Develop Bugs

flashing problems

ok I've rooted and installed clockwork recovery as per the instructions in the how to. Still each time I go to flash a rom I get nothing but the galaxy sII logo and it hangs there indefinitely. Did I miss a step in these instructions ? I'm on EL29 baseband if that helps.
http://www.youtube.com/watch?v=v7pWjmKCsoc
those are the instructions I used. and I don't think I've missed a step. I've reverted back to stock and re rooted my phone and installed clockwork. How do I get roms to actually flash?

Depends, what are you trying to flash?
Sent from my SPH-D710 using xda app-developers app

I see the link in your video is just for rooting, but you can get into CWM? did you try the auto root EL29+CWM? Also, if you are following to Devs instructions on how to flash the ROM you should be good to go. have you tried wiping everything first or just installing it over the previous ROM? i suggest downloading Calkulin's Format All zip. flash it before you flash a ROM.
Link: http://forum.xda-developers.com/showthread.php?t=1527041 its at the bottom of the 1st post.
Link: http://forum.xda-developers.com/showthread.php?t=1342728
is this what you used for CWM?

yeah those are the things I used actually to get clockwork. It'll let me use clockwork, wipe everything install whatever but when I go to reboot to start it up it hangs at the galaxy s2 screen. I let it go for 2 hours last night. Any rom honestly would be fine at this point. I'm pretty familure with twrp,cwm,and 4ext from the evo 3d but nothing works with this phone.

Would the steps for flashing a rom say blazer for example be
Wipe data, dalvik, and chache.
flash zip from sd reboot? like normal or am I missing a step with another kernel or something?

it would be the same. but I use the Calkulin's Format All zip to do it for me. I know you do get a longer boot then normal because its building delvik cache but not two hours. have you tried downloading the ROM to your computer and then transfering it over to your phone? I had an issue a few days ago because of a bad download(good thing I had my nandriod). What CWM do you have? 5.0.2.7?

yeah thats the only way I do it actually. D/l from the laptop and copy it to sd. then use calkulins to wipe everything and it still just sits.

I just googled "flash ROM boot loop" it came up with something. What is your default launcher? Some people have had problems if they use for say go launcher or another launcher and not have one set as default. On calkulins ROM.
Sent from my SPH-D710 using xda app-developers app

I am still on the stock rom. only thing I can do is root it with odin and and add clockwork mod with e4gtauto prog. I still have no idea whats going on.

So your on stock TW launcher?
Try flashing a different kernel. Like rogue, that is another recovery based off of CWM. That's what I use, well I use both and haven't had a problem. Another thing is get an MD5 checksum program for your laptop and check the file sum for integrity. Sorry it took me awhile to respond, finally have a day off.
Sent from my SPH-D710 using xda app-developers app

I actually tried flashing one wth mobile odin that I found on the cyanogenmod page. It booted to the android text logo and that was it. so thats a step in the right direction. Should I just flash it through clockwork after I flash the rom like normal?

That's your problem. If your flashing a GB ROM you need a GB kernel. If your flashing an ICS ROM you need preferably EL26 kernel then use CWM to flash the ROM and kernel. flash the rogue kernel in the kernel repository then try flashing a GB ROM. After that then you should be good to go.
Sent from my SPH-D710 using xda app-developers app

I appreciate the help so much dude. so When I get home I should flash the kernel through odin then boot into recovery n flash the rom n I should be good? or do I just boot into recovery n flash the rom then the kernel? sorry about so many q's.

No problem. That's what the forum is for. let me know how it works out for ya.
Sent from my SPH-D710 using xda app-developers app

And yes flash it through Odin and boot into recovery and flash your ROM. you can also flash the ROM in CWM and then flash the kernel right after you flash the ROM. It seems to be easier in CWM then Odin.
Sent from my SPH-D710 using xda app-developers app

I must be an idiot or my phone doesn't wanna do it. Tried flashing the kernel and aokp a few times now and got nothing. I must be using the wrong stuff for the Job.

Get yourself back to stock with cwm. Pick a ROM and follow the directions in the op for that specific ROM. If anything seems unclear watch one of qbking77's videos on how to install that ROM. Qb has NEVER steered me wrong.
Blu Kuban
Its what all the cool kids are using.
Noob trolled the troll that tried to troll the Noob.
~~~coal686~~~

Ravaged Pheonix said:
Get yourself back to stock with cwm. Pick a ROM and follow the directions in the op for that specific ROM. If anything seems unclear watch one of qbking77's videos on how to install that ROM. Qb has NEVER steered me wrong.
Blu Kuban
Its what all the cool kids are using.
Noob trolled the troll that tried to troll the Noob.
~~~coal686~~~
Click to expand...
Click to collapse
That's what I've been telling him. Do you have anything else that maybe I'm forgetting? Maybe EL26 direct boot?
Sent from my SPH-D710 using xda app-developers app

thats kinda what I've been doing. I got cyanogen to boot with the rogue et recovery fb27 and cm9 but market won't actually work. so I went back to stock. I actually used qbking's videos to start with and followed them and it still just hangs. This is the process I'm using.
flash kernel/recovery through odin.
calkulins wipe all
flash rom
flash gapps if needed for said rom
reboot.
I've also tried without the 1st step.
I've tried flashing the el26 kernel that everyone seems to say is safe through odin and that boots me into the recovery and I try to wipe then flash and it still does nothing. am I just flashing the wrong intitial kernel to begin with? I can't figure out why Im having this problem now since I've had multiple rooted phones in the past with no issues.

But now I'm back on stock gingerbread again completely just rooted and then the did the e4gtauto to get a recovery.

Can't install any ROMs to SGH-T999V

Well, I tried Cyanogen, AOPK and now I tried PARANOID 2.0.
None of them works, GAPPS works, but I get the Status 7 error while installing a ROM, i'm using the SGH-T999V and none of them works.

How are you trying to install them?
Sent from my SGH-T999 using xda premium

You are rooted and trying to install with cwm or twrp recovery, right.
I ask because that error reminds me of stock recovery for some reason...
Sent from my SGH-T999 using xda app-developers app

Hey make sure you've rooted your phone first. I'm on cm10 with leankernel and everything works just great. Good luck!
Sent from my SGH-T999v using xda app-developers app

Sounds like stock recovery to me bud..
Sent from my T999 GS3 @ 2GHZ

d2tmo wrong device?

Status 7 errors can occur in ClockworkMod for everyone saying he's using a stock recovery.

Make sure your rooted and you should be good

Hey SGH-T999V,
I think we'd all love to help, but we need some more information. Can you tell us step by step exactly what you are doing? Once we have that, I think we will be able to help you past this.

I am fully rooted with clockworld recovery 5.0.4 or something, installing zip from sdcard then Status error 7 and yeah...

From what I've gathered, status 7 errors usually occur when the ROM is incompatible with the device e.g when flashing a CDMA rom on a GSM phone. My first advice would therefore be to confirm that the zip file is for the correct GS3 variant. You mentioned aokp and CM. Both these ROMS refer to the T999 as "d2tmo" and the zip files usually contain this in the name (e.g cm-9-20120909-NIGHTLY-d2tmo.zip). I would therefore check this first before anything else.
Assuming that's not the issue, some suggestions would be:
1. This is a longshot, but try toggling signature verification and see what happens. I doubt this is the issue but I have had update zips fail because this was accidentally toggled
2. Try updating CWM: http://forum.xda-developers.com/showthread.php?t=1766552
3. Try changing the recovery to TWRP and see if its the recovery. The easiest way I've found is to use the GooManager app. Install from the play store. Run the app. Hit the menu key and select Install OpenRecoveryScript. Reboot into the TWRP recovery and try flashing from there.
4. Try rerooting the device from scratch

I got this error when I rooted using the Sprint method. I had to reflash cwm using Rom manager before I could install Cyanogen
Sent from my SGH-T999 using xda premium

I had the same problem. I updated cwm and it fixes it. Your version is old....
Sent from my SGH-T999 using Tapatalk 2

Just updated CWM to 6.0.1.2 and tried to flash with TWRP... same Status 7 error with every single ****ing ROMs i'm trying to install.
Wiped everything many times before installing zip, nothing works... i'm giving up and downloading stock ROM until Samsung releases official JB 4.1.

You might have to go back to stock and root it again
Sent from my SGH-T999V using XDA Premium HD app

could try installing the roms with Odin
Could try downloading the roms using Rom manager pro and having it install them
You just got to get one to work and you'll be golden
Is it a setting problem in cwm?
Like toggling allow installation of unsigned packages
Sent from my SGH-T999 using xda premium

Just update cwm to a newer version. I promise that'll fix it.
Sent from my SGH-T999 using xda premium

Or pay someone to do it. Look for rooting services on craigslist
Sent from my SGH-T999 using xda premium

same here
Hi, there,
just looking for solution for the same problem and got this thread...
well, I was rooted and on cyanogen and everything worked fine.
had backups and stuff.
decided to return to stock just to have it updated and backed up and after that to return to cyanogen.
when in CWM, after stock, while re-root-ing, I did a fix permission which erased some of my system files in the backups, so all my backups on the phone became useless (lesson #1: always move your backups away from the phone).
decided to start from scratch, so using ODIN I flashed the proper stock ROM for T999V. Installed the CWM version 5. something, superuser etc.
made a backup this time and store it outside the phone
when I tried to flash the cyanogen 10.0 for m2tmo (which I've flashed before without trouble), I got the error message as our friend here.
I edited the updater-script file in order to erase the first lines and got it flashed...
the problem that I have right now is that I am stuck in the first screen when the cyanogen keeps going round and round and round.... and nothing happens
any suggestion from here?

http://wiki.rootzwiki.com/ClockworkMod_Recovery#Status_7
The status 7 error can be from a bad download, bad signature, and I have seen it from using an old version of clockwork. I would first make sure you are running the most current version of recovery. if that doesn't solve your problem try redownloading the Rom.

[Q] Need Help Restoring Phone

Hello,
My friend has a galaxy s2 and recently his son somehow managed to get a virus on it. I have a lot of experience with rooting, flashing, and all that fun stuff. Especially with the t mobile galaxy s2 since I have one as well. He asked me If I can restore his phone back to a new rom since it was acting weird. For example, if he saves a new contact or installs or uninstalls an app, if he reboots all those changes are gone. It is as if the phone keeps rebooting to a certain time. I am guessing a virus is causing this.
So the first I thought of was to download a rom (Jedi Knight 6) and did the typical wipe data/factory reset and wipe cache/dalvik, then flashed the rom with success. When I rebooted the phone, it was still the same, as if I did nothing in the recovery. I thought it may have been because I was CWM, so I installed goo manager and flashed the TWRP recovery through there. It gave me success but when I boot to recovery, it is still CWM. At this point I decided to use ODIN to restore it to the original stock rom. I followed the instructions here (http://forum.xda-developers.com/showthread.php?t=1858435. First time I got a fail on ODIN, removed the battery and tried again and it gave me pass and the phone rebooted. When it did guess what? It was as if I did nothing.
I ran out of ideas. I did everything I can think of. I used the custom recovery to try to wipe everything and flash a new fresh rom but that failed. I even tried ODIN to restore it to stock but that failed as well. Is there anything else I can try? I did a lot of research but couldn't find anything, maybe someone can give me some tips?? Thank You in Advance!!

Can someone please help me?

This sounds very strange. You said even after you Odin back to stock it reverted back to what he had before you reinstall the stock ROM ? Was the phone rooted before you tried to help him?
Did you try an aosp ROM?
Sent from my SAMSUNG-SGH-T989 using xda premium

grannyrogers said:
This sounds very strange. You said even after you Odin back to stock it reverted back to what he had before you reinstall the stock ROM ? Was the phone rooted before you tried to help him?
Did you try an aosp ROM?
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
Yea I know its strange, and its not like I have no experience with these things. I was very suprised when that happened. Yes it was and is still rooted, Im sure because super su is on it. He is currently running JediMindTrick (ROM by ptmr3). I still dont know what to do. I will try an aosp rom, but if odin didnt do it I doubt another rom would lol.

http://donandroid.com/t989uvli4-t-mobile-galaxy-s2-t989-jelly-bean-uvli4-official-update-739:D
Sent from my SGH-T989 using Tapatalk 2

There has to be someone out there who can help me. No matter what I try I cannot restore it to a fresh flash or to stock. There has to be a method out there somewhere can help me with my dilemma. Thanks

sadakli2010 said:
There has to be someone out there who can help me. No matter what I try I cannot restore it to a fresh flash or to stock. There has to be a method out there somewhere can help me with my dilemma. Thanks
Click to expand...
Click to collapse
Try wiping cache and dalvik. Then format system, data, cache using cwm. Factory reset then flash new rom using cwm or odin.
Sent from my SGH-T989 using Tapatalk

[Q] Hyperdrive Installation problem

Hi guys, I've been trying to flash the new Hyperdrive RLS11 on my AT&T Galaxy s3 and no matter what I do, my phone says cant open and aborts the installation. I can never get the Aroma installer to start. I do factory reset, wipe cache, dalvik, and format system, but it fails every time. Any ideas?

Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?

xBeerdroiDx said:
Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?
Click to expand...
Click to collapse
I downloaded it from 3 different of his mirrors none of which worked. Im of the latest version of Clockwork mod. could it be the new update from 6.0.3 to 6.0.3.1 on clockwork? or should i use something other than clockwork

you should use twrp.. check the md5 of your download after you download it for accuracy. try that.. if it doesnt work u can always flash cwm again

Flash in twrp. Get twrp by downloading goo manager app and selecting install open recovery
Also are you grtiing a status 7 error?
Sent from my SAMSUNG-SGH-I747 using xda premium

For whatever reasons, sometimes when flashing in cwm or twrp, you will have issues and installing the other custom recovery will allow you to flash the desired ROM. you obviously then have the option to return to the custom recovery you were previously running either because you prefer it or all your backups were made in it.

Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

B.domonoski said:
Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Some ROm's are picky or you have a bad download. Issues with downloading that rom seem quite common. I tend to lean more towards android file host than anything.

i'm i nthe same situation for the past 2 days i have been trying to install it , i had the problem that after flash and reboot it will reboot back to recovery , today that seems not to be happening anymore now i'm getting stuck on boot animation and i have tried every step fix anytihng you can think of and no luck , i'm running now thw rls 10 with no problems but this rls 11 is driving me crazy i'm doing a redownload se if that helps in anyway

I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app

I used CWM without a problem
"You stay classy San Diego"

B.domonoski said:
I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
awesome. Glad it worked for you... it can be a picky, but gorgeous rom.

Similar problem
Hey guys
I've gone through all the steps as instructed, but can't install HD RSL15 successfully. I downloaded the installation file from a mac which then automatically unzips the folder. Zipped it back up with 7zip and threw it on the phone. I went through all the prescribed steps using TWRP 2.6 and AndroidUnite's video on youtube (How To Install TWRP Recovery And Flash Custom ROM) as example . This is the 2nd time Ive downloaded the file and I switched over from CWM based on this thread's recommendations.
When it comes to installing the ROM the window ends up looking like this:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip...
Updating partition files...
FAILED
Have I done something wrong during the previous steps (flashing, installing recovery) or does it have something to do with the method of zipping the files (tried fastest and store as compression options, doing store makes the file unreadable by the phone during recovery mode)? Please help

Error 7

Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:

What version of CWM are you using? Number, please.
Do you currently have a ROM on the phone? If you go into About phone from the system settings, what phone model does it say you have?

Its says I have SGH-T999
Sent from my SGH-T999 using xda app-developers app

Are you updating CWM with ROM Manager?
Factory reset, wipe cache, and you should be able to install any ROM without any issues.
Sent from my SGH-T999 using xda app-developers app

Yes I updated my CWM using Rom Manager
Sent from my SGH-T999 using xda app-developers app

I've had this happen many many times. Check the MD5. Its more than likely a bad download. Try re downloading it again.
Try transferring the download from PC to your phone. And try to flash again.
Sent from my SGH-T999 running Chihuahua v1 ROM

re: error 7 issues
CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
Most likely you tried to flash some rom which was not 100% compatible with your phone.
If you can get into CWM or TWRP recovery just do a factory reset/wipe cache/wipe dalvik cache.
Do NOT wipe or format SYSTEM . This should allow your phone to boot completly.
Be sure NOT to try flashing the same rom which gave you the error 7.
If you are still having problems then continue reading...
If you have a cwm/twrp backup (nandroid) of your previous rom go back into cwm or twrp
and restore your nandroid backup.
If you don't have a nandroid backup but you do have a proper zip file custom rom saved to your sdcard
then you can flash the rom making sure you first do a factory reset/wipe cache/dalvik and system.
After that you can start over again but be sure to make a nandroid backup first.
If you still have problems after doing the above you will need to ODIN flash the stock-rooted
Samsung Galaxy S3 T999 Jellybean v4.1.1 firmware.
P.S. You would NEVER get an ERROR 7 if you would only flash stock based "Samsung Galaxy S3 T999 Jellybean v4.1.1 custom roms"
instead of those CM/AOKP/AOSP or Ported roms.
Good Luck!

CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
First of all, make sure that you redownload the ROM, check that the MD5's match, and that you are indeed on the latest CWM recovery.
Secondly, I've heard of these status 7 errors, even when on the latest CWM recovery. There's times when installing certain ROMs where these errors occur, which usually happens when the ROM’s updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing and this portion of the script are called “asserts”. with this it prevents you from accidentally flashing a ROM intended for a different model.
Normally you can fix the issue by installing TWRP recovery but there's another possible solution for this if the TWRP method doesn't solve it but take some serious precaution. You need to be very careful and do this at your own risk.
Follow this step by step guide
http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
Following this will remove the asserts thus removing protection upon flashing the wrong ROM. Do if you choose to follow this make absolutely sure that the ROM you're flashing is for the T999.
Sent from my SGH-T999 using xda premium
---------- Post added at 01:57 AM ---------- Previous post was at 01:40 AM ----------
Status 7 errors can very well still occur through CWM recovery on stock based ROMs.. It mostly all depends on the ROMs updater script and if the dev accidentally made an error within that, which is why the asserts would normally correct that error by forcing the ROM to be flashed regardless.
Sent from my SGH-T999 using xda premium

Everyone, Thanks for helping me out, I flash back to stock firmware, I found out that I rooted my phone the wrong way (Qbking's Video). I tried rerooting but I used a different method and updated CWM, now works completely fine, Thanks for all your help!! :thumbup::thumbup:
Sent from my SGH-T999 using xda app-developers app