Develop Bugs

[Q] What kernel for my SGS3?

Ok so Im a little new to this hole rooting and flashing stuff and I've been reading around that the Ktoonsez KT747 Kernel has amazing battery life, even if you OC. So with this being said, im currently running SlimBean 2.7 but it doesn't say anywhere if it will support this kernel. Also can't find on Ktoonsez thread either. Maybe its me im blind when it comes to finding stuff. Thanks for help! If its necessary, I wouldnt mind flashing the CM10 M2.

DarthDerron said:
Ok so Im a little new to this hole rooting and flashing stuff and I've been reading around that the Ktoonsez KT747 Kernel has amazing battery life, even if you OC. So with this being said, im currently running SlimBean 2.7 but it doesn't say anywhere if it will support this kernel. Also can't find on Ktoonsez thread either. Maybe its me im blind when it comes to finding stuff. Thanks for help! If its necessary, I wouldnt mind flashing the CM10 M2.
Click to expand...
Click to collapse
From what I have read on the thread Ktoonsez kernel works fine

jasvncnt1 said:
From what I have read on the thread Ktoonsez kernel works fine
Click to expand...
Click to collapse
Well i just loaded the jellybean 10.9.2012 and it wouldn't boot like it should so ima try a different one if i can get it to boot
[FIXED] I flashed the wrong one i did the one said above instead of the one that had the att in the name of the kernel, so its flashed and booted so i will get back with you to tell you how it goes.
[WORKS] It works like a charm thanks for all of the help.

Try this kernel http://goo.im/devs/imoseyon/d2att/lk_aosp_jb_tmo-v1.4.zip
It's imoseyons kernel. He is an amazing dev. I only use this. I have used ktoonez idk why I don't use it all the time. It says this kernel is for tmo the but trust me it works the same. He is a modified version of interactive designed for the s3. I get EXTREMELY great battery life. Go over to original dev thread over in the tmobile thread and look for lean kernel.
Use the kernel I included only if your on a jelly Bean rom.
Transmitted from my GALAXYSIII running Jelly Bean. XDA premium

KT747 can be found HERE, in the Original Development forum. There are variants of the kernel that will work for several current versions of Android.

jasvncnt1 said:
From what I have read on the thread Ktoonsez kernel works fine
Click to expand...
Click to collapse
Thanks. I didn't notice it said for all AOSP roms lol derp.

I'm also very interested in flashing new kernel but I know it uses updated BT and WiFi drivers. Is there a link to the OEM drivers somewhere? I'd rather have them before I flash the kernel just in case.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

rmead01 said:
I'm also very interested in flashing new kernel but I know it uses updated BT and WiFi drivers. Is there a link to the OEM drivers somewhere? I'd rather have them before I flash the kernel just in case.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Stock AT&T Kernel - includes root and the default BT and WIFI drivers....just in case . Alternatively, you can simply backup the /system/lib/modules folder which contains these drivers.

[Q] cm10.1 compatible with ktoonsez kernel??

hello guys,
I'm new to the XDA forums and a bit of a noob. I have a rogers S3 and I'm currently running the latest CM 10.1 nightly from today. I love cyanogenmod and really want to try out a custom kernel for a better combo. I'm having trouble finding clear info on custom kernels available and compatible with my device and rom. I was very interested in the KT747 kernel by ktoonsez because of all the governors, schedulers, oc and uv options, etc. I don't know if that is compatible with cm10.1 and if it is where I can find the right version....I tried searching the forums to no avail so decided to start a new thread. Somebody please help steer me in the right direction.

Im pretty sure I saw people on rogers and people on cm10 using it. You can go to his thread and just search for cm10 rogers. I'm sure you'll find some info unless someone who knows for sure can answer you.
Or try posting the question in his thread....if you haven't already
Sent from my SGH-I747 using Tapatalk 2

gurdsang said:
hello guys,
I'm new to the XDA forums and a bit of a noob. I have a rogers S3 and I'm currently running the latest CM 10.1 nightly from today. I love cyanogenmod and really want to try out a custom kernel for a better combo. I'm having trouble finding clear info on custom kernels available and compatible with my device and rom. I was very interested in the KT747 kernel by ktoonsez because of all the governors, schedulers, oc and uv options, etc. I don't know if that is compatible with cm10.1 and if it is where I can find the right version....I tried searching the forums to no avail so decided to start a new thread. Somebody please help steer me in the right direction.
Click to expand...
Click to collapse
Yes it will work just fine, i am running it now with the same ROM.

Pbwizkid said:
Yes it will work just fine, i am running it now with the same ROM.
Click to expand...
Click to collapse
Thank you. Is there anyway you could post the link where I can get the kernel. I don't want to be one of those annoying people, but I really have no idea where to find the right version of kt747 that will be compatible and what version I even need. Thank in advance.

yep

I recommend using Tasks Underwear Kernel for CM.
http://forum.xda-developers.com/showthread.php?t=1766684 (It's on the first post under the heading kernel, with a dl link there)
I'm actually on Rogers too

Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

Just got the KT747 thread in orgianl development and down load the one for AOSP it you will be good to go

xhead said:
I recommend using Tasks Underwear Kernel for CM.
http://forum.xda-developers.com/showthread.php?t=1766684 (It's on the first post under the heading kernel, with a dl link there)
I'm actually on Rogers too
Click to expand...
Click to collapse
Thanks for the recommendation, but what are the features of that kernel? How has it been working for you? Also how does it differ from the KT747 kernel?

Pbwizkid said:
Just got the KT747 thread in orgianl development and down load the one for AOSP it you will be good to go
Click to expand...
Click to collapse
I'm still a bit confused because when I go to that thread, there are 3 downloads available. AOSP version for ICS and JB 4.1, and there is a third one that says JB 4.2 but it doesn't specify whether or not it is touchwiz or AOSP. I'm running CM10,1 which is android 4.2.2, so I do I download the JB 4.2 file?? I'm sorry to be annoying I just don't want to screw up my phone so I want to be clear before I do it. Thank you in advance.

gurdsang said:
I'm still a bit confused because when I go to that thread, there are 3 downloads available. AOSP version for ICS and JB 4.1, and there is a third one that says JB 4.2 but it doesn't specify whether or not it is touchwiz or AOSP. I'm running CM10,1 which is android 4.2.2, so I do I download the JB 4.2 file?? I'm sorry to be annoying I just don't want to screw up my phone so I want to be clear before I do it. Thank you in advance.
Click to expand...
Click to collapse
Yes, the 4.2 would be aosp. So far as I know there isn't a 4.2 version of touch wiz yet.
Sent from my SAMSUNG-SGH-I747 using xda premium

THANKS
thanks to everyone in this thread for helping with my inquiry, im currently running cm10.1 with kt747 and its a great combo..thanks again:good

xhead said:
I recommend using Tasks Underwear Kernel for CM.
http://forum.xda-developers.com/showthread.php?t=1766684 (It's on the first post under the heading kernel, with a dl link there)
I'm actually on Rogers too
Click to expand...
Click to collapse
thanks i looked into it but i read a lot of good things about kt747, i appreciate the advice tho

kennyglass123 said:
Please read forum rules before posting
Questions and help issues go in Q&A
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator
Click to expand...
Click to collapse
sorry about that, im a total noob...make sure i post in the right area next time...thanks

[Q] Kernel Sticky Thread Roll Up

Is there any sticky roll up thread with all the variants of kernel for S3, did a little search but no results.

Prufta said:
Is there any sticky roll up thread with all the variants of kernel for S3, did a little search but no results.
Click to expand...
Click to collapse
KT
http://forum.xda-developers.com/showthread.php?t=1756776
Deviant Kernel
http://forum.xda-developers.com/showthread.php?t=2124212
XI Kernel
http://forum.xda-developers.com/showthread.php?t=2076088
Ziggy Kernel
http://forum.xda-developers.com/showthread.php?t=2071616
Xone Kernel
http://forum.xda-developers.com/showthread.php?t=2119441
Faux Kernel
http://forum.xda-developers.com/showthread.php?t=1785489
Lean Kernel
http://forum.xda-developers.com/showthread.php?p=34636372

hednik said:
KT
http://forum.xda-developers.com/showthread.php?t=1756776
Deviant Kernel
http://forum.xda-developers.com/showthread.php?t=2124212
XI Kernel
http://forum.xda-developers.com/showthread.php?t=2076088
Ziggy Kernel
http://forum.xda-developers.com/showthread.php?t=2071616
Xone Kernel
http://forum.xda-developers.com/showthread.php?t=2119441
Faux Kernel
http://forum.xda-developers.com/showthread.php?t=1785489
Lean Kernel
http://forum.xda-developers.com/showthread.php?p=34636372
Click to expand...
Click to collapse
Thanked!!!

Exactly what i was looking for

nmrgoodnightn said:
Exactly what i was looking for
Click to expand...
Click to collapse
check the one linked in my sig as well. I think I changed a few links.

Paranoid Android 2.99?

I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.

hypocritelecteur said:
I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.
Click to expand...
Click to collapse
if u wanna use PA try 2.99. its way too stable for daily use.
& bdw there is 4.2.2(Evervolv) available stable version. U can try it.

hypocritelecteur said:
I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.
Click to expand...
Click to collapse
try Evervolv 4.2.2
EXTREMELY STABLE :silly::silly:

Maybe I am missing something but isn't evervolv missing most if not all of the features and options of PA?
If you could point me to the stable version of AOSPA 4.22 that would be great. I only can find the one thread that has the buggy version.

hypocritelecteur said:
Maybe I am missing something but isn't evervolv missing most if not all of the features and options of PA?
If you could point me to the stable version of AOSPA 4.22 that would be great. I only can find the one thread that has the buggy version.
Click to expand...
Click to collapse
PA is not stable at the moment so i suggest Evervolv
1ce will update his PA rom soon

Seraz007 said:
PA is not stable at the moment so i suggest Evervolv
1ce will update his PA rom soon
Click to expand...
Click to collapse
Maybe he wont.
Sent from my One V using xda premium

lars1216 said:
Maybe he wont.
Sent from my One V using xda premium
Click to expand...
Click to collapse
no prob by me
satisfied with evervolv

Seraz007 said:
no prob by me
satisfied with evervolv
Click to expand...
Click to collapse
So... you never answered--does Evervolv have the hybrid mode and cusotmization options of PA or is just a straight vanilla rom, because thats what it sounds like when I read the description.
And does anyone know how to get 2.99 working?

Evervolv is a vanilla rom.
Sent from my One V using xda premium

hypocritelecteur said:
So... you never answered--does Evervolv have the hybrid mode and cusotmization options of PA or is just a straight vanilla rom, because thats what it sounds like when I read the description.
And does anyone know how to get 2.99 working?
Click to expand...
Click to collapse
2.99 is working
just flash the hellboy kernel( not the 4.2 one)
or u can also try super sick kernel

So which hellboy kernel do I use? There are tons of them and not really labeled or explained coherently.
Do I just get the latest one?
Seraz007 said:
2.99 is working
just flash the hellboy kernel( not the 4.2 one)
or u can also try super sick kernel
Click to expand...
Click to collapse

i used this one here for PA 2.99
http://www.mediafire.com/?svp4x7vo15jp12f

Use Evervolv
I think you will be better off using Evervolv. I tried the april 27 version and it was very good. There is also a newer version now available.

Stock 4.3 Rooted - Best Kernel For Speed/Battery Life

Hey guys!
I'm currently running stock 4.3 that has been rooted. I'm looking for a Kernel to flash that will eliminate some of the lag and not completely destroy the Note II's battery life. I appreciate any and all recommendations.

iraqmilner said:
Hey guys!
I'm currently running stock 4.3 that has been rooted. I'm looking for a Kernel to flash that will eliminate some of the lag and not completely destroy the Note II's battery life. I appreciate any and all recommendations.
Click to expand...
Click to collapse
Not too many choices
Agni pureSTOCK or Devil2-2.3.2 t0lte dual. 20140102
Honestly, you're going to have to try them and see how your phone reacts. Some people's phone just go ape sh*t using Devils kernel, some take it well.
Nobody's phone is the same, yet everyone expects them to act the same. No one has the exact same apps, same kernel, same bootloader, etc etc. Yet, they come unglued when something does not work.
At this moment in time I am running [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin. With my apps and a couple of other build.props tweaks.
This came out recently (Devil2-2.3.2 t0lte dual. 20140102) so I'm trying it now.
I think Agni pureSTOCK is at v3.9.3. It's under Version Note II but I thought I read it works for ATT NOTE II also. Which I assume you have since that's where you posted the question.
I'm going to test that also. It takes a couple of days for the phone to settle in, so it would be unfair to flash a kernel and expect miracles. So a good practice is have the stock as backup to flash it the custom kernel barfs.
Stock kernel link, bottom of post #1
http://forum.xda-developers.com/showthread.php?t=2589891

Here's the latest Devil Kernel here:
https://copy.com/UDo2gthE0Us9zyn
And here's the Devil TOOLS 1.1.2 app, to set your kernel:
https://copy.com/MnltjSdT7HF0cwY
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Bajanman said:
Here's the latest Devil Kernel here:
https://copy.com/UDo2gthE0Us9zyn
And here's the Devil TOOLS 1.1.2 app, to set your kernel:
https://copy.com/MnltjSdT7HF0cwY
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Hey! I really appreciate you trying to help me with this. I'm sure others will appreciate it as well. By chance do you have a link to the AGNi kernel that works with the AT&T note 2? From what I have read, that may be the way to go.

dicksteele said:
Not too many choices
Agni pureSTOCK or Devil2-2.3.2 t0lte dual. 20140102
Honestly, you're going to have to try them and see how your phone reacts. Some people's phone just go ape sh*t using Devils kernel, some take it well.
Nobody's phone is the same, yet everyone expects them to act the same. No one has the exact same apps, same kernel, same bootloader, etc etc. Yet, they come unglued when something does not work.
At this moment in time I am running [ROM][4.3][Dec-2013] AT&T I317-UCUBMK6/MJ4 *Stock* Rooted Odex/De-Odex/Odin. With my apps and a couple of other build.props tweaks.
This came out recently (Devil2-2.3.2 t0lte dual. 20140102) so I'm trying it now.
I think Agni pureSTOCK is at v3.9.3. It's under Version Note II but I thought I read it works for ATT NOTE II also. Which I assume you have since that's where you posted the question.
I'm going to test that also. It takes a couple of days for the phone to settle in, so it would be unfair to flash a kernel and expect miracles. So a good practice is have the stock as backup to flash it the custom kernel barfs.
Stock kernel link, bottom of post #1
http://forum.xda-developers.com/showthread.php?t=2589891
Click to expand...
Click to collapse
Thanks for your assistance with this, sir. I really appreciate it. I think I'll pursue the AGNi kernel but I'm finding it difficult to locate the exact one for the i317. Do you happen to know which one will fit the bill?

iraqmilner said:
Thanks for your assistance with this, sir. I really appreciate it. I think I'll pursue the AGNi kernel but I'm finding it difficult to locate the exact one for the i317. Do you happen to know which one will fit the bill?
Click to expand...
Click to collapse
There's one here....
http://forum.xda-developers.com/showthread.php?t=2623354
Section VI: Downloads.
Modded Agni Kernel
PSN_pureSTOCK-v3.9_I317_4.3_OC-signed.zip
I haven't tried the 3.9.3 I found yet. The 7100's should work on our phone from what I have read.

dicksteele said:
There's one here....
http://forum.xda-developers.com/showthread.php?t=2623354
Section VI: Downloads.
Modded Agni Kernel
PSN_pureSTOCK-v3.9_I317_4.3_OC-signed.zip
I haven't tried the 3.9.3 I found yet. The 7100's should work on our phone from what I have read.
Click to expand...
Click to collapse
Thank you, brother ****!

iraqmilner said:
Hey! I really appreciate you trying to help me with this. I'm sure others will appreciate it as well. By chance do you have a link to the AGNi kernel that works with the AT&T note 2? From what I have read, that may be the way to go.
Click to expand...
Click to collapse
Sorry didn't get back you right away. Had to go pick up a friend from the greyhound station...
But DS got you covered below.
dicksteele said:
There's one here....
http://forum.xda-developers.com/showthread.php?t=2623354
Section VI: Downloads.
Modded Agni Kernel
PSN_pureSTOCK-v3.9_I317_4.3_OC-signed.zip
I haven't tried the 3.9.3 I found yet. The 7100's should work on our phone from what I have read.
Click to expand...
Click to collapse
Thanx @dicksteele:thumbup:
Edit: here's a direct link to Kernel.
http://forum.xda-developers.com/showthread.php?p=49227767
Sent from my SAMSUNG-SGH-I317 using Tapatalk

Bajanman said:
Sorry didn't get back you right away. Had to go pick up a friend from the greyhound station...
But DS got you covered below.
Thanx @dicksteele:thumbup:
Edit: here's a direct link to Kernel.
http://forum.xda-developers.com/showthread.php?p=49227767
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Click to expand...
Click to collapse
Sweet. Thanks for 3.9.3 !
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app