Related
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
I remember a thread like this being made a while ago...if you're on a computer, just search and you should find it. I can't post a link, but I think the guy in that thread replaced it succesfully.
There was also alotta chatter about insurance covering it
Sent from my SPH-D700 using XDA App
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technical-competitive-analysis/resources/recent-teardowns/2010/09/teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
DiGi760 said:
I watched someone else take mine apart. There are an awful lot of little screws, but you can definitely seperate the case, the screen, and the actual guts in about 10 or 15 minutes.
Click to expand...
Click to collapse
The question then is can you get it back together ;-)
Sent from my ext4 Epic 4G running Bonsai4all 1.1.3!
sauron0101 said:
Here's a tear down of the Epic 4G:
http://www.chipworks.com/en/technic.../teardown-of-the-samsung-epic-4g-smart-phone/
Try asking a repair technician. The truth is, body repairs can be quite pricey - to the point where you might as well be getting a new phone in many cases.
Click to expand...
Click to collapse
I had TEP with my BB curve and I smashed it [was REALLLLLLY angry at my gf...she wasn't worth the BB :'( ] and I took it to a corporate store, and he fixed the screen in front of my face and I walked right out lol but that was a couple years ago
Sent from my SPH-D700 using XDA App
The phone still works, I just wouldn't want to look at pictures or watch videos on it since the color is all messed up. It's been about 2 weeks since the accident and it's still going! I just want to study this just for reference just in case it does go out. The replacement cost $60 on ebay, so I'd definitely do that, especially when I don't have insurance with Sprint (I think it still costs more than DIY) and I don't think Samsung fixes water damage through its warranty.
Oh well.
Thanks for the link! I'll check it out!
being a technician at an indirect sprint store, its a pain in the ass to separate the LED screen and the glass itself. the very best way to do it is either go to a 3rd party sprint store that has a full service(repair) center and either have them do an exchange if the tech is a nice guy (considering its water damage) or replace the part (which would be free as long as you have TEP). PM me with more questions if you have them
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
br//0k3/n said:
Yeah, I've done it at least 20-30 times now. It's EXTREMELY difficult to get the lcd out and you'll more than likely end up breaking your phone.
Click to expand...
Click to collapse
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
flawlessbmxr said:
Yea, you're definitely right about the LED itself. It's close to paper thin and made of a glass type material. it will break if you try to get it out. it's glued pretty good.
Click to expand...
Click to collapse
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
just to chim,e in on this ancient thread. i used a guitar pick instead of a flat head. i thought a metal screwdriver would scuff and mar up the plastic cover over the board.
Another protip: the notches on the second to last plastic cover serve a purpose -getting that back half to snap onto the phone is a huge pain in the ass, - i put a flathead into the slits and pushed down and snap snap snap snap motherboard cover was back in and my battery case didn't bulge.
kzn said:
Has anyone done it before? There is a video on youtube, but it only goes as far as the keyboard. I'm looking to get to the LCD to fix/replace it because of discoloration from water damage. Anyone thinks it's possible?
Click to expand...
Click to collapse
I've replaced my LED screen before by myself, took a few hours. This video helped me.
http://www.youtube.com/watch?v=IeO89VGAPuU
zvonkorp said:
I took mine apart, lots of screws. Honestly the hardest part was removing the back cover that goes over the motherboard. I used a very small flathead to pry up underneath where the little notches are on the side. There's a lot of clip points and 2 of them at the battery are very hard to get off. Once that's off, the rest is cake. Separating the screen was a non-issue, as mine was already broken/cracked.
Click to expand...
Click to collapse
Is there a water sensor inside the phone, I've always wondered if the battery was the only place
Sent from my SPH-D700 using Tapatalk
I dropped my white galaxy s2 yesterday and it has a semi steep dent on it. Luckily everything is working fine. Anyone know I can get a replacement of the aluminum bumper that surrounds the side of the phone? I've done a a few search and couldn't find it.
Hi Something,
Unfortunately a part like this is usually fused with the front housing assembly on the device. A quick google search yielded the following result...
globaldirectparts.com/Samsung-Galaxy-S-II-SGH-T989-Front-Housing-p/smsng6110920.htm
You'd have to replace the entire front housing assembly on the device...not the easiest part swap, but still entirely doable.
Hope this helps!
Cheers,
Nick
Spork McBork said:
Hi Something,
Unfortunately a part like this is usually fused with the front housing assembly on the device. A quick google search yielded the following result...
globaldirectparts.com/Samsung-Galaxy-S-II-SGH-T989-Front-Housing-p/smsng6110920.htm
You'd have to replace the entire front housing assembly on the device...not the easiest part swap, but still entirely doable.
Hope this helps!
Cheers,
Nick
Click to expand...
Click to collapse
If you do this, looks like you'll have a black T989
Get a case and cover it up, best and easiest option.
That really sucks. I dropped my also on wood floor and cracked the left corner.Great phone but too sensitive. I need a light but strong case.
BRODZ2020 said:
I need a light but strong case.
Click to expand...
Click to collapse
Any case that provides reasonable protection for a phone is not going to be 'light' or thin. There's a reason why they add bulk and it is to absorb the kinetic energy that would otherwise damage your phone.
Those guys (GlobalDirect) won't ship to an individual, they only deal with businesses.
SheCo said:
Those guys (GlobalDirect) won't ship to an individual, they only deal with businesses.
Click to expand...
Click to collapse
Did you try to enter your social for the business ID ?
I had a similar incident happen while out partying for few days straight. A rugged fall onto some ragged asphalt made for some bezel splitting/pitting. I called T-mobile because my phone was "acting weird" and they exchanged it for me no hassles.
I also scratched the hell out of the bumper with a 1 inch drop. I tried using my PHP from tmobile, I was going to use water damage as an excuse but they want to charge me $130 bucks just going to get a case
Is that actually aluminum I thought it was just aluminum colored, well if it is aluminum, you can always try a really, really fine sandpaper ex.1000,1500,2000 even 5000, I had a HTC Sensation (Made Chrome), and I dropped a few times, had chips and scratches which I fixed with sandpaper and 1000 to 2000+Blue Magic. Hope this can help but remember try at your own risk.
I looked into replacing this part when I dropped and dented my phone. Unfortunately, to replace it you have to replace the entire front half of the phone. And unfortunately, the screen is adhered in place. From what I found, you need to have the proper tools (uses heat, I believe) to release the screen, and then reapply it to the new housing. I cracked my OLED while attempting this. Luckily I was able to put it back together and get it replaced under the insurance. Bought myself a case immediately upon receiving the new phone.
Hi guys,
I have just broken my Dinc2's glass screen. The underlying LCD screen is still functional and the touch screen works. So, I am guessing that I only broke the glass on the top of the screen... I uploaded pics to make it clear.
The casing near the USB port got bent some time back when I went kayaking... And I think that is where the screen cracked significantly when I dropped the phone.
I can still use the touchscreen and there are no discoloration on the LCD. So, can you guys suggest to me what Screen replacement product I need to buy online and (preferably) give me a link for said product and a How to repair guide. Plus, is this process easy? As in if I spend a few hours carefully following the steps to repair, will I succeed?? Moreover, can I replace the metal casing as well?
Thanks for the help gang! I really need to get my phone back to 100% working condition as I don't have an upgrade available till April '13 and I have cancelled my phone's insurance recently!
EDIT: Does this product help? http://www.amazon.com/gp/product/B0057OO9OC/
http://www.repairsuniverse.com/htc-droid-incredible-2-screen-replacements-repair-parts.html
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
So I have dust under my screen even though my phone is completely original and never been dropped. Do you think it's worth taking apart, cleaning out, and replacing the adhesive? How long do you think it would take, and what is the likelihood of doing more damage to the phone?
Truckin'Ain't4Sissies said:
I just replaced my digitizer for $11 on eBay.
It's an HTC one too (no "Verizon" branding, just "HTC".
It's for an Incredible S, came out of SoCal.
EDIT:
Here's the Digitizer
http://goo.gl/w7Vr0 $12.77
Here's the adhesive (sticker) that HAS to be replaced or it'll lift-up and will allow dust inside. Thus driving you F'ING INSANE. Mine is on order
http://goo.gl/34ylh
-Truckin-
Click to expand...
Click to collapse
I bought the following on amazon:
http://www.amazon.com/gp/product/B005GIUHDQ
http://www.amazon.com/gp/product/B0057OO9OC
http://www.amazon.com/gp/product/B002EXHR1Q
I should have probably waited for more replies, like yours, here to get a better product link. Anyway, I guess I bought all the needed parts. I hope I get good quality material and I can get going with the repair... Do you think that they are good? The digitizer and tools didn't ship yet, so I can try and cancel and buy the one from ebay...
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Dermen said:
I actually just finished doing this a few hours ago. It does take some time to do it but if you have patience you can do it
You have to remove the LCD to remove the digitizer, so you will have all the parts out of the body of the phone. It is easier if you replace the body because it comes with new adhesive already perfectly cut and installed. If you reuse the old one you will have to scrape all the old adhesive off, then cut new adhesive. They are also available in red/silver/black so you can change colors.
Click to expand...
Click to collapse
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
litetaker said:
When you say replacing the body, are you referring to the front housing/bezel? That is this: http://www.repairsuniverse.com/htc-droid-incredible-2-front-housing-bezel-replacement.html
If so, where did you buy it, as I want a reliable and reasonably priced product online. Thanks a lot for the help, btw!
Click to expand...
Click to collapse
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Parts arrived. Links to tutorials PLEASE!
Dermen said:
That is what I was referring to as the body, since all the parts attach to it. I actually got an entire new housing, came with the bezel, the middle part, and a new battery cover since my battery cover was beat up and I was changing colors. The middle part I didn't need but it was cheaper to buy all 3 parts than just 2.
I got it on ebay. The Incredible 2 and the Incredible S housing parts are interchangeable. I ended up getting S parts because they were cheaper. Most of the ebay sellers are in China so shipping takes 1-2 weeks depending on the seller. Repairsuniverse is good if you want it fast, I ordered from them once and got the part in 2 days.
Click to expand...
Click to collapse
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
prototype7 said:
1. Take it apart.
2. Put it together with new parts.
3. ???
4. Profit.
Click to expand...
Click to collapse
Thanks, captain obvious!
I wanted to know if there is a detailed how to. Anyway, managed to take it apart. All guides end at taking it apart and say, "well, now you know how to dissemble it, just go in reverse and assemble it. Well. I wish they don't do that and show me through the reverse just to avoid mistakes. I remember having to redo IKEA furniture due to missing a few parts. Don't wanna do this messy procedure and realize I forgot a button or worst still putting the screen on!
Anyway, I am a grad student with a bachelors in Engineering... I should be ashamed if I can't do this! :silly:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Dermen said:
repairsuniverse has a guide on youtube for replacing the digitizer. I found it easy to follow. Only difference is when you put it back together put the parts in the new body. You will also have to pull the speaker out of the old body and put it in the new. It is held in by glue, heat it with a hairdryer/heatgun and it comes out pretty easily. You might need to use some new adhesive on the speaker, I was able to pull the old adhesive out of the body in one piece using a hairdryer and some tweezers.
Click to expand...
Click to collapse
I am 100% done with the repair. But there are a few issues. The Vibrator motor seems to be not working. Then, the Digitizer I bought doesn't have a hole for the front facing camera! That is not a major setback as I rarely use it and I have a tablet and a PC to skype chat with... But it is sad that a feature is missing.
The big issue is the vibrator not working. I didn't mangle it and put it back in place as I am supposed to. Finally, I have 1 or 2 small dust particles under the screen and that is ok. I couldn't remove all the dust and it is a miracle I managed to get it that clean. Finally I seem to have a slight green tint/screen bleed at top left corner. I didn't have that before and I didn't distort the LCD while replacing. Is it due to a smudge on the LCD there? I suppose it is a minor issue and not something that will amplify as I have a Transformer prime that has screen bleeds and it is apparently because the screws are too tight.. So may be I tightened something too much? Anyway, if it doesn't deteriorate I am ok, as it is a very, very minor problem.
So, bottom line: Main problems > (1) No FFC (due to improper digitizer) -> I don't intend to fix it. (2) Vibrator motor not working.
Can someone help me with 2?
I fricking fixed it! I have WORK to do and I spent about 4 hrs fixing my phone!!! I'm kinda screwed for tomorrow! At least now my phone works...
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Dermen said:
That is odd it didn't have a spot for the front camera. I replaced my digitizer and it has a clear spot for it but it is not even close to centered. It actually looks like it would obstruct the camera but it doesn't. If you take it apart again for some reason you can scrape the black off the back so it is clear. However, it is very hard to do that and make it look decent.
Getting it perfect with no dust between the lcd and digitizer is very very hard to do. The first phone I did I actually took it apart again because there not only was dust but smudges on the other side of the digitizer. As for the bleeding I wouldn't think you could cause it from pressure in the inc2 because the lcd and digitizer are just held on the front by adhesive. The LCD has adhesive around the entire edge of it, I don't know if that also blocks light from the edges but if it does and there is a little bit missing maybe it is the cause.
Click to expand...
Click to collapse
The following are the images of my fixed and "pimped" Dinc2.
https://www.dropbox.com/s/beop9oqvn6qo9p5/2012-09-25 00.23.03.jpg
https://www.dropbox.com/s/qh62damm82z0qmu/2012-09-25 00.22.32.jpg
Is the two tone color combination looking sweet, or should I change the back to red as well? I have a spare black back cover. If anyone has a spare red back cover, I can trade!
Plus, the "smudge/screen bleed" at the top left edge is seen in this pic:
https://www.dropbox.com/s/illeve11tomyrtw/2012-09-25 00.54.23.jpg (The black spot on the middle of the left side is a dust spec!)
Close up: https://www.dropbox.com/s/9ys4r2e6xmxfhnh/2012-09-25 00.54.48.jpg
Is the smudge bad? I think it is just a smudge on the LCD and not a damage to the LCD right? In that case, I am cool, as I most likely will cause other smudges if I attempt to redo it anyway. Plus, I am kinda bummed out about the lack of FFC, but I hardly use it and the whole process of removing the screen is SOOO tedious (and I don't have a heat gun, so had to put my phone a feet above a gas burner! ) and it was so painful and stomach wrenching to safely remove the LCD/digitizer that I don't wish to do it again to repair the FFC...
So, what do ya say?
I think the two tone looks good since the red phones have all black accents. I thought it was weird that the speaker on the red phone is silver, while all the other accents are black.
There seems to be a problem with the adhesive. The digitizer is raised by about 1 millimeter at the top while it is attached better at the bottom. I think it is because I had an additional horizontal strip of adhesive at the bottom to attach the digitizer to both the LCD and the buttons firmly while I didn't put such a horizontal strip at the top as I didn't see one when I dissembled it. If I put pressure on the digitizer for a while, it sets back in place for about half a day. Is this a serious problem? I don't feel like dissembling again.
litetaker said:
Hi guys, I just received all the parts. The following are what I ordered:
Housing Front for HTC Droid Incredible 2 Red Body Frame Chassis Bezel Part
Verizon HTC Droid Incredible 2 Replacement Touch Screen Digitizer Replacement Front Glass
2mm Wide Double Sided Layer Adhesive Sticky Tape Sticker
Tools for iPhone and most of phone
Now I am ready to replace the screen. Tutorials? I found some online, but would like to see what you guys followed to see if I can find simple and comprehensive tutorials!
Thanks! And wish me luck.
Click to expand...
Click to collapse
I just broke my screen and im looking to go the same route. This is a good phone to have as a back up after i get my upgrade and i dont want to get rid of it.
Anyway, did you need all those parts to successfully change your screen? I thought if you bought a new housing you would not need the adhesive tape?
I was not a happy camper when I dropped my phone at work this morning and shattered the glass around the front speaker on my vzw gnex. Digitizer and led display are fine, so I'm looking to buy a new glass panel for it. Unfortunately, all the panels I see on ebay except for two are for the gsm one, not the cdma one. I know the battery door won't fit between the two, but the glass should, right? In the pictures everything looks to be in exactly the same spot. The two for the i515 are considerably more expensive than the i9250,which is why I ask.
For the record, I did pretty good; I got my first gameboy color at 6 or 7,and being just a few months away from 21 now, this is the first mobile handheld device that I've ever broken a screen on.
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post. I would personally just recommend paying more for the i515 glass and knowing that everything will fit alright, rather than taking a chance on throwing your money away.
Sent from my Galaxy Nexus using xda premium
tristandespain said:
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post. I would personally just recommend paying more for the i515 glass and knowing that everything will fit alright, rather than taking a chance on throwing your money away.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I remember seeing that thread as well, I tried to find it, but could not.
justbecuz123 said:
I was not a happy camper when I dropped my phone at work this morning and shattered the glass around the front speaker on my vzw gnex. Digitizer and led display are fine, so I'm looking to buy a new glass panel for it. Unfortunately, all the panels I see on ebay except for two are for the gsm one, not the cdma one. I know the battery door won't fit between the two, but the glass should, right? In the pictures everything looks to be in exactly the same spot. The two for the i515 are considerably more expensive than the i9250,which is why I ask.
For the record, I did pretty good; I got my first gameboy color at 6 or 7,and being just a few months away from 21 now, this is the first mobile handheld device that I've ever broken a screen on.
Click to expand...
Click to collapse
A user was able to replace the i9250 screen with the i515 screen, but from the post, it said he ran into a whole bunch of problems and that if you don't know what you're doing, you shouldn't waste your time.
I would just play it safe and buy the screen that goes with the phone, unless you really want to save money and try it out, but you might waste money if you damage the screen during the process.
Sent from my Galaxy Nexus using xda premium
707BeastMode707 said:
I remember seeing that thread as well, I tried to find it, but could not.
A user was able to replace the i9250 screen with the i515 screen, but from the post, it said he ran into a whole bunch of problems and that if you don't know what you're doing, you shouldn't waste your time.
I would just play it safe and buy the screen that goes with the phone, unless you really want to save money and try it out, but you might waste money if you damage the screen during the process.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Are we talking about the glass or the whole display? It makes a big difference. Assuming all 3 displays are the same (i9250, L700, I515), the problem is separating the display from the frame plate. Its very difficult and you can crack it very, very easily if you try to remove it. The cheaper GN LCD's on eBay are from working units and those already have the frame plate attached to it. The only way to remove it is to use a heat gun and apply it on the top and bottom front areas (as well as the sides). The apply heat to the back frame plate to loosen up the adhesive in the mid section of the screen. Then, slowly and I mean very, very slowly try to pry it open using a thin blade. Start from the top and work your way down. You should stop if you meet too much resistance and reapply heat. Like I said its a pain in the ass and not for the timid. I got to successfully remove an LCD from a frame for a Galaxy S (i500) not too long ago, its a similar in process as the GNex
I also tried to remove a L700 LCD (cracked glass) from a frame a while back and cracked it even more. I know what I did wrong and I think I wont make that mistake again. My mistake was that I did not know the exact location of the adhesive and applied too much heat in the front. Another mistake was that I thought I could remove the front glass from the digitizer. Now I know this is almost impossible and I don't know how people can buy front lenses without using some type of special tools (a true hot air bga station for instance) or a technique that I'm not aware of.
So, that's my long rant right there. I would really appreciate if any of you can confirm that any all 3 displays are the same (i9250, l700, i515). If it is then I would dare to try it out and take some pictures in the process if all goes well.
What about the oven?
I used to be into cars, and it was popular to smoke the headlamps on Nissans. They also have a lot of glue in them, and it was recommended to put em in an oven lol.
I'm sure it would get hot enough to loosen the screen, but 400 degrees may break something else in the process...
Sent from my Galaxy Nexus using xda premium
Did anyone ever find the answer to this question? I am wondering the same thing.
skier354 said:
Did anyone ever find the answer to this question? I am wondering the same thing.
Click to expand...
Click to collapse
You can't use the i9250 screen on the i515. The battery metal thingies and the vibration thing are in different places.
skier354 said:
Did anyone ever find the answer to this question? I am wondering the same thing.
Click to expand...
Click to collapse
I have asked a bunch of eBay sellers for the last few days and have gotten mixed responses... I don't think that most of them get that I am talking about separating the display from the front case/plate. One guy told me that the digitizer/LCD combo is interchangeable from the i515 and i9250, but it won't work on the L700. One guy told me that he thought that the entire assembly including the front plate were the same between the L700 and i515. Several have said that they are model specific, but I don't think that most of them realized that I am not expecting to use the front plate from an L700 if i9250 on the i515...
It doesn't seem like Samsung would have a different display for each model. I can see the plates and cases being different because some of the other parts are different, but it seems like the LCD panel and the glass should be the same for each model. To me all of the screen connectors look the same from the pics I've seen...
Edit- I just found this online store that indicates they are the same screens http://www.globaldirectparts.com/OEM-Galaxy-Nexus-L700-LCD-Digitizer-Assembly-p/smsng6115350-qs.htm
tristandespain said:
I remember reading on here somewhere that a person tried this and ran into all sorts of problems getting it to fit correctly. I tried searching but couldn't find the post.
Click to expand...
Click to collapse
Finally found the post that you are referring to (http://forum.xda-developers.com/showthread.php?t=1780491). Sounds like he ran into problems because he tried to use the i515's front housing on the i9250. I think if he had removed the screen from the frame and re-used the frame that was original to his phone he would have been fine. It looks like it takes some heat and care to do that, but it looks do able.
I am ordering a L700 screen today and will report back on how it goes installing on my i515.
MrAreCool said:
I am ordering a L700 screen today and will report back on how it goes installing on my i515.
Click to expand...
Click to collapse
L700 screen (not including frame) worked on my i515. Details here.
Hi,
I have GT-I9250 phone and only that glass is broken. Touch and screen is fine. So if I bought this kit: http://www.ebay.com/itm/New-Outer-F...AU_MobilePhoneAccessories&hash=item5d371a5630
It's possible to change that glass or should i bought hole set? Digitizer+front cover + glass?
perusmuro said:
Hi,
I have GT-I9250 phone and only that glass is broken. Touch and screen is fine. So if I bought this kit: http://www.ebay.com/itm/New-Outer-F...AU_MobilePhoneAccessories&hash=item5d371a5630
It's possible to change that glass or should i bought hole set? Digitizer+front cover + glass?
Click to expand...
Click to collapse
I had a good LCD with broken glass that I was hoping to only replace the glass on and I ended up getting impatient and breaking the LCD. The glass is very difficult to get off. I tried heating it up and using fishing lines to separate the glass from the LCD, but I could not get very far. The glue seems to be spread over the entire surface and it does not take much prying to break the LCD.
Incidentally if the glass is shattered pretty badly you might have better luck than I did. I was able to get the broken "shards" off by heating up the screen and gently prying them off. Where I had trouble was the large section of unbroken glass. I tried to crack that glass to be able to continue to remove the shards, but I ended up breaking the LCD as well.
If you can't use the screen with the broken glass you might give it a go as you aren't really losing anything if you break it.
Good luck!
MrAreCool said:
I had a good LCD with broken glass that I was hoping to only replace the glass on and I ended up getting impatient and breaking the LCD. The glass is very difficult to get off. I tried heating it up and using fishing lines to separate the glass from the LCD, but I could not get very far. The glue seems to be spread over the entire surface and it does not take much prying to break the LCD.
Incidentally if the glass is shattered pretty badly you might have better luck than I did. I was able to get the broken "shards" off by heating up the screen and gently prying them off. Where I had trouble was the large section of unbroken glass. I tried to crack that glass to be able to continue to remove the shards, but I ended up breaking the LCD as well.
If you can't use the screen with the broken glass you might give it a go as you aren't really losing anything if you break it.
Good luck!
Click to expand...
Click to collapse
I have found few videos where that glass is possible to remove.
http://www.youtube.com/watch?v=JlfO6TUj1DQ
But I think that I would buy that whole set and change that. But what is the best place to buy that? So I can real deal.
Ok guys, just wanted to confirm that front glass for the L700 and GT-i9250 the same. And I assume that i515 as well.
I got for repair Nexus Sprint (L700) with cracked front glass but then was surprised that glass for L700 on ebay about $15 and the same glass for i9250 less then $10. Not big deal but anyway.. So I bought the glass for i9250 and it fits great as original.
Good luck!)
When the purchase of parts and mobile phones are not matched, the proposed replacement.
The question is: is it possible to change the full housing to black? I have a white SGS2 but it has scratches all over... Also that silver edge is pretty much damaged from falls.
I was browsing around and found out that there are full housings for sale, but what about the amoled screen if I want to change the phone color?
Thanks in advance!
Barretos said:
but what about the amoled screen if I want to change the phone color?
Click to expand...
Click to collapse
The screen is mounted to the frame (midsection of the casing, which is integrated with bezel) by a sticky tape -- ~1.5 mm wide all around the perimeter, and in some areas in the middle. When you buy a complete casing, it comes with the tape attached, so it's ready for you to mount the screen onto it. It will also show you where exactly the tape is located under the screen. The tricky part is do detach the screen from your old casing. Usually, it's done by heating it (carefully!) with a hot air gun, or even a hairdryer -- it will soften a glue layer and allow you to pry off the screen without cracking it. It's not that difficult, but if you are not comfortable doing it yourself, seek some help from an experienced person -- an electronics repair guy, or a seasoned DYI'er. However, keep in mind that sh*t happens, and there is still a chance to break the screen in the process, or fry it by overheating...
Thanks for the answer, kt-Froggy.
Can you give me a link to a trustworthy shop/casing?
Barretos said:
Can you give me a link to a trustworthy shop/casing?
Click to expand...
Click to collapse
I can only tell you where I bought mine... Not sure how trustworthy this source is, but it worked for me. I usually buy my stuff on Amazon. I searched for it, and ordered from this supplier (I was getting another item from them, so it was good to combine shipments). Delivered faster than promised, looked and worked as advertised, no problems with quality, so I was happy with it.
kt-Froggy said:
I can only tell you where I bought mine... Not sure how trustworthy this source is, but it worked for me. I usually buy my stuff on Amazon. I searched for it, and ordered from this supplier (I was getting another item from them, so it was good to combine shipments). Delivered faster than promised, looked and worked as advertised, no problems with quality, so I was happy with it.
Click to expand...
Click to collapse
Looks promising... There's something else I should add. I'm using Samsung's original extended 2000mAh battery, so I should also look for the extended back cover which is different from the original one.
Take a look at this: LINK