What's the best way to switch out your sd card without losing any of its contents. My best guess would be to:
1) Copy contents of old sd card onto your hard drive
2) Remove old sd card
3) Format new sd card
4) Copy contents of old sd card from hard drive to new sd card
Am I missing anything? I've read that FAT32 is recommended over exFAT? Has anyone heard different? Also, is it better to format the card using your PC or should I just format the card in my S3?
Hi,
I recently switched from an 8gb sdcard to a 16gb sdcard. I put everything from the 8gb on my computer hard drive, safely unmounted via storage in settings, then just popped the new one in, not messing with format or anything. a month later and I'm doing fine.
Hope this helps
I would recommend formatting the sdcard in a PC, if possible
If not, then do it through your phone
And yes, the procedure you have laid out is perfectly fine
Related
I have a rooted phone with an 8gb sd card in it where i store clockworkmod recoveries, backups, ROMs, many apps, media of course etc etc. So if ever I were to change the SD card in the phone, what is the correct procedure to do so such that I don't screw up the phone?
Has anybody else gone through this recently? Reason I ask is I am going to order a 32gb sd card (I believe up to 32 is supported) shortly.
Thanks
Nothing bad happened to me. My 8gb card no longer works so I had to replace it with my 2gb that came with it. There's no procedure with swapping sd cards in the phone, but you may wanna copy all the contents of your previous card to the desktop of your computer and transfer them to your new 1. If you reformatted your previous card to fat32 then do so with your new one. Pop it in and let it rip.
Sent from my ADR6300 using Tapatalk
Thanks! Seems easier than I was afraid it might be!
Soo, just copy and paste and put new card in? Is that it?
Yes, 32 Gb cards are supported. Make sure the new SD is formatted FAT32.
Don't remove or install any SD while device is powered on - unmount the SD, then power down to remove/reinstall SD.
Copy contents of old SD to PC so you'll have a backup - then copy to new SD, put in device, power on.
Noteworthy is if you use an AOSP ROM, many of those interact with SD during boot, so if you simply replace old with new and it isn't formatted FAT32 and/or do not have the contents of the old card on it, you will bootloop.
Recommend making period backups of SD to PC - monthly or some frequency meaningful to you ~ so you have a backup if/when SD card fails.
Hey all,
I have a new 32 gb micro sd for my G2. I have a couple of questions.
1. do I have to unmount the original 8 gb card prior to taking it out?
2. What are the ramifications if I don't unmount it?
3. do I have to format the new card after it's in the phone?
4. I have unchecked all the apps so that none are storing on the SD card. Is there a way to move the remaining data from the SD card to the phone?
5. Is it possible to "Clone" the data from the current SD card to the new one?
Thx
Mark
Slarti77 said:
Hey all,
I have a new 32 gb micro sd for my G2. I have a couple of questions.
1. do I have to unmount the original 8 gb card prior to taking it out?
2. What are the ramifications if I don't unmount it?
3. do I have to format the new card after it's in the phone?
4. I have unchecked all the apps so that none are storing on the SD card. Is there a way to move the remaining data from the SD card to the phone?
5. Is it possible to "Clone" the data from the current SD card to the new one?
Thx
Mark
Click to expand...
Click to collapse
1. No need to unmount, since you'll need to remove the battery anyway to insert the new card.
2. Nothing
3. Would be best
4. Copy and paste contents to new card
5. See 4
Hey A&D
Thx for the quick reply ...
So can I Simply plug the phone into the computer, copy everything that shows up under the directory for the phone to th computer ...then copy it all back to the new SD card once I install it in the phone?
Also, when the phone is plugged into the computer and shows up as storage am I only seeing data on the SD card or is it showing data on the internal memory as well?
Thx
Mark
Sent from my T-Mobile G2 using XDA App
Yes, that should work. If you have any apps installed to the SD card through Applications setting, I'd move them back to phone memory before you make the switch. They are stored in the .android_secure folder. Also you might want to format your new SD to FAT32 on your PC before moving your data back. But sounds like you're on the right track.
And you should not be seeing anything from internal memory while the SD is mounted.
Sent from my HTC Vision using XDA App
Hello,
IN recovery under mount and storage menu, there is an option format/SD card?
My question is that, will this format the external SD card or will it format the internal SD card ?
I want to make sure, because what I want to do is format my external SD card.
I tried formatting the card with my PC, the phone still can not see it.
My 32 GB external card , doesn't show up. Maybe If I format it using the phone, the phone will be able to see it.
thank you in advance
If your phone can't detect the external memory card, how can it format it? You'll end up formatting the internal card. Looking at my settings, I do not think the phone even allows you to format the external card from the Storage menu.
mmm. ...... I inserted an 8GB card in it, the phone was able to detect it, but when I insert the 32GB it can't see the card.
Any ideas what the issue maybe?
didn't find the answer through search. if i installed an sd card and used it as an sd card and not an extension of phone memeory, can i remove the card and copy the files to my computer. install a new larger memory card and format as internal memory then drag and drop the sd card files from my pc back onto the phone without a problem?
Yes. Just turn the phone off when you take out / insert the card to be safe.
My existing SD card is running out of capacity, so im trying to insert a 64Gb card into the phone. When trying to clone the this card in my laptop, i keep getting the message to format the card. Which obviously i don't want to do. The card works fine in the phone so i don't suspect a faulty card. If i plug the phone into the laptop the card is visible, and i can copy the files, and transfer them to my 64Gb card but then this is not usable on the phone. What is the procedure for upgrading the SD card in the Lenovo P2.
My observations lead me to believe that the formatting of the P2 is not compatible with windows 10.
any help much appreciated.
Regards
John M
Copy the files from the previous SD card to your computer by using the USB cable to connect the phone. Then do the same to copy to the new card.
It sounds like your SD card is formatted as internal memory rather than portable.
When you put in your new SD it will ask how you want to use it. Choose portable and copy your files over.
Tripov said:
Copy the files from the previous SD card to your computer by using the USB cable to connect the phone. Then do the same to copy to the new card.
Click to expand...
Click to collapse
Ok i get that but my new card should be formatted as portable, as mentioned by philjet
philje123 said:
It sounds like your SD card is formatted as internal memory rather than portable.
When you put in your new SD it will ask how you want to use it. Choose portable and copy your files over.
Click to expand...
Click to collapse
Got the new SD card with files copied as you suggested, but the apps on the phone dont see the data on the new portable card.
is t here a workaround for this?
Thanks