Related
I tried a ROM update today (Magnolia) and my phone is now seriously slow (including SpeedTest which shows about 50Kbps download speed). I attempted to reinstall the same ROM and to restore a Nandroid (neither of which has helped). I did every wipe present in CWM v2.5.1.2 (I know v3.x.x.x is not a good wiper) and in HBOOT, also all to no avail.
It is possible that the ROM is focused on carefully updating itself rather than completely overwriting.
Does anyone have a recommendation as to the best way to really ensure that no old runaway processes are surviving the flashes (ROM or Nandroid)? I am wondering if flashing another ROM would do it (it wouldn't try to update), but am very open to suggestions.
Thanks!
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Dont use rom manager to install go into recovery. Do a factory reset twice, then goto mounts and storage and format manually, data, cache, system, boot. Do that twice or more and youre super wiped as you put it. But as far as magnolia goes...did you make sure that you dl'd the flashover and not the whole rom?
Sent from my ADR6300 using XDA App
Thanks
Pete - Thanks. I never use RomManager to do ANYTHING (and remain surprised that people do). I do factory reset and wipe in CWM but never formatted system; which I just posted in the Magnolia forum as being what I thought is causing all the trouble. At least this lets me know how to manually do it. Thanks
1107963 said:
I had the same problem when I would install a rom with the CW 3.0.0.8 and it will just update the current rom, and not do a full wipe like I just to get before with the CW 2.x.x.x what I have done to get a clean install is this...
- I dont use the Rom Manager no more to update...
- Boot into Recovery and do the Following before you install a new Rom..
1-) Wipe Data/ Factory Reset
2-) Wipe Cache Partition
3-) Install the Rom .Zip with CW
Thats how I have done it before hope it helps...
Click to expand...
Click to collapse
Building on this- I do EVERYTHING from recovery. In addition to the steps listed I also go to "mounts and storage" and wipe /system, /data, /cache, and /boot. Eradicate!
Sent from my ADR6300 using XDA Premium App
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
johnchad14 said:
I gave out a loud guffah when reading this thread title. Maybe stuff's just funnier before having coffee.
Click to expand...
Click to collapse
Right? Super Charmin came to mind right away.
Sent from my ADR6300 using XDA App
I am not new to this, I have experience with rooting htc and samsung devices. I have also searched, and searched, and searched with no luck on this.
However, I am stumped on this phone. I am using ODIN to flash the S/U script, I can gain root, install CWM and install it. I can load a ROM but one of 2 things happen: when I boot it up I get stuck in a boot loop, or it won't even install in the recovery.
I have a few questions / statements:
WHY am I getting stuck in this boot loop?
I am wiping cache/dalvik before I install the new ROM.
I am installing the ROM on the SD card vs the internal memory, is that why?
I got stuck 3 times in the boot loop, and I have had to use ODIN to flash my phone back to stock to start over.
Thanks in advance for the help.
If you have searched, and searched, and searched you would have realized that this is not development related.
for someone who's been around then, you should first off know that this belongs in q&a, not development.
that being said, which recovery are you using? i don't think that's your problem but a little more info would be helpful. also, which rom are you trying to use? when you're wiping, try using this, it'll wipe everything necessary. you only mentioned wiping your cache's so maybe that's it? in any case, flash the file i linked, then your rom. check the md5 on it and make sure it's a match. after you reboot, let your phone sit for 10 minutes and hopefully all will be well.
http://www.youtube.com/watch?v=JmvCpR45LKA
Mercuri82 said:
I am not new to this, I have experience with rooting htc and samsung devices. I have also searched, and searched, and searched with no luck on this.
However, I am stumped on this phone. I am using ODIN to flash the S/U script, I can gain root, install CWM and install it. I can load a ROM but one of 2 things happen: when I boot it up I get stuck in a boot loop, or it won't even install in the recovery.
I have a few questions / statements:
WHY am I getting stuck in this boot loop?
I am wiping cache/dalvik before I install the new ROM.
I am installing the ROM on the SD card vs the internal memory, is that why?
I got stuck 3 times in the boot loop, and I have had to use ODIN to flash my phone back to stock to start over.
Thanks in advance for the help.
Click to expand...
Click to collapse
If you look in the darkside rom thread, and some of the other rom threads, you will see three recommended wipes: darkside super, kernel and darkside cache. I would suggest you do all three.
Sent from my SGH-T989 using xda premium
Here is a big problem as well. You wipe cache and dalvik AFTER you flash the rom. I usually do it before as well but always after. That's like wiping before you **** and not cleaning up after
Sent from my SGH-T989 using XDA
odin version
jabberbox said:
http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I used an old version I couldn't get the latest one to work. But it wouldn't even load for me. It been a min sence ive used odin. But my replacement phone is at the house I'll pm you the steps I'll take. Everyone else try to be nice even if you think the question is stupid. Try to show some love
sorry i read wrong. i thought you couldnt gain root. as far as boot loops follow darksides wipe method it work. as far as my replacement phone rooted after first boot. my usb port is broke on my old phone
anyone know how to get back to stock with out it?
sence we are asking crazy ass questions?
dam auto correct
Questions go in the Q&A section
To those of you who helped by answering my question, thank you.
To those of you who told me I posted in the wrong sub section, get over yourself. Especially the guy with 13 posts.
I am wiping cache/dalvik before and after.
I am using CWM from the market, so it should be the newest version.
Ill check out the darkside thread.
You really don't need to wipe dalvik cache after a fresh rom install, unless you didn't delete the data partition (wipe data). And you certainly don't need to do it before and after.
Wiping cache and dalvik cache is really only useful if you make changes to the system but don't want to format the data. This includes flashing themes, and other enhancements, because most of them are replacing system files. On your first boot the dalvik cache gets built. (This is why a lot of devs recommend letting it sit for a bit before using it, it's giving it time to build the cache.)
The reason they tell you to wipe dalvik cache is let's say you're installing a theme, and it replaces systemui.apk and framework-res.apk, located in the system partition. The dalvik cache is already built for these files, so in some cases if you don't wipe the cache you'll boot loop. When you wipe dalvik, you are letting it be rebuilt with the current files.
Also, while we're on the subject, another misconception I see alot of, you don't need to wipe the dalvik cache after you wipe data. Dalvik cache is located on the data partition, it's a folder there. If you wipe the data partition, you've already removed it. (Not to be confused with cache partition, which is used for different purposes. That is it's own partition.)
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
I tried installing a rom last week on my Galaxy Note II (Rogers), i followed orders (this isn't my first time flashing roms), and it has been stuck in a constant boot loop.
I've tried everything, wiping cache, factory reset, tried to flash different roms, etc....
I am a mac user (which means Odin isn't an option).
If you guys have any suggestions on how to fix this it would be greatly appreciated.
What rom were you on and what rom were you trying to flash originally? Also what recovery are you using? Need a little more info because usually wiping caches dies the trick. Provide a link to the rom you were trying to flash of your can.
jethro650 said:
What rom were you on and what rom were you trying to flash originally? Also what recovery are you using? Need a little more info because usually wiping caches dies the trick. Provide a link to the rom you were trying to flash of your can.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1986893
This is the rom, i was using CMW to flash it, then it made me switch to TWRP (think its called that)......hope that helps.
Sorry I can't be of more help aside of redoing the installation of your recovery and redownloading the rom ( bad downloads happen) and making sure you do all the wipes (cache, dalvik cache and factory reset). If none of that works I'm sure someone more knowledgable than myself will chime in.
I've never run into a bootloop problem myself, but this might help you out :
hxxp://galaxynote2root.com/galaxy-note-2-tutorials/how-to-unrootunbrick-galaxy-note-2-with-stock-firmware/
Good luck
Have you had any luck with this yet? I've been unable to get my phone back up.
QuantumPSI said:
Have you had any luck with this yet? I've been unable to get my phone back up.
Click to expand...
Click to collapse
No luck, but then again i am a Mac user, so its a little more difficult for me to solve this problem.
Anirchy said:
I tried installing a rom last week on my Galaxy Note II (Rogers), i followed orders (this isn't my first time flashing roms), and it has been stuck in a constant boot loop.
I've tried everything, wiping cache, factory reset, tried to flash different roms, etc....
I am a mac user (which means Odin isn't an option).
If you guys have any suggestions on how to fix this it would be greatly appreciated.
Click to expand...
Click to collapse
Put another ROM on an sdcard. Take your battery out then press the button combo for recovery mode before you slip your battery back in. Then it'll force download mode. Reflash the new ROM after full wiping and you should be good.
Sent from my SGH-I317 using xda premium
Definitely a bad ROM. Run a MD5 checker against it prior to copying to the SD card. Note: your SD card could be the culprit.
If you have a recovery installed, ensure you WIPE everything, Fix permissions (i'm on CWM) and reflash the modem and carrier files POST rom install.
I experienced my first boot loop yesterday but I was able to recover from it thanks to a little common sense and patience. :fingers-crossed:
Good luck!
first of all, don't freak out, a bootloop isn't the end of the world. Sounds like it was a bad flash.
ppl above have obviously told you to wipe caches, and all that stuff and if it hasn't worked then you are still down and out.
I would suggest you get yourself into recovery - not going to explain that here as you said you were able to flash other roms and it didn't work and try flashing your nand backup - hopefully you have a nice clean backup from before you flashed. if so, clear caches, etc and then try flashing it it should be back to at least working.
your nand backup will have all your stuff in it as you would have had to backup from recovery, which means you'll at least still be rooted. you can then go ahead and get another rom - check the md5 and flash it
[Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stopped"
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
nwjimmy said:
I have a Galaxy s3 and I have twrp installed. And so far I have tried flashing 4 or 5 different custom roms and every time I end up getting this message "Unfortunately setup wizard has stopped" and then some message about ".com.goolge gpapps has stopped".
I am flashing the rom's and gapps from trwp. And I get the success comment after both the rom and gapps flash. I then restart/reboot and the new rom's custom boot animation comes up, like with cm10 the blue clockwork logo spins, and then after 10 or 20 seconds I get the two error messages and thats its. And when I flashed liquid smooth, I got the Liquid Smooth boot animation.as well and the the two messages. I eventually get my phone tuned off and I get it booted back into twrp and restore my backup to my stock rooted setup which is what I currently have running and so far is the only thing I can get to boot up. I have tried cm10 nightlies from the past week and cm10 stable and liquidsmooth, and a couple others. I downloaded several from goo.manager but i most recently tried a cm nightly i downloaded directly from clockworks site.
Any Idea's. I have seen a couple other threads on other devices with a similar problem but most seemed to have the wrong gapps, and I am using the most current gapps, i even downloaded it from multiple sources to double check.
Does the fact my phone is android 4,1,1 and most these roms are 4.1.2 or newer matter? And if so what is the fix?
Click to expand...
Click to collapse
Are you wiping system and data before flashing? This is most likely your issue.
zelendel said:
Are you wiping system and data before flashing? This is most likely your issue.
Click to expand...
Click to collapse
yes, cache and dalvik, and a factory reset.
nwjimmy said:
yes, cache and dalvik, and a factory reset.
Click to expand...
Click to collapse
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
zelendel said:
Ok what you have to try is this.
Boot into recovery and wipe system and data (removes settings so you will need to reset up everything) They wipe delvic cache and normal cache, then flash the rom and the proper gapps for the rom.
Click to expand...
Click to collapse
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
nwjimmy said:
On the wipe screen in twrp there is a system option but for data it says format data? Do I need to wipe "system" and "format data"? or does the wipe system option take care of what i need to do? If I need to also select "format data" which do I do first ? format data or system wipe? will i need to wipe cache or dalvik as well, or will those be wiped in the system wipe? Sorry for all the ?'s I am a real noob at all of this.
Click to expand...
Click to collapse
No wiping the system doesnt format the data partition. Wipe system then format the data and then wipe the caches and then flash the rom.
Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Re: [Q] Help? I get this when flashing a new rom "Unfortunately setup wizard has stop
matt_schieman said:
Sounds like your flashing the wrong version of gapps.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Agreed.
Double check your gapps and make sure uts the right version
sent from my 1920 overclocked note 2 running jedi xp12
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
nwjimmy said:
What gapps should I be using ? I hav gapps jb -20121011. I havnt wiped the additional areas yet either but thats because I want to make sure im installing the correct zip files
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Most rom threads have a download link to the gapps that work with the version of android that specific rom is on. Look in the rom thread for the one you're currently running. There are different gapps for each android version (4, 4.1, 4.2)
I have that same problem too
I was trying to install new roms for my phone i tried liquid smooth and avatar and CM 10. I also tried install a new kernel and also different recoveries but nothing seems to work. I never "dirty" flashed and i use the right gapps. Someone please help me here i hate stock roms!
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't work.
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
fig03 said:
xantechie said:
No matter what Gapps version I've tried I still get this same error. This occurred after trying out the Dark ROM modeled after CM11, but now no matter what ROM I try, this error still occurs. The only time I was ever able to get passed it was using a backup, but that has mysteriously gone AWOL. With that in mind, has anyone actually figured this out? Is there anyone with any USEFUL input? So far all I'm seeing is a bunch of suggestions that don't
Is your recovery updated to the latest version? Do the roms you are trying support the recovery you are using?
Click to expand...
Click to collapse
That's a good point. You should be on TWRP 2.7.0.0 that's the latest version of that recovery.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, but it constantly froze, tried to reset, stuck with the same issue. Never used TWRP, so if someone could actually point me in the right direction, that'd actually be helpful.
xantechie said:
I use the latest CWM. I'm a creature of habit. The first Samsung I ever put a custom ROM on was done with CWM, so I stick with it. I finally got it to go, though...it doesn't really look the way I remember it last it worked, but it's had the issue so long, I forget what it actually looked like before.
Click to expand...
Click to collapse
I have no idea how to use TWRP...it only lists a .img file and no instructions on how to use it. zip files can be used from the bootloader or recovery. WTF am I supposed to do with an .img file. And it can't be to use the terminal emulator because to do that I would have to be able to get passed the Setup Wizard...which is the issue.
I finally figured it out with CWM. Thankfully. The phone would've went flying otherwise.
If anyone else stumbles upon this thread (so they can find the answer for CWM also), you have to format the device from the CWM Recovery to get rid of the crap that is blocking it. I did the following:
Once in CWM Recovery, Remove your SD card to avoid formatting it by accident.
Use the Volume Key to scroll to "mounts and storage".
Format all existing options (this is why the SD needed to be removed); this will blank out the phone's system which was causing the Setup issue to begin with.
Put your SD card with the ROM to be installed back into the phone.
Follow the guide as normal after this (install ROM, then reboot, then KK_gapps, then wipe the two caches, then reboot.)