Hi,
I've tried to edit the vold.fstab on my xperia pro to swap the internal and the external sd.
On my Xperia sola I had no problems but on the Xperia pro I don't know what I have to change.
Is there anyone who can help me?
The vold.fstab looks like this:
## Vold 2.0 fstab for Mogami
#
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.4/mmc_host/mmc0 /devices/platform/msm_sdcc.4/mmc_host/mmc1
Thank you!
anyone who can help me?
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#FIXME: Swap again?
# internal sdcard
dev_mount sdcard /storage/sdcard0 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount emmc /storage/sdcard1 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
Related
Since my old thread got moved to general I will re-post here - You can delete the one in general or I can.
Kies air allows alot of stealing of UNROOTed Android files.. so take what you want from the unrooted : )
<KIES IP>:8080 - before each
LIST any directory
/ws/content/files/<PATH>?startIndex=0
i.e. /ws/content/files/etc?startIndex=0
Lists /etc and all subfolders/files
GET any file
/www/apps/KiesAir/php/ws_send_file.php?mtype=application/octet-stream&contentDisposition=attachment&file=<FILE URL ENCODED>
i.e.
/www/apps/KiesAir/php/ws_send_file.php?mtype=application/octet-stream&contentDisposition=attachment&file=%2Fetc/%2Fhosts
GETs /etc/hosts
Good luck.. oh and if you want your battery status...
/ws/system/state/battery
---------- Post added at 05:57 AM ---------- Previous post was at 05:45 AM ----------
On the GO USB is in FSTAB! WOOT! If it wasn't /dev/zero???
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
}
dev_mount sdcard /mnt/sdcard 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd auto /devices/virtual/block/cyasblkdevblk0
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/s3c_otghcd/usb
#end line ## keep this line
Moving this thread to General as it's not development, just a way to use an app to take things from an unrooted phone.
There is already a ROM dump - http://forum.xda-developers.com/showthread.php?t=1262697 - so that can be used to get the files you want/desire.
how to?
Hi everyone, my bad english. My system Miui v4. I want to play games, but insufficient memory. Example GTA III or Six Guns. I want to install external memory. But i could not. Help me please, thank you.
i try vlod, but phone was a bootloop.
that's it:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd 28 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
discard = disable
asec = disable
}
#dev_mount sdcard1 /mnt/sdcard/external_sd 1 /devices/platform/msm_sdcc.4/mmc_host/mmc2
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.4/mmc_host/mmc2
#end line ## keep this line
Click to expand...
Click to collapse
Nobody dont know? Help me please :angel:
hi its posible mount sd card as mnt/sdcard ? (now : mnt/extsdcard)
i found in file vold.fstab
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/msm_sdcc.3/mmc_host/mmc1/
it is posiblechange and after install app on sdcard
thanks for discution
She could anyone help with editing vold.fstab to exchange storage to the SD card as an internal storage? :good:
# Copyright (C) 2009 The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
## Vold 2.0 fstab for HTC Dream or Sapphire
#
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/ext_sdcard auto /devices/platform/hi_mci.0/mmc_host/mmc1
dev_mount usbotg /mnt/usb auto /devices/hisik3-usb-otg/usb1
Can't fins this file?
Where is it located?
DonCarlosis said:
Where is it located?
Click to expand...
Click to collapse
Location:
system/etc/vold.fstab
I still use ROM B116 , where you can set the internal storage , I would like to use ROM B118 , but there is the possibility to use the SD card as an internal storage is not .
Interestingly, vold.fstab is the same in the B116 and the B118
I do not understand
Hello everyone, as the title zopo zp500s own one and I would make sure that the smartphone would recognize only the micro SD memory as I read some guides on changing the file system / etc / vold.fstab but without success, some of you may give me a hand?
if you want I can also post the rom
Thanks in advance
Gianni
I write the file directly vold.fstab:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard [email protected] /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host
dev_mount sdcard2 /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard /mnt/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2
## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1