Develop Bugs

what's a good Android to PC via wifi application?

Hey guys.
I'm looking for a faster way to transfer files from my PC to my GNex. MTP is way too slow (2.5 gigs is looking to take about 3 hours) and I don't have the patience.
Is there a good wifi transfer app to do this for me? I am not good with networking, so easy would be good. I bought "wifi file transfer" from the market and it works good for single files. I need something that will do my whole internal SD in a single shot.
Halp?

Airdroid or ftpserver

rudeguy said:
Hey guys.
I'm looking for a faster way to transfer files from my PC to my GNex. MTP is way too slow (2.5 gigs is looking to take about 3 hours) and I don't have the patience.
Is there a good wifi transfer app to do this for me? I am not good with networking, so easy would be good. I bought "wifi file transfer" from the market and it works good for single files. I need something that will do my whole internal SD in a single shot.
Halp?
Click to expand...
Click to collapse
I am not sure that a WiFi transfer will be faster than using a wired transfer method. Try pulling the data using ADB

ahmadallica said:
I am not sure that a WiFi transfer will be faster than using a wired transfer method. Try pulling the data using ADB
Click to expand...
Click to collapse
I suck at adb
what command would I use? adb pull wholedamnthing?

rudeguy said:
I suck at adb
what command would I use? adb pull wholedamnthing?
Click to expand...
Click to collapse
Something like that, yes
Sent from my i9250

rudeguy said:
I suck at adb
what command would I use? adb pull wholedamnthing?
Click to expand...
Click to collapse
Check the last post here

https://play.google.com/store/apps/details?id=ch.ctrox.filepush
http://forum.xda-developers.com/showthread.php?t=1724143
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I use it all the time .

HELP my GNex stuck up on Google LOGO ADB doesnt work or computer wont recognize gnex

Yesterday at work while my phone is charging it just suddenly went to google screen and i waited for about 5-10 mins and still there, i thought its a minor problem...take out the battery and still stuck up, i went to recovery and accident wipe everything. My main problem is i have a Samsung Laptop and it wont recognize my phone, ( it will recognize for a second when i turn on my phone going to google logo and it will say device is malfunction etc etc. it will also recognize for a second going to recovery mode when pass the google logo and again it will say malfuction ) I tried ADB, but wont recognize my device because of the computer? I tried ODIN but still my device wont recognize by my computer. I tried Gnex tool kit, Rootkit and heres my device manager looks like
I hope someone can help me.

That looks like a problem with the drivers you have installed on your computer. It should show up under Android Phone and then have Android ADB Interface (or Samsung Android ADB Interface). Try installing the drivers from here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mwalt2 said:
That looks like a problem with the drivers you have installed on your computer. It should show up under Android Phone and then have Android ADB Interface (or Samsung Android ADB Interface). Try installing the drivers from here.
Click to expand...
Click to collapse
I download it and how can i use this one?

benjiebench said:
I download it and how can i use this one?
Click to expand...
Click to collapse
Install samsung kies.you just need driver from kies. Dont open samsung kies when you want to use adb.
Sent from my GT-I9300 using xda premium

Samsung kies on a Galaxy Nexus ??? Put the phone in adb mode and manually install the ADB interface drivers from the google SDK. You will need to uninstall and erase all previous drivers from the device manager and then install the .inf from the sdk
Sent from my Nexus 4 using xda app-developers app

[Q] How to get bricked kindle fire recognized on computer?

As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlybelle said:
As of now, I'm trying to unbrick my kindle fire 1st generation, but my computer isn't recognizing it as ADB, only as Android, is there anyway to get it recognized as ADB so I can install twrp and flash a rom?
Click to expand...
Click to collapse
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app

404-Not Found said:
Try updating the driver in driver settings. That was the problem with my PC once. I just updated and ADB was recognized
Sent from my Amazon Kindle Fire using xda app-developers app
Click to expand...
Click to collapse
Nope, but thank you anyway, the problem is that my kindle fire has no os and it's just stuck at the stock boot up screen without any recovery...

You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.

mr_verystock said:
You need a Fastboot cable/adapter/etc.
You can make one yourself by soldering 4th contact/the one with the missing spot to the 1st contact (red wire/power wire).
And then you can use whatever to recover.
AND make sure you use Kindle Fire FIRST GENERATION SOFTWARE. OTHERWISE YOU WILL BRICK AGAIN, AND THEN, COMES JTAG.
Click to expand...
Click to collapse
Okay thank you!

I got a red triangle on my kindle fire HD 7, got factory cable too but doesn't work

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I got plugged the factory cable in and the screen diaplayed "fastboot kindle fire" as expected . However, when I used this tool http://forum.xda-developers.com/showthread.php?t=1951254 the newest one (KFHD_SRT_v1.3.5- 7.3.0 (seperate option for restoring factory recovery) )
the tool only displayed waiting for the devices , also I chose the first and third option, same thing happed help me guys.

I'm guessing your fastboot drivers aren't installed, look for a device with an yellow triangle in the device manager probably called tate , might say jem or otter2, and tell it to update drivers and point it to where you would have downloaded and extracted the drivers in my signature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
I'm guessing your fastboot drivers aren't installed, look for a device with an yellow triangle in the device manager probably called tate , might say jem or otter2, and tell it to update drivers and point it to where you would have downloaded and extracted the drivers in my signature.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
Oh thank you for replying. I got everything fixed. However, I want to flash CM11 on it. I have TWRP 2.6.3.1 and the ROM in the internal storage. I followed the instruction: install newest custom recovery, factory reset and flash the rom. TWRP fail at the flashing rom part. it said something about blaze tablet and otter2 I don't know.Can you help me.

You tried to flash a kf2 ROM on a kindle fire HD 7", they aren't compatible. You need to download the correct ROM in the 7" HD development section.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

stunts513 said:
You tried to flash a kf2 ROM on a kindle fire HD 7", they aren't compatible. You need to download the correct ROM in the 7" HD development section.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
thank you so much. IT works perfectly.

USB OTG not recognizing

Hi! I've recently bought my nexus 7 (flo) but, no matter what I do it just won't read my USB. I've already tried nexus media importer and stickmount rooted and non-rooted and even installed elementals kernel. Please help, here's a screenshot attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Anyone can help?

dnle71 said:
Anyone can help?
Click to expand...
Click to collapse
USB flash drive I am assuming? What format is the drive using?

I've tried mainly on fat32 and recently tried ntfs(tried to reformat) but it still does'nt work.

dnle71 said:
I've tried mainly on fat32 and recently tried ntfs(tried to reformat) but it still does'nt work.
Click to expand...
Click to collapse
Tried a different OTG cable or different drive? I know a bad cable can cause issues.

Not yet(I don't have another one) but, I have used my dual otg flash drive and it works in recovery mode but not working on paranoid android.

Hello! Im back, my otg is now recognized using es file explorer with this address "usb://1002/NEXUS7".

dnle71 said:
Hi! I've recently bought my nexus 7 (flo) but, no matter what I do it just won't read my USB. I've already tried nexus media importer and stickmount rooted and non-rooted and even installed elementals kernel. Please help, here's a screenshot attached.View attachment 2845242View attachment 2845244
Click to expand...
Click to collapse
Try flashing a different kernel let me know if it helps.
Sent from my Nexus 7 using XDA Premium HD app

I know of an app called nexus media importer and apparently it let's u I'm port from USB drive. Could this help?
sent from my flo using xda
---------- Post added at 04:24 PM ---------- Previous post was at 04:00 PM ----------
I could also be the fact that you are running android L. The os has quite a lot of comparability issues (although I'm not sure if its just a theme or not)
Sent from my Nexus 7 using XDA Free mobile app