Since my old thread got moved to general I will re-post here - You can delete the one in general or I can.
Kies air allows alot of stealing of UNROOTed Android files.. so take what you want from the unrooted : )
<KIES IP>:8080 - before each
LIST any directory
/ws/content/files/<PATH>?startIndex=0
i.e. /ws/content/files/etc?startIndex=0
Lists /etc and all subfolders/files
GET any file
/www/apps/KiesAir/php/ws_send_file.php?mtype=application/octet-stream&contentDisposition=attachment&file=<FILE URL ENCODED>
i.e.
/www/apps/KiesAir/php/ws_send_file.php?mtype=application/octet-stream&contentDisposition=attachment&file=%2Fetc/%2Fhosts
GETs /etc/hosts
Good luck.. oh and if you want your battery status...
/ws/system/state/battery
---------- Post added at 05:57 AM ---------- Previous post was at 05:45 AM ----------
On the GO USB is in FSTAB! WOOT! If it wasn't /dev/zero???
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = disable
discard = enable
}
dev_mount sdcard /mnt/sdcard 11 /devices/platform/s3c-mshci.0/mmc_host/mmc0/mmc0
# external sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd auto /devices/virtual/block/cyasblkdevblk0
# otg sdcard
{
ums_path = /dev/zero
asec = disable
}
usb_mount sdcard2 /mnt/sdcard/usbStorage auto /devices/platform/s3c_otghcd/usb
#end line ## keep this line
Moving this thread to General as it's not development, just a way to use an app to take things from an unrooted phone.
There is already a ROM dump - http://forum.xda-developers.com/showthread.php?t=1262697 - so that can be used to get the files you want/desire.
how to?
Related
Hi everyone, my bad english. My system Miui v4. I want to play games, but insufficient memory. Example GTA III or Six Guns. I want to install external memory. But i could not. Help me please, thank you.
i try vlod, but phone was a bootloop.
that's it:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# sdcard mount for the P1
# internal sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun0/file
asec = enable
}
dev_mount sdcard1 /mnt/sdcard/external_sd 28 /devices/platform/msm_sdcc.2/mmc_host/mmc1
# externel sdcard
{
ums_path = /sys/devices/platform/usb_mass_storage/lun1/file
discard = disable
asec = disable
}
#dev_mount sdcard1 /mnt/sdcard/external_sd 1 /devices/platform/msm_sdcc.4/mmc_host/mmc2
dev_mount sdcard /mnt/sdcard auto /devices/platform/msm_sdcc.4/mmc_host/mmc2
#end line ## keep this line
Click to expand...
Click to collapse
Nobody dont know? Help me please :angel:
Hi,
I've tried to edit the vold.fstab on my xperia pro to swap the internal and the external sd.
On my Xperia sola I had no problems but on the Xperia pro I don't know what I have to change.
Is there anyone who can help me?
The vold.fstab looks like this:
## Vold 2.0 fstab for Mogami
#
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard auto /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.4/mmc_host/mmc0 /devices/platform/msm_sdcc.4/mmc_host/mmc1
Thank you!
anyone who can help me?
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#FIXME: Swap again?
# internal sdcard
dev_mount sdcard /storage/sdcard0 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc2
# external sdcard
dev_mount emmc /storage/sdcard1 1 /devices/platform/s3c-sdhci.0/mmc_host/mmc0
Any kind soul can help me?
I have mess up my vold.fstab file on my GT-N7105 and thus the SD-Card is undetectable.
Can somebody send me the original vold.fstab.
Thank!
eugeneyan87 said:
Any kind soul can help me?
I have mess up my vold.fstab file on my GT-N7105 and thus the SD-Card is undetectable.
Can somebody send me the original vold.fstab.
Thank!
Click to expand...
Click to collapse
Or anybody know how to edit the vold.fstab to make my Micro SD detectable?
It keep on saying massage : SD card is safe to remove and when i press mount it is still the same.
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
## storage_struct - ex) series, "/mnt/sdcard/extStorages" / parallel
######################
# internal sdcard
{
ums_sys_path = /sys/class/android_usb/f_mass_storage/lun1/file
android_secure_containers = enable
}
dev_mount sdcard /storage/sdcard0 auto /devices/platform/s3c-sdhci.2/mmc_host/mmc1
# external sdcard
{
ums_sys_path = /sys/class/android_usb/f_mass_storage/lun0/file
discard = enable
}
dev_mount sdcard1 /storage/extSdCard 11 /devices/platform/dw_mmc/mmc_host/mmc0/mmc0 encryptable_nonremovable
#usb host device
{
media_type = usb
}
dev_mount sda /storage/UsbDriveA auto /devices/platform/s3c_otghcd/usb
#usb host device
{
media_type = usb
}
dev_mount sdb /storage/UsbDriveB auto /devices/platform/s3c_otghcd/usb
#usb host device
{
media_type = usb
}
dev_mount sdc /storage/UsbDriveC auto /devices/platform/s3c_otghcd/usb
#usb host device
{
media_type = usb
}
dev_mount sdd /storage/UsbDriveD auto /devices/platform/s3c_otghcd/usb
#usb host device
{
media_type = usb
}
dev_mount sde /storage/UsbDriveE auto /devices/platform/s3c_otghcd/usb
#usb host device
{
media_type = usb
}
dev_mount sdf /storage/UsbDriveF auto /devices/platform/s3c_otghcd/usb
#EOF
hi its posible mount sd card as mnt/sdcard ? (now : mnt/extsdcard)
i found in file vold.fstab
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
#storage_struct = series, "/mnt/sdcard/extStorages"
#storage_struct = parallel
{
}
dev_mount sdcard /storage/extSdCard auto /devices/platform/msm_sdcc.3/mmc_host/mmc1/
it is posiblechange and after install app on sdcard
thanks for discution
Hello everyone, as the title zopo zp500s own one and I would make sure that the smartphone would recognize only the micro SD memory as I read some guides on changing the file system / etc / vold.fstab but without success, some of you may give me a hand?
if you want I can also post the rom
Thanks in advance
Gianni
I write the file directly vold.fstab:
## Vold 2.0 Generic fstab
## - San Mehat ([email protected])
##
#######################
## Regular device mount
##
## Format: dev_mount <label> <mount_point> <part> <sysfs_path1...>
## label - Label for the volume
## mount_point - Where the volume will be mounted
## part - Partition # (1 based), or 'auto' for first usable partition.
## <sysfs_path> - List of sysfs paths to source devices
######################
## Example of a standard sdcard mount for the emulator / Dream
# Mounts the first usable partition of the specified device
dev_mount sdcard /mnt/sdcard [email protected] /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host
dev_mount sdcard2 /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.1/mmc_host
## Example of a dual card setup
# dev_mount left_sdcard /mnt/sdcard1 auto /devices/platform/goldfish_mmc.0 /devices/platform/mtk-sd.0/mmc_host/mmc0
# dev_mount right_sdcard /mnt/sdcard2 auto /devices/platform/goldfish_mmc.1 /devices/platform/mtk-sd.2/mmc_host/mmc2
## Example of specifying a specific partition for mounts
# dev_mount sdcard /mnt/sdcard 2 /devices/platform/goldfish_mmc.0 /devices/platform/msm_sdcc.2/mmc_host/mmc1