So i have a Galaxy S3 i747m, and was wondering if the"code name" for my phone is d2att?
I did a bit of reading around but couldnt dig up any info on how to find this out.
Any help would be greatly appreciated.
Sent from my SGH-I747M using Xparent Green Tapatalk 2
Adizzzle said:
So i have a Galaxy S3 i747m, and was wondering if the"code name" for my phone is d2att?
I did a bit of reading around but couldnt dig up any info on how to get this info.
Any help would be greatly appreciated.
Sent from my SGH-I747M using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I believe d2can
Essentially yes, it's actually a d2can but they are exactly the same phone. It is perfectly safe to use anything for d2att, you may have to change your apn to get data to work properly.
Sent from my SGH-I747M using xda app-developers app
jbradbury said:
Essentially yes, it's actually a d2can but they are exactly the same phone. It is perfectly safe to use anything for d2att, you may have to change your apn to get data to work properly.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
Thank you both very much, is apn easy to change?
Sent from my SGH-I747M using Xparent Green Tapatalk 2
Adizzzle said:
Thank you both very much, is apn easy to change?
Sent from my SGH-I747M using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Just enter in your carrier's apn(s) and you're all set. In settings > more > mobile networks > apns
Really easy, use this app to back it up. https://play.google.com/store/apps/details?id=com.riteshsahu.APNBackupRestore
Follow the instructions on the Google play description to install as system app using titanium. Then just restore after your done flashing your new Rom.
Sent from my SGH-I747M using xda app-developers app
Appreciate all the help. I suppose I should get my sim card going and get this bad boy rooted now.
Sent from my SGH-I747M using Xparent Green Tapatalk 2
jbradbury said:
Essentially yes, it's actually a d2can but they are exactly the same phone
Click to expand...
Click to collapse
What about the modems? Each time I attempt to flash a stock i747M rom on my i747, I get a SBL2 error message.
Anonymously_Unknown said:
What about the modems? Each time I attempt to flash a stock i747M rom on my i747, I get a SBL2 error message.
Click to expand...
Click to collapse
Modems do differ.
However, the physical radio chip that's inside either phone is exactly the same.
So just flash a modem using CWM/TWRP from the thread below that corresponds to your needs.
http://forum.xda-developers.com/showthread.php?t=1831898
HiKsFiles said:
Modems do differ.
However, the physical radio chip that's inside either phone is exactly the same.
So just flash a modem using CWM/TWRP from the thread below that corresponds to your needs.
http://forum.xda-developers.com/showthread.php?t=1831898
Click to expand...
Click to collapse
Are you saying that it's not possible to do the flash of the entire ROM through ODIN and then flash the correct modem through CWM.
Anonymously_Unknown said:
Are you saying that it's not possible to do the flash of the entire ROM through ODIN and then flash the correct modem through CWM.
Click to expand...
Click to collapse
he's saying it IS possible
xBeerdroiDx said:
he's saying it IS possible
Click to expand...
Click to collapse
What I want to know about is the ENTIRE ROM, including the modem?
I just want to know why I'm getting the SBL2 error message when I use ODIN to do it.
Because your trying to flash the wrong stock Rom. Flash a stock Rom for the I747m and it should work. If you are trying to flash the correct stock Rom and get that error, I'm at a loss atm.
Anonymously_Unknown said:
What I want to know about is the ENTIRE ROM, including the modem?
I just want to know why I'm getting the SBL2 error message when I use ODIN to do it.
Click to expand...
Click to collapse
mrhaley30705 said:
Because your trying to flash the wrong stock Rom. Flash a stock Rom for the I747m and it should work. If you are trying to flash the correct stock Rom and get that error, I'm at a loss atm.
Click to expand...
Click to collapse
you're getting a bootloader error so i would back off trying to flash a different model's firmware otherwise you will continue to get this message.
xBeerdroiDx said:
you're getting a bootloader error
Click to expand...
Click to collapse
Therefore the two devices are not the same (hardware wise).
I thought these devices came with unlocked bootloaders from factory (unlike the SGS2).
They are. If they weren't, root and customization would be almost impossible. The bootloader error doesn't signify a different hardware, just software implementation by the carrier. Have you applied the Google wallet fix, or anything that would change the device info on the build.drop?
mrhaley30705 said:
Have you applied the Google wallet fix, or anything that would change the device info on the build.drop?
Click to expand...
Click to collapse
No, I haven't . I'll try this, and let you know.
Adizzzle said:
Thank you both very much, is apn easy to change?
Sent from my SGH-I747M using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Some ROMs (such as CyanogenMod) already have the APNs for all carriers. It automatically chooses which APNs based on what network you are using.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Related
Is it possible to run a stock Bell ROM on the AT&T S3 by flashing with Odin?
omegacell said:
Is it possible to run a stock Bell ROM on the AT&T S3 by flashing with Odin?
Click to expand...
Click to collapse
Radios won't work
Sent from my SGH-I747 using xda premium
Really? Can you just flash the AT&T modem on top? I can't get the flash to even take at this point. I get an Auth error.
omegacell said:
Really? Can you just flash the AT&T modem on top? I can't get the flash to even take at this point. I get an Auth error.
Click to expand...
Click to collapse
Right cause it is not built to run. Why would you want to do that anyways? ATT stock sucks and is full of bloat.
Sent from my SGH-I747 using xda premium
pussyliquor said:
Right cause it is not built to run. Why would you want to do that anyways? ATT stock sucks and is full of bloat.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
That's exactly why I want it. I want I747M (Bell) to run on my AT&T i747. I thought the phones were the same, there's no difference in the hardware as far as I can tell.
Hi. Before flashing PA I was on 1317m Rogers but after it switched to n7105. There's no problem with that right? Btw everything is working perfectly.
Sent from my GT-N7105 using xda premium
You can easily change it by editing build.prop using root explorer. Open root explorer, system press n hold build.prop use text editor then change model to l317M.
Thanks!
Sent from my GT-N7105 using xda premium
jon3sh said:
You can easily change it by editing build.prop using root explorer. Open root explorer, system press n hold build.prop use text editor then change model to l317M.
Click to expand...
Click to collapse
But what I'm trying to ask is instead of going to at&t and try to find a Rom that will work for my phone I can go to the GTn7100 and GT n1707 section and flash a Rom without any problems right?
Sent from my GT-N7105 using xda premium
Erichuynh said:
But what I'm trying to ask is instead of going to at&t and try to find a Rom that will work for my phone I can go to the GTn7100 and GT n1707 section and flash a Rom without any problems right?
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Sorry my bad, I would stay away from N7100 and N7105 section. There so many N7100 and N7105 ported rom for our device in att section so just use the ones from here. If read the changelogs of some roms here you will see MF2 roms are originally from N7xx roms.
Edit..
Flashing rom made for N7xx device can mess up your modem, imei etc. I
Thank you much much for this info. I did try to flash a n1700 Rom once and like you said I didn't get any connectivity on my Rogers carrier even when I found a modem to flash, and ended up having to go back to stock plus factory resets which is such a pain
Sent from my GT-N7105 using xda premium
Erichuynh said:
Thank you much much for this info. I did try to flash a n1700 Rom once and like you said I didn't get any connectivity on my Rogers carrier even when I found a modem to flash, and ended up having to go back to stock plus factory resets which is such a pain
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
You could have ended up with a brick.....
Or corrupted imei.
You can't flash n7100 roms
crixley said:
You could have ended up with a brick.....
Or corrupted imei.
You can't flash n7100 roms
Click to expand...
Click to collapse
This is my first Android phone so I didn't know
Sent from my GT-N7105 using xda premium
Erichuynh said:
This is my first Android phone so I didn't know
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Not trying to be rude, but just be very careful!
You don't want to end up with an expensive brick
crixley said:
Not trying to be rude, but just be very careful!
You don't want to end up with an expensive brick
Click to expand...
Click to collapse
Even when it's bricked is it still possible to actually get into recovery wipe all caches and do a factory reset then get back to stock Rom right?
Sent from my GT-N7105 using xda premium
Erichuynh said:
Even when it's bricked is it still possible to actually get into recovery wipe all caches and do a factory reset then get back to stock Rom right?
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
Brick like dead screen, not responding to anything or wont show n your computer when connected to usb or simply expensive paper weight. Only way to revive it flash via jtag etc. There is also soft brick where its only black screen but you can still flash roms via Odin and flashing wrong rom can cause soft brick too.
Erichuynh said:
Even when it's bricked is it still possible to actually get into recovery wipe all caches and do a factory reset then get back to stock Rom right?
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
What he said above...
There is also a corrupt efs partition. If you didn't have it backed up you have no imei, and so you have a phone that can turn on but can't connect to any network, this can be permanent and has happened to people from flashing n7100 roms
crixley said:
What he said above...
There is also a corrupt efs partition. If you didn't have it backed up you have no imei, and so you have a phone that can turn on but can't connect to any network, this can be permanent and has happened to people from flashing n7100 roms
Click to expand...
Click to collapse
Yep I did more in depth research about the hard bricked phones and it sucks!
Sent from my GT-N7105 using xda premium
Erichuynh said:
Yep I did more in depth research about the hard bricked phones and it sucks!
Sent from my GT-N7105 using xda premium
Click to expand...
Click to collapse
yeah hard bricked or corrupted efs both suck :/
I have never bricked a phone and been using android since early 2009.
I'm crazy cautious
Back up of EFS is a must too, it is a good habit that you always have nand, modem csc patch and efs back up saved to you external card or computer.
Once your a little more familiar with your phone this is a good thread to check out http://forum.xda-developers.com/showthread.php?t=2018411. For the most part the i317 and 7105 are identical except for modem and gps files DO NOT FLASH A 7100 ROM Unless it has been modded following the posted thread. Personally i have been using Jedi x17 it has everything i want extended boot menu,Lidroid 23 toggles,speed tweaks etc... Now i have made my own modifications as well (status bar,speedometer and ringtones) I also have been working on modding MA3 rom as well in my spare time but really Jedi works just fine. Just my two cents. Good Luck and have fun,Dave
well. they said it could not be done. but i did it. i downgraded from 4.3 to 4.1.2. and so far everything is working. i used mobile odin pro. loaded the stock 4.1.2 rom but loaded the modem from 4.3. i have a working phone, sound and network.lets see how long it will work for.
and just let me add virgin s3 sgh-i747m
As far as I am aware it was never said this was not possible with mobile ODIN. Desktop ODIN is the issue because it attempts to downgrade the bootloader which is what bricks the phone. You can bypass the bootloader with mobile ODIN so therefore no bricking.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
well i have been searching high and low for a way and nobody had posted anything. im just glad this worked.
Big thread here: http://forum.xda-developers.com/showthread.php?t=1347899
aybarrap1 said:
As far as I am aware it was never said this was not possible with mobile ODIN. Desktop ODIN is the issue because it attempts to downgrade the bootloader which is what bricks the phone. You can bypass the bootloader with mobile ODIN so therefore no bricking.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
this is correct.
well maybe someone should post a thread about it. like i did. not something that is 377 pages long and a noob like me wont understand. keep it simple. basic directions and links to downloads. its good that you showed a link to how to use mobile oden. but some people don't understand half this stuff. i'm still learning the basics but could not take 4.3 any longer so i took a chance. bricked my phone 20 times trying different stuff and posted what i finally got to work so others can find it easier.
redneckracing said:
well maybe someone should post a thread about it. like i did. not something that is 377 pages long and a noob like me wont understand. keep it simple. basic directions and links to downloads. its good that you showed a link to how to use mobile oden. but some people don't understand half this stuff. i'm still learning the basics but could not take 4.3 any longer so i took a chance. bricked my phone 20 times trying different stuff and posted what i finally got to work so others can find it easier.
Click to expand...
Click to collapse
So i can flash 4.1.2 but without downgrading my bootloaders right? Where can i found a 4.1.2 stock rom without bootloader? Or better yet how about 4.1.1? Is it possible to flash this versions without changing my MJB bootloader?? Good thread by the way
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smallyetzon said:
So i can flash 4.1.2 but without downgrading my bootloaders right? Where can i found a 4.1.2 stock rom without bootloader? Or better yet how about 4.1.1? Is it possible to flash this versions without changing my MJB bootloader?? Good thread by the way
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i found some of my files here...
http://forum.xda-developers.com/showthread.php?t=1739426
and the rest i downloaded from sammobile
the way i did it is i loaded the old stock file 4.1.1 or 4.1.2 in mobile odin but i loaded the modem file from the 4.3 that i got from link above. it will not change your bootloader but will give you a mix of 4.1.1 and 4.3. make sure you also select to root devise well updating. and use mobile oden pro. it's well worth the $5.00. it took me all of 2 min. fyi you have to load both roms to your sd card on the phone. and back up your phone first. it wiped mine when i did it.
redneckracing said:
i found some of my files here...
http://forum.xda-developers.com/showthread.php?t=1739426
and the rest i downloaded from sammobile
the way i did it is i loaded the old stock file 4.1.1 or 4.1.2 in mobile odin but i loaded the modem file from the 4.3 that i got from link above. it will not change your bootloader but will give you a mix of 4.1.1 and 4.3. make sure you also select to root devise well updating. and use mobile oden pro. it's well worth the $5.00. it took me all of 2 min. fyi you have to load both roms to your sd card on the phone. and back up your phone first. it wiped mine when i did it.
Click to expand...
Click to collapse
Can i flash this with mobile odin and wont brick my device?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smallyetzon said:
Can i flash this with mobile odin and wont brick my device?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
i don't guarantee anything. but this was the only thing that didn't brick my phone.
just make sure your phone is rooted first. i downloaded the root66 4.3 on my phone with odin then copied it as well as the stock 4.1.2 to my sd card.
redneckracing said:
just make sure your phone is rooted first. i downloaded the root66 4.3 on my phone with odin then copied it as well as the stock 4.1.2 to my sd card.
Click to expand...
Click to collapse
Im allready on 4.3 so i just flash 4.1.1 right? Hey question..do u know if 4.1.1 will work with new bootloader? I heard it breaks the camera but not sure
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smallyetzon said:
Im allready on 4.3 so i just flash 4.1.1 right? Hey question..do u know if 4.1.1 will work with new bootloader? I heard it breaks the camera but not sure
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
im not sure about 4.1.1. i am using 4.1.2 and both my cameras work
here is a screen shot of my about page.
Have you tried to sim-unlock after downgrade? I also have one S3 with 4.3 and I really want to downgrade to unlock, but not sure if unlock would work without downgrading the bootloader
redneckracing said:
here is a screen shot of my about page.
View attachment 2535645
Click to expand...
Click to collapse
Sorry to keep bugging but this is so scarry, is this pic looks right? Im about to flash
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smallyetzon said:
Sorry to keep bugging but this is so scarry, is this pic looks right? Im about to flash
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
click on the "modem" you have to change it to the 4.3 file. it should be the MK5
redneckracing said:
click on the "modem" you have to change it to the 4.3 file. it should be the MK5
Click to expand...
Click to collapse
Ohh so i have to download and unzip the 4.3 mk5? Ok ok thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
smallyetzon said:
Ohh so i have to download and unzip the 4.3 mk5? Ok ok thanks
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
ya you need both files. then when you select the "modem" button it will let you change just that file.
redneckracing said:
click on the "modem" you have to change it to the 4.3 file. it should be the MK5
Click to expand...
Click to collapse
The problem is that my phone is i747 At&t and modem should be MJB i think
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I was trying to update my bootloader so I could update to a current KK ROM. I don't know what happened but I cant even get into download mode with a jig. It takes a charge and is somewhat detected by windows but that's it.
Can someone please point me in the right direction for a possible fix?
thanks for the help!
Where did you get the bootloader for your phone? Are you sure it was for the i747m and not i747?
audit13 said:
Where did you get the bootloader for your phone? Are you sure it was for the i747m and not i747?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2321310
Flashed MK5 and lost my baseband and IMEI.
Tried another one and kuput.
Once you flash the mk5 bootloader, it cannot be downgraded. Any attempts to downgrade could brick the phone.
SInce your phone isn't booting, you may have to have it jtagged.
I have seen a thread for de-bricking but that looks like it is for the AT&T s3.
audit13 said:
Once you flash the mk5 bootloader, it cannot be downgraded. Any attempts to downgrade could brick the phone.
SInce your phone isn't booting, you may have to have it jtagged.
I have seen a thread for de-bricking but that looks like it is for the AT&T s3.
Click to expand...
Click to collapse
Why would it have lost my IMEI?
I saw a method that involved a 16gb SD card...just need to find more specific instructions....any ideas?
If not where can I find detailed instructions to do a jtag? I have access to the tools required.
I purchased an early upgrade to a Nexus 5 and would rather return it and return to my S3 so the sooner the better!
Thanks for the assist!
Jtagging is not simple because you would need to disassemble the phone in order to access the relevant points on the motherboard.
Did the phone boot after you flashed the mk5 bootloader? Did you flash another bootloader after that?
Which carrier is your phone with?
You could try this: http://forum.xda-developers.com/showthread.php?t=2549068
The MK5 bootloader is the stock 4.3 bootloader to Canadian carriers.
audit13 said:
Jtagging is not simple because you would need to disassemble the phone in order to access the relevant points on the motherboard.
Did the phone boot after you flashed the mk5 bootloader? Did you flash another bootloader after that?
Which carrier is your phone with?
You could try this: http://forum.xda-developers.com/showthread.php?t=2549068
The MK5 bootloader is the stock 4.3 bootloader to Canadian carriers.
Click to expand...
Click to collapse
It did boot after mk5 but no baseband or imei.
Its with Bell.
I'll check it out tx
Sent from my Nexus 5 using xda app-developers app
solaris11 said:
It did boot after mk5 but no baseband or imei.
Its with Bell.
I'll check it out tx
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
So the phone boots? If it does, did you try flashing an updated modem? Try an updated modem before de-bricking.
BTW, I was able to install several KK ROMs using the stock 4.1.2 bootloader. Upgrading wasn't necessary for Validus, Cyanfox, and CM11.
audit13 said:
So the phone boots? If it does, did you try flashing an updated modem?
BTW, I was able to install several KK ROMs using the stock 4.1.2 bootloader. Upgrading wasn't necessary for Validus, Cyanfox, and CM11.
Click to expand...
Click to collapse
No I tried flashing another one after that because of the no imei/baseband. And now it won't boot. I was trying to upgrade from an older omni 4.4 ROM to the latest one and cwm wouldn't flash the ROM using the latest cwm
Sent from my Nexus 5 using xda app-developers app
solaris11 said:
No I tried flashing another one after that because of the no imei/baseband. And now it won't boot. I was trying to upgrade from an older omni 4.4 ROM to the latest one and cwm wouldn't flash the ROM using the latest cwm
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Did you try to flash an older Bell bootloader? If you did, this would have cause the bricking.
Is it possible the battery has been depleted?
audit13 said:
Did you try to flash an older Bell bootloader? If you did, this would have cause the bricking.
Is it possible the battery has been depleted?
Click to expand...
Click to collapse
I think I did flash an older one ....no it takes a charge tested it in a friends s3.
Sent from my Nexus 5 using xda app-developers app
solaris11 said:
I think I did flash an older one ....no it takes a charge tested it in a friends s3.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I assume you've tried several times to get into download or recovery without success. Do you have any warranrt left on the phone? You may have to get it jtagged.
audit13 said:
I assume you've tried several times to get into download or recovery without success. Do you have any warranrt left on the phone? You may have to get it jtagged.
Click to expand...
Click to collapse
Yeah even with a jig. Its not under warranty...my brother has the tools required and experience soldering boards so that's a last resort. Will try the method posted previously.
I'm not minding this nexus 5. If I get my s3 going I may just sell it and keep this lol.
Sent from my Nexus 5 using xda app-developers app
solaris11 said:
Yeah even with a jig. Its not under warranty...my brother has the tools required and experience soldering boards so that's a last resort. Will try the method posted previously.
I'm not minding this nexus 5. If I get my s3 going I may just sell it and keep this lol.
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
I don't know where you are located but if you're in Toronto, I recommend Ming Wireless in downtown Toronto. They charge $75 to jtag a Samsung.
audit13 said:
I don't know where you are located but if you're in Toronto, I recommend Ming Wireless in downtown Toronto. They charge $75 to jtag a Samsung.
Click to expand...
Click to collapse
About 4 hrs away from Toronto so not really an option
Sent from my Nexus 5 using xda app-developers app
solaris11 said:
About 4 hrs away from Toronto so not really an option
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
That's too bad. I wish you and your brother the best of luck. The s3 is a nice phone, but not as nice as the N5!
audit13 said:
That's too bad. I wish you and your brother the best of luck. The s3 is a nice phone, but not as nice as the N5!
Click to expand...
Click to collapse
Thanks for the help.
Yeah I'm enjoying the nexus, but I had to pay an arm and a leg for an early upgrade, so I just want everything back to normal so I can get a new phone without paying a fortune for it lol...trying not to get too attached to this one for the time being
Sent from my Nexus 5 using xda app-developers app
One word. Odin
Apph3x said:
One word. Odin
Click to expand...
Click to collapse
The op can't get into download mode so i don't think Odin will help.
Loading an incorrect bootloader can result in a hard brick where the phone needs to be jtagged.
Hello,
I want to install I9505 modems on my SGH-M919. this is possible?
thanks!
golan5 said:
Hello,
I want to install I9505 modems on my SGH-M919. this is possible?
thanks!
Click to expand...
Click to collapse
It's a very bad idea to attempt to flash a radio or firmware from a different variant. You could end up with a bricked device. Why are you trying to flash AT&T modem anyways? I'd suggest unlocking the device, either yourself or by taking it to your current carrier for unlocking, then just go to AT&T and get it ported over.
Sent from my SGH-M919 using xda app-developers app
JORDVN said:
It's a very bad idea to attempt to flash a radio or firmware from a different variant. You could end up with a bricked device. Why are you trying to flash AT&T modem anyways? I'd suggest unlocking the device, either yourself or by taking it to your current carrier for unlocking, then just go to AT&T and get it ported over.
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I want to flash radio firmware because the signal very low.
i don't need the AT&T modem- I live outside USA.
so which modem i can install on my device?
thanks!!
golan5 said:
I want to flash radio firmware because the signal very low.
i don't need the AT&T modem- I live outside USA.
so which modem i can install on my device?
thanks!!
Click to expand...
Click to collapse
It would have to be a hybrid modem
Sent from my SGH-M919 using Tapatalk
spyke1999 said:
It would have to be a hybrid modem
Sent from my SGH-M919 using Tapatalk
Click to expand...
Click to collapse
what is hybrid modem? and how i can install it?
thanks!!