I recently broke my HOX+ and got a GNex for my replacement. Whenever I try to connect it, using another cable (Nexus 7) because its stock cable did not come with the phone (used) I get that pop up which says "Unable to recognize device" or sometimes an error. Though on all events, I get something called Error 43.
Anyone know how to fix this? Ive tried fixing to usb port. It is all stock. I just want to connect so I can root this thing.
Mikeonic said:
I recently broke my HOX+ and got a GNex for my replacement. Whenever I try to connect it, using another cable (Nexus 7) because its stock cable did not come with the phone (used) I get that pop up which says "Unable to recognize device" or sometimes an error. Though on all events, I get something called Error 43.
Anyone know how to fix this? Ive tried fixing to usb port. It is all stock. I just want to connect so I can root this thing.
Click to expand...
Click to collapse
Try installing samsung mtp drivers..
Sent from my Galaxy Nexus
Ive tried
mixtapes08 said:
Try installing samsung mtp drivers..
Sent from my Galaxy Nexus
Click to expand...
Click to collapse
I have tried installing drivers...still nothing..
I do assume you're using windows?
And my apologies, are you getting this error message when you try to root?
Were these the MTP drivers you installed?
http://www.samsung.com/us/support/owners/product/SCH-I515MSAVZW
iLeopard said:
I do assume you're using windows?
And my apologies, are you getting this error message when you try to root?
Were these the MTP drivers you installed?
http://www.samsung.com/us/support/owners/product/SCH-I515MSAVZW
Click to expand...
Click to collapse
Yes, Windows 7. Those were the ones and I want to root, but I can't even connect my phone. I'll plug in my GNex and it will charge through the computer though it will not be recognized nor connected for storage purposes.
Mikeonic said:
Yes, Windows 7. Those were the ones and I want to root, but I can't even connect my phone. I'll plug in my GNex and it will charge through the computer though it will not be recognized nor connected for storage purposes.
Click to expand...
Click to collapse
One thing you may want to try if you havent yet:
My Computer -> Right Click -> Properties -> Device Manager (On Sidebar) -> Find the GNex Drivers currently installed and remove them and reinstall (Re-plug) your phone so that the drivers can re-install.
Is this a used or new replacement?
iLeopard said:
One thing you may want to try if you havent yet:
My Computer -> Right Click -> Properties -> Device Manager (On Sidebar) -> Find the GNex Drivers currently installed and remove them and reinstall (Re-plug) your phone so that the drivers can re-install.
Is this a used or new replacement?
Click to expand...
Click to collapse
Unfortunately, the device appears as Unknown Device. It was my Uncles and it was able to work for him. So it bothers me how its not for me. At times even, when I connect the USB to the Device, it causes my Computer to Shut Down abnormally. So, either something is wrong and I need to fix it...or this phone is haunted,
Mikeonic said:
Unfortunately, the device appears as Unknown Device. It was my Uncles and it was able to work for him. So it bothers me how its not for me. At times even, when I connect the USB to the Device, it causes my Computer to Shut Down abnormally. So, either something is wrong and I need to fix it...or this phone is haunted,
Click to expand...
Click to collapse
Even after deleting it?
Did he by chance have it rooted prior to the ownership change?
Is the result replicated in other computers? If you haven't tried, do so. That way you can eliminate either your PC or the GNex as the culprit.
iLeopard said:
Even after deleting it?
Did he by chance have it rooted prior to the ownership change?
Is the result replicated in other computers? If you haven't tried, do so. That way you can eliminate either your PC or the GNex as the culprit.
Click to expand...
Click to collapse
He was stock at all times. Though when I got it, it seemed to be freshly restored...but 5 minutes into using the phone, it froze and gave a fixed screen of something being flashed...though even after I factory restored it again...It wont connect to my All in One PC, Desktop or Laptop, every other device I own connects properly .
Mikeonic said:
He was stock at all times. Though when I got it, it seemed to be freshly restored...but 5 minutes into using the phone, it froze and gave a fixed screen of something being flashed...though even after I factory restored it again...It wont connect to my All in One PC, Desktop or Laptop, every other device I own connects properly .
Click to expand...
Click to collapse
Wierd. Did you try a reset through the stock recovery or just defaults from the security menu?
Here's what I've done. I've pulled my drivers and compressed them. Update the "Unknown Device" from the Device Manager by pointing it to the extracted DLL's and see if that will work.
Drivers
iLeopard said:
Wierd. Did you try a reset through the stock recovery or just defaults from the security menu?
Here's what I've done. I've pulled my drivers and compressed them. Update the "Unknown Device" from the Device Manager by pointing it to the extracted DLL's and see if that will work.
Drivers
Click to expand...
Click to collapse
Been trying and it wont let me push those files and when I do, I get Code Error 10
Mikeonic said:
Been trying and it wont let me push those files and when I do, I get Code Error 10
Click to expand...
Click to collapse
Pushing them? Sorry for my poor explanation. Those files you downloaded are my working drivers that I managed to pull from:
C:\Windows\system32\DRIVERS\UMDF
C:\Windows\system32\DRIVERS\
C:\Windows\system32\
All you have to do is press START -> Type "Device Manager" -> Select the "Unknown Device" -> Press "Update Driver" -> "Browse my computer for driver software" -> Hit "Browse" and point to the folder were the DLL's are located in your computer (Once you have decompressed the archive of course)
iLeopard said:
Pushing them? Sorry for my poor explanation. Those files you downloaded are my working drivers that I managed to pull from:
C:\Windows\system32\DRIVERS\UMDF
C:\Windows\system32\DRIVERS\
C:\Windows\system32\
All you have to do is press START -> Type "Device Manager" -> Select the "Unknown Device" -> Press "Update Driver" -> "Browse my computer for driver software" -> Hit "Browse" and point to the folder were the DLL's are located in your computer (Once you have decompressed the archive of course)
Click to expand...
Click to collapse
It says there are no files in the folder...
UPDATE
It says it FOUND Drivers though cannot execute actions due to error 43
Mikeonic said:
UPDATE
It says it FOUND Drivers though cannot execute actions due to error 43
Click to expand...
Click to collapse
Honestly, I'm stumped. The drivers should have installed correctly regardless. This leads me to believe that its the GN acting up. Again, when you did a reset on it; Did you do it from the Security Submenu or from the Stock Recovery?
Is the device recognized under fastboot? ADB usually works fine there.
iLeopard said:
Honestly, I'm stumped. The drivers should have installed correctly regardless. This leads me to believe that its the GN acting up. Again, when you did a reset on it; Did you do it from the Security Submenu or from the Stock Recovery?
Is the device recognized under fastboot? ADB usually works fine there.
Click to expand...
Click to collapse
It was through the Settings SubMenu, I'll try a Fast boot
Mikeonic said:
It was through the Settings SubMenu, I'll try a Fast boot
Click to expand...
Click to collapse
Also try a factory reset via Stock Recovery. You should find it under the Fastboot menu
iLeopard said:
Also try a factory reset via Stock Recovery. You should find it under the Fastboot menu
Click to expand...
Click to collapse
Still nothing....this is hopeless
Mikeonic said:
Still nothing....this is hopeless
Click to expand...
Click to collapse
Wow, I'm truly amazed how nothing seemed to work. I don't think 1-Click Temp-Root Methods work on the GN, in which case you would use the terminal to Perm-Root it.
This happens on all computers?
Tried Different USB ports?
Rebooting PC?
iLeopard said:
Wow, I'm truly amazed how nothing seemed to work. I don't think 1-Click Temp-Root Methods work on the GN, in which case you would use the terminal to Perm-Root it.
This happens on all computers?
Tried Different USB ports?
Rebooting PC?
Click to expand...
Click to collapse
I will try getting a new USB, maybe a stock if I can find and see if that works. Wish I could root without a USB...Thank You for your help. I will update if anything.
Related
I'm running 4.1.1 and every time I plug my device in (With stock USB) I get "USB device not recognized"
I've tried another USB. I've downloaded Kies (Will only connect wifi), I've tried reinstalling drivers, I've tried using another computer as well. I've also enabled/disabled USB debugging,
The USB connection notification only appears sometimes, and even when it does my computer still won't recognize my S3. After I reinstall the drivers my phone does say "Connected as a Media device", but then the notification goes away..
FYI, I'm trying to root, that's why I need a direct connection with my computer so badly.
Does your computer has samsung kies?
You say drivers. Idk what u mean but all we need is samsung kies.
Rovon said:
I'm running 4.1.1 and every time I plug my device in (With stock USB) I get "USB device not recognized"
I've tried another USB. I've downloaded Kies (Will only connect wifi), I've tried reinstalling drivers, I've tried using another computer as well. I've also enabled/disabled USB debugging,
The USB connection notification only appears sometimes, and even when it does my computer still won't recognize my S3. After I reinstall the drivers my phone does say "Connected as a Media device", but then the notification goes away..
FYI, I'm trying to root, that's why I need a direct connection with my computer so badly.
Click to expand...
Click to collapse
This is a link I posted, if you searched you would have found.....
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
bikrame said:
Does your computer has samsung kies?
You say drivers. Idk what u mean but all we need is samsung kies.
Click to expand...
Click to collapse
Did you even read my original post...?
bobolinko said:
This is a link I posted, if you searched you would have found.....
http://forum.xda-developers.com/showthread.php?p=32906335#post32906335
Click to expand...
Click to collapse
I tried your method a few days ago, and it didn't work. I tried your method again.. it doesn't work.
I had this issue. All I did was get some good ol canned air and blew the dust out of my micro usb port. After that it connects just fine. Was about to do a warranty exchange before I did this.
Sent from my SGH-T999 using xda app-developers app
Beefvvl said:
I had this issue. All I did was get some good ol canned air and blew the dust out of my micro usb port. After that it connects just fine. Was about to do a warranty exchange before I did this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Tried that as well. Neither computer works. Blew into the phone as well ...
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
tester420 said:
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
Click to expand...
Click to collapse
Read his post, he is attempting to root. How does one backup their rom and restore with a stock recovery.
tester420 said:
Its your rom on the phone that's causing this. If you want to rule it out, why don't you just do a nandroid backup and install stock rom or perhaps the same rom clean from start. I had this issue before and it was fixed with reflashing clean rom.
Sent from S♣ with XDA App
Click to expand...
Click to collapse
I'm not rooted ...
I should probably mention the phone charges will of the USB cables but none of them work with the PC. I can't tell if it's a software issue or internal..
I think it's a computer issue, what was the other computer software you tried on?
mt3g said:
I think it's a computer issue, what was the other computer software you tried on?
Click to expand...
Click to collapse
Tried it with W7 & Mac, neither recognize the device. Android file transfer just tells me "no device found", and the Kies on mac doesn't work either.
I still won't update my computer from XP cause all I read are device errors with upgraded versions of windows... see if you can get your hands on XP and try. Just as insurance, you have gone through device manager and removed all drivers for the phone and then pushed the proper ones from Samsung, correct?
Rovon said:
I should probably mention the phone charges will of the USB cables but none of them work with the PC. I can't tell if it's a software issue or internal..
Click to expand...
Click to collapse
watch the screen closely when you connect the phone to the pc. does it even recognize thst some usb device was plugged in?
After a few moments, (with the phone still connected) click start,right click on my computer, select manage and select device manager.
are there any yellow question marks on the right side under the computer?
Open the modems (click the + sign) is there any SAMSUNG USB Modem? (should have no yellow question mark)
Open Universal Serial Bus controllers, do you see the samsung Mobile USB Composite Device?
There should be NO yellow question marks or exclamation marks anywhere on the right panel.
If there are, there is a problem with your computer settings/drivers or services.
If you followed my "cannot fail" steps EXACTLY in the order I had it, and did not skip anything, you should be without any problems with the modem connectivity. That includes the uninstallation of any samsung drivers previously installed.
If you do not even see the samsung modem, the cables or the phone may be your problem.
Post your results and I'll help you to get it working. Also mention what your compurter's OS is.
mt3g said:
Read his post, he is attempting to root. How does one backup their rom and restore with a stock recovery.
Click to expand...
Click to collapse
My bad, speed reading is not always good... thanks for pointing that out.
Anyway, did the OP ever get this resolved? Bobolinko's steps are thorough and if that didn't fix it, why don't you just try to go into download mode and ODIN a stock ROM with root injected into it already? It's another option...
Did you try buying a fresh new cable to connect the phone to the computer? I only have those issues with corrupted USB cable and a messy laptop...
Also when that notification appears for me I go to my phone USB section and tells it to mount as storage...and if its on storage I switch media than back to storage...always work for me.
Sent from my SGH-T999 using xda premium
bobolinko said:
watch the screen closely when you connect the phone to the pc. does it even recognize thst some usb device was plugged in?
After a few moments, (with the phone still connected) click start,right click on my computer, select manage and select device manager.
are there any yellow question marks on the right side under the computer?
Open the modems (click the + sign) is there any SAMSUNG USB Modem? (should have no yellow question mark)
Open Universal Serial Bus controllers, do you see the samsung Mobile USB Composite Device?
There should be NO yellow question marks or exclamation marks anywhere on the right panel.
If there are, there is a problem with your computer settings/drivers or services.
If you followed my "cannot fail" steps EXACTLY in the order I had it, and did not skip anything, you should be without any problems with the modem connectivity. That includes the uninstallation of any samsung drivers previously installed.
If you do not even see the samsung modem, the cables or the phone may be your problem.
Post your results and I'll help you to get it working. Also mention what your compurter's OS is.
Click to expand...
Click to collapse
As soon as I plug my S3 in, my computer recognizes a USB is active. In Device Manager, I do not have Samsung USB, all I have is "Unknown Device". I'm not sure what you mean by yellow exclamation point in the bottom right, but there's nothing in my notifications. However, I do get 2 yellow exclamations in device manager. One in Universal Series Bus, and one in other devices
Hi there.
Check this
On calls hit *#7284#
Check if pda is enabled then click on qualcomm settings and see if mtb+adb are enabled.
If not then just enable those.
Hope this is your problem.
Good luck.
Sent from my SGH-T999
Leoniums said:
Hi there.
Check this
On calls hit *#7284#
Check if pda is enabled then click on qualcomm settings and see if mtb+adb are enabled.
If not then just enable those.
Hope this is your problem.
Good luck.
Sent from my SGH-T999
Click to expand...
Click to collapse
I've tried this as well. I get this error:
"Connection problem or invalid MMI code"
The problem is with your computer, and not the phone. You CANNOT get it connected with a problem in the USB settings.
click on the yellow exclamation items and DELETE or UNINSTALL them. then reboot the machine and it should reinstall automatically. If your DRIVERS that are already in the machine are bad, you have to get them updated or replaced. uninstall KIES from the computer, reboot, and reinstall it. go to samsung's site and download and install the driver for your comuter.
The one for the xp is: SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
install it to your computer and be SURE there is no error while it installs.
then check again your device manager list for any yellow problem areas
connect the phone and wait a while, then, disconnect and wait about a minute
then again, connect the phone, and wait at least one minute. open the device manager page and see if there are any yellow area problems again.
are you positive you have the latest window updates?
you can sometimes right click on an item and do the driver update and fix a problem.
You clear all the COMPUTER END PROBLEMS you have and the phone will connect. That, my friend, you can take to the bank.
Good Luck!
Aloha,
post your results later
Hi,
I've already searched but couldn't find a topic with the same problem.
When I connect my m8 to my PC (Windows 8.1) he cannot find it.
I thought I had to install the drivers, so I went to Device Manager if there was any exclamation mark, but there wasn't one.
So now I don't know what to do, I hope someone can help me.
Because I want to upgrade my phone, but I have to upgrade my firmware first.
Thanks
Did you try installing HTC Sync?
Yes I've also did that, but without success
tommeke19 said:
Yes I've also did that, but without success
Click to expand...
Click to collapse
Just install HTC drivers or enable usb transfer file when you plug your phone into the com
I've installed the HTC drivers and again no success
I had the sae problem with a new PC, and found out that i was because i had USB 3 drivers installed.
I Uninstalled the usb 3 drivers and i could use adb again.
jkolner said:
I had the sae problem with a new PC, and found out that i was because i had USB 3 drivers installed.
I Uninstalled the usb 3 drivers and i could use adb again.
Click to expand...
Click to collapse
How do you delete them?
I've just formattted my laptop, so maybe everything would be factory and be 'OK'.
But reinstalled HTC Sync -> no success
Reinstalled the drivers -> No success
So I have no idea what to do know
tommeke19 said:
How do you delete them?
Click to expand...
Click to collapse
In Device Manager -> USB Controler. But be sure you have access to install them again
Reset the phone to factory settings.
tommeke19 said:
I've installed the HTC drivers and again no success
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=53049902&postcount=5
Try and see if it helps.
BerndM14 said:
http://forum.xda-developers.com/showpost.php?p=53049902&postcount=5
Try and see if it helps.
Click to expand...
Click to collapse
Again no success.
jkolner said:
In Device Manager -> USB Controler. But be sure you have access to install them again
Click to expand...
Click to collapse
Also no success, I don't know what to do know :-/
Try to uninstall HTC Sync and HTC drivers. Than connect the phone, do not select the option to automatically install Sync. Go to Device Manager, find the device. Select the option to manually select drivers. Than pick Generic MTP Android Device (or something similar).
redpoint73 said:
Try to uninstall HTC Sync and HTC drivers. Than connect the phone, do not select the option to automatically install Sync. Go to Device Manager, find the device. Select the option to manually select drivers. Than pick Generic MTP Android Device (or something similar).
Click to expand...
Click to collapse
Thanks for your reply, but again no success.
tommeke19 said:
Thanks for your reply, but again no success.
Click to expand...
Click to collapse
Well then it's a problem with your USB cable and/or port on the PC. Try a different port, try a different cable.
Well i tried a different cable and on a Windows 7 without success.
So now i realy dont know what to do
If tried an factory reset and flashed the lastest InsertCoin.
But it didn't worked, I guess I have to go back to my old rom.
Still nothing, anyone an idea?
Ive tried using robomodo, but no success
tommeke19 said:
Still nothing, anyone an idea?
Ive tried using robomodo, but no success
Click to expand...
Click to collapse
It seems like you tried everything. Another PC may be your only option at this point.
Did you disable the USB 3.0 drivers (if applicable)? I didn't see you respond either way on that particular suggestion.
When I Try to connect My Zenfone to PC & also trying to connect on debugging mode then it show display that debugging section is totally disabled & showing message "Device is in Charging mode, USB debugging is disabled.
&
2nd Problem is Media Device Not showing in Mobile & PC Also.
PLZ HELP & GIVE ME PERFECT SOLUTION
I have same problem. After switching over in my car to charging only - my Zenfone is also saying "Device is in Charging mode, USB debugging is disabled" I can't find any switch to take it back. Also the same with Media Device not showing in Mobile & PC.
How to make this working again???
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
wasiq224 said:
The PC connection mode on your phone is set to "Charge only". Idk about the stock ROM, but on CyanogenMod you just press the notification that shows up when you connect the phone to change the mode
Click to expand...
Click to collapse
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Hein_Mueck said:
Dear wasiq224,
Thanks for your answer, but is not working. I'm on CyanogenMod - but there is no notification shown up. Phone is quite and also PC - no message.
Even if I press under "STORAGE" -> "USB computer connection" the phone is saying: "USB is now disconnected". I checked already various menues for some settings without result. Google was also not help in this matter.
Click to expand...
Click to collapse
Try going to Developer Options>Disable USB Debugging, then reboot. Then connect your phone and try going to USB computer connection again, and enable whatever connection mode you want. You can re-enable USB debugging after that.
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Same Problem with my device .........
Hein_Mueck said:
Dear wasip224
Checked once more the debugging setting's. But if the phone is connected to the computer or not connected, disableing USB Debugging is not possible. This item is greyed out all the time. See attached pictures.
Best regards
Hein Mueck
Click to expand...
Click to collapse
Same Problem with my device .........
Same with me
ishantanish said:
Same Problem with my device .........
Click to expand...
Click to collapse
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
drahhen said:
With me is the same, i noticed that the Asus driver certificate is expired. If i disable windows driver signature verification it works.
Click to expand...
Click to collapse
How you did do this?? Did you uninstall the driver first? Where I can find this?
Hein_Mueck said:
How you did do this?? Did you uninstall the driver first? Where I can find this?
Click to expand...
Click to collapse
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
See picture
drahhen said:
I'm at work now, but you use Explorer and go to the folder where you extracted the drivers and use right-click --> properties in one of the files there. There is a tab that lists certificates. Just to be sure you can temporally disable driver signing verification.
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
This instructions works in windows 8.1 and 10.
Click to expand...
Click to collapse
It's in portuguese but on the right part of the image you can see "Valido a partir de XXXX até XXXX" wich means "Valid from XXXX to XXXX". It expired last month.
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
krasCGQ said:
Hi all,
Could you install latest Intel USB Driver from this link?
https://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
Reupdate the driver manually and let me know.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
Doesn't work for me, it says it cannot find the files. In my win10 install i have two problems, ADB only works if i disable driver signing verification and MTP doesn't work. I tried running sfc /scannow and it says WinUSB is corrupt and cannot be repaired (probably why MTP does not work). I tried using intel drivers for both and it does not work. Only ASUS works (but fails because of certificate) for ADB Composite Device, but mtp doesn't work anyway.
This tutorial could help you anyway.
http://forum.xda-developers.com/showthread.php?p=64093132
Sent from my ASUS_Z00AD
Dude i tried EVERYTHING, i flashed different roms and the issue persists
k1t4r0 said:
Dude i tried EVERYTHING, i flashed different roms and the issue persists
Click to expand...
Click to collapse
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
krasCGQ said:
On another PC, or via tutorial on a post before you...
Sent from my GT-I9500
Click to expand...
Click to collapse
Hi Kras and thank for the response!
I Tried it too but in my device manager it wont show any device related to asus nor adb.
Tryied to boot into TWRP but no MTP either.
I Tried USDBview but doesnt show. The strange fact is that the phone charges normally.
It happened after i switched to CHARGE ONLY... after that, could never go back "/
I think i´ll try to revert EVERYTHING to stock. Somethings not right.
Another information, the cellphone charges, i´ve tryied to unistall and reinstall every adb usb_driver but in driver manager, nothing appears, even an exclamation. Tried to force install drivers, nothing either. All this happened after set CHARGE MODE i´m so pissed off and frustrated
This is a shot in the dark, but in device manager you can click View>Show hidden devices.
From there you can truly uninstall all drivers, and then reboot and try reinstalling. Maybe this will help.
Also, different ports, different cables?
If it's just for file transfers have you also tried something like AirDroid or Dropbox/Google Drive/Mega?
Since the early October update of Nougat's, my Pixel C is not being recognized, or plainly shows up as MTP device and I'm unable to transfer. When in fastboot And adb the PixC's model# Does register. Ive updated Everything incl. WugFresh, Skipsoft and sdks. Please help!
iamkardde said:
Since the early October update of Nougat's, my Pixel C is not being recognized, or plainly shows up as MTP device and I'm unable to transfer. When in fastboot And adb the PixC's model# Does register. Ive updated Everything incl. WugFresh, Skipsoft and sdks. Please help!
Click to expand...
Click to collapse
Update the drivers on your PC.
Thank you, though have done. Right after i saw reply i found DriverBooster4 and it "updated 13 drivers" but i guess not the right ones
iamkardde said:
Thank you, though have done. Right after i saw reply i found DriverBooster4 and it "updated 13 drivers" but i guess not the right ones
Click to expand...
Click to collapse
You need to do it manually. Google "how to manually update drivers windows 10". Do it via device manager with your Pixel C plugged in.
did do. And also before have tried to "point the update to" sdk and Wug's folders. Am not a total noob, but braincells do die, I cant stop it! If it matters, I did just few days ago clean-"re"install win10 64 but this problem was b4 that.. hence the clean start over. All Im ever getting is MTP USB Device, or wen tab's in fastboot, Android ADB Device. Both say "best is already installed".
also have done the "disable driver enforce", i do that routinely now til this is solved..
iamkardde said:
also have done the "disable driver enforce", i do that routinely now til this is solved..
Click to expand...
Click to collapse
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
with plugged in, debug on and mtp on, it showed as portable devices/mtp usb device. it did install successfully (again); reboot using f7 and... nothing, still the same
iamkardde said:
with plugged in, debug on and mtp on, it showed as portable devices/mtp usb device. it did install successfully (again); reboot using f7 and... nothing, still the same
Click to expand...
Click to collapse
it no longer shows as "unknown".
iamkardde said:
it no longer shows as "unknown".
Click to expand...
Click to collapse
I can b a bit dense, so in case i forget, Thank you for your help!! will probab say this again later..
Thanks to cam30era for the helping!! Problem was simply my misuse of TB. No mystery or MS/Google conspiracy. I went back to stock, re-rooted and Voila!
Dropped phone, broken screen/digitizer, doesn't respond to touch
Was able to see the screen a bit yesterday but now its almost all black. I mainly just need my photos off it. Tried an RMA to replace the screen but they said they had to wipe everything first
Is there any way I can pull the photos off it? I haven't tried an otg yet, but I also can't see the screen, so im not sure it would help
Is there a screen sharing program I could get w/o first installing it on my phone?
I think my phone may be rooted, i forget if i ever did, but i dont have TWRP installed on it? (i dont super know what that is but i see other people talking about it)
Any thoughts on how to pull photos off it? I tried the adb devices but the cmd prompt doesn't seem to recognize the phone
Im quite sure I have debugging enabled, just coudln't get the file transfer button hit
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Explorer23 said:
Adb pull command should work, but you need to sort the drivers first (I'm guessing that's the issue).
Sent from my OnePlus 3 using Tapatalk
Click to expand...
Click to collapse
Ok cool, how would i go about sorting the drivers? o.0
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
side note.... wth is this image verification lol, ive tried like 30 of them, why is it so hard to post lol ><
Click to expand...
Click to collapse
Sorry, can't give definite answer, I know that I had an issue with drivers (device wasn't properly recognized) and tried pretty much everything that Google suggested ... Until it finally started working. I have no idea exactly what solved the issue, it was over a year and a half ago. The next time I clean installed Windows (10 in both cases) it was smart enough to automatically find right drivers.
So ... I'm guessing Googling something like "OnePlus 3 Windows # drivers" should find something useful?
About image verification: are you talking about anti-bot system that checks if you're human? Wouldn't know much about that, never personally had issues with it, but also very rarely see it on XDA as I'm nearly always checking this forum in Tapatalk app.
Sent from my OnePlus 3 using Tapatalk
jsaden said:
Ok cool, how would i go about sorting the drivers? o.0
Click to expand...
Click to collapse
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
tnsmani said:
If you had earlier connected your phone to the PC and authorised the PC connection on your phone, then it is a simple issue of disabling driver signature verification on Win 10 and installing the OnePlus drivers on it. Search for and download the correct drivers to your PC. Hold down Shift key and restart the PC. Choose Troubeshoot>Advanced Options>Startup Options and click Restart. On restarting, there will be a list of options. Choose 7 in the Options or click F7 on your keyboard and you will boot into the disabled mode. Now connect your phone and go to Device Manager in PC. Choose the phone which may be showing up as Unknown or with an yellow flag and right click and choose Update Driver. Navigate to the downloaded driver and install it. Now your phone should be properly recognised. Use adb pull command to copy whatever files you need to. Note that this driver signature verification disabling is temporary and when you restart the PC in the normal way, the PC will go back to the normal mode. But the installed drivers will still function.
Hope this helps.
Click to expand...
Click to collapse
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Had the same issue with my Lenovo P2. Only i didn't have debugging enabled. If you have, screen mirroring should be an easy solution. You could just see ur phone screen on ur computer that way. What helped me was to forceboot the phone to recovery with the hardware buttons, then connect it to ur pc. TWRP will automatically launch MTP. When u backed up evrything, you can wipe ur device through adb
jsaden said:
Oh wow, do you know if this works on Win7? And also I can't see my screen at all, so could I do adb pull of entire folder or hardrive kind of thing? I mainly just want phots, but i've never done adb stuff so not sure how it works
Click to expand...
Click to collapse
I don't know about Win 7. It will work on Win 10. Most likely, this should not be needed in Win 7 at all as the drivers should install whether signed or not.
Regarding copying data, a simple command of "adb pull /sdcard" will copy all the folders, files, data etc to your PC. You can also specify where you want the data copied to, simply add the path to the command above. This will work whether your screen works or not. Of course, there are other methods of copying data, you can search for it if you need it.