I need to find a way to output video to AV input so i can connect my note 2, to my stereo in my car any clue how i can do this?
Just use a Left Right channel to 3.5mm wire...
EDIT: Oh... For video I think we only support HDMI but there might be a dongle you could buy..
Sent from my SPH-L900 using xda premium
You'll need to output hdmi via mhl, then use a hdmi > AV adapter to connect to the radio.
☆SoA: Son's of Android™☆
I like to break stuff!
What Evil said ^^^^
Sent from my SPH-L900
Thanks for the help all the hdmi > AV adapters i cant find have to be powered anyone know of any that dont need power or i can power from a usb maybe? thanks.
vwgti18 said:
Thanks for the help all the hdmi > AV adapters i cant find have to be powered anyone know of any that dont need power or i can power from a usb maybe? thanks.
Click to expand...
Click to collapse
Best thing to do is buy an AC> DC power inverter for your vehicle. I use one to charge my note 2. They turn the 12v cigg lighter into a 120v wall outlet.
☆SoA: Son's of Android™☆
I like to break stuff!
This is one thing that sucks on newer devices. I remember on my HTC Touch Pro and TP2 you could just plug into your deck using the rca inputs. It was nice to be able to play stuff off your phone directly to the monitor.
Plus because I kept the cables in my car, it was easy to take in a house and plug in and play videos and pictures. I did this all the time for my Grams, to show her my little ones. She was never into newer HD tv's lol. Oh well, I'm sure HDMI connections will be really available on decks before you know it.
Sent from my Mackafied Sprint Galaxy Note II using XDA Premium.
KB112 said:
This is one thing that sucks on newer devices. I remember on my HTC Touch Pro and TP2 you could just plug into your deck using the rca inputs. It was nice to be able to play stuff off your phone directly to the monitor.
Plus because I kept the cables in my car, it was easy to take in a house and plug in and play videos and pictures. I did this all the time for my Grams, to show her my little ones. She was never into newer HD tv's lol. Oh well, I'm sure HDMI connections will be really available on decks before you know it.
Sent from my Mackafied Sprint Galaxy Note II using XDA Premium.
Click to expand...
Click to collapse
A lot of the new decks already have hdmi pigtails in the back or hdmi ports in the front.
☆SoA: Son's of Android™☆
I like to break stuff!
-EViL-KoNCEPTz- said:
A lot of the new decks already have hdmi pigtails in the back or hdmi ports in the front.
☆SoA: Son's of Android™☆
I like to break stuff!
Click to expand...
Click to collapse
Yeah I have seen some, but I mean it's not quite mainstream yet. At least not enough for me to switch out decks! Lol
Sent from my Mackafied Sprint Galaxy Note II using XDA Premium.
vwgti18 said:
I need to find a way to output video to AV input so i can connect my note 2, to my stereo in my car any clue how i can do this?
Click to expand...
Click to collapse
You can find plenty of HDMI to RCA adapters on the internet. The problem is that HDMI is a digital signal, and RCA is analog. And from your picture, your device is looking for an analog signal. Hence, you need to get something to convert the HDMI signal into an Analog one. They exist, but are not cheap. The cheap ones, not used, are $200. Require a power source. And we haven't even touched is the phone's video output going to be accepted by the stereo's video input. If the video output doesn't match--resolution and refresh rate--you're not going to have a picture. On PCs, you can these settings in the video control center or use special applications. For Android, I don't think they exists because the TVs with HDMI are new enough that a designed to accept the video phones are putting out; the phone are also designed to output video HDTV will accept.
Never mind you'll still need some kind of car charger to power the HML adapter. In my experience, using your phone and HML, will drain your battery, although slower because it doesn't need all the 2.0mha the charger puts out, but doesn't give the phone enough power to maintain it's current charge status.
The other issue, it's hard to find converters for HDMI to composite RCA. Not many people are in demand for them since a lot of the old TVs that only had those inputs are gone. They exists though.
That all said, my question would be exactly what applicaitons or tasks are you trying to don on your GN2 though your car deck? If it's just play music or audio into it, If so, then just get a 3.5mm to RCA cable. They can be purchased for a couple dollars. Here's a link for Monoprice.com: http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10218. Just make sure you get a male to male version. There are options as well, depending your car deck. If it has a casette deck, you can get 3.5mm caasette adapter. If you want more robust, you can get a 3.5mm FM car cigarette transmitter such as Coby CA 745; the problem is you need to have a clear FM station, which can change depending on your geographical location. I like that model because you can change FM to be used, and has cigarette charge port. The benefit, you're not dependent on the car having any kind of audio output ports, or cassette player.
If you're wanting to play video, ie use the mirroring function of the phone, I'm thinking you be much better served with a newer car deck that can support HDMI video in. Heck, depending on the screensize of you deck, it may be better just to get a car dock for the GN2 and just send the audio through your car stereo. Another alternative, use the Wifi hotspot function of the GN2 and use a tablet. I'm not saying I've ever used the GN2 to use Google Navigation and my 10" tablet to have NHL Center Ice going while driving to a meeting an hour away, but you can see how it can be done:
I've seen some pretty creative mounting methods use with the Nexus 7.
Hopefully this was helpful
lovekeiiy said:
You can find plenty of HDMI to RCA adapters on the internet. The problem is that HDMI is a digital signal, and RCA is analog. And from your picture, your device is looking for an analog signal. Hence, you need to get something to convert the HDMI signal into an Analog one. They exist, but are not cheap. The cheap ones, not used, are $200. Require a power source. And we haven't even touched is the phone's video output going to be accepted by the stereo's video input. If the video output doesn't match--resolution and refresh rate--you're not going to have a picture. On PCs, you can these settings in the video control center or use special applications. For Android, I don't think they exists because the TVs with HDMI are new enough that a designed to accept the video phones are putting out; the phone are also designed to output video HDTV will accept.
Never mind you'll still need some kind of car charger to power the HML adapter. In my experience, using your phone and HML, will drain your battery, although slower because it doesn't need all the 2.0mha the charger puts out, but doesn't give the phone enough power to maintain it's current charge status.
The other issue, it's hard to find converters for HDMI to composite RCA. Not many people are in demand for them since a lot of the old TVs that only had those inputs are gone. They exists though.
That all said, my question would be exactly what applicaitons or tasks are you trying to don on your GN2 though your car deck? If it's just play music or audio into it, If so, then just get a 3.5mm to RCA cable. They can be purchased for a couple dollars. Here's a link for Monoprice.com: http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10218. Just make sure you get a male to male version. There are options as well, depending your car deck. If it has a casette deck, you can get 3.5mm caasette adapter. If you want more robust, you can get a 3.5mm FM car cigarette transmitter such as Coby CA 745; the problem is you need to have a clear FM station, which can change depending on your geographical location. I like that model because you can change FM to be used, and has cigarette charge port. The benefit, you're not dependent on the car having any kind of audio output ports, or cassette player.
If you're wanting to play video, ie use the mirroring function of the phone, I'm thinking you be much better served with a newer car deck that can support HDMI video in. Heck, depending on the screensize of you deck, it may be better just to get a car dock for the GN2 and just send the audio through your car stereo. Another alternative, use the Wifi hotspot function of the GN2 and use a tablet. I'm not saying I've ever used the GN2 to use Google Navigation and my 10" tablet to have NHL Center Ice going while driving to a meeting an hour away, but you can see how it can be done:
I've seen some pretty creative mounting methods use with the Nexus 7.
Hopefully this was helpful
Click to expand...
Click to collapse
Yea thanks for your input. I was just about to order this http://www.amazon.com/gp/offer-list...l?ie=UTF8&colid=&coliid=&me=&qid=&seller=&sr=
and this
http://www.amazon.com/gp/product/B00A9H30LU/ref=oh_details_o00_s00_i00?ie=UTF8&psc=1
and see if i can get it to work but after u said all that idk if i really want to risk spending the $50 what do u think?
As for buying a new deck thats out of the question i just got the new late 2012 model JVC.
I already do music. I wanted video so i can play movies and play youtube but mostly wanted my google maps to show on the big screen so i could just tuck my phone away.
The HML cable is a decent price. You may it to be useful for showing off pictures or videos at home or at friends' on the TV rather than the phone. I see the cable still being useful if what your propose doesn't work out.
I can't so for certain if it's going work. It looks promising. I like the Eleckcity has 60 positive reviews (4 or 5 stars) out of 78. Fifty dollars isn't a bad cost. I would just check the return the policy. I would write Eleckcity and ask about returns if they product doesn't work or as expected. Also, there is a review who used it in a similar manner that you're trying to do. I would definity write that person to find out more details on the headunit and so forth.
The only thing I would be weary about is powering the Eleckcity. Since it doesn't have it's own powersouce, it's going to draw it's power from the USB. I don't know for certain, but I don't believe the USB power on the GN2 sends out power. If it does, I don't think it's much. It's only used the OTG USB cable with items that had their power. And the MHL has as power supply. If it doesn't power it, I think a simple USB powerhub could do the trick. I'm sure there is probably some kind of cigarette car adapter usb hub that could found or the like.
I understand the goal. I don't know how much effect and cost is worth it for you to how often you would use the maps and video features on your deck's screen. In looking at some of the JVC multimedia head units, screen size isn't very larger since they range 6.1" to 7". So I put eh screen size as negligible factor, by my standards. Obviously, use the headunit's screen would be more elegant look, espically compared to having three windowshield/dashboard car docks, a 150W USB cigarette car power inverter, and cables hanging in from of the dash; one is the for the satellite radio. Then again, I only need that stuff about once every six months. So, maybe a simple dock such as iOttie or Clingo may work well with a car charger for phone if you only plan to use it say, once a month or less. T
The last paragraph is just proposed plan B and C, and so forth.
Related
Is there something available that connects to usb port and has analog audio out and usb port to connect charger? I want to use only one plug in my car for charging and listening to music from my cell.
Regards, Bart.
Sent from my SGH-T959 using XDA App
Why would you need an adapter when there is a perfectly good headphone port right next to the microUSB port?
So I don't have to connect 2 cables.
monkey1911 said:
Why would you need an adapter when there is a perfectly good headphone port right next to the microUSB port?
Click to expand...
Click to collapse
Can we read for 2011? This is an observation not an attack. It's post like this which serve no purpose. He clearly said he just wants to use one wire. Let's all be thankful in this new year for unofficial froyo and gb which better our phones and while we are at it let's better ourselves. Happy New Year!
You would still have to connect two cables to the adapter in question. Two cables going into an adapter in your phone doesn't look any neater than them going into their respective ports. If you need them at hand, a twist tie near the ends would keep them together.
Unless you have a newer car radio, and keep all your music on your sd card, you could just plug into the usb, play your music through the radio interface and charge at the same time.
Using Bluetooth connection to the sound system in my car for listening the music and hands free talking, and simple USB car charger. So, i have 1 cable for everything.
What Bluetooth adapter are you using. I may go this route.
Sent from my SGH-T959 using XDA App
I love my Jabra Cruiser!!!
Do a google search (XDA won't let me post links yet) and you can find this for less than $50 delivered. I paid $99.00 for mine, but have no regrets.
All of the phones audio are relayed to an FM station on the car stereo (never been a fan of FM transmitters, but this one rocks). I mostly listen to tech podcast, and pandora going down the road.
Basically I'd like to connect my phone up to my receiver, to stream music while I workout. Would this be possible? Could I use the headphone jack, and would that be very good quality?
I was looking into a microusb to hdmi converter, but not sure that'd work yet.
Iczer said:
Basically I'd like to connect my phone up to my receiver, to stream music while I workout. Would this be possible? Could I use the headphone jack, and would that be very good quality?
I was looking into a microusb to hdmi converter, but not sure that'd work yet.
Click to expand...
Click to collapse
Go to Radio Shack (or whatever) and get a cable that is a 3.5mm stereo plug on one end, and stereo RCA (red and white plugs) on the other.
A lot cheaper, and HDMI is going to be WAY overkill unless you are trying to play high-quality sound files stored right on the phone... Anything you're going to be streaming from Pandora or any online source will be about FM radio quality.
The cable I mentioned above is even over-qualified for most internet streaming sources.
Dalmus said:
Go to Radio Shack (or whatever) and get a cable that is a 3.5mm stereo plug on one end, and stereo RCA (red and white plugs) on the other.
A lot cheaper, and HDMI is going to be WAY overkill unless you are trying to play high-quality sound files stored right on the phone... Anything you're going to be streaming from Pandora or any online source will be about FM radio quality.
The cable I mentioned above is even over-qualified for most internet streaming sources.
Click to expand...
Click to collapse
I saw an micro usb to HDMI for $10 off monoprice, that was the only reason I was looking at that route.
Iczer said:
I saw an micro usb to HDMI for $10 off monoprice, that was the only reason I was looking at that route.
Click to expand...
Click to collapse
That would make sense. I haven't seen them that low (of course, I haven't really looked for one either, so I guess it doesn't mean much for me to say that. )
The one disadvantage of using the USB would be that I don't think your phone would charge while plugged into the receiver.
If I remember the HDMI specs correctly, some cables are capable of delivering a charge, but very few (if any) components have the proper ports to provide a charge...yet.
Use an auxiliary to auxiliary . I use one in my truck (no bt) and my radio at work. $10 at Target.
Google Android Fan Network @chefdave12118.
I like the BlueBridge Bluetooth to stereo adapter:
http://www.buy.com/pr/product.aspx?sku=213820936
I use it at home, in my truck. Love it!
Monoprice has a USB to hdmi with charger port for 10 bucks. Search mhl
I have no clue what section this question would belong in. Mods, feel free to move this if there is a better place for it.
I haven't used my iPod since getting my first android, three androids ago. I do however have an iPod dock connected to my AV receiver at home, and a dock connector wired into my car. Has anyone figured out a way to use iPod accessories with their android? Ideally I wish I had the programming knowledge to emulate the iPod and have all the controls functional but that is way beyond what I'm capable of. I was thinking of getting a female dock connector and connecting a micro usb and 3.5mm audio jack so I could both charge and output audio through it. Also, what comes out of the MHL/USB on the Galaxy? Could I get analog audio from it so I would just have one usb cable to connect to charge and listen? Thoughts?
Come on... no one?
It -may- charge w/ the dock to micro usb adapter. That's pretty much it.
You won't get audio out of it, nor data more than likely (even power is up-in-the-air) simply because the system doesn't have the software to work with the connections made available w/ that adapter.
Edit: Also, you probably should've posted this in Q&A.
It would be pretty difficult to do something like that and would probably require building a device that would sit between the iPod dock and the Android phone.
It might be possible to do something like this. As long as your dock uses analog audio instead of usb audio like my car radio uses.
goo . gl / oeCYW Remove the spaces. I'm a new member and can't post links yet.
So you are saying you think it's looking to see if an ipod is connected before it looks for the audio coming out of it? I was under the assumption it was always ready for it since I need to first manually switch to the ipod input on the stereo... hmmm...
t0ny7 said:
It would be pretty difficult to do something like that and would probably require building a device that would sit between the iPod dock and the Android phone.
It might be possible to do something like this. As long as your dock uses analog audio instead of usb audio like my car radio uses.
goo.gl/oeCYW Remove the spaces. I'm a new member and can't post links yet.
Click to expand...
Click to collapse
Nice. That's exactly what I was thinking of doing.
Well that link was encouraging enough that at least someone has gotten this to work. I went ahead and ordered a female dock connector from here http://aloaudio.com/30-female-dock-connector-with-wire-board.html. At worst I'm out $14.35. I'll update the thread with what I find out.
The dock connector arrived today. I haven't messed around with the one in my car but I did test the one on my AV receiver. Things I've learned:
1) If the receiver is on, there is a steady 4.9 volts available to charge my Galaxy.
2) There is some sort of check to see if an ipod is connected before it will switch to listen for audio on the input pins. I can actually hear a click of a relay when I connect my ipod that I do not hear with the wire connected.
3) I placed the ipod in the dock to get it to switch. I then I wired a headphone cable to the audio in pins of the dock. To my surprise I could play music from my Galaxy just fine.
If I could just figure out what it is looking for to know whether or not an ipod is connected, this should work just fine.
I just want to update this thread. I finally got around to messing with this again (yes 4 months later).
I have it working perfectly for audio in my car! As long as pins 1 & 2 are shorted it switches the head unit into iPod mode and audio gets sent to the speakers. Pins 2, 3, 4 are Ground, Right, and Left audio. I would record a video of it working but the only thing I have is my GN and I can't use it to play music and record video.
I gave up on my home theater receiver. There's power there to charge it but I can't figure out how to fool it to listen for the audio.
Y not just buy the ipod to universal Bluetooth adapter? That way the phone doesn't even have to be docked? Sprint sells it
I've been using this to play music through my old ipod fm transmitter, works great.
http://www.amazon.com/Grom-Audio-iPhone-converter-regular/dp/B00545WG4O
jjlyons said:
I've been using this to play music through my old ipod fm transmitter, works great.
http://www.amazon.com/Grom-Audio-iPhone-converter-regular/dp/B00545WG4O
Click to expand...
Click to collapse
I may have to buy one of those for my Klipsch iFi speakers. I was thinking about getting the official dock from Expansys, running this audio cable to the iPod input, and adding some other stuff via NFC tag to make the setup sort of like Ford Sync in my car.
[Q]iPAQ bluetooth keyboard working with Galaxy Nexus?
Hi everybody:
I had a iPAQ BT foldable keyboard (SPP, no HID), and I wish it works on my Galaxy Nexus for daily use (when playing games, or typing with Chinese input methods).
I've tried some apps, and keyPro Demo works, but it gave me a new IME which only support English input. I wondered if anybody here give me some help. Thanks all!!
hey guys, I know this thread is a little outdated but there is another option to get audio and charging from the 30-pin apple connection. I personally haven't tried this but it looks like it could work:
http://www.amazon.com/CableJive-doc...UTF8&qid=1342110636&sr=8-2&keywords=dock+boss
I own an Audi Q5 and it can stream music from either iPod, USB or 3.5'' mm jack using a Media Link Cable. It sounds nice, but your device has be locked in the glove box!! So i decided to get this device from amazon - "http://www.amazon.com/gp/product/B0087XSV08/ref=oh_details_o01_s00_i01". It streams music to your receiver via Bluetooth. I love this solution because i almost always use Google Map for my GPS navigation.
It works great because i have a Bose Sounddock with an iPod jack too.
1cewolf said:
I may have to buy one of those for my Klipsch iFi speakers. I was thinking about getting the official dock from Expansys, running this audio cable to the iPod input, and adding some other stuff via NFC tag to make the setup sort of like Ford Sync in my car.
Click to expand...
Click to collapse
I'm a little late to this party but I too am looking for a solution to convert my Klipsch iFi into a Bluetooth dock so we can use our Evo LTE's on it. I have a 1st gen iPod Nano on it but 2gb of music (the 4gb one we had died) just isn't getting it done. I also want the ability to run internet radio stations and playlists and what not. I bought about the cheapest iPod Bluetooth adapter available on eBay and was disappointed that it did not work. The LED on top wouldn't even light up to indicate it was getting power. They seller sent me another one and unfortunately it also does not work. The seller assured me that he tests every single one that is sent (uh huh, I believe you) so it would appear as though this particular adapter will not work. As soon as I can get a refund I will start going up the list as far as price goes. Just wonder if you were ever able to find a solution for your iFi to save me the effort of order several different adapters until I find one that works. I don't see why this one didn't work as the iFi should work just like every other iPod dock on the market as far as how it interfaces with the iPod/adapter.
---------- Post added at 12:14 PM ---------- Previous post was at 12:11 PM ----------
inspiron41 said:
I own an Audi Q5 and it can stream music from either iPod, USB or 3.5'' mm jack using a Media Link Cable. It sounds nice, but your device has be locked in the glove box!! So i decided to get this device from amazon - "http://www.amazon.com/gp/product/B0087XSV08/ref=oh_details_o01_s00_i01". It streams music to your receiver via Bluetooth. I love this solution because i almost always use Google Map for my GPS navigation.
It works great because i have a Bose Sounddock with an iPod jack too.
Click to expand...
Click to collapse
This adapter you linked to looks exactly like the adapter I got from eBay but I only paid $15.99 w/free shipping. If anyone else is interested in trying out one of these types of adapters I would check eBay first. While mine didn't work for my iFi specifically the seller has good feedback so I would imagine it works for most. My issue is probably Klipsch iFi specific. I plan to order a different version from another seller for a few bucks more and can report back my findings if it works or not as another option but I wouldn't spend $40 for what looks exactly like what I paid $16 shipped for.
I want to output my video to my dvd screen in my car. My input for the aux of the dvd player are RCA. Previously I was using a 3.5mm jack to output to RCA and this worked with my old phone (t mobile vibrant). Is there anyway to output the HDMI on this phone to rca inputs? Any help is appreciated. I posted in this thread because I'm assuming the fix would be an accessory. Thanks.
I doubt you'll find a cable to do it. hdmi is digital and the composite signal needed by the vehicle is analog. You'll need something like this:
http://www.amazon.com/HDMI-Composite-S-Video-Converter-3RCA/dp/B0047PDBP0/ref=pd_sxp_grid_i_0_0
Thanks for the quick reply, that was what I was afraid of. Guess I'm stuck with audio out for now.
Possible fix
tacomaguy20 said:
I want to output my video to my dvd screen in my car. My input for the aux of the dvd player are RCA. Previously I was using a 3.5mm jack to output to RCA and this worked with my old phone (t mobile vibrant). Is there anyway to output the HDMI on this phone to rca inputs? Any help is appreciated. I posted in this thread because I'm assuming the fix would be an accessory. Thanks.
Click to expand...
Click to collapse
I finally came up with a solution that works for me. My goal was to output the video of my phone to my dvd screen in my car. The dvd player has RCA inputs. Well rather than buying an hdmi adapter and trying to find a dc power source compatible with my car, I found an alternative solution. My old phone is a t-mobile vibrant which outputs video through a 3.5mm adapter which splits into RCA inputs. It worked fine for playing video on the screen but was outdated and I had to upgrade. The GS3 only outputs hdmi and Bluetooth is not an option for video so I had a great idea. Why not use my GS3 to wifi tether to my old Vibrant and stream audio / video through the wireless connection. So I rooted the phone, downloaded wifi tether from the play store (free) and set up my vibrant to connect to my GS3 through tether. In order to share files, I downloaded bubbleupnp (free with limitations) from the play store and now I can play files from my GS3, which wirelessly plays on my vibrant, which outputs to my RCA inputs. Its kind of a roundabout way of doing what I wanted but it works well. I can keep my vibrant in my car hooked up to a car charger, while my GS3 can be docked and charging as well. The only thing I have to do is remember to turn on my wifi tether when I get in my car and my vibrant connects automatically. And the best part is that if I play video or music from my GS3 library, I'm not downloading anything so no data usage from the wifi tether. Pretty awesome. I imagine this will work with any two DLNA devices so long as one of them has video out through rca or and older adapter. Hope this helps someone out.
And do you have two cellphones batteries to drain... have you connected 2 car chargers or anything like that? Your car panel will be with too many cables, no?
tacomaguy20 said:
I want to output my video to my dvd screen in my car. My input for the aux of the dvd player are RCA. Previously I was using a 3.5mm jack to output to RCA and this worked with my old phone (t mobile vibrant). Is there anyway to output the HDMI on this phone to rca inputs? Any help is appreciated. I posted in this thread because I'm assuming the fix would be an accessory. Thanks.
Click to expand...
Click to collapse
SkzBR said:
And do you have two cellphones batteries to drain... have you connected 2 car chargers or anything like that? Your car panel will be with too many cables, no?
Click to expand...
Click to collapse
Well I do have two car chargers, One in front and one in the back. I do need to get a good mount that has power attached. I've seen the ones that plug into the lighter and they have the power built right in so that will eliminate one cable and give me a nice dock for my GS3. Not sure what I'll do with the vibrant but I won't need to access it very much so might mount it to the inside of my armrest or something. I don't think the cables will really be a problem though. I'm just happy I got it working again.
OK. So 2 years ago I saw a thread on the Nexus 7 tablet forums where someone essentially turn it into a car deck. At the time it was complicated, convoluted and buggy to say the least. Since then its been a thought exercise to make this work. How I wanted it to work. This is what I wanted:
Simple plug&play. One USB connection to carry high quality audio out from the device while still allowing it to charge. This is the most difficult. On the Nexus 7 it required a special kernel and plus the accessories had to be connected in the right sequence. Not exactly the one action set up I was going for.
The easy way to accomplish this was to use a standard USB charger and then use the headphone jack to send audio to the Aux input of the stereo. Great in theory! However the phones/tablets I have used always allowed alternator whine into the sound. Not ideal either.
Third common way is to use bluetooth audio. My Pioneer deck does support this. But we all know the quality of the sound from this is OK at best. Play some ripping guitar or something melodic and you can really hear the compression (watery, slurred "S"s sound). Not good enough for me.
Now when I had first read about this concept I started accumulating various adapters and parts to play with. First was a Behringer 202 External DAC. Its low cost but had decent reviews. Perfect for my installation. Plus the added benefit of several output format options, so a deck with an optical input could also be used if yours has one. With this I got a simple USB OTG with the Micro USB charger Y-cable. The one that has a standard female USB, the charger connection and the one to the device. Now this whole thing never worked properly. I ended up using the OTG cable with the DAC, but on my home stereo where I could place a Qi Pad under the Nexus (and my S4 before) to charge and the DAC for audio. At least I was using what I spent money on. Just not the way I wanted.
Fast forward to yesterday morning. I have had my Nexus 5 for a few months but had not tried this set up. The fussing with kernels on other devices and units over the years had me giving up. But I figured why not try with the DAC and standard charger connected (they were just sitting there after all). Low and behold it worked! And I mean perfectly! It was a big light had been turned on and the world was beautiful! Then I tried my M8 and it failed......but the Nexus 5 for the win! Oh, and even when connected to the power the DAC turned off when I disconnected the phone. So it shouldn't drain my truck's battery (though I parked on a hill tonight just in case!).
So! Here is my car installation that I was finally able to complete. I have included photos of the installation and the parts I used. It's in a list format that I hope follows the pictures. it will take me a post or three to get it all in! So bear with me.
Ingredients:
Nexus 5 (I am running Liquid Smooth for my ROM, I have not tested it on other ROMs at the time of this post).
External DAC. Like the Behringer 202 I used, but I would assume most would work.
USB OTG and Charging Cable
RCA to 3.5mm headset adapter.
Standard car charger. I have a Belkin 1A one that works like a charm. In theory you could use the USB on the stereo if included, but you may not charge reliably.
Standard USB to Micro USB cable
iBolt xDockPro for the HTC. This is optional, but i like the iBolt and their right angled USB is the right way for the Nexus. Which made the set up cleaner.
Car Home Ultra from the Play Store
So. The first photo shows all the stuff I used (minus the car deck and truck).
Second you will see I am in fact using the HTC Dock
Next is the DAC I used
Followed by the adapter cable
The the RCA adapter
The before picture. The sticky pad for the mount was there cause I was already using my iBolt with just a charger tucked in.
This one you will see I have taken the y-cable and connected it to the iBolt adapter. My dash had the room for this, you may need an extension as the y-cable is really short!
Dash is coming apart!
To be continued (I can only post so many pics at once!
Part Deux!
So the next photo shows my deck's AUX input. Now I bought this unit because it had a rear jack. So connected the headphone plug into the AUX jack.
These next four pictures are just to show which power supply I used and how the USB cable is run up to the y-adapter. Now it would be possible to use your stereos USB for power if equiped. I didn't for two reasons. First, the phone/stereo may think your connecting a flash drive (both unit could be trying to be the "host"). Second the stereo may not put out enough amperage to run both the phone and the connected DAC. So I just went with the separate supply. Plus its easy to disconnect it should I need too.
This is me connecting the DAC. Now I wanted to show this particular step as you can see the power light is NOT lit even when connected to vehicle power.
RCA cable is now connected to the DAC.
The set up all buttoned up!
To be continued.....
Trio!
This post is more about the proof of concept and the Car home Setup. Here it is!
Basically once the hardware was all set (1 & 2) I fired it up, and used Play Music (and others) making sure Bluetooth was NOT paired yet. Sounds AWESOME! Makes a night and day difference! Then I paired it for hands free while making sure the media wasn't connecting. Now went into Car Home Ultra and just set it to launch with the my stereo's bluetooth connection. My only next goal I need to finish is to get an NFC tag to control Bluetooth on the iBolt. Car Home is set to turn WiFi off automatically when its running, but my set up is reliant on BT running all the time (or have me remember to turn it on/off, but defeats my plug'n'play concept).
That's the gist of it. If you would like more details or suggestions please let me know!
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
daniel_loft said:
So it's not just my Ford Fiesta that sends lots of noise to the charger? I am a little relieved, but it sucks to find out that this is somehow a "standard"...
Nice setup there!
Click to expand...
Click to collapse
There is a fix. They make something called a "ground loop isolator" that can usually fix the noise generated from you alternator. Here is an example, quick google search brought it up. http://www.amazon.com/PAC-SNI-1-3-5..._sim_pc_3?ie=UTF8&refRID=1FEVW0RPFQ5W3V742E6G
You could put a more temporary/portable set up like mine, wouldn't be hard if your still having issues. Put all the parts together, stuff it all in an old cassette or floppy disk case with a few holes for the cables to stick out of.
Yeah, now the challenge is to find ways to make it work on more devices. It's really unfortunate that the M8 doesn't on Sense based ROMs (I plan on trying a GPE ROM in a few days to see if that makes a difference).
And I may now invest in a proper proclip mount so it's not up on the dash like that. But it works like a hot damn as is for now. Even with LTE on, display always on and streaming audio it charges, though pretty slow. Still. Better than not at all. And I can always turn the screen off if I wanted to give it more juice.
I have my Nexus 5 w/o the case using an iBolt mount I already had and a cheap qi charger and works great.
Nice Setup... I was actually looking for something like this. Thanks for posting
There are a lot of microUSB to USB + aux splitters on amazon for the Samsung Galaxy phones. Would these have worked all the same? Or does the Nexus 5 not have a docking capability that would sense the plug?
For those that don't know BlackBerry sells a blutooth adapter that uses power from the usb charging port on your after market stereo. I use it on mine. This thing is crazy small I hide it in the gap behind my stereo and the reception is good you have around a 10ft radius depending on where you hid your dongle.
http://shop.crackberry.com/blackberry-music-gateway/9A172A11438.htm
Nice I see you have a Colorado. I have a Nexus 7 in mine. I can say that after hours and days of troubleshooting ground noise I could not get rid of it. I had to use a ground loop isolator
Sent from my Nexus 5 using XDA Free mobile app