long story short:
1.att lumia 900
2.confirmed correct unlock code;
3.flash and add Chinese language before I enter the unlock code;
4.entered the unlock code,didn't work ;tried 10 times but didn't show the 32times PUK requirements like the" Unlocking Lumia 900 -- AT&T SIM/Network Lock Code Is Incorrect - FIXED! "
5.thought it might be the language issue.flashed back to the 7.5 original version. didn't work too
6.now the phone doesn't show up unlock required page.nor the 32 time puk requirements just no-service and emergency call only
7.the non-att sim card is activated and working .
so,it seems strange thing happened, can anyone tell me what can I do ? or how to pull up the 32 times puk page?
Hello to all the XDA DEveloper Forum !!!
Hi, this is my first post and a recomendation that I found in some sites, but I think shoul be usefull to have it here in XDA ( for beginners like me ) :
How to enter my Unlock Code on Nokia ?
=======================================
Nokia Lumia Input Instructions
1 - Insert a sim card that is not from the original network.
2 - Phone will now state the following:
This sim card can only be used on specific networks. Contact your customer service center for the unlock code. (it will also display how many attempts are left).
3 - Press the Enter Pin Button and enter your unlock code we supplied you to unlock your phone.
Nokia BB5 Code Input Instructions ( All Newish Nokia Phones are BB5)
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
To get letter P press * button quickly 3 times
To get letter W press * button quickly 4 times
To get letter + press * button quickly 2 times
3 - The phone show "SIM Restriction Off" and was unlocked !
Note: your unlock code is normally 15 digits long, sometimes you may get 2 codes for your nokia BB5 phone,
if this is the case the second code should be entered as #PW+CODE+1# just like the first code
IMPORTANT TIP ONLY FOR UK ORANGE LOCKED NOKIA
Some Orange UK Nokia codes may fail, if this is the case use +7# instead of +1# for the code to work
Nokia BB5 Models - with full keyboards (E5, E61 / E62 etc)
1. Insert a SIM Card not from the original network (IE one it's not locked to)
2. Turn on the handset - Undo request will display, press undo if prompted. (your phone may display "sim not recognised" if this is the case just start entering your code as in step3)
3. Enter the unlocking code #pw+YOURCODEHERE+1#
4. The phone will now unlock.
Nokia BB5 Code Error Problem Help
A lot of Nokia BB5 models require that you force the code to unlock it.
We are noticing this error problem more and more with newer Nokia BB5 phones, even if no attempts have been used on the phone.
Also, if your Nokia phone has had too many wrong attempts (3 + Attempts) using wrong unlock code from unreliable source, then your phone will display one of the following: "Not Allowed" or "Cannot undo restriction". If you have this problem, then use the force code method below
How To Force Nokia BB5 Code
Please follow these steps?
1. Download the program SendCodeUsb.exe (Don't run it just yet.) aka. : " NOKIA BB5 CODE USB SENDER "
2. Download and Install the latest Nokia PC Suite (This installs the phone drivers)
3. Connect your phone to the PC and select PC Suite on your phone screen, then wait for all the drivers to install.
4. Run the 'SendCodeUsb.exe' program.
5. Click the 'Read Phone Info' button to check the connection, you will also see some info about your phone.
6. Tick the 'Check for FBus' option.
7. Enter the unlocking code supplied into the 'Unlock Code (15 digits)' box. NOTE: only enter the middle numbers part
EG if your code is #pw+418636523456123+1#, then just enter 418636523456123
8. Next, select the Lock 'Level (1-7)'. this should be set at 1.
9. Finally Click the 'Send Unlock Code' button to send the code to the phone and unlock it.
Also Note: Some newer Nokia models like X3-02 and others cannot have their code forced by the software in the image above.
So you need to reset the key counter back to zero first using this alternative Nokia Key Counter Reset Software, then enter your code manually via the phones keypad in the normal way
=======================================
Nokia DCT4 Models (Older phones)
1. Turn on your phone without a SIM Card in it
2. Enter the unlocking code # p w + YOUR_CODE_HERE + 1 #
3. The phone will now unlock.
Note: Use the codes ending with either +1#, +7# or even +5#.
=======================================
Models : Nokia DCT3 (Oldest)
1. Turn on your phone without a SIM Card in it
2. Enter the unlocking code # p w + YOUR_CODE_HERE + 1 #
3. The phone will now unlock.
Note: Use the codes ending with either +1# or +2# only.
If the above method fails try inserting a locked SIM (IE one that the phone will not accept) and try the unlock code again.
=======================================
Problems with code supplied?
Firstly Double check the code you ordered by comparing the IMEI submitted with the one on your phone (Type *#06#) if it is different. Also double check that you requested the correct network that the phone is currently locked to.
Nokia unlocking code examples
Examples for newer Nokia phones (BB5)
# P W + 272418983456123 + 1 #
# P W + 474942813456123 + 1 #
or
Examples for older Nokia phones (DCT)
# P W + 418636523456123 + 1 #
# P W + 447313183456123 + 2 #
# P W + 928488673456123 + 3 #
# P W + 107081713456123 + 4 #
# P W + 569525293345612 + 5 #
# P W + 724068043456123 + 6 #
# P W + 146860153456123 + 7 #
I hope it will help somebody. See you, thanks. :good:
Weird - I'm use to seeing these types on posts with a link in somewhere.
^ tell me about it
Hi.., how to identify if my nokia is bb5 or what base b and it is? And also how to know if it is dct2 dct3 or dct4? Thanks in advance
bb5 devices has nokia code sender what about dct4 devices? now may nokia 50002-d is on cannot undo restriction error
nokia asha 201
please tell me how can I unlock a Nokia Asha 201?
thanks
Kruguer said:
Hello to all the XDA DEveloper Forum !!!
Hi, this is my first post and a recomendation that I found in some sites, but I think shoul be usefull to have it here in XDA ( for beginners like me ) :
How to enter my Unlock Code on Nokia ?
=======================================
Nokia Lumia Input Instructions
1 - Insert a sim card that is not from the original network.
2 - Phone will now state the following:
This sim card can only be used on specific networks. Contact your customer service center for the unlock code. (it will also display how many attempts are left).
3 - Press the Enter Pin Button and enter your unlock code we supplied you to unlock your phone.
Nokia BB5 Code Input Instructions ( All Newish Nokia Phones are BB5)
1 - Switch ON your phone without SIM Card,
2 - Compose #PW+CODE+1#
To get letter P press * button quickly 3 times
To get letter W press * button quickly 4 times
To get letter + press * button quickly 2 times
3 - The phone show "SIM Restriction Off" and was unlocked !
Note: your unlock code is normally 15 digits long, sometimes you may get 2 codes for your nokia BB5 phone,
if this is the case the second code should be entered as #PW+CODE+1# just like the first code
IMPORTANT TIP ONLY FOR UK ORANGE LOCKED NOKIA
Some Orange UK Nokia codes may fail, if this is the case use +7# instead of +1# for the code to work
Nokia BB5 Models - with full keyboards (E5, E61 / E62 etc)
1. Insert a SIM Card not from the original network (IE one it's not locked to)
2. Turn on the handset - Undo request will display, press undo if prompted. (your phone may display "sim not recognised" if this is the case just start entering your code as in step3)
3. Enter the unlocking code #pw+YOURCODEHERE+1#
4. The phone will now unlock.
Nokia BB5 Code Error Problem Help
A lot of Nokia BB5 models require that you force the code to unlock it.
We are noticing this error problem more and more with newer Nokia BB5 phones, even if no attempts have been used on the phone.
Also, if your Nokia phone has had too many wrong attempts (3 + Attempts) using wrong unlock code from unreliable source, then your phone will display one of the following: "Not Allowed" or "Cannot undo restriction". If you have this problem, then use the force code method below
How To Force Nokia BB5 Code
Please follow these steps?
1. Download the program SendCodeUsb.exe (Don't run it just yet.) aka. : " NOKIA BB5 CODE USB SENDER "
2. Download and Install the latest Nokia PC Suite (This installs the phone drivers)
3. Connect your phone to the PC and select PC Suite on your phone screen, then wait for all the drivers to install.
4. Run the 'SendCodeUsb.exe' program.
5. Click the 'Read Phone Info' button to check the connection, you will also see some info about your phone.
6. Tick the 'Check for FBus' option.
7. Enter the unlocking code supplied into the 'Unlock Code (15 digits)' box. NOTE: only enter the middle numbers part
EG if your code is #pw+418636523456123+1#, then just enter 418636523456123
8. Next, select the Lock 'Level (1-7)'. this should be set at 1.
9. Finally Click the 'Send Unlock Code' button to send the code to the phone and unlock it.
Also Note: Some newer Nokia models like X3-02 and others cannot have their code forced by the software in the image above.
So you need to reset the key counter back to zero first using this alternative Nokia Key Counter Reset Software, then enter your code manually via the phones keypad in the normal way
=======================================
Nokia DCT4 Models (Older phones)
1. Turn on your phone without a SIM Card in it
2. Enter the unlocking code # p w + YOUR_CODE_HERE + 1 #
3. The phone will now unlock.
Note: Use the codes ending with either +1#, +7# or even +5#.
=======================================
Models : Nokia DCT3 (Oldest)
1. Turn on your phone without a SIM Card in it
2. Enter the unlocking code # p w + YOUR_CODE_HERE + 1 #
3. The phone will now unlock.
Note: Use the codes ending with either +1# or +2# only.
If the above method fails try inserting a locked SIM (IE one that the phone will not accept) and try the unlock code again.
=======================================
Problems with code supplied?
Firstly Double check the code you ordered by comparing the IMEI submitted with the one on your phone (Type *#06#) if it is different. Also double check that you requested the correct network that the phone is currently locked to.
Nokia unlocking code examples
Examples for newer Nokia phones (BB5)
# P W + 272418983456123 + 1 #
# P W + 474942813456123 + 1 #
or
Examples for older Nokia phones (DCT)
# P W + 418636523456123 + 1 #
# P W + 447313183456123 + 2 #
# P W + 928488673456123 + 3 #
# P W + 107081713456123 + 4 #
# P W + 569525293345612 + 5 #
# P W + 724068043456123 + 6 #
# P W + 146860153456123 + 7 #
I hope it will help somebody. See you, thanks. :good:
Click to expand...
Click to collapse
Hi
I have Nokia 208 locked to Vodafone Australia (RM-957) and I have purchased the unlock code from them.It has 20 digit unlock code.But when I enter the unlock code it shows "not allowed". So I tried to reset the counter to zero by using the 'Nokia BB5 USB utility.exe'. It shows counter reset OK.But still it shows the same error.I tried sending the first 15 digits of the unlock code and it shows phone unlocked.But still the phone is locked.Anybody please help to reset the counter to zero...
Hello guys recently my parrents made me a present :Alcatel OT 991 it's not so good but still...it's a present.And i've been tryed to root it and now it's locked. It says enter ME code unlock sim...
Here is my IMEI 862601012785517
And provider number 991X-2KRGES3-S40
Please give me the code because i didn't tell of what happened to my parrents and i'm very nervous Please help me.Thank's
Please
medox9 said:
:laugh:
Click to expand...
Click to collapse
Come on guys pleaseeee
wait for some time hope experts will help u
Nobody??
To unlock Alcatel the IMEI number is required, u need to get also ID provider.
ID Provider is shown on a sticker under battery.
Now, Switch ON your Alcatel with a NOT ACCEPTED SIM Card,
2 - When the message "Enter Network Key" appears, enter the Unlock Code.
*NOT ACCEPTED : means, to use a sim card from a network other than the network your Alcatel is locked to.
OR
1 - Switch ON your Alcatel WITHOUT SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
hp6830s said:
To unlock Alcatel the IMEI number is required, u need to get also ID provider.
ID Provider is shown on a sticker under battery.
Now, Switch ON your Alcatel with a NOT ACCEPTED SIM Card,
2 - When the message "Enter Network Key" appears, enter the Unlock Code.
*NOT ACCEPTED : means, to use a sim card from a network other than the network your Alcatel is locked to.
OR
1 - Switch ON your Alcatel WITHOUT SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.
Click to expand...
Click to collapse
I don't have the unlock coooodeee
Had purchased an ZTE Flip phone for $39 at AT&T San Francisco year back and used for couple of months. Now it is in India and I would like to use this for my father. However it requires unlock PIN
I tried raising request with AT&T support no help so far even though I provided my purchase receipt. Can someone help me ??
Regards
sorry for bump but this is what they gave me to do and it worked im sure its only device specific though.
UNLOCK CODE: 7944095643573280
We have reviewed your request and confirmed that the device may be unlocked. Please allow 24 hours upon receipt of this notification to complete the unlock process.
To unlock your device, simply:
Five unsuccessful unlock attempts permanently locks the device to the AT&T network.
1)
ZTE Unlock Using a Non-AT&T SIM Card
1.Insert a non-AT&T SIM card.
2.Power on the device.
3.The device displays “Phone locked. Please insert a valid SIM card.”
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
ZTE Unlock Using an AT&T SIM Card
1.Insert an AT&T SIM card.
2.Power on the device.
3.Enter *983*865625# in idle mode.
4.Select Unlock (left soft key).
5.The device displays “Please enter network unlock code (16 digits). Remaining: X.”
6.Enter the 16-digit unlock code.
7.Select OK (left soft key).
8.Select OK to reset the device.
Thank you for your business. For other questions about our AT&T wireless service or other Mobile devices, please visit att.com
I've just bought a used G4 from Music Magpie which is locked to Vodafone. I've put a new Three SIM in it, and was expecting to be prompted for a SIM unlock code, but I'm not. Does anyone know how I can enter a SIM unlock code?
Finally managed to find a solution to display the SIM unlock menu: open the phone app and type this:
2945#*xxx# (where xxx is the model number - 815 in this case)