Related
Hi guys,
I did something very stupid and it seems I've bricked my arc for good
My Arc had unlocked bootloader and was on rooted 2.3.2. When the phone found firmware OTA update, I chose to download it, then the phone rebooted and started installing new firmware. After a minute or so, it turned off and that was the end, it's not possible to turn it on any more. The led won't even lit up. Is there anything I can do to revive it ?
Arrrgh, this exact same thing happened to me, I woke up and it said there was software update available (I have unlocked bootloader and rooted 2.3.2)
I blame still being mostly asleep on hitting ok. Now I have a brick!
Some more info.
I've tried pulling the battery and putting it back in, It still won't power on.
I've tried holding down menu and plugging it into USB to reflash it and the blue light doesn't come on.
Sorry to hear that, and many people have this problem: http://forum.xda-developers.com/showthread.php?t=1106250
Can't update firmaware through OTA after unlocking bootloader
Sorry to hear about your phone
I always turn of the "auto check for updates" thingy on android. Learned the hard way on my Desire when it got updated to Froyo over OTA and had to wait a while for root lol.
Anyway,SE provided the info to unlock the bootloader and that an OTA coming from them bricks the phone is kinda silly. Far as i know u can't update through SEUS (might be wrong) when it's unlocked and it would be a nice idea maybe to not be able to install the OTA update either.
Mano1982 said:
Sorry to hear that, and many people have this problem: http://forum.xda-developers.com/showthread.php?t=1106250
Can't update firmaware through OTA after unlocking bootloader
Click to expand...
Click to collapse
Jerpelea has posted an unbrick (softbrick) package, can anyone test if this can unbrick the device?
http://forum.xda-developers.com/showthread.php?t=1116970
magnumhex said:
Jerpelea has posted an unbrick (softbrick) package, can anyone test if this can unbrick the device?
http://forum.xda-developers.com/showthread.php?t=1116970
Click to expand...
Click to collapse
won't work if you can't get it into flash mode.
Can't you get it into Fastboot mode (give it a few hours charge..) then pull the battery for 30 seconds...
then hold the menu button while plugging the usb cable in... should (in theory) go into fastboot mode - then you can fastboot flash a fresh system.img
im_iceman said:
Can't you get it into Fastboot mode (give it a few hours charge..) then pull the battery for 30 seconds...
then hold the menu button while plugging the usb cable in... should (in theory) go into fastboot mode - then you can fastboot flash a fresh system.img
Click to expand...
Click to collapse
Tried - no help though. Any other ideas? Or just to go and buy a new one?
By the way, did the same thing: my Arc LT15i has/had unlocked bootloader, rooted 2.3.2 (first firmware) and is/was 3.0.A.2.181. While preparing to try to lock bootloader in order to use SEUS and upgrade firmware, I've connected the phone which asked me to check for the updates and found T-mobile update (approx. 40Mb). Asked to dowloand and an idiot pressed "OK". And now, everything is black - just as the mask of the phone is.
The green light just blinks when the "power on" button is pressed, or charger is plugged in.
Can't it be unbricked with flashtool?
Sent from my LT15i using Tapatalk
[UPDATE] to my previous post:
Steps I have done:
1. Charged the battery for 4-5 hours
2. Flashed my Arc using the manual for flashing by @Step666
3. The progress went well and at the end there was a message:
"INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging"
I have tried to turn on the phone. There was a small vibration as when you're turning on the phone (note: before flashing there was not even this vibration when pressing power on button), but the screen remains black.
Any ideas for next step(s)? Thanks for trying to help!
spngbby said:
[UPDATE] to my previous post:
Steps I have done:
1. Charged the battery for 4-5 hours
2. Flashed my Arc using the manual for flashing by @Step666
3. The progress went well and at the end there was a message:
"INFO - Now unplug the device and power it on
INFO - Then go to application settings
INFO - turn on Unknown Sources and Debugging"
I have tried to turn on the phone. There was a small vibration as when you're turning on the phone (note: before flashing there was not even this vibration when pressing power on button), but the screen remains black.
Any ideas for next step(s)? Thanks for trying to help!
Click to expand...
Click to collapse
Anyone found any solution??
Thanks
Try to repair it with pc companion. I had the same pb and this manip fix it.
Solved
lenathou972 said:
Try to repair it with pc companion. I had the same pb and this manip fix it.
Click to expand...
Click to collapse
This solved my bricked arc
sorry for spaces b/w link
talk. sonyericsson .com /thread/ 24813
How can you repair a bricked phone with pc companion? Dont u need the phone to be booted and running?
No, but it will need flash mode. Hold back button while plugging in usb to pc. If not recognized, use Wotan server.
Sent from my LT15a using xda premium
tenca1 said:
Anyone found any solution??
Thanks
Click to expand...
Click to collapse
Did you find a solution to this i got the exact same thing
djc
djc151084 said:
Did you find a solution to this i got the exact same thing
djc
Click to expand...
Click to collapse
Found the problem myself, after sliding up the little black test point cover, it interfered with the screen, so holding the top left corner tight enabled the screen, so shook the phone a bit and it's fine now, must have been wedged somewhere it shouldn't have been.
Djc
Sent from my CM9 ICS MB525
Ok after my sony ericsson xperia play did the software upgrade while on the charger, it will not boot back up!!
Not sure what happend, but when you press the power button, it only vibrates once but will not boot back up!
It just shows a black screen!!!!
I have sent it in to the shop and we are stuck as to how to get it on.
You can not even get into the boot loader screen!
Its been a week, and i don't know what the hell to do!!!
Some one please help!!!!
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Yes it dose, the tech guy and me have tried to do so, however the computer sees the device but dose not know what it is, however even when the files are finished it sitll dose not boot up!
jacklebott said:
Does the power button light up green when you hold down the search button while plugging into a computer? If so, use flashtool to flash back to the stock firmware
Click to expand...
Click to collapse
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
It dose not light up blue, but it dose not go into the recovery screen at all, in fact when you press the power button, gives a small vibrate and the screen is still black!
Also when you put it on the charger the LED light is green, really frustrated.
However, I am new at this, like I said only had the device for a day, and this happened after I did a software update, so I am not sure what a CWM means, kindly clarify, think of giving instructions not just to a newbie, but to some one that has no clue what is going on! LOL sorry man I really am new to all of this, I just want it to work, so kindly provide me with step by step instructions that you would give to a five year old child.
Hmm... that's interesting. A CWM is a custom recovery. Green light when plugged in means its charging. It sounds almost like your phones LCD is not receiving a signal anymore, if that's the case, seeing as you wouldn't see anything on the screen in order to even do a recovery, I don't see a lot of options here. If its brand new, then its under warranty, take it back and exchange it.
Sent from my R800x using XDA App
This has nothing to do with your LCD =|.
It's sony's stupid software bricking the xperia play for no valid reason ; happened to me as well.
Only fix is to download Sony Ericsson Update Service and keep on retrying the software update after it fails ; This is not the Sony Ericsson Pc Suite ; Also try removing the battery for 30 seconds after 6-8 retries on SEUS - happened to me a few times after the original occurence since i was trying to get back to complete stock.
Thanks for the input, I was lost on how to help out on this one! I thought it was only bricking the rooted unlocked phones.
XperianceIT
sent from my Xplay R800X, using XDA App!
Thanks, so I need to use the update app from Sony Ericsson?
I will try it, however would it work after I flashed it ?
I did a few times and it took the flash files, yet still wont boot up.
XperianceIT said:
If it lights up green then you cant get into fastboot, it should light up blue, if im not mistaken!
Is your phone Rooted, with BL Unlocked, and do you have CWM Recovery? You said you can not get into Bootload screen? Did you mean Recovery? Try pushing volume down repeatedly while pressing the power button, continue hitting volume down till you see the recovery screen. If you can get into recovery just do a nandroid recovery/restore, provided you did a back up prior to your issue.
Click to expand...
Click to collapse
I wasn't trying to get him to use fastboot (blue light), I was saying to go into flash mode (green light)
Its still not booting up and the pc is now saying it dose not recognise my device!!
What to do????
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
Connect it to your PC with USB, Then go to support Zone in Pc Companion then select Phone software update and click Repair and follow the instructions, it worked for me when pc companion decided to brick me...
EDIT: Or you could always Flash 2.3.4, tut here: http://forum.xda-developers.com/showthread.php?p=20151540 just follow the first two posts, I believe it will work if Flashmode is still working (The tut will tell you how to get into there)
correct me if I have said anything wrong, was in a rush.
djskittel said:
What do you mean by flash mode????
How do I connect my device to the PC since the PC is saying that the USB device connected is not recognised?
Click to expand...
Click to collapse
When you connect the phone to the pc does the led stay green, if it does that's called flash mode , keep.on tryimg seus to flash the phine, this is not included in pc companion and is separate software
Sent from my R800i using XDA App
This happened to me to, so you are saying I should use SEUS to update over and over until it works?
---------- Post added at 09:32 PM ---------- Previous post was at 09:27 PM ----------
Nabeel_Nabs said:
As long as you can get into flash mode(green light, when you connect to pc) you're ok, wel re trying on seus and eventually it will work
Edit- it can take around 10 retries in my experience
Sent from my R800i using XDA App
Click to expand...
Click to collapse
Should I do an update or the reset and update option in SEUS?
So, i have update my ion to ICS LT28h, my wife's ion we waited for the official AT&T update. I downloaded PC Companion, connected the phone, started the update process. I did all i was told on every screen. the phone never updated and now does not power on. no lights when plugged in to charge or connect.
help?
Wrong Section
wrong section
1) hold the power + volume down for like 15 secs...(untill you feel a vibrate)
2) download flashtool at http://androxyde.github.com/
-----Install
3) download whatever FTF you want at http://forum.xda-developers.com/showthread.php?t=1752345
----move it to C:\Flashtool\firmwares
make sure drivers are installed(find them in C:\Flashtool\drivers
4) Launch Flashtool
5)select the thunderbold
----select the ftf
6)insert the micro usb end into phone (leaving the regular usb out of computer)
----it will tell you some instructions on how to flash but they are for different xperia phone
7) while holding the volume down button while the phone is off (From step 1)
insert REGULAR usb into computer
it should say flashing, or your comp might say installing driver, or it might just say drivers not installed..
ONLY IF YOU CHOOSE TO INSTALL LT28H FTF--------------repeat this step but now install the file from (FOR LTE)
-----------------http://forum.xda-developers.com/showthread.php?t=1815636&highlight=lte
--------------------(just scroll down) (was too lazy to give dl link) XD
8) if it works, thank me XD
trf000 said:
So, i have update my ion to ICS LT28h, my wife's ion we waited for the official AT&T update. I downloaded PC Companion, connected the phone, started the update process. I did all i was told on every screen. the phone never updated and now does not power on. no lights when plugged in to charge or connect.
help?
Click to expand...
Click to collapse
If it is an AT&T phone do you really want to update to LT28h?
why not install lt28h
all you have to do is just flash the extra ftf
and then just change the APN
which i as well as spectre have posted
http://forum.xda-developers.com/showthread.php?t=1770813
The att version works fine has root and cwm
Sent from my LT28at using xda premium
424aca said:
why not install lt28h
all you have to do is just flash the extra ftf
and then just change the APN
which i as well as spectre have posted
http://forum.xda-developers.com/showthread.php?t=1770813
Click to expand...
Click to collapse
No reason to use the LT28h anymore since the LT28i and LT28at both have ICS and root.
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Ruler85 said:
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Click to expand...
Click to collapse
What model are you working with? And where did you get this prerooted image (the one you tried to flash)? From the link you posted I don't see one for the ion. Anyway, based on my own soft brick experience, you'll prolly need to let the phone battery drain, then charge (process can take a day or so), then try and flash your stock FTF via Flashtool.
Ruler85 said:
In hope that someone's still looking at this thread, here is my situation: I tried flashing a prerooted image via fastboot and landed in a Sony bootloop. Then somehow I was stuck in fastboot-mode (led: static blue) and let the phone drain its battery. Now I'm able to get into flashmode but when flashing the chinese FTF with the Flashtool it stops at 1% with status "Processing .......sin" (sorry don't know the file exactly).
When I'm trying to power it up now the Sony logo comes up followed by an exclamation mark in a triangle... could you tell me what options there are left? I saw these prerooted images (http://forum.xda-developers.com/showthread.php?t=1669906), but there is none for the Ion, so I don't know what could be the next step. If I just had back my normal system... I used to flash my Galaxy S many times so I'm not that unexperienced, but it seems I really have a problem here:crying:
Any help is appreciated!
Click to expand...
Click to collapse
Try using SUS to do a repair of the phone.
Ruler85 said:
In hope that someone's still looking at this thread.
Any help is appreciated!
Click to expand...
Click to collapse
I have had the 1% happen to me. I just unplug phone close and reopen flashtool and try again. Took me 3 times to get to flash once.
If still no luck, like spectre51 said use repair option in pc companion.
If all else fails use this thread
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my LT28i using xda app-developers app
ToledoJab said:
I have had the 1% happen to me. I just unplug phone close and reopen flashtool and try again. Took me 3 times to get to flash once.
If still no luck, like spectre51 said use repair option in pc companion.
If all else fails use this thread
http://forum.xda-developers.com/showthread.php?t=1849170
Sent from my LT28i using xda app-developers app
Click to expand...
Click to collapse
Thx for your hints! It is kinda frustrating to wait until it is fully loaded, then try flashing, then load and wait again... but the 1%-bug seemed to be a major bug as it is fixed now in the new version 0.9.8 of the flashtool.IGonna tray again tomorrow and report my status. I already checked popfan's thread to get a point if mydevice really is bricked or not. So again thanks to all of you!
Just out of curiosity: is there a possibility to flash a prerooted ftf-file? I live in Switzerland where I bought the lt28h version. And I haven't found a prerooted. img file for flashing via fastboot. Just want to root it, custom roms etc. later
Alright, I was able to flash the chinese FTF and got my phone back working:laugh:
But I had to install the newest version 0.9.8 of the flashtool to not get the 1%-bug again. After this roooting via bin4ry's script worked well and now I'm happy happy happy. Thank you all!
I also had problems with flashtool 9.7. I used 9.0 with no problems. Didn't know about 9.8.
Sent from my LT28at using XDA
as the OP of this thread, thought i'd update. After reading a few threads i discovered the power/volume button trick. tried volume down with no luck, but power and volume up worked. PC Companion did not work in upgrading the phone. just kept telling me to disconnect my battery, and that if the batter cannot be disconnected to skip that step. But it wouldn't go to the next step. So I tried SUS. Worked perfectly.
So, My phone is running lt28h and my wife is on lt28at. There are some differences in the way data is downloaded. looking at my AT&T bill, the data downloads, i assume for apps that get updated, seem to be different sources. also my phone has significantly larger downloads even though we have similar apps. I do have a couple of weather apps she doesn't have that might be responsible for that.
I'd like to do some additional comparisons, but think i'll be flashing the AT&T rom on my phone soon.
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Been doing flashtool ftf recoveries whenever this occured. Do not power on arc s with it stuck. let flashtool self boot to flash mode and you will be back in buisness again.
Sent from my GT-P6800 using xda app-developers app
if you could tell me what to do a bit more precise I'd really love you! like a small guide
I assumed you have flashtool since you mention about kernel downgrade. if no get it installed
the step actually same as flashing the kernel with phone power off.
reference link to a online guide
http://www.thespicygadgematics.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Sent from my GT-P6800 using xda app-developers app
Sparfen said:
if you could tell me what to do a bit more precise I'd really love you! like a small guide
Click to expand...
Click to collapse
1. Flash ready to rood ics 562 with flashtool. Here's a youtube tutorial.
2. Root your phone
3. get cwm and follow these steps to install custom rom with locked bootloader
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install custom rom from sd card without rebooting
works every time for me
TRY THIS!
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
ok first since ur stuck flash back to stock using flash tools n then follow the procedure.. i had a similar problem n i fixed it.. it was a very simple prob.. for installing these custom roms u ve to format system/ , so if ur using the cwm app by pvyparts ul loose the cwm after wiping it.. all u ve to do is after flashing the custom rom ul ve to install CWM back (use cwm version 5 available in the thread by pvyparts.. not the latest one..)
here's the thread for CWM
n post back if it works..
Thanks guys, really appreciate it, will try these methods out.
Still won't work
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Sparfen said:
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Click to expand...
Click to collapse
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
jader13254 said:
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
Click to expand...
Click to collapse
Yeah, that I know and that's what I'm doing. When I hold down the back key and connect to the pc all that happens is that the green led lights up. Flashtool won't recognise it and it still says that I should hold down the back key and then connect to the PC...
http://forum.xda-developers.com/showthread.php?t=1126358
XperienceD said:
http://forum.xda-developers.com/showthread.php?t=1126358
Click to expand...
Click to collapse
Thanks but flashtool won't recognise it and i have a locked bootloader.
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
This happened to me once, if i remember right, i've used the repair phone option in sus ( since my phone cannot be recognized i did the click your phone option) it did not repair my phone since sus said i have the latest version installed BUT then i pulled out my battery, reinsert it; open flashtoool, clicked flashmode and entered it successfully
Sparfen said:
Thanks but flashtool won't recognise it and i have a locked bootloader.
Click to expand...
Click to collapse
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
THANK YOU!
jman2131 said:
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
Click to expand...
Click to collapse
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Which rom u flashed??
Sparfen said:
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Click to expand...
Click to collapse
I was also stuck at Sony logo and it reboots every time just after sony logo. Then i used flashtool, flashed using "LT15i_4.1.B.0.587_Kernel.ftf".....
Now it boot further, but only to XPERIA logo, and then reboots....but certain times i have seen it getting past the logo, like it shows a display asking for pc companion, even the taskbar too with time and blutooth icon on it....but all of a sudden it reboots. i have tried rebooting more than a 100 times, while taking out battery everytime.
Also, I'm not able to get into recovery mode. I tried this using the combination of power on, and when sony logo appears, pressing and releasing volume down repeatedly. I hope i'm doing right.
So what should I do?? am not able to use this phone for a week...
Please help me out.
Ok got it working. I just unlocked the boot loader from sony bootloader site(sorry couldn't post the link, because of low post count)
So, it booted up but show error as soon as put a sim, that "Unfortunately keypad has stopped working".
I figured out the culprit, it is the build version with i flash it. I reflashed it with LT15i_4.1.B.0.431_kernel.ftf, now it working fine like a charm.
So much relief...!!
Hope this may help someone too...so i shared!!!
Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
iamdumps said:
Hi,
First time poster here. I've done a lot of searching to find people with the same problem but can't. Sorry if it's out there and I've missed it.
Essentially I’m worried that I’ve bricked my Xperia S (running ICS). My problem is this:
First I rooted using this link: http://www.xperiagamer.com/Beginners-Guides/rooting-xperia-s.html
Then I installed CWM Recovery using the RecoverX project: http://forum.xda-developers.com/showthread.php?t=1773227
Then I tried to flash cyanogenmod 9 but failed.
I saw somewhere that it mught help to flash XTXperience so I did that. This failed and my Xperia S boots up to the Sony sign then fails and starts again just cycling through.
I can't get in to fastboot mode via CWM or otherwise. When plugged in to the laptop it is recognised but the computer can’t find the drivers (I've tried to instal manually) and then the phone reboots so the computer can no longer see it.
Can anyone help please??!!
Thanks
Dumps
Click to expand...
Click to collapse
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
HooLIMAN87 said:
Firstly he need to unlock his phones bootloader.
Sent from my Xperia S using xda app-developers app
Click to expand...
Click to collapse
Ofcourse
patato800 said:
Keep pressing Unlock key + Volume Down key until you get 3 vibrates.
The phone is now off and you can connect it into flashmode and reflash your ics firmware.
The other thing you can do is going into CWM and wipe data and cache (that worked once for me when I had a bootloop)
--> you will lose all your data.
For CM you first have to install the kernel via fastboot and then go into CWm and flash the CM.zip file.
Click to expand...
Click to collapse
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
iamdumps said:
Thanks but that doen't seem to work. All i can get it to do is turn off with power and volume up. When it comes back on again it just cycles through again.
Can't get it to communicate with the computer at all - it recognises it but can't find drivers. then the phone disconnects itself in the reboot.
Click to expand...
Click to collapse
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
patato800 said:
Did you try to connect it in flashmode? (Hold volume down and plug it into your pc after shutting it down)
Click to expand...
Click to collapse
Yes I can connect to flashtool in flash mode. Sorry I'm a bit lost on where to go from here. All help greatly appreciated at this point.
If you can find a way to copy a ROM file into the fone we can flash it. The fone isnt being recognized by the PC , but the CWM works and it cannot mount as a USB Storage as some lunfile is missing . I am also on the same page and struggling for hours
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
It worked , Finally , thank you so much .
patato - thanks mate, will get on it and cry if I have any more questions. :laugh:
sarandeep - good work!!
patato800 said:
Download the latest .55 firmware (it's in the general section) and flash it using this guide :
http://forum.xda-developers.com/showthread.php?t=1725078
- It teaches you how to use flashtool
Click to expand...
Click to collapse
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
iamdumps said:
Sorted! Thanks patato. Now to consider that cyanogen upgrade again...!
Click to expand...
Click to collapse
Search youtube on how to unlock the bootloader and install CM10 there is one very good video but i can't give the link now as I'm on my phone
Glad I helped you ;D
Sent from my Jellybean Xperia S!
A tip for the newbies out here:
Read everything carefully. Chances of bricking a Sony device is quite low because of Sony's dev support but you will have moments of anxiety and lots of torn hairs. As a way to start, please go through all the top stickied posts in the Dev section and understand what are the many processes happening. It doesn't take more than a couple of hours to go through them but in the long run, helps you to enjoy your device better. Hope you will have a good time with the S