Develop Bugs

Problem flashing another FW (.62)

I plugged in my phone in fastboot mode and used flashtool to flash a .62 fw in order for me to get jokawild v3. It was flashing really slowly and after 2 hours it was up to 19%. So I left it over night. Today in the morning when I looked at it, there was a red light flashing on my phone and flashtool said that the flashing has been aborted. Here is a log from flashtool.
So why did it take frickin long and how do I really flash a fw. I though I was doing the right steps.
EDIT = When I try to turn on my phone, the Sony Ericsson logo comes up although after that, a picture with a phone and exclamation mark appears and it keeps on repeating. PLEASE HELP. HAVE I BRICKED MY PHONE!!???

You were connected in fastboot mode you only need that to flash kernels and such. You need to be connected in FLASH mode when flashing a new firmware. With your phone turned off and when your prompted hold the BACK button and plug in the usb cable, the led will turn GREEN which is flash mode and flashing should begin as normal
Sent from my R800a using XDA App

yes, im pretty sure i did hold the back button when plugging it in. This is what I did: Connected the phone by holding the back button and plugging it in (a green LED light appeared on my phone). opened up flashtool. Drag and dropped the .62fw on flashtool and thats it. it started flashing the fw.
Btw, is my phone bricked, am i able to get it back to normal (i forgot to make a backup on my stock rom)

im just flashing it again hopefully it'll be quick and also why did it take the whole day and still not be completed?
And how long does it take?
According to this http://www.theandroidsoul.com/tutorial-how-to-flash-a-firmware-using-flashtool-on-xperia-arc/ website, when he was flashing it, and it took him approx 3 minutes (if you look at the time logs). So why is mine taking soooo long?! Sorry if im impatient. Is it because I didnt untick anything when i insertd the .ftf file in flashtool?

I just got the same message again. Look in attachement. So what is the problem? Am i setting it up right?
Whenever i browse to find the fw using flashtool, these are the settings (look in attachment). What am i supposed to do? Am i supposed to keep those settings?
Can someone please help. I dont want to brick my phone. Whenever I turn on my phone, it keeps showing the SE logo and then a phone with an exclamation mark appears. This keeps on looping. Can someone please help. Thanks.

Have you tried an earlier version of flashtool? Is the battery at least 50% charge? Are all the drivers properly installed?
Sent from my R800a using XDA App

Yes I have tried earlier version of flashtool. And i also tried flashing another ftf FW. Still same thing. I dont know if the battery is charged although i think it is since I left for for charge for approx 4 hours (and it can get to 100% in 4 hours). I think all the drivers are installed. I did have trouble installing the drivers so I just put the drivers in my desktop and pointed out to them when I was manually installing the drivers for my phones bootloader to be unlocked...

Fastboot drivers are different from flashtool drivers, check in the flashtool install folder you'll see a drivers folder try to reinstall those
Sent from my R800a using XDA App

I clicked on flashtool-driver.exe (it was in the driver folder in the flashtool directory) and installed all the drivers. Hopefully it will work now when i flash .62 on it although its still taking long. When it gets up to 23% when its flashing system.sin, it gives an error. why? and how long does it normally take to flash a FW?

I just attached the log. It didnt even work this time... WHY?!?

Should I try and flash it on a laptop instead of a computer? If yes, then can someone tell me how to PROPERLY set it up as I dont want to mess this chance up

[Q] Xperia Arc won't boot after CWM crash

I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?

Been doing flashtool ftf recoveries whenever this occured. Do not power on arc s with it stuck. let flashtool self boot to flash mode and you will be back in buisness again.
Sent from my GT-P6800 using xda app-developers app

if you could tell me what to do a bit more precise I'd really love you! like a small guide

I assumed you have flashtool since you mention about kernel downgrade. if no get it installed
the step actually same as flashing the kernel with phone power off.
reference link to a online guide
http://www.thespicygadgematics.com/2012/06/how-to-fix-bricked-sony-xperia-android.html
Sent from my GT-P6800 using xda app-developers app

Sparfen said:
if you could tell me what to do a bit more precise I'd really love you! like a small guide
Click to expand...
Click to collapse
1. Flash ready to rood ics 562 with flashtool. Here's a youtube tutorial.
2. Root your phone
3. get cwm and follow these steps to install custom rom with locked bootloader
make sure in cwm before installation
1. Wipe data/factory reset
2. wipe cache partition
3. go to mounts and storage menu and\
4. format /system
5. format/data
6. format cache
7. exit mounts and storage menu
6. go to advance
7. wipe dalvik cache
8. wipe battery stats
9. exit advance
10. install custom rom from sd card without rebooting
works every time for me

TRY THIS!
Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
ok first since ur stuck flash back to stock using flash tools n then follow the procedure.. i had a similar problem n i fixed it.. it was a very simple prob.. for installing these custom roms u ve to format system/ , so if ur using the cwm app by pvyparts ul loose the cwm after wiping it.. all u ve to do is after flashing the custom rom ul ve to install CWM back (use cwm version 5 available in the thread by pvyparts.. not the latest one..)
here's the thread for CWM
n post back if it works..

Thanks guys, really appreciate it, will try these methods out.

Still won't work
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.

Sparfen said:
I tried doing all the different things you said but the phone won't boot holding in the back button and inserting the datacable. The light on the side turns green but nothing else happens.
Click to expand...
Click to collapse
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)

jader13254 said:
Mate, press the back button while you connect to PC and flashtool will show "device connected in flashmode" than select a firmware to FLASH and FLASH it. After the process is done disconnect and power it on... =)
Click to expand...
Click to collapse
Yeah, that I know and that's what I'm doing. When I hold down the back key and connect to the pc all that happens is that the green led lights up. Flashtool won't recognise it and it still says that I should hold down the back key and then connect to the PC...

http://forum.xda-developers.com/showthread.php?t=1126358

XperienceD said:
http://forum.xda-developers.com/showthread.php?t=1126358
Click to expand...
Click to collapse
Thanks but flashtool won't recognise it and i have a locked bootloader.

Sparfen said:
I am new at all this stuff but i think I'm starting to somehow get a hang of it. I rooted my phone this week running .587 by downgrading the kernel etc, you know. Today I wanted to try another rom so I followed this guide: http://forum.xda-developers.com/showthread.php?t=1955248 To install Xperia Ultimate HD on my phone with a locked bootloader.
However during step 8 CWM shut down and started to boot. But it doesn't start and I'm unable to get back into CWM My computer won't recognise the phone so I can't flash the kernel or do a complete reset using SUS. What do I do? is it save:able?
Click to expand...
Click to collapse
This happened to me once, if i remember right, i've used the repair phone option in sus ( since my phone cannot be recognized i did the click your phone option) it did not repair my phone since sus said i have the latest version installed BUT then i pulled out my battery, reinsert it; open flashtoool, clicked flashmode and entered it successfully

Sparfen said:
Thanks but flashtool won't recognise it and i have a locked bootloader.
Click to expand...
Click to collapse
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S

THANK YOU!
jman2131 said:
Odd, because flashtool skills recognise it. Try pulling out the battery and reinserting it and connecting
Sent from Xperia Arc S
Click to expand...
Click to collapse
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!

Which rom u flashed??
Sparfen said:
OMG! I pulled out the battery and left it out for a while and then flashtool noticed it and i was able to flash in a generic rom! Thank you!
Click to expand...
Click to collapse
I was also stuck at Sony logo and it reboots every time just after sony logo. Then i used flashtool, flashed using "LT15i_4.1.B.0.587_Kernel.ftf".....
Now it boot further, but only to XPERIA logo, and then reboots....but certain times i have seen it getting past the logo, like it shows a display asking for pc companion, even the taskbar too with time and blutooth icon on it....but all of a sudden it reboots. i have tried rebooting more than a 100 times, while taking out battery everytime.
Also, I'm not able to get into recovery mode. I tried this using the combination of power on, and when sony logo appears, pressing and releasing volume down repeatedly. I hope i'm doing right.
So what should I do?? am not able to use this phone for a week...
Please help me out.
Ok got it working. I just unlocked the boot loader from sony bootloader site(sorry couldn't post the link, because of low post count)
So, it booted up but show error as soon as put a sim, that "Unfortunately keypad has stopped working".
I figured out the culprit, it is the build version with i flash it. I reflashed it with LT15i_4.1.B.0.431_kernel.ftf, now it working fine like a charm.
So much relief...!!
Hope this may help someone too...so i shared!!!

[Q] R800i completely bricked?

Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.

Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at

eksasol said:
Well I always update to the latest working kernel when I flash a new rom. The one working currently for me is fxp152 kernel.
Have you tried with battery, holding the search button, plug it in, then hold the Power button while still holding search.
Contact Alejandrissimo, he can probably help you.
Sent from R800at
Click to expand...
Click to collapse
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!

same boat
ThirtyOne34 said:
Thank you for the response! Where do you find these kernels? Are those boot.img files included with fxp zip files the kernel images?
I hadn't tried to hold the power button after holding search button + plugging it in, but it doesn't work either
I will probably contact Alejandrissimo in a couple of days if I can't solve it myself or if nobody else can help me solve it...
Thank you!
Click to expand...
Click to collapse
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy

try this it works
tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.

Qshusb error
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...

Rmontoya83 said:
Pull the battery out put it in close the cover plug usb then hold power button and flashtool from androxide should detect it.
Click to expand...
Click to collapse
You clearly have no idea what you are talking about. i have read you say this over and over again and yet it doesn't work. you need to press back not power.

tommyforest123 said:
Hi, i have the exact same problem. Is there anything that can be done ... phone is totally dead, and everything is the exact same as you mentioned..
thanks
Tommy
Click to expand...
Click to collapse
tommyforest123 said:
Hi,
Can anyone help. Basically my phone is hard bricked. No logo, no flashmode or fastboot recovery. Totally dead. When i connect to pc - I get QSHUSB DLOAD error, the pc wont recognise my phone. I have tried flashtools but, I cant enter into flashmode ( holding down back while connecting usb...I know how to fix it if i can get my phone back into a softbrick.( getting the sony logo - being able to enter flashmode )..anybody have any ideas please. I have searched online for days with no answer. Xperia play 1 week old running 2.3.4. - i tried to install ics 4.0.4 gamer rom but pressed the flash x10 rom in flashtools by mistake ...
Click to expand...
Click to collapse
Hi Tommy,
I am very sorry for my late response. I haven't fixed my phone yet, but I fear only a hardware flash would work... I think I am going to try to get my phone back to the store where I bought it and I hope they'll fix it. If they don't, I will try to find someone who can hardware flash or ask Allejandrissimo (an Xperia bricked devices expert, it seems...)
I hope you will get your phone to work again! (And please let me know how you did it if you succeed). I will keep you updated if there is any progress. I am very busy at the moment though, so I don't know when I can get my phone back to the store. In the meantime, I have also bought a used Galaxy Nexus...
Greetings,
Sven
EDIT: I think I also accidentally flashed the X10 rom or kernel in the flashtool...

Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app

nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
Well, the problem is we can't enter flashmode or fastboot... Really no life to it...
But thanks for the input!

hi guys, ive rooted n unlock boot loader for my friend xperia PLAY with android 2.3.3 stok, after 2days he update his phone to 2.3.4..... now his phone did not reboot.. i can not set the phone to fastboot, only flashboot... then i try to falsh ftf.. when i try to reboot, only vibrate but no screen boot n green LED on the start button...can anybody help??.. sorry for my english..

ThirtyOne34 said:
Hello dear readers and great XDA members,
Last summer I unlocked the bootloader of my Xperia Play R800i with the testpoint method. Everything worked fine: I installed CWM and loaded a FreeXperia version of CyanogenMod 9.1.
A couple of days ago, I wanted to finally update my ROM to a newer version since there had been so many releases since last summer. I loaded the new ROM and everything worked fine. However, some of the problems I hoped would've been solved by the update, weren't solved at all, especially the video capturing and panorama pictures. So I decided it maybe would be better to flash a new kernel.
I searched for a kernel, but couldn't find anything I liked. Then, I can't remember where, someone posted the "boot.img" files included in the FreeXperia CM9 ROM zip packages were kernel releases. So I decided to use flashtool and flash the boot.img as a new kernel.
This obviously didn't work and I tried some others. By the way: I couldn't boot into ClockWorkMod anymore since I tried to flash a new kernel. Only fastboot and flashmode would work.
I couldn't remember which kernel I used last summer, so I wandered the internet and eventually found that an X10 kernel was included in Flashtool. I though I remembered something about X10 from last summer, so I decided to stupidly flash that kernel to my Xperia Play.
After this flash completed, my phone doesn't respond to anything anymore. Following a list of things I tried (everytime after I tried something, I removed the USB cable and the battery to make sure the Xperia Play was turned off):
- When I press and hold the power button, nothing happens, not even the small vibrate always felt when the phone starts.
- Getting into fastboot mode doesn't work anymore (I tried with holding the search button and connecting USB, as well as some other buttons, nothing worked.)
- Getting into flashmode doesn't work either.
- No matter what I do, the phone won't give me a sign it's still alive. (no LED, no vibrate, no screen, nothing.)
- I tried the Sony Update Service, but that obviously doesn't recognize the phone
- Flashtool doesn't recognize the phone either.
- ADB doesn't recognize the phone of course.
- s1tool (the tool I used for the TestPoint bootloader unlock) recognizes I plug something in, but then gives an error it can't get access to it.
- I charged the battery overnight and tried all of the above again... still nothing works...
- When I plug in the phone to the PC, my PC recognizes something plugged in, but with the name QHSUSB_DLOAD in Device Manager.
(by the way: I am using Windows 8 Pro x64)
Is this phone completely dead or is there any way it can be saved? I was planning on keeping this phone at least until the end of 2013 or begin of 2014 before upgrading... An immediate upgrade is not in my budget and for now I have returned to my Nokia 5530 on Symbian, but that's nothing compared to Android :'(
Thank you very much in advance... I really hope someone can save my poor phone. I know I have been stupid, but I think I somehow panicked when I couldn't get the phone back into CWM and stupidly flashed the X10... Stupid stupid me.
Click to expand...
Click to collapse
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium

creative_md said:
Maybe you still have a chance! Bcoz I think you have completely damaged ta files+ semcboot which can only be repaired by se toolbox 3 which requires credits(money)( I m assuming it'll detect phone bcoz s1 tool recognized it with error ) if you have it than you can repair it or you can contact alejandressimo on gtalk.
Sent from my R800i using xda premium
Click to expand...
Click to collapse
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you!

Finally some one who has fixed a bricked phone
nickholtus said:
Could be easily fixed by flashtool, tried the same (flashing x10) and phone looked dead. The I toke the battery out and placed it back. Then I could enter flashmode and flash a stock ftf.
Sent from my LT22i using xda app-developers app
Click to expand...
Click to collapse
When you phone was dead after you put the battery in did you hold the power button then it went in to fast boot instead of holding thback button CORRECT? ²
---------- Post added at 05:19 PM ---------- Previous post was at 05:08 PM ----------
ThirtyOne34;38604501 01 said:
Really?! I really hope it'll work. I have a Galaxy Nexus now, but I desperately need a Gingerbread for testing my apps again...
Thank you![/QUOTE
Message me in myinbox and I will give you # so I can walk you through it. I have bricked my phone many time and a lot of people will tell you I'm wrong. But I'm right all I ask is that you reply to this tread and post that I know how to fix bricked phones.
Click to expand...
Click to collapse

Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony

Arbiterandrea said:
Hello I have the same your problem, are you by any chance managed to solve it? I have sent you to the sony center and have called irreparable ._. If it is true that Alejandro can fix it I wonder what may be the relevant industry professionals sony
Click to expand...
Click to collapse
Hello Arbiterandrea,
I am very sorry tot report that I wasn't able to fix my Xperia Play. I sent my phone back to the online store I bought it from and it arrived there 1 day before my guarantee expired. When I got my phone back, it was a brand new one with a different serial number, no screen protector, not a scratch. And it was for free thanks to my guarantee, even though I bricked it myself. (I just told them "it suddenly stopped working")
If you've got any guarantee left, you could try that, but if I understand correctly you already tried that... Then I think you should contact Allejandrissimo, I've heard many good things about him. I didn't contact him myself, though.
Good luck! And let me know if you have fixed it?
Greetings
ThirtyOne34

Xperia M stuck on Sony logo

Hey guys , my xperia m ( single sim ) is stuck on the sony logo whenever i try to boot it up.
I rooted my phone many months and it was perfect till this morning and then suddenly it got stuck at the sony logo.
Ive tried to fix it via the pc companion but it doesnt detect it . Now the battery has also run out so when i try to charge it , it shows the led for charging but then the sony logo comes up on its on and stays stuck there. Please help =(

That is a simple soft-brick/bootloop (depending on who you ask, I'd say bootloop).
Charge the phone for a couple of hours and then flash stock firmware with flashtool. To do this you will need to download the stock firmware ftf (these can ALL be found in the general section, don't ask for links) and also flashtool (http://www.flashtool.net/downloads.php). Move the ftf to the firmware folder to where you extracted flashtool to (the C: is the best bet).
Once you have both of those things and your phone has charge in it open flashtool. Then click on the lightning bolt icon and then flashmode. Select the firmware you have downloaded.
UNTICK Wipe cache and data.
Click flash.
Wait for flashtool to tell you to connect your phone in flashmode (do this by holding volume down (I think) while the phone is off and you are connecting the USB cable).
Wait for the firmware to finish flashing.
If you get an error saying that loader.sin has finished processing with errors open the ftf with WinRar (or something similar) and delete the loader.sin file and make sure that you save the changes to the ftf.
If you are still stuck on the Sony logo after flashing, remove your battery and then put it back in and try to turn on the device again. If you are still stuck on the Sony logo after that you will have to wipe the cache and data with flashtool.

Try sony pc companian support
Sent from my C2305 using XDA Free mobile app

I read about the flashing thing on other sites aswell but what i was worried about was the fact that since pc companion isnt dectecting my phone will the flash be able to go through considering the fact that since pc companion isnt dectecting it even the flash tool might not?

optimusbanana said:
I read about the flashing thing on other sites aswell but what i was worried about was the fact that since pc companion isnt dectecting my phone will the flash be able to go through considering the fact that since pc companion isnt dectecting it even the flash tool might not?
Click to expand...
Click to collapse
Flashtool will definitely detect it, don't worry. PC Companion needs the phone to actually be booted to be able to detect it, whereas flashtool only needs the phone to be in either fastboot mode or flash mode to detect it. Both of these modes are initiated by the user when they are plugging in the USB cable and holding the respective volume button and the phone is off.

gamer649 said:
Flashtool will definitely detect it, don't worry. PC Companion needs the phone to actually be booted to be able to detect it, whereas flashtool only needs the phone to be in either fastboot mode or flash mode to detect it. Both of these modes are initiated by the user when they are plugging in the USB cable and holding the respective volume button and the phone is off.
Click to expand...
Click to collapse
Thank you for helping me just btw
I know this'll annoy you a bit but the version that i have to flash it with is the stock one? Because i searched on the internet and some are with the 4.3 one and some are 4.2.2 so im a bit confused. Sorry im kind of a noob at this T_T

And flashtool first says that my phone is connected with usb debugging on then says phone is disconnected when its not :/

optimusbanana said:
Thank you for helping me just btw
I know this'll annoy you a bit but the version that i have to flash it with is the stock one? Because i searched on the internet and some are with the 4.3 one and some are 4.2.2 so im a bit confused. Sorry im kind of a noob at this T_T
Click to expand...
Click to collapse
Any stock firmware to the device will work, so it can be any of the 4.1.2 variants or and of the 4.3 variants (4.2 is for dual SIM). And don't worry about being a noob, all of us were at one point or another.
optimusbanana said:
And flashtool first says that my phone is connected with usb debugging on then says phone is disconnected when its not :/
Click to expand...
Click to collapse
When you are flashing a firmware be sure to keep the cable firmly connected throughout the entire process (use a different cable if the one you already have is a bit loose) and don't mess with the phone at all. Can you post the whole log you got from flashtool? Either in text form or through a screenshot?

Xperia ion bricked

The other day My ion LT28i wasnt connecting to data Which happens sometimes also with bluetooth. So I restarted it and bam bootloop. Basically took away most mods so far via adb. did not work. I could still load CWM and get into adb. I tried simulated battery kill a bunch of times. No result. wiped dalvik and cache. Nothing. Decided to flash system partition with stock rom. Flashed using flashmode rebooted too bootloop. Tried simulated battery pull again power+vol up. Once I completed this the phone was bricked cannot power. Cannot get into flashmode, nothing. Adb doesnt work, simulated battery pull doesnt vibrate anymore. Sony Pc companion now forces you to use flashmode to repair your phone So I cant repair it.
Ideas and suggestions would be awesome.
(update) Well Nothing was working so I dissasmebled my phone tried plugging it in after non removable battery disconnect and saw a red led. So hardware is fine. Connected it up and it went back too bootloop YAY! at least its booting. Did soft reset again and same issue. So I re -dissasembled and re assembled this time only pressing vol down and tada flashmode. What a pain in the AXX this has been. So connected to PC companion and sony has completely taken down xperia ion firmware WHAT IN THE ACTUAL FXXX SONY. SO NOW I need to find a LT28i.ftf and then I think Ill be back in business. Trouble is im having difficulty locating one. Finally found the actual jelly bean Rom for the lt28i Rogers on the forum. Ion forum must be dead. Does anyone even own an ion anymore lol. Zero replies.

psxpetey said:
The other day My ion LT28i wasnt connecting to data Which happens sometimes also with bluetooth. So I restarted it and bam bootloop. Basically took away most mods so far via adb. did not work. I could still load CWM and get into adb. I tried simulated battery kill a bunch of times. No result. wiped dalvik and cache. Nothing. Decided to flash system partition with stock rom. Flashed using flashmode rebooted too bootloop. Tried simulated battery pull again power+vol up. Once I completed this the phone was bricked cannot power. Cannot get into flashmode, nothing. Adb doesnt work, simulated battery pull doesnt vibrate anymore. Sony Pc companion now forces you to use flashmode to repair your phone So I cant repair it.
Ideas and suggestions would be awesome.
(update) Well Nothing was working so I dissasmebled my phone tried plugging it in after non removable battery disconnect and saw a red led. So hardware is fine. Connected it up and it went back too bootloop YAY! at least its booting. Did soft reset again and same issue. So I re -dissasembled and re assembled this time only pressing vol down and tada flashmode. What a pain in the AXX this has been. So connected to PC companion and sony has completely taken down xperia ion firmware WHAT IN THE ACTUAL FXXX SONY. SO NOW I need to find a LT28i.ftf and then I think Ill be back in business. Trouble is im having difficulty locating one. Finally found the actual jelly bean Rom for the lt28i Rogers on the forum. Ion forum must be dead. Does anyone even own an ion anymore lol. Zero replies.
Click to expand...
Click to collapse
Have your heard about the the tool called FLASHTOOL ?
You can easily flash FTF for your device using the tool and FORGET SONY companion.
This is where you can download it.
http://www.flashtool.net/index.php
Find on xda how to use it.If you still have questions, quote me.
Good Luck

why don't you try out the thread for bricked phones? Helps very well.

psxpetey said:
SO NOW I need to find a LT28i.ftf and then I think Ill be back in business. Trouble is im having difficulty locating one. Finally found the actual jelly bean Rom for the lt28i Rogers on the forum. Ion forum must be dead. Does anyone even own an ion anymore lol. Zero replies.
Click to expand...
Click to collapse
If all You need is ftf for Your version, You can download it using XperiFirm.