory reset. Also you sure it is cwm or is it the stock recovery? I have not used that file since 4.4.2 came out but thought it was all stock.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes, after the fix.tar flash the recovery changed to CWM. However, I'm still having no luck. I tried system wipe/restore then reboot but the phone boots to samsung logo then shuts off. Ill go over the steps I've taken again.
1. Flashed stock recovery through odin - got red triangle above dead android. I'm assuming problem with stock recovery
2. Flashed Philz recovery through odin - did factory reset, flashed current version of CM11, boot, samsung logo comes on then phone shuts off.
3. Flashed fix.tar. through odin.- boot, CM logo comes on like its booting for a minute, then phone shuts off, pull battery, restart phone then goes into a boot loop. wipe data does the same thing. After a couple times of that I'm now at a point where when I reboot from recovery it goes straight to samsung logo then shuts off. Holding the power button (like a regular startup) does nothing. The phone is only responsive to recovery mode and download mode. Not to mention the phone has to be plugged in to either the computer or the wall for any of this to work. Even though the battery indicator says the charge is at 100%.
eshleman said:
Yes, after the fix.tar flash the recovery changed to CWM. However, I'm still having no luck. I tried system wipe/restore then reboot but the phone boots to samsung logo then shuts off. Ill go over the steps I've taken again.
1. Flashed stock recovery through odin - got red triangle above dead android. I'm assuming problem with stock recovery
2. Flashed Philz recovery through odin - did factory reset, flashed current version of CM11, boot, samsung logo comes on then phone shuts off.
3. Flashed fix.tar. through odin.- boot, CM logo comes on like its booting for a minute, then phone shuts off, pull battery, restart phone then goes into a boot loop. wipe data does the same thing. After a couple times of that I'm now at a point where when I reboot from recovery it goes straight to samsung logo then shuts off. Holding the power button (like a regular startup) does nothing. The phone is only responsive to recovery mode and download mode. Not to mention the phone has to be plugged in to either the computer or the wall for any of this to work. Even though the battery indicator says the charge is at 100%.
Click to expand...
Click to collapse
So you can not run on battery power at all? Sounding like a hardware issue. If you know someone else with a note 2 I would try swapping batteries. After that I am not sure what to try.
Sent from my SCH-I605 using XDA Premium 4 mobile app
jlmancuso said:
So you can not run on battery power at all? Sounding like a hardware issue. If you know someone else with a note 2 I would try swapping batteries. After that I am not sure what to try.
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have a friend that also has a note 2, I'll try his battery this weekend and let you know what happens. Thanks again for all the help.
eshleman said:
I have a friend that also has a note 2, I'll try his battery this weekend and let you know what happens. Thanks again for all the help.
Click to expand...
Click to collapse
A different battery didn't help. I reflashed the stock rom, where I get the original problem of the red exclamation point laying down android screen. Is there a way to rid the download screen of the system status as being displayed as "custom" and the knox warranty void: as 1 with the condition the phone is in? I believe if I can reset the counter and prove it is a hardware problem they will cover it under warranty. If not I believe my only option is to destroy/crush the phone beyond repair and claim the insurance which is $200 to replace the phone.
Can you post the link where you got the stock rom?
Sent from my SPH-L710 using Xparent Cyan Tapatalk 2

Categories

Resources